}

Proposed Construction Of Wellness Centre At Sub Centre-Jyona, District-Raebareli, LUCKNOW-Uttar Pradesh

Uttar Pradesh Rajya Nirman Sahkari Sangh Limited has published Proposed Construction Of Wellness Centre At Sub Centre-Jyona, District-Raebareli. Submission Date for this Tender is 05-06-2020. Building Work Tenders in LUCKNOW Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

24452563
Proposed Construction Of Wellness Centre At Sub Centre-Jyona, District-Raebareli
Open Tender
Indian
Uttar Pradesh
LUCKNOW
05-06-2020

Tender Details

PROPOSED CONSTRUCTION OF WELLNESS CENTRE AT SUB CENTRE-JYONA, DISTRICT-RAEBARELI

Key Value

Document Fees
INR 519 /-
EMD
INR 7630.0 /-
Tender Value
INR 3.81 Lakhs /-

BOQ Items

Name of Work: PROPOSED CONSTRUCTION OF WELLNESS CENTRE AT SUB CENTRE-JYONA, DISTRICT-RAEBARELI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation in trenches for foundation pipes, cable etc in ordinary sol (Loam clay or sand) inlcuding lift upto 1.5 Mt. lead upto 30mt. and dressing of sides and rammings of bottom and disposal of surplus excavated earth as directed by the engineer. 12.85 CUM
2 2 Carted earth filling 0.85 CUM
3 3 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. 3.13 CUM
4 4 Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. 5.41 CUM
5 5 Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution) 25.81 SQM
6 6 R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. 1.26 CUM
7 7 As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete). 3.52 QTL
8 8 M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation wall including supply of all materials, labour and T & P etc required for proper completion of the work. 7.62 CUM
9 9 Same as in item No. 8 above but in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand) 12.02 CUM
10 10 Same as in item no. 11 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 1.59 CUM
11 11 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. TMT Fe 500 3.48 QTL
12 12 15mm thick plaster in 1cement : 4 coarse sand in plinth. 6.91 SQM
13 13 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 Coarse sand 2.25 F.M. 149.91 SQM
14 14 Making grooves 10 to 12 mm widex 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. 25.2 RM
15 15 40mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. 20.52 SQM
16 16 20 mm thick cement plaster in dado/ skirting in 1:2 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work. 3.75 SQM
17 17 Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 2.43 SQM
18 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 17.77 SQM
19 19 25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. 13.88 SQM
20 20 Supply & fixing of flush doors commercial quality conforming to IS : 2202 (Part I) 1983 including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fiting with necessary screws to be supplied departmentally.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 3.79 SQM
21 21 M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.(A)Providing & fixing of hold fasts.(B)Providing & fixing of door/windows grill.(C)Z-Section steel windows (openable).(D)Angle iron door chaukhats 40*40*5 157.23 KG
22 22 Fixing of Door, windows/ventilators chaukhats in position. Door chaukhats 2 NOS
23 23 Fixing of Door, windows/ventilators chaukhats in position. Window chaukhats 1 NOS
24 24 Fixing of Door, windows/ventilators chaukhats in position. Ventilator chaukhats 1 NOS
25 25 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) 83.72 SQM
26 26 Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem , guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. 89.25 SQM
27 27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 89.25 SQM
28 28 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 2 NOS
29 29 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete. 250X16 MM 2 NOS
30 30 Providing and fixing ISI marked oxidised M.S. tower bolts black finish (barrel type) with necessery screws etc. complete. 250x10 MM 2 NOS
31 31 Providing and fixing ISI marked oxidised M.S. handle conforming to IS 4992 with necessery screws etc. complete. 125 MM 4 NOS
32 32 Providing & laying "brick Coba" 120mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work. 22.95 SQM
33 33 Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 15.77 SQM
34 34 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 3.78 SQM
35 35 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware /Hindware /Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid 1 NOS
36 36 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 2 NOS
37 37 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia 2 NOS
38 38 Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore 2 NOS
39 39 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore 2 NOS
40 40 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore 3 NOS
41 41 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15mm nominal bore 1 NOS
42 42 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.110mm 10 MTR
43 43 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree110 mm Bend 1 NOS
44 44 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.Shoe (Plain)110 mm Shoe 1 NOS
45 45 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm 2 NOS
46 46 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. 1 NOS
47 47 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).15mm dia nominal bore 10 MTR
48 48 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).20mm dia nominal bore 5 MTR
49 49 Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.15mm dia nominal bore 10 RM
50 50 Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.20mm dia nominal bore 5 RM
51 51 Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).15mm dia nominal bore 2 NOS
52 52 Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).20mm dia nominal bore 2 NOS
53 53 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.All kinds of soil,Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 5 MTR
54 54 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.100mm diameter 5 MTR
55 55 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design.100mm dia SW pipe 5 MTR
56 56 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design,150 x 100 mm size P type With Sewer bricks conforming to IS : 4885 2 NOS
57 57 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design 1 NOS
58 58 Providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 2 NOS
59 59 Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.PARRYWARE C9948 1 NOS
60 60 Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 3 NOS
61 61 Same as item No.(60) but for 5 amp plug point with piano type switch and socket etc. 2 NOS
62 62 Same as item No.(60) but for light duty exhaust fan. 1 NOS
63 63 Same as item No.(60) but for fan and wall fan. 1 NOS
64 64 Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 15 RM
65 65 S/fixing of Hexagonal fan box 16 SWG, including phenolic fan sheet. 1 NOS
66 66 Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.(CAT: AA) 3 NOS
67 67 Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 1 NOS
68 68 Erection and testing of exhaust fan on the existing hole with suitable size 1 NOS
69 69 Supply and erection of AC 1200mm Sweep, 220/240 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required. BEE 5 star reted -1200 mm sweep. 1 NOS
70 70 Supply and fixing of 300 mm sweep 900 RPM exhaust fan heavy duty with the help of MS fasteners, including making connections, making of hole in wall fixing of MS drum & MS louvers of required size 1 NOS
71 71 Cost of monographical painting with s/o all material,labour, t&p etc. required for proper completionn of the work. 1 JOB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail