Rural Development Department has published Providing Amenities , Repairs To Employees Residential Quarters At Narali Bagh , Aurangabad .. Submission Date for this Tender is 06-06-2020. Building Repair Tenders in AURANGABAD Maharashtra. Bidders can get complete Tender details and download the document.
| Name of Work : PROVIDING AMENITIES / REPAIRS TO EMPLOYEES RESIDENTIAL QUARTERS AT NARALI BAGH, AURANGABAD. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. | BI01010001010000000000000515BI0100001113 | 974.88 | Sqm. |
| 2 | 2 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete | BI01010001010000000000000515BI0100001114 | 234.54 | Sqm. |
| 3 | 3 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. | BI01010001010000000000000515BI0100001115 | 10 | Nos. |
| 4 | 4 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. | BI01010001010000000000000515BI0100001116 | 50 | Nos. |
| 5 | 5 | Excavation for foundation IN EARTH, SOIL OF ALL TYPES, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) BY MECHANICAL MEANS | BI01010001010000000000000515BI0100001117 | 11.745 | Cum. |
| 6 | 6 | Providing soling using 80 MM SIZE TRAP METAL IN 15 CM. LAYER including filling voids with Crushed sand/grit, ramming, watering etc. complete. | BI01010001010000000000000515BI0100001118 | 2.25 | Cum. |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-10 of trap/ granite/ quartzite/ gneiss metal FOR FOUNDATION AND BEDDING including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001119 | 6.188 | Cum. |
| 8 | 8 | Providing UNCOURSED RUBBLE MASONRY of trap / granite / quartzite / gneiss stones in cement mortar 1:6 IN FOUNDATION AND PLINTH of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. | BI01010001010000000000000515BI0100001120 | 7.988 | Cum. |
| 9 | 9 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. | BI01010001010000000000000515BI0100001121 | 29.7 | Sqm. |
| 10 | 10 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete | BI01010001010000000000000515BI0100001122 | 10.309 | Cum. |
| 11 | 11 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. | BI01010001010000000000000515BI0100001123 | 216 | Sqm. |
| 12 | 12 | Providing internal CEMENT PLASTER 12MM THICK in single coat IN CEMENT MORTAR 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | BI01010001010000000000000515BI0100001125 | 548.28 | Sqm. |
| 13 | 13 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. | BI01010001010000000000000515BI0100001126 | 764.28 | Sqm. |
| 14 | 14 | Providing internal CEMENT PLASTER 20MM THICK in Single coats IN CEMENT MORTAR 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. | BI01010001010000000000000515BI0100001127 | 516.24 | Sqm. |
| 15 | 15 | Providing and laying POLISHED SHAHABAD STONE FLOORING 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. | BI01010001010000000000000515BI0100001128 | 73.8 | Sqm. |
| 16 | 16 | Providing and laying matt finish CERAMIC TILES of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick FOR FLOORING in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. | BI01010001010000000000000515BI0100001129 | 28.8 | Sqm. |
| 17 | 17 | Providing and laying CERAMIC TILES of having size 30 cm. x 30 cm. and confirming to corresponding I.S. FOR DADO AND SKIRTING in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. | 145.8 | Sqm. | |
| 18 | 18 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. | 0.315 | Cum. | |
| 19 | 19 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . | 67.5 | Rgm. | |
| 20 | 20 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | 23.4 | Sqm. | |
| 21 | 21 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete | 16.065 | Sqm. | |
| 22 | 22 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box | 27 | Sqm. | |
| 23 | 23 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. | 10.8 | Sqm. | |
| 24 | 24 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. | 380.25 | Sqm. | |
| 25 | 25 | Providing and laying for 225mm dia. salt glazed S.W. Pipe including fitting such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete | 30 | Rgm. | |
| 26 | 26 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. | 100 | Rgm. | |
| 27 | 27 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. | 10 | Nos. | |
| 28 | 28 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. | 2 | Nos. | |
| 29 | 29 | Providing and laying VITRIFIED MIRROR / GLOSSY FINISH TILES decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern FOR FLOORING in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. | 131.94 | Sqm. | |
| 30 | 30 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. | 1 | Nos. | |
| 31 | 31 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters | 5000 | Litre | |
| 32 | 32 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | 100 | Rgm. | |
| 33 | 33 | Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | 100 | Rgm. | |
| 34 | 34 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. | 10 | Nos. | |
| 35 | 35 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. | 30 | Nos. | |
| 36 | 36 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. | 5 | Nos. | |
| 37 | 37 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. | 10 | Nos. | |
| 38 | 38 | Providing and fabricating STRUCTURAL STEEL WORK IN ROLLED SECTIONS like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. | 0.332 | M.T. | |
| 39 | 39 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). | 18 | Sqm. | |
| 40 | 40 | Providing and fixing MILD STEEL GRILL GATE as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge. | 1.8 | Sqm. | |
| 41 | 41 | Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. | 25 | Nos. | |
| 42 | 42 | Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. | 48 | Nos. | |
| 43 | 43 | Replacement of damaged Alluminium Handle 125 mm of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in- charge. | 20 | Nos. | |
| 44 | 44 | Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete. | 30 | Rgm. | |
| 45 | 45 | Providing and applying WASHABLE OIL-BOUND DISTEMPER of approved colour and shade to old and new surfaces IN TWO COATS including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. | 764.28 | Sqm. | |
| 46 | 46 | Providing and applying TWO COATS OF WATER PROOF CEMENT paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. | 516.24 | Sqm. | |
| 47 | 47 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. | 66.825 | Sqm. | |
| 48 | 48 | Providing and fixing BOARD DISPLAYING INFORMATION, SUCH AS 'NAME OF WORK, TENDER COST, NAME OF CONTRACTOR, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | 1 | Nos. | |
| 49 | 49 | Royalty Charges [A] For Sand (As per statement). | 41.41 | Cum. | |
| 50 | 50 | Royalty Charges [B] For Other Minerals (As per statement). | 14.31 | Cum. | |
| 51 | 51 | Carrying out test for Cement [A] Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness | 1 | Test. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
