Rajya Krishi Utpadan Mandi Parishad has published Maintenance And Repair Of 500 Mt 2 Nos . Godown At Nmy Dibai . . Submission Date for this Tender is 15-06-2020. Godown Tenders in Dibai. Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work : Maintenance and Repair of 500 MT 2 Nos Godown at NMY Dibai. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantiling brick work or stone work in lime or cement mortor and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet) | BI01010001010000000000000515BI0100001115 | 42.92 | cum |
2 | 2 | Dismantling of existing plaster including disposal of refuse as directed by the Engineer-in-Charge within a distance of 60 meter (200 feet.) si no 706 | 2376.89 | sqm | |
3 | 3 | M-150 brick work in 1:4 cement & c,sand of 2.2 F.M mortar 1½ brick thick wall in superstructure including necessary cutting & moulding of brick as required thickness of wall including supply of all labour materials t&p etc requried for proper completion of the work. S.i no 305a+309 | 42.92 | cum | |
4 | 4 | M-150 brick work 1:4 cement & c.sand of 2.2 F.M mortar in foundation in plinth including supply of all marerials labour and t&P etc required for prper completion of the work. Si no 305a | 1.18 | sqm | |
5 | 5 | M.S. iron work for Z section window such as holding down bolts. Hold fast tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.si no 502 | 6.72 | qtl | |
6 | 6 | M S grill & stair case railing and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work as per SI No. 502(A) | 2.75 | qtl | |
7 | 7 | Supply and fixing rolling shutter of approved make made 80x125 mm (3"x5") cold rolled M.S lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. s.i no 520 | 17.28 | sqm | |
8 | 8 | Providing and fixing 27.5 cm long wire spring grade 2 for rolling shutters. S.i no 521 | 31 | each | |
9 | 9 | Providing and fixing top cover for rolling shutters 2.50 meter wide. s.i no 522 | 8 | each | |
10 | 10 | Providing and fixing of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer incharge) 0.50 mm + (0.05%) thcikness total coated zinc coating 120 gm. Per sqm. As per IS : 277, in 240 mps steel grade, 5-7 icrons epoxy primer on both sides of sheet and polyster top coat 15-18microns sheet should have protctive guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr. as desred by E/I. The sheet shall be fixed using self drilling/ self tapping scress of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfae, excluding the cost of purlins, rafters and truses and including cutting to size and shape wherever required (DSR 12.50). | 955.26 | RM | |
11 | 11 | Providing and fixing of precoated galvanised steel sheet proofing accessories 0.50 mm (+0.05%) thcikness total coated zinc coated 120 gm. Per sqm. As per IS:277 in 240 mpa steel grade, 5-7 micron expoisy primer on both side of the sheet and polyster top coat 15-18 micron using self drilling/self tapping screws complete Ridges plain (500+600)mm (DSR 12.51.1) | 81.2 | RM | |
12 | 12 | 12 MM thick plaster with cement and C. sand or 2.2 fineness modulus in 1:4 Cement and C. sand minimum thickness not to be less than 1 cm. including supply of all material, labour, T&P etc. required for proper completion of the work Si no 584 new item | 2354.8 | sqm | |
13 | 13 | Cement concrete with 2.0 cm gauge approved stone grit , coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour , T&P etc. S.I no 279a | 138 | cum | |
14 | 14 | Making expansion/contraction joints in C.C. Roads including approved filler materials in joints. Depth of joints 10 cm./require depth as the joints of panels and giving them a uniform finish including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of E/I | 420 | RM | |
15 | 15 | White washing three coat including supply of all materials, labour, tools& plants etc required for proper completion of the work as S I no 673 | 1050.04 | sqm | |
16 | 16 | Finishing wall wih two coat weather coat of approved quality on new treated surface with this paint to given an even shade inclduing supply of all materials, labour, T&P etc, required for proper completion of the work. Si no 660 new item | 1326.85 | Sqm | |
17 | 17 | Painting and varnishing work for two coat on previously painted old wood or iron work including its sand papering, rubbing and cleaning as required for proper completion of the work. Si no 642+643 | 387.84 | Sqm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail