Defence Research And Development Organisation -DRADO has published Provision Of Underground Sump And Borewell At Dihar Det Partapur. Submission Date for this Tender is 18-06-2020. Bore Well Tenders in PARTAPUR Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 no extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) . | item1 | 250 | Cum |
| 2 | 2 | Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. ( AS per IS 1200 no extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) . | item2 | 865 | Cum |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | item3 | 250 | Cum |
| 4 | 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | item4 | 280 | Cum |
| 5 | 5 | Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - | item5 | 31 | Cum |
| 6 | 6 | Centering and shuttering including strutting, propping etc. and removalof form for Foundations, footings, bases of columns, etc. for mass concrete | item6 | 40 | Sqm |
| 7 | 7 | Centering and shuttering including strutting, propping etc. and removalof form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | item7 | 380 | Sqm |
| 8 | 8 | Centering and shuttering including strutting, propping etc. and removalof form for suspended floors, roofs, landings, balconies and access platform | item8 | 140 | Sqm |
| 9 | 9 | Reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or morefor R.C.C. work including straightening, cutting, bending, placing in position and binding all complete | item9 | 18720 | Kg. |
| 10 | 10 | Providing and laying in position Providing M-35 grade design mix concrete grade BMC/RMC. (Note : Cement content considered in M-35 is @ 350 kg/ cum) for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 350 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). | item10 | 205 | Cum |
| 11 | 11 | Add / deduct for using extra / less cement in the items of design mix over and above the specified cement content therein. | item11 | 103 | Quintal |
| 12 | 12 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size), including finishing complete. | item12 | 15 | Cum |
| 13 | 13 | Providing and applying integral crystalline slurry of hydrophilic in nature for vertical surface two coats @0.70 kg per sqm per coatfor waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. | item13 | 200 | Sqm |
| 14 | 14 | Providing and applying integral crystalline slurry of hydrophilic in nature For horizontal surface one coat @1.10 kg per sqm.tfor waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. | item14 | 380 | Sqm |
| 15 | 15 | 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand) | item15 | 140 | Sqm |
| 16 | 16 | 20mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. | item16 | 175 | Sqm |
| 17 | 17 | Steel work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | item17 | 180 | Kg |
| 18 | 18 | Providing and Placing 5hp three phase monoblock pump as per following specification complete as directed by Engineer-incharge\n(a) Speed: 2880 RPM\n(b) Type of Product: Non - Self Priming Centrifugal Monoblock Pump\n(c) Head (Mtrs): 15 Mtrs\n(d) Impeller Material: Brass\n(e) Discharge (LPM): 180 LPM\n | item18 | 1 | Each |
| 19 | 19 | Providing and fixing 50 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. | item19 | 140 | Meter |
| 20 | 20 | Providing and fixing 80 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. | item20 | 50 | Meter |
| 21 | 21 | Providing and fixing 50 mm dia nominal boreG.I. pipes complete with G.I. fittings including trenching and refilling etc. in external work | item21 | 30 | Meter |
| 22 | 22 | Providing and fixing 80 mm dia nominal boreG.I. pipes complete with G.I. fittings including trenching and refilling etc. in external work | item22 | 30 | Meter |
| 23 | 23 | Providing and fixing 80 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end): | item23 | 1 | Each |
| 24 | 24 | 80 mm nominal bore BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. | item24 | 2 | Each |
| 25 | 25 | 80 mm nominal bore NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as\nspecified. | item25 | 2 | Each |
| 26 | 26 | Boring/drilling bore well in all type of soil of 300 mm dia for casing / stainer pipe, by suitable method prescribed in IS:2800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. | item26 | 30 | Meter |
| 27 | 27 | Boring/drilling bore well in rocky strata including boulders of 300 mm dia for casing / stainer pipe, by suitable method prescribed in IS:2800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. | item27 | 60 | Meter |
| 28 | 28 | Boring/drilling bore well in rocky strata including boulders of 300 mm dia for casing / stainer pipe, by suitable method prescribed in IS:2800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level... | item28 | 60 | Meter |
| 29 | 29 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 150 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. | item29 | 50 | Meter |
| 30 | 30 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of 150 mm nominal size dia , conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. | item30 | 60 | Meter |
| 31 | 31 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. | item31 | 4 | Cum |
| 32 | 32 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | item32 | 24 | Hour |
| 33 | 33 | Providing and fixing 150 mm dia threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: | item33 | 1 | Each |
| 34 | 34 | Providing and fixing M.S. clamp of 150 mm dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. | item34 | 1 | Each |
| 35 | 35 | Supplying, Installation, Testing, commissioning and lowering of submersible pumps set as per specifications (enclosed in cage) by using PVC column pipes-working pressure 6kg/sqcm (pipes including in separate column of schedule) including binding submersible cable,1no. pressure gauge with isolation cock along with column pipes with suitable size of clamps. The submersible pump set with direct coupled motor rated for 3 phase,50 cycle 415 ± 10% volts A/c supply with the following duty.\n(a) Total head - 50 mts.\n(b) Suitable for 100 mm dia bore\n(c) Flow rate - 10000 ltr/ hr.(Minimum)-7.5 hp motor (appx.)\n\n | item35 | 1 | Each |
| 36 | 36 | Supply, Installation, testing & commissioning of Control Panel for Tube well pump with indication lamps, accessories etc. as required and complete with weather proof type box (IP 55) made out of 2mm thick CRCA sheet including painting with epoxy powder coating. The box shall be consisting of DOL starter suitable for 7.5HP motor with MPCB, Contactor, Over Load Relay, On/Off push buttons, On/Off/Trip Indications, Ammeter with resin cast CTs & Selector Switches, Voltmeter with selector switches. The box shall be suitable for terminating AYFY terminating AYFY cable of 4core 16sq.mm size. The box shall be mounted on suitable angle frame work of 450mm height on a PCC pedestal including all materials complete. | item36 | 1 | Each |
| 37 | 37 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 560 mm internal dia EHD 35 | item37 | 4 | Each |
| 38 | 38 | Supplying & laying of 4Cx10sqmm sizes 1100 volt grade XLPE insulated PVC sheathed water proff copper conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as required. | item38 | 200 | Meter |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
