Military Engineer Services-MES has published Provision Of Water Heating System With Allied Infra At Shalateng Garrison Under Age ( I ) Cif ( K ). Submission Date for this Tender is 06-07-2020. Heater Tenders in SRINAGAR Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jun-2020 | DATE POSTPONED | Date | 29-06-2020 |
| 2 | 29-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-07-2020 |
| Name of Work : PROVN OF WATER HEATING SYSTEM WITH ALLIED INFRA AT SHALATENG GARRISON UNDER AGE (I) CIF (K) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | OIL FIRED HOT WATER GENERATOR:\nSupply, installation, Testing & Commissioning of oil fired Hot Water Generator having capacity 1,00,000/- Kg Cal per hrs and hard water output 1000 ltrs at 700C per hrs using Kerosene/HSD oil complete with reverse flame combustion chamber,side panels duly powder coated and equipments automatic monoblock burner assembly, fire tubes, control panel with sequence controller, photo cell for flame failure, HT transfer electrodes, blower assembly, electric panel, mounting frame, pressure gauges at inlet and outlet suitable for operation on 50 Hz,Single phase 220 Volts A C supply \nMake : Thermax,Riello,Ecoflame,Rapid Therm\n | 1 | Each | |
| 2 | 2 | HOT WATER CIRCULATION CENTRIFUGAL PUMPS:\nSupply, installation, testing & commissioning of monoblock centrifugal pump with cast iron impeller with teflon mechnical seal driven by suitable capacity electric motor for hot water of 25 Mtr head complete with accessories including cement concrete foundation and all as specified and directed of following flow rates 125LPM (One working One Stand by) | 2 | Each | |
| 3 | 3 | HYDROPNEUMATIC HOT WATER SUPPLY PUMPS:\nSupply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor for hot water supply of 28 Mtr head and flow rate of 6 LPS complete with accessories including,pressure gauge,pressure cutout switch,pressure tank, cement concrete foundation and all as specified and directed | 2 | Each | |
| 4 | 4 | Supply, installation, testing & commissioning of thermostatic circulation pump for hot water return line driven by suitable capacity electric motor of 1HP complete with accessories and all as specified and directed . | 1 | Each | |
| 5 | 5 | FLUE GAS EXHAUST PIPE:\nSupply and installation of MS flue gas exhaust pipe made out of 3 mm thick MS sheet, minimum 1.2 m above the highest point of the plant room and including connection from Hot Water generator to main vertical exhaut pipe fabricated from 3 mm MS sheet. The item shall be complete with the mounting/ fixing arrangement. The Hot Water generators shall be connected to a independent flue gas exhaust pipe of suitable size and as per manufacturers guide lines. The portion of the flue gas exhaust pipe in side the building shall be insulated with fiber glass insulation wool of 24kg/cum with aluminium cladding. Complete all as specified and directed \nNote : Rate quoted includes all mountaining and fixing arrangment. | 1 | Each Set | |
| 6 | 6 | EXPANSION TANK:\nSupply & Installation of overhead HDPE expansion tank of size 500 Liters complete covered with 13 mm thick closed cell electrometric insulation complete with removable lid, in/out /drain/ overflow system mounting arrangement and complete connection. | 1 | Each | |
| 7 | 7 | DAY OIL STORAGE TANK:\nSupply, installation, testing and commissioning of Kerosene/ HSD Day service Tank rectangular MS (IS2062) construction with capacity of 500 Litres complete with inlet, outlet, overflow, drain and vent with flame arrestor,Tank will be made out of 4 mm MS sheet with and including supporting arrangement made out of minimum 50mm NB class ‘B’ pipe to keep tank base at minimum(1000mm) above FFL, service platform as directed shall also be provided.The tank should be provided with digital level indicator .Tank and structure will be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 1 | Each | |
| 8 | 8 | COLD WATER STORAGE TANK:\nSupply & Installation of overhead HDPE cold water tank of size 2000 Liters complete covered with 13 mm thick closed cell electrometric insulation complete with removable lid, in/out /drain/ overflow system to be placed on suitable mounting arrangement and complete connection complete all as specified and directed.\nNote : Mounting arrangment to be provided shall be measurment and paid separetlly | 1 | Each | |
| 9 | 9 | INSULATED HOT WATER STEEL STORAGE TANK:\nSupply, installation, testing and commissioning of clindercal insulated MS/Carbon steel hot water tank capacity of 1000 Liters made out of 5mm thick MS/Carbon steel sheet with glass lining on inner surface of tank with inbuilt heat exchanger capacity of 64000 kcal/hr and temperature guage, 6 KW Heater back-up with automatic electrical control complete with inlet, outlet, return connections,safety valve, M.S Padestal, duly insulate with 50mm thick PUFF insulation with protection covering complete as specified. (Make:Baymak,Ecoflame,Suntec) | 1 | Each | |
| 10 | 10 | HOT GLYCOL FLUID PIPING:\nSupplying and laying, connecting, fixing and testing of poly propylene random copolymer pipes with fibre glass layer inside of pipes complete with fittings, duly insulated with 13 mm thick closed cell elastomeric insulation 30 to 40 Kg/m3density for the following sizes of Hot Glycol fluid pipes\nMakes:RAK Therm,PILSA,Dizayn,Superm | |||
| 11 | 10.01 | 50 mm dia Outer Dia pipe with 13 mm thick nitrile insulation | 20 | RM | |
| 12 | 10.02 | 40 mm dia Outer Dia pipe with 13 mm thick nitrile insulation | 30 | RM | |
| 13 | 10.03 | 25 mm dia Outer Dia pipe with 13 mm thick nitrile insulation | 20 | RM | |
| 14 | 10.04 | Butter fly valves 40 mm | 6 | Each | |
| 15 | 10.05 | Y strainer 40 mm dia | 2 | Each | |
| 16 | 10.06 | Non Return Valves 40 mm dia | 2 | Each | |
| 17 | 10.07 | Y strainer 25 mm dia | 2 | Each | |
| 18 | 10.08 | High pressure SS Ball valves 32 mm dia | 2 | Each | |
| 19 | 10.09 | High pressure SS Ball valves 25 mm dia | 2 | Each | |
| 20 | 10.1 | High pressure SS Ball valves 20 mm dia | 1 | Each | |
| 21 | 10.11 | Pressure gauges with cocks and syphon | 2 | Each | |
| 22 | 10.12 | Water flow switches | 1 | Each | |
| 23 | 10.13 | Automatic air purgers valves | 2 | Each | |
| 24 | 10.14 | Supplying and fixing of ball bib cock having 20mm internal dia | 20 | Each | |
| 25 | 11 | HOT WATER PIPING\nSupplying and laying, connecting, fixing and testing of poly propylene random copolymer pipes complete with fittings, duly insulated with 19 mm thick closed cell elastomeric insulation 30 to 40 Kg/m3density for the following sizes of Hot water pipes | |||
| 26 | 11.01 | 50 mm dia Outer Dia pipe with 19 mm thick nitrile insulation | 12 | RM | |
| 27 | 11.02 | 40 mm dia Outer Dia pipe with 19 mm thick nitrile insulation | 12 | RM | |
| 28 | 11.03 | 32 mm dia Outer Dia pipe with 19 mm thick nitrile insulation | 40 | RM | |
| 29 | 11.04 | 25 mm dia Outer Dia pipe with 19 mm thick nitrile insulation | 100 | RM | |
| 30 | 11.05 | PPR Ball valves 40 mm | 2 | Each | |
| 31 | 11.06 | PPR Ball valves 32 mm | 2 | Each | |
| 32 | 12 | METAL CLADING\nProviding and fixing of Aluminum cladding of 24 SWG on insulated pipes of following sizes | |||
| 33 | 12.01 | 50 mm dia pipe | 20 | RM | |
| 34 | 12.02 | 40 mm dia pipe | 30 | RM | |
| 35 | 12.03 | 32 mm dia pipe | 20 | RM | |
| 36 | 13 | Supply, installation, testing and commissioning of cubical outdoor feeder LT panel board CPRI Approved with powder coated finishing platform mounted factory made totally enclosed dust and vermin proof (Protected class IP-54) double shutter front and back opening with locking arrangement complete made up 3.15mm thick CRCA sheet working on 415 Volt AC supply including bus bar for the phases and neutral insulated on hyproscopic insulator fixed. The base frame shall be made by MS angle of size 50mmx50mmx5mm and fixed on PCC foundation by means of 4 Nos MS bolt 16mm dia ,100mm long with nuts and washer and necessary internal connection with PVC sheathed copper cable entry system for incoming and out going terminal feeder cable gland, screw bolts, nuts etc complete all as specified and directed by Engineer-in-Charge consisting the following accessories:-\nIncomer\n(a) 100A MCCB 25 KA\n(b) Phase indicating lights& control fuses -1 Set\n(c) Voltmeter (0-500V) range with selector switch - 1 Set\n(d) Amp meter (0-100A) range with C.T.S. of 100/5 ratio\n(e) Selector switch-01 No\nOutgoing\n20A, SPN MCB for circulation pumps with automatic starter with indicating lamps 0-60 A Ammeter with CT-2 Nos\n16 A SPN MCB for boiler- 1 Nos\n20 A SPN MCB with stator for Hot water supply pumps - 2 Nos\n10 A SPN MCB with for hot water circulation pumps-2 Nos\n40 A SPN MCCB for Hot water tank panel -1 Nos \n(Note: The MCB's shall be ''C'' curve type with Breaking capacity 10KA).\nCABLES | 1 | Each | |
| 37 | 14 | AUTOMATIC VOLTAGE STABLIZER:\nSupplying of automatic boost/buck voltage stabilizer for low and high voltage correction equipped with electronic transistorized relay suitable for correction on single phase 50 cycles AC supply complete with voltmeter and designed for input voltage 90 volts to 250 volts and output voltage stablizer between 215 to 240 V of capacity 5KVA complete,all as specified and as directed.\nMake:Blue Line/Servo Control/Electricfied Company. | 1 | Each | |
| 38 | 15 | M&L Sub main wiring with four single core PVC insulated unsheathed copper conductor cable of size 6 sqmm of 2run Multistrainded 1100 volt grade drawn through and including PVC conduit of 25 mm dia med grade (recess in wall or over wall/ceiling all as per site requirement) and including PVC insulated 4 sqmm copper conductor cable as earth wire to common earth dolly complete, all as specified. | 78 | RM | |
| 39 | 16 | Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed.\nNotes: \n(i) Main earthing strip from earth plate electrode to test point upto length of 7.5 metres length shall deem to be included in the unit rate quoted against this item.\n(ii) GI protection pipe & earthing lead beyond 7.5 metres shall be measured and paid for seperately under appropriate item of Sch A part-I.\n (iii) On testing after completion if desired resistanace is not obtained, the contrator shall redo the earthing without any extra cost to the department. | 2 | Each | |
| 40 | 17 | M&L for fabricating to cross arms FI clamps support D clamps strips and back plates fabrication from structural steel section incl nut bolts washer MS frame /supporting structure to plant by fabricating Rolled mild steel in roof trusses (framed) joist, channel angle or tee sections fixed independently, without connecting plates, etc conforming to grade 410-o or Fe-310-o complete including necessary painting as directed. | 1 | Qtl | |
| 41 | 18 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge. | 0.5 | Cum | |
| 42 | 19 | Plain cement concrete (1: 3 : 6) type C-2 (using 40mm graded crushed stone aggregates) as in foundation for sub base of plateform/ pole etc complete all specified and directed by Engr-in-Charge. | 1 | Cum | |
| 43 | 20 | Brick work with sub class "B" bricks straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:6 complete, all as specified and directed by Engineer-in-Charge. | 2.5 | Cum | |
| 44 | 21 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work ,concrete surfaces etc finished even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge. | 10 | Sqm | |
| 45 | 22 | Welded steel wire fabric weight not exceeding 4kg/SQM to steel members complete all as specified and directed by Engr-in-Charge | 8.4 | Sqm | |
| 46 | 23 | Mild steel work as in hand rails, half round or other steel section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc,flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-Charge. | 160 | Kg | |
| 47 | 24 | S&F of 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with zinc coating 120 grams/sqm complete all as specified and directed by Engr-in-Charge. | 9 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
