Military Engineer Services-MES has published Repair/Replacement Of Old/Unsv Water Level Indicator , Lt Panel And Other Connected Works , Gate Light , Internal Wiring , Light Fittings , Security Lights And Other Related Works At Various Water Supply Installation And Ac Plant Under Ge E/M Luck. Submission Date for this Tender is 01-07-2020. Electrification Work Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-07-2020 |
| Name of Work : REPAIR/REPLACEMENT OF OLD/ UNSV WATER LEVEL INDICATOR, L.T. PANEL AND OTHER CONNECTED WORKS AT WATER SUPPLY INSTALLATION & A.C. PLANT, GATE LIGHT INTERNAL WIRING,LIGHT FITTINGS, SECURITY LIGHTS AND OTHER RELATED WORKS AT VARIOUS W/S INSTALLATION AND A.C. PLANT UNDER GE (E/M), LUCKNOW | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply, installation, testing and commissioning indoor type LT cubical panel as in replacment of size not less than 1.5 x 1.2 x 0.40 Metre shall be factory fabricated as per IS-8623 powder coated with structureal siemens grey RAL 7032 paint front and back openable and lockable by key from both side having louvers and air vent gasket and totally vermin proof board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet duly compartmentalized for incoming and outgoing laminated copper busbar duly insulated with colour coded heat shrinkable sleeves and mounted on DMC/epoxy insulators size not less than 50x50x conical type at a maximum interval of 500mm ). The incomer and outgoing shall have extension link two times the rating of individual feeder. The length of extension should not be less than 200mm long copper strip. All links shall be insulated with colour coded heat shrinkable sleeves having provision for termination of incomers and outgoing cables. All control wires shall be not less than 2.5 Sq mm multi stranded copper conductor and properly bunched/tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a support of angle size 50x50x5mm, & 1.8 Metre long -04 Nos duly grouted 30 cm below the GL in PCC including a detachabale pre-drilled gland plate of thickness 2.0 mm cold zinc metal coated shall be provided with at the bottom for entry of armoured cable with adequate size of gland. Manufacturers name plate and danger plate shall be provided at suitable visible place with suitable housing of Digital meter for current, voltage, frequency and power factor having proper selector switch size 96x96mm accuracy class (auxilary support of 230V AC with SP MCB protected shall be provided including the followings (all electrical copnnections will be carried out through appropriate size laminated copper extension of busbar etc as per latest Engineering practice:- \nNote:-Design /Drawing of L.T. Panel shall be approved by Garrison Engineer. | 4 | Each Job | |
| 2 | 1.1 | Contd item No. 1\nINCOMING\na) Changeover switch on load in open execution 4 pole 415 V, 50 cycles-160 Amp -02 Nos( One for commercial & DG Set Supply & other for phase changing Make : L&T Cat Part No. CO21600 0000 or equivalent model in Legrand/Schnieder\nb) Busbar 4 pole (three phase and one for neutral) made out of laminated copper size 40mmx6mm\nc) MCCB Cap 160 Amp, 4 pole, 415V, 50 c/s 36 KA-01 No Make :L&T Cat Part No. CM92152 0000X1 or equivalent model in Legrand/Schnieder\nOUTGOING\na) MCCB Cap 100 Amp, 4 pole, 415V, 50 c/s 36 KA-01 NoMake : L&T Cat Part No. CM92153 0000X1 or equivalent in Legrand/Schnieder\nb)MCB TPN capacity 32 Amps, 415V, 50 c/s 16 KA-01 No. Make : Legrand / Schnieder / L&T\nc) MCB SPN capacity 32 amp, 'C' series-02 Nos Make : Legrand / Schnieder / L&T\nd) Star/delta soft starter suitable upto 36KW /50HP 3 phase, 415V, 50 c/s induction motor including protection against over voltage, under voltage, over current under current reverse phasing, single phasing, earth fault with required PLC . Make : L&T Cat Part No. SS94021 or equivalent model in BCH/Havells\ne) DOL starter suitable for 3 phase 50 Hz 400V, not less than 5 HP induction motor.-01 No Make : L&T Cat Part No. SS96210 POVO or equivalen model in BCH/Havells\n | |||
| 3 | 1.2 | Contd item No. 1\nMETERING & MISC\na) Volt meter (0-500V) digital type with selector switch-01 No. Make : Secure or equivalent approved make.\nb) Ammeter (0-200 amps) digital type with CTs and selector switch-01 No Make : Secure or equivalent approved make.\nc)Ammeter (0-50 amps) digital type with CT's and selector switch-01 No Make : Secure or equivalent approved make.\nd) Ammeter (0-30 amps) digital type with CT's and selector switch-01 No Make : Secure or equivalent approved make.\ne) Set of indicating lamp LED type-01 Set.\nf) Civil work PCC 1:2:4 for grouting of panel complete including excavation, earth work.\ng) Disconnecting of existing LT UG cable from old panel and connecting in new panel including connected work such as excavation of cable loop, relaying/refixing of cable in trench/floor as per site requirement, earth work & repair damaged trench/floor to match the existing surface all as directed by Engineer-in-Charge \nh) Digital Multi function meter for Ammeter, Volt, KWH, PF, frequency etc 3 phase 4 wire of suitable capacity.-01 No Make : Secure or equivalent approved make.\n | |||
| 4 | 2 | Earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 40mm bore (light grade) all as specified, directed and shown in electrical plate No 5 of SSR Part-I and testing ,including replacment of old unserviceable earthing, complete all as specified and as directed by Engineer-in-Charge. \nNote : \n(i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point.\n(ii) Earth pit shall be constructed minimum 1.00 metre away from earth.\n\n | 28 | Each | |
| 5 | 3 | Repair/maint of L.T.Panel 3 phase AC 415V, 50 Hz A of any make including Taking out old /UNSV MCCBs & MCBs /incoming and outgoing laminated copper busbar , DMC/epoxy insulators of any size ,Volt meter, Amp. meter,phase indicator LED lamp,Change over switch of any capacity ,burnt out copper winding ,current coil ,potential coil and keeping aside for safe custody for re-use, opening the L.T. Panel, removing gasket, dismantling and taking out old parts carefully, disconnecting all conections, & re-assembling all serviceable parts to original position including cleaning , removing sludge, dirt, dust, cleaning of parts including removal of old paint with 02 coat synthetic enamel paint after 01 coat iron red oxide paint along with replacement of nuts, bolts, thimbles, gasket etc as per site requirement including complete testing as per site requirement. , complete all as specified and directed by Engineer-in- Charge.\nNote : All spare parts and rewiring work will be measured and paid seperately under respective item of Sch 'A' as supply only and cost of fixing is deemed to be included in rates quoted against Sl No 3. \n | 20 | Each Job | |
| 6 | 3.01 | Supply only MCCB 100 Amps , TP , 415 Volts, 16 KA, 50 Hz including spreader terminals , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 7 | 3.02 | Supply only MCCB 125 Amps , TP , 415 Volts, 16 KA, 50 Hz including spreader terminals , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 8 | 3.03 | Supply only MCCB 160 Amps , FP , 415 Volts, 36 KA, 50 Hz including spreader terminals , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 9 | 3.04 | Supply only MCCB 160 Amps, 415 volts AC 50Hz, 3 pole, bracking capacity 36 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 10 | 3.05 | Supply only MCCB 200 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 11 | 3.06 | Supply only MCCB 250 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 KA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 12 | 3.07 | Supply only Changeover switch on load in open execution 4 pole 415 V, 50 cycles-100 Amp -02 Nos( One for commercial & DG Set Supply & other for phase changing , complete all as specified and directed by Engineer-in- Charge.\n | 20 | Each | |
| 13 | 3.08 | Supply only MCB TPN capacity 32 Amps, 415V, 50 c/s 16 KA, complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 14 | 3.09 | Supply only MCB SPN capacity 32 amp, 'C' series , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 15 | 3.1 | Supply only Volt meter (0-500V) digital type with selector switch , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 16 | 3.11 | Supply only Ammeter (0-50 amps) digital type with CT's and selector switch , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 17 | 3.12 | Supply only Ammeter (0-30 amps) digital type with CT's and selector switch , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 18 | 3.13 | Supply only Set of indicating lamp LED type, complete all as specified and directed by Engineer-in- Charge. | 60 | Each | |
| 19 | 3.14 | Plain Cement Concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in any thickness of size and shape as directed for grouting of panel (including caps and bases etc) , complete all as specified and directed by Engineer-in-Charge.\nNote :Excavation and earth work shall be measured and paid separetly under respective items of this schedule. | 1.25 | Each Job | |
| 20 | 3.15 | Supply only Busbar 4 pole (three phase and one for neutral) made out of laminated as per existing aluminium size 40mmx6mm , complete all as specified and directed by Engineer-in- Charge. | 20 | Each Job | |
| 21 | 3.16 | Supply only Current coil as per existing , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 22 | 3.17 | Supply only Potential Coil as per Existing , complete all as specified and directed by Engineer-in- Charge. | 20 | Each | |
| 23 | 3.18 | Supply only Set of Copper wiring as per existing size , complete all as specified and directed by Engineer-in- Charge. | 20 | Each set | |
| 24 | 4 | Gate light LED-40 WATT 215 V, 50 HZ, post top made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection fix with GI Pipe 40 mm dia 30 cm long (15 cm under the pillar & 15 cm above the pillar ) with proper connecting with existing electric cable in and ilcuding taking out old unservicable light , complete all as specified and directed by Engineer-in- Charge. | 40 | Each | |
| 25 | 5 | Point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall surface as existing same colour including taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge. \n | 150 | Per Point | |
| 26 | 6 | All as per Sl item no.5 above but for one socket outlet point 5 amps on independent board controlled by one, one way switch. | 30 | Per point | |
| 27 | 7 | All as per Sl item no.5 but for one socket outlet point on same the baord with other switches. | 30 | Per point | |
| 28 | 8 | Point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly including taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge. \n | 30 | Per Point | |
| 29 | 9 | Switch piano flush type of sigle pole ,5/6 Amps, one way ,complete all as specified and as directed by Engineer-in- Charge. \n | 210 | Each | |
| 30 | 10 | Switch piano flush type of single pole, 15 Amps, one way ,complete all as specified and as directed by Engineer-in- Charge. \n | 30 | Each | |
| 31 | 11 | Socket out let 2 in 1 socket 3 pin 5 Amps, flush type controlled by one switch , complete all as specified and directed by Engineer-in- Charge.. | 60 | Each | |
| 32 | 12 | Socket out let 2 in 1, 3 pin, 5 and 15 Amps flush type , complete all as specified and as directed by Engineer-in- Charge. | 30 | Each | |
| 33 | 13 | Ceiling rose, Pilot 3 Plate ceiling rose 6A ,complete all as specified and as directed by Engineer-in- Charge. | 120 | Each | |
| 34 | 14 | Ceiling fan step type regulator electronic type deluxe 240 Volts 5 step ISI Marked ,complete all as specified and as directed by Engineer-in- Charge. | 30 | Each | |
| 35 | 15 | Distribution box epoxy powder coated ,SPN 2 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed by Engineer-in- Charge.\n | 30 | Each | |
| 36 | 16 | Distribution box epoxy powder coated ,SPN 8 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed by Engineer-in- Charge.\n | 15 | Each | |
| 37 | 17 | MCB SP, 6 to 32 Amps, 240 Volts of 'B' series to be housed in DBs of Proper and suitable size cable lugs to be fixed with MCBs as in replacment ,complete all as specified and directed by Engineer-in- Charge.\n | 30 | Each | |
| 38 | 18 | MCBs SPN/ Isolator, 40 Amps, 240 Volts of 'B' series to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs as in replacment ,complete all as specified and directed by Engineer-in- Charge.\n | 90 | Each | |
| 39 | 19 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 32 amps , complete all as specified and directed by Engineer-in- Charge. | 15 | Each | |
| 40 | 20 | Flourescent LED tube light fitting Surface mounting , 1X/36 Watt ,energy efficient,ceiling /wall mounting box type fitting complete , with decorative serrated acrylic cover diffused illumination elegantly designed , spring loaded, rotary type lamp holder, connector block etc. and all accessories with 1 No 40/36 watt tube rod including provn of two core flexible copper cable of size 1.5 Sqmm from ceiling rose/connector in and ilcuding taking out old unservicable light , complete all as specified and directed by Engineer-in- Charge. | 60 | Each | |
| 41 | 21 | LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers including jointing and testing complete and taking out unserviceable cable , complete all as specified and directed by Engineer-in- Charge. \nNote : Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.\n | 400 | RM | |
| 42 | 22 | All as per Sl No 39 above but 50 Sqmm 3.5 core. | 300 | RM | |
| 43 | 23 | All as per Sl No 39 above but 70 Sqmm 3.5 core. | 400 | RM | |
| 44 | 24 | Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge. | 100 | Cum | |
| 45 | 25 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge. | 70 | Cum | |
| 46 | 26 | Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge. | 30 | Cum | |
| 47 | 27 | Sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge.\nNote: Punned thickness (over all 18 cm) shall be measured & paid. | 23 | Cum | |
| 48 | 28 | Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge. | 3000 | Each | |
| 49 | 29 | Sub main wiring (concealed type ) with three single core 6 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. \nNote : (i) 3 run of 6 Sqmm ,1 run of PVC conduit & 1 run of 6 Sqmm cable will be measured as single run.\n(ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.\n | 250 | RM | |
| 50 | 30 | PVC insulated & sheathed , electric cable on RCC Piller /Dome of over head tank at hight of 26 meter approximatelly from normal ground level incluiding fixing arrangement with Copper conductor,multi stranded 1100 volts grade Flate 3 core 4 Sqmm cable in and including taking down old unservicable cable , complete all as specified and directed by Engineer-in-Charge. | 120 | RM | |
| 51 | 31 | Aviation Light fitting 100 Watt 230 Volts 50 Hz yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories. in and ilcuding taking out old unservicable light , complete all as specified and directed by Engineer-in- Charge. | 4 | Each Job | |
| 52 | 32 | MCB DB single pole with neutral sheet metal enclosure double door type, 240V,of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 02 way in and including taking down old unservicable MCB DB complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
| 53 | 33 | MCB single pole & neutral 20 Amp rating 'C' Series 240 Volt in and including taking down old unservicable MCB complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
| 54 | 34 | Water level indicator of OHT 21 head and 90 metre apart from the tubewell complete kit in all manners as Approved by E-in-C's Br, AHQ including taking down of old unserviceable water level indicator , complete all as specified and directed by Engineer-in- Charge. \nMake :IE Co, or equivalent of Servel/ Surya Electronics & Control . | 5 | Each Job | |
| 55 | 35 | Joint kit suitable for 0.5 Sq mm 10 pairs of copper wire cable of water level indicator , complete all as specified and directed by Engineer-in- Charge.. | 5 | Each Job | |
| 56 | 36 | Solid PVC insulated , 10 pairs, individual shielded for interference rejection, armoured PVC sheathed 1100 Volts garde 0.5 sqmm instrumental cable ISI-5608 marked, laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. including jointing and testing complete and taking out unserviceable cable , complete all as specified and directed by Engineer-in- Charge. \nNote :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items.\n\n\n | 150 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
