Military Engineer Services-MES has published Providing Of Stn Squach Court At Itarana Mil Stn Alwar. Submission Date for this Tender is 18-07-2020. Man Power Supply Tenders in Alwar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jun-2020 | DATE CORRIGENDUM | Date | 11-07-2020 |
| 2 | 30-Jun-2020 | BOQ CORRIGENDUM | BOQ | 11-07-2020 |
| 3 | 11-Jul-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-07-2020 |
| 4 | 17-Jul-2020 | Amendment | Other | 18-07-2020 |
| Name of Work : PROVN OF STN SQUACH COURT AT ITARANA MIL STN ALWAR | |||||
|---|---|---|---|---|---|
| Srl. No. | Item Description | Item Code / Make | Approx No of units reqd | Units | |
| 1 | 1 | B/R ITEMS\nExcavation in trenches, n exc 1.50 m wide and n exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed | 152 | Cubic Metre | |
| 2 | 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. | 92 | Cubic Metre | |
| 3 | 3 | Removing excavated surplus material (Soils) to a distance not exceeding 500 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 135 | Cubic Metre | |
| 4 | 4 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loosed soil complete all as specified and directed. | 250 | Square Metre | |
| 5 | 5 | Removing excavated surplus material to a distance exceeding 1.5 km and n exc. 5 KM depositing where directed above the starting point complete all as specified and directed. | 22.5 | Cubic Metre | |
| 6 | 6 | M & L for 75mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed | 60 | Square Metre | |
| 7 | 7 | M&L for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B1 using 20mm graded stone aggregate with plan or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:4, making good disturbed surface of ground complete all as specified and directed. | 4.8 | Cubic Metre | |
| 8 | 8 | M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed . | 0.06 | Cubic Metre | |
| 9 | 9 | M & L 25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in flooring, laid over PCC sub base, surface finished and even without using extra cement complete all as specified and directed. | 5 | Square Metre | |
| 10 | 10 | M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. | 3.2 | Cubic Metre | |
| 11 | 11 | M & L for100mm thick cement concrete(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. | 100 | Square Metre | |
| 12 | 12 | M&L for modular brick work with sub class 'B' straight or curved on plan exc 6m mean dadius built-in cement mortar 1:6 complete all as specified and directed. | 18 | Cubic Metre | |
| 13 | 13 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean dadius built-in cement mortar 1:6 complete all as specified and directed. | 3 | Cubic Metre | |
| 14 | 14 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. | 75 | Cubic Metre | |
| 15 | 15 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc. 10 mm over UG cable for protection and complete all as specified and directed. | 0.83 | Per 1000 Nos | |
| 16 | 16 | M &L for dry sand and punning for cushioning to under ground cable, complete all as specified and directed. \nNote:- For the purpose of payment only punned thickness shall be meausred. | 8.1 | Cubic Metre | |
| 17 | 17 | M & L for PCC 1:2:4 type B-2, using 20 mm graded stone aggregate as in shelves etc complete as specified and directed. | 1.08 | Cubic Metre | |
| 18 | 18 | M & L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in sub floor, sub base etc complete all as directed. | 6 | Cubic Metre | |
| 19 | 19 | M & L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains, complete all as specified and directed. | 0.1 | Cubic Metre | |
| 20 | 20 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed. | 2.4 | Running Metre | |
| 21 | 21 | M&L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns ect, basement slabs, under reamed piles and mass concrete complete all as specified and directed. | 15 | Cubic Metre | |
| 22 | 22 | M&L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in columns, pillars piers, posts & struts etc complete all as specified and directed. | 12 | Cubic Metre | |
| 23 | 23 | M&L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in lintel beam, roof beam etc complete all as specified and directed. | 12 | Cubic Metre | |
| 24 | 24 | M&L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in roof slab etc complete all as specified and directed. | 26 | Cubic Metre | |
| 25 | 25 | M&L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in chajjas etc complete all as specified and directed. | 0.5 | Cubic Metre | |
| 26 | 26 | Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed. | 139 | Square Metre | |
| 27 | 27 | Use and waste of flat formwork to sides of pillars, posts, struts, piers,columns and stanchions for rough finished surfaces of concrete square rectangular or polygonal complete all as specified and directed. | 120 | Square Metre | |
| 28 | 28 | Use and waste of flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed. | 145 | Square Metre | |
| 29 | 29 | Use and waste of flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work attached pillasters, buttresses etc vertical or to better complete all as specified and directed. | 152 | Square Metre | |
| 30 | 30 | Use and waste for formwork to chajjas, louvers fascia, slab and similar items including edges and surfaces finished even and fair complete all as specified and directed. | 11 | Square Metre | |
| 31 | 31 | M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6, surface finished and smooth without using extra cement complete all as specified and directed. | 360 | Square Metre | |
| 32 | 32 | M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. | 150 | Square Metre | |
| 33 | 33 | M&L for rendering 5 mm thick in cement mortar 1:3 as in ceiling, below chajja and shelves and finished even and smooth complete all as specified and directed. | 160 | Square Metre | |
| 34 | 34 | M & L for rendering 15mm thick in two layers on brick work or concrete surfaces in two layers, first layer 10mm thick in cement mortar 1:4 and second layer 5mm thick in CM 1:4 mixed WPC, finished even and smooth without using extra cement complete all as specified and directed\n(Note :- Supply only WPC shall be measured and paid separately) | 430 | Square Metre | |
| 35 | 35 | Supply only water proofing compound complete all as specified and directed. | 118 | Kilogram | |
| 36 | 36 | M & L cutting and inserting TEE, L Bow, Bend/Collar and tapping the connection from the existing 50mm GI tubing line for taking branch connections including tapping accessories complete all as specified and directed. | 1 | Each Job | |
| 37 | 37 | M & L 150mm bore reinforcement concrete pipes, clas NP-2, laid and jointed complete with collars including tested, complete all as specified and directed. | 20 | Running Metre | |
| 38 | 38 | M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including packing under, and haunching agianst the sides of pipes to RCC drain pipe 150 mm internal dia after they are laid and tested complete all as specified and directed.\nNote :- The rates included for any necessary shuttering and supports to concrete and for laying beds to fall. | 20 | Running Metre | |
| 39 | 39 | Construction of septic tank in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab cover etc for 25 users, compelte all as specified and directed. \nDrg No. : CEJZ/2002/TD/S-2, Sheet No. 1/1. | 1 | Each | |
| 40 | 40 | Construction of sockage well 1.8m dia x 3mtr deep complete including exc, PCC, brick work RCC cover slab etc., compelte all as specified and directed.\nDrg No. : CEJZ/2004/TD/S-35, Sheet No. 1/1. | 1 | Each | |
| 41 | 41 | M &L precast cement concrete 1:2:4 type B-1 manhole cover slab in window or door cills, lintels, bressumers, steps, quoin blocks (For use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated) with plain fair faces, including chamfers, weatherings, throating etc, and setting in mortar complete with joints to match including set in CM 1:6, complete all as specified and directed. | 0.12 | Cubic Metre | |
| 42 | 42 | M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed. | 400 | Square Metre | |
| 43 | 43 | M & L for preparation of surfaces and applying two coats of oil bound distemper over a coat of primer as in wall surfaces complete all as specified and directed. | 660 | Square Metre | |
| 44 | 44 | M & L for approved earth filling in floors of paving laid in layers not exceeding 15cm thick including spreading levelling watering and consolidation complete all as specified and directed. | 75 | Cubic Metre | |
| 45 | 45 | M&L for hard core of broken stone or boulders of gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick watered & rammed to true surface complete all as specified and directed. | 5 | Cubic Metre | |
| 46 | 46 | Preparation of new concrete surface of any descritpion over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint of alternate tint as complete all as specified and directed. | 2.5 | Square Metre | |
| 47 | 47 | M&L for vitrified Ceramic tiles light shade 7 to 10 mm thick as in floor (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm and including 15 mm thick screed bed in CM (1:4) laid on floors etc.set and jointed in neat cement slurry and pointed in white complete all as specified and directed. | 100 | Square Metre | |
| 48 | 48 | M&L for vitrified Ceramic tiles light shade 10 mm thick as in verticle surfaces (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm and including 15 mm thick screed bed in CM (1:4) laid on floors etc.set and jointed in neat cement slurry and pointed in white complete all as specified and directed. | 30 | Square Metre | |
| 49 | 49 | S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube fixing in opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010). | 5 | Running Metre | |
| 50 | 50 | S&F 40mm bore steel water tubing, galvanized, medium grade, with all fittings,laid in trenches complete all as specified and directed | 100 | Running Metre | |
| 51 | 51 | Supplying, fixing, jointing and testing galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc, fixed to walls and ceiling or laid in complete all as specified and directed for the following sizes:- | |||
| 52 | 51.1 | 15mm dia | 28 | Running Metre | |
| 53 | 51.2 | 20mm dia | 40 | Running Metre | |
| 54 | 52 | S & F ball valve high pressure of PTMT suitable for 25mm bore pipe (minimum weight -455 gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as directed. | 2 | Each | |
| 55 | 53 | M&L for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed. | 5 | Each | |
| 56 | 54 | S & F vitreous china wash basin, white, flat back, size 550 x 400 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. | 2 | Each | |
| 57 | 55 | S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with superior quality water jet including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.\nNote:- Plastic seat cover shall be measured separately as supply only as considered under respective items. | 1 | Each | |
| 58 | 56 | S&F Vitreous china bowl urinal flat back, size of 465 X 355 X 265 mm white with grating and union for discharge pipe including, waste pipe and PVC connection, bedding urinal against wall in cement mortar 1:2 securing urinal to, plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.. | 2 | Each | |
| 59 | 57 | S & F 100mm cast iron sanitary connection socket to fit WC outlet, complete all as specified and directed. | 2 | Each | |
| 60 | 58 | S&F PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed in repairs all as specified and directed . | 1 | Each | |
| 61 | 59 | S & F 32mm bore size low density polythene pipes (LDPE) of pressure rating 5 kgf/Sqcm, completed to walls, ceiling or in floors, complete all as specified and directed. | 10 | Running Metre | |
| 62 | 60 | S & F 75mm bore PVC (SWR) vent cowl, including taking down existing unserviceable cowl, complete all as specified and directed. | 1 | Each | |
| 63 | 61 | "S&F 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as directed. | 2 | Each | |
| 64 | 62 | S & F 5.5mm thick sheet glass ordinary froasted and glazing with beading and rubber gasket in one side in square exc 0.5 sq. m in each pane complete all specified and as directed. | 5 | Square Metre | |
| 65 | 63 | M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of steel heavy duty of size 125x240x60mm and fixed, complete all as specified and directed. | 3 | Each | |
| 66 | 64 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II. | 1.5 | Square Metre | |
| 67 | 65 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel , ISI marked complete all as specified and directed. | 6 | Each | |
| 68 | 66 | S & F powder coated aluminium butt hinges 125mm long with screwes complete all as specified and directed. | 3 | Each | |
| 69 | 67 | S & F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed. | 2 | Each | |
| 70 | 68 | S&F 150mm size aluminium handle, cast type anodised complete all as specified and directed. | 2 | Each | |
| 71 | 69 | M & L cutting chases for concealed water tubing, pinning in, making good fo facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10cm or girth complete all as specified and directed. | 28 | Running Metre | |
| 72 | 70 | M & L for reinforcement TMT bars 6 to 8 mm mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. | 15 | Kilogram | |
| 73 | 71 | M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. | 7800 | Kilogram | |
| 74 | 72 | M & L for TMT bars 5 mm dia and over upto and including 8mm dia in strrups spacers and binders quality conforming to TMT bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. | 1800 | Kilogram | |
| 75 | 73 | Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed | 70 | Running Metre | |
| 76 | 74 | Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium windows and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated anodised aluminium fittings such as peg stays 150mm long (01 No. for each leaf), Butt hinges type B-21 100mm size (02 Nos for each leaf) & handle (01 No for each leaf) etc complete all as specified and directed. \n(Note :- Glazing shall be measured and paid separately under respective items of Schedule. | 15 | Square Metre | |
| 77 | 75 | Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated aluminium fittings, such as handle (01 No for each leaf) etc complete all as specified and directed. \n(Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule. | 15 | Square Metre | |
| 78 | 76 | S&F rotational moulded polythylene water tanks triple layers (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 500 Ltrs and including all necessary fittings complete all as specified and directed. | 2 | Each | |
| 79 | 77 | M&L for laying 60mm thickness machine pressed precast concrete glazed coloured interlocking paver block with any shape and size confirming to IS 15658-2006 M-35 grade grey cement and pigment over and including 25mm thick sand cushioning complete all as specified & directed. | 100 | Square Metre | |
| 80 | 78 | Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt (weighing not less than 150 gm/Sqm), with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed.\nNote :- (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, applied@1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimeny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate. | 170 | Square Metre | |
| 81 | 79 | M & L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in padding and levelling course on roof and terrace laid to a minimum consolidated thickness of 50mm, finished even & fair, laid and compacted in slope complete all as specified & directed. | 7 | Cubic Metre | |
| 82 | 80 | M & L treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed. | 78 | Square Metre | |
| 83 | 81 | M & L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substracture in contact with backfill to be measured) complete all as specified and directed. | 150 | Square Metre | |
| 84 | 82 | M & L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. | 158 | Square Metre | |
| 85 | 83 | M & L treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. | 60 | Square Metre | |
| 86 | 84 | M & L treating the soil along with external perimeter of building at the rate of 2.25 litres of the perimeter wall complete all as specified and directed. | 60 | Running Metre | |
| 87 | 85 | S & F Tuffen galss 10mm thick for door and pation of squash court including all necessary fitting as specified and directed. | 15 | Square Metre | |
| 88 | 86 | S & F Second class hardwood in scantings for frame work complete all as specified and directed. | 0.5 | Square Metre | |
| 89 | 87 | S & F Second class hardwood plain fillets, square, rectangular or traingular in section, celan sawn, secured with nails or brads, ex 13 sqcm but n exc 25sqcm complete all as specified and directed. | 500 | Running Metre | |
| 90 | 88 | M & L 38mm thick parquetb (Wood work) flooring of first class teak wood laid over cement screed bed over sub base, complete all as specified and directed, | 60 | Square Metre | |
| 91 | 89 | M & L stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 0.18 mm with tinned tacks, or galvanized wire staples complete all as specified and directed, | 12 | Square Metre | |
| 92 | 90 | S&F in repair 15mm dia bib tap chormium plasted cast copper alloy, crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. \n | 4 | Each | |
| 93 | 91 | Supply only in repairs 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.\n | 2 | Each | |
| 94 | 92 | Supply only PVC connection 15mm dia 450mm long with PVC nut at both ends, complete all as specified and directed. | 8 | Each | |
| 95 | 93 | Supply and fixing in repair 15mm dia bore chromium plated concealed stop cock, complete all as specified and directed. | 4 | Each | |
| 96 | 94 | S & F in repair brass chromium plated angle cock 15mm dia crewed for iron pipe or brass ferrule, complete all as directed. \nMake :- Cat Part No ECV-0507 of Marc. | 2 | Each | |
| 97 | 95 | S&F in repairs towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minium weight 170 gms)complete all as specified and directed. | 2 | Each | |
| 98 | 96 | M&L 20 mm thick granite slab (ant type) in one peice machine cut, bedded screed bed 15mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including citting and polishing including rounding/bull nozing the edges complete all as specified and directed. | 6 | Square Metre | |
| 99 | 97 | M&L 20 mm thick granite slab (ant type) in one peice machine cut as in skirting/dado, bedded screed bed 10mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including citting and polishing including rounding/bull nozing the edges complete all as specified and directed. | 2 | Square Metre | |
| 100 | 98 | E/M ITEMS\nM & L for point wiring complete with 1.5 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :- | |||
| 101 | 98.1 | One light point controlled by one, one way switch | 22 | Per\nPoint | |
| 102 | 98.2 | One fan point controlled by one switch and regulator. | 6 | Per\nPoint | |
| 103 | 98.3 | One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board. | 8 | Per\nPoint | |
| 104 | 98.4 | One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board. | 12 | Per\nPoint | |
| 105 | 99 | M & L for point wiring complete for 15 Amps switch socket combination on independent board with with 2.50 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 2.50 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor cable to common earth & connecting to earth dolly. | 8 | Per\nPoint | |
| 106 | 100 | S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed. | 48 | Each | |
| 107 | 101 | S & F switch piano flush type 15 Amps single pole one way 230 volts complete all as specified and directed. | 8 | Each | |
| 108 | 102 | S & F, socket outlet 3 pin(with 2 pin outlet also), 5/6 Amp flush type, 240 volts all as specified & directed.\n | 20 | Each | |
| 109 | 103 | S&F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type , 240 Volt complete all as specified & directed. | 8 | Each | |
| 110 | 104 | S & F ceiling rose surface bakelite 65x50mm with two or three terminal complete all as specified and directed. | 28 | Each | |
| 111 | 105 | S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up with the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. \nMake :- Havelles Cat Part No LHEXBHP71N1W018 or equivalent as specified in Appendix 'D'. | 12 | Each | |
| 112 | 106 | S&F LED 16 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 2 in 1 3K, 4K, 6K with and including LED prewired and connecting up dismantling of old unsv recessed mounted light, complete all as specified and directed. \nMake :- Havelles Cat Part No LHEBLPPNUZ1W018 or equivalent as specified in Appendix 'D'. | 6 | Each | |
| 113 | 107 | Supply & Fixing of stepped type electronic fan regulator flush type and connecting up , ISI marked , 240 Volts complete all as specified and directed. | 4 | Each | |
| 114 | 108 | S & F ceiling Fan complete of 1200mm sweep 240 V AC including provision of hooke in ceiling of suitable size including necessary electric connections, complete all as specified and directed. | 4 | Each | |
| 115 | 109 | S & F exhaust fan complete of 300mm sweep 240 V AC includi8ng provision of hole in wall of stuiable size for fixing of exhaust fan, complete all as specified and directed. | 2 | Each | |
| 116 | 110 | S & F sheet metal enclosure double door type suitable for fixing MCCB 125 Amps TPN with 200 amps rated bus bar vertical DB 4 ways TPN including incoming MCCB 125 Amps 415 Volts completed all as specified and directed. | 1 | Each | |
| 117 | 111 | Supply and fixing LED type street DRACO Series Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton Greaves Ltd/Shakti Fixtures Pvt Ltd/Surya Roshni Limited/Syska LED Lights Pvt Ltd (SYSKA), light luminaire 20 Watt 230 V, 50 Hz and including all necessary fitting accessories and LED complete all as specified and directed. | 4 | Each | |
| 118 | 112 | M &L for 40mm bore GI Pipe (Light grade) for protection of LT cable fixed to walls/ poles/ road crossing including clamps complete all as specified and directed. | 10 | Running Metre | |
| 119 | 113 | S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed. | 12 | Each | |
| 120 | 114 | S&F MCB 63 Amps, 240 Volts, single pole & neutral complete all as specified and directed. | 1 | Each | |
| 121 | 115 | Supply/Laying / fixing, jointing, testing and commissioning in replacement of 3.5 core 35Sqmm LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed.\nNOTE :- (a) Excavation & earth work, shall be measured and paid for seprately under respective items catered in B/R part of the BOQ\n(b) GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the BOQ \n(c) Road cutting involved during excavation for laying of cables etc shall be made good as per existing road. Nothing extra shall be admissible on this account. Quoted rates of the item shall be inclusive of the above provisions. | 100 | Running Metre | |
| 122 | 116 | S & F second class hardwood rectangular block open recessed of size 45cm x 30cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed. | 1 | Each | |
| 123 | 117 | M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M deep below normal ground level and connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connection to main switch board / Test point /panel /equipment all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, returning, filling in and removal of surplus soil to a distance n exc 50 M, Charcoal and Salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm dia for watering and 15 mm dia 3 M long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1 40mm thick precast RCC pit cover1:2:4 type B1 shall be provided on CI frame etc complete, all as specified & directed. | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
