National Institute Of Technology-NIT has published Installation Of Machine Bed Foundation And Aluminum Partition For Equipment At Central Workshop . . Submission Date for this Tender is 22-06-2020. Foundation Work Tenders in National Institute of Technology Tiruchirappalli Tamil Nadu. Bidders can get complete Tender details and download the document.
| Name of Work: Installation of machine bed foundation and Aluminum partition for equipment at Central Workshop. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | |||
| 2 | 1.1 | All kinds of soil. | 7 | Cum | |
| 3 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 4 | 2.1 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 2 | Cum | |
| 5 | 3 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : | |||
| 6 | 3.1 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 8 | Cum | |
| 7 | 4 | Centering and shuttering including strutting, propping etc. and removal of form for: | |||
| 8 | 4.1 | Foundations, footings, bases of columns, etc. for mass concrete | 16 | sqm | |
| 9 | 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. | |||
| 10 | 5.1 | Cold twisted bars | 70 | Kg | |
| 11 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | |||
| 12 | 6.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 1 | Cum | |
| 13 | 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 1 | Each | |
| 14 | 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
| 15 | 8.1 | 200x10 mm | 1 | Each | |
| 16 | 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
| 17 | 9.1 | 125 mm | 4 | Each | |
| 18 | 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | |||
| 19 | 10.1 | Single rubber stopper | 1 | Each | |
| 20 | 11 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 30 | Kg | |
| 21 | 12 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. | |||
| 22 | 12.1 | 40 mm thick with 20 mm nominal size stone aggregate | 5 | Sqm | |
| 23 | 13 | 12 mm cement plaster of mix : | |||
| 24 | 13.1 | 1:6 (1 cement: 6 fine sand) | 20 | Sqm | |
| 25 | 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | |||
| 26 | 14.1 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | 2 | Cum | |
| 27 | 15 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | |||
| 28 | 15.1 | Semi rigid pipe\n40 mm dia | 1 | Each | |
| 29 | 16 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. | |||
| 30 | 16.1 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | 1 | Each | |
| 31 | 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL | |||
| 32 | 17.1 | 25 mm nominal outer dia Pipes | 20 | Metre | |
| 33 | 18 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : | |||
| 34 | 18.1 | 25 to 40 mm nominal bore | 1 | Each | |
| 35 | 19 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | |||
| 36 | 19.1 | 25 mm nominal bore | 1 | Each | |
| 37 | 20 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : | |||
| 38 | 20.1 | 25 mm nominal bore | 1 | Each | |
| 39 | 21 | Providing and fixing PTMT stop cock of approved quality and colour. | |||
| 40 | 21.1 | 20 mm nominal bore, 89 mm long, weighing not less than 88 gms | 1 | Each | |
| 41 | 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
| 42 | 22.1 | For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron) | 300 | Kg | |
| 43 | 22.2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPowder coated aluminium (minimum thickness of powder coating 50 micron) | 10 | Kg | |
| 44 | 23 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. | |||
| 45 | 23.1 | Pre-laminated particle board with decorative lamination on both sides | 65 | Sqm | |
| 46 | 24 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
| 47 | 24.1 | With float glass panes of 5.50 mm thickness | 15 | Sqm | |
| 48 | 25 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 1 | Each | |
| 49 | 26 | Providing and fixing of 75mm dia (Finolex or Avonplast-6kg/cm2) unplasticised Rigid PVC soil pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes | 10 | Metre | |
| 50 | 27 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC Door elbow (Finolex or equivalent make) | 2 | Each | |
| 51 | 28 | Making the opening on Randaon rubble masonry wall by core cutter for laying pipe line etc as per the direction of Engineer-in-charge. | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
