Rajya Krishi Utpadan Mandi Parishad has published Supply And Fixing Of 6 . 0 Mm Thick Compact Polycarbonate Sheet With Repair And Maintenance Of 18 . 10 Dia M . Dome , Aluminum Windows With 10 Mm Thick Multiwall Polycarbonate Sheet And 9 . 10 M . Dia Dome Windows Repairing / Maintenance Work In Kmb L. Submission Date for this Tender is 12-06-2020. Aluminium Furniture Tenders in Kisan Mandi bhawan gomti Nagar Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Supply and fixing of 6.0 mm thick compact polycarbonate sheet with Repair and maintenance of 18.10 dia M. Dome, Aluminum windows with 10 mm thick multiwall polycarbonate sheet and 9.10 M. dia dome windows repairing / maintenance work in Kishan Mandi Bhawan, Gomtinagar Lucknow. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and installation of 6mm thick new compact clear polycarbonate sheet both side UV coated (Manufacturer G.E. Plastics India Ltd. / Subic or equivalent as approved ) which blocks near-Infrared light but allows in high levels of visible light fixed with aluminum system, EPDM rubber gasket etc. on the existing dome shaped structure. The polycarbonate sheets shall be of minimum thickness 6 mm as per existing drawing and design with manufacturer specifications. The sheets shall offer high light transmission and shall be both sides UV protection coating for long term weather resistance and high impact strength. The work includes removing existing sheets from the dome and storing at the designated place as per the direction of Engineer-in-charge. The polycarbonate sheets shall be fixed in the dome with adequate provision for expansion over preinstalled structural frame work and be secured with aluminum system at all levels including all accessories like screws, washers, flashing, trims etc. complete to make a water tight skylight system including transportation, lift etc. conforming to specifications and direction of Engineer-in-Charge, The Items cost includes Repair and Maintenance of existing ladder inner and outer side, Epoxy Painting of all structure and ladders, all required materials Labors, Scaffolding, all required T & P and machineries for fixing sheets and ladders etc. and also including the cost of weather sealants, aluminum channel, screws with PVC fillers, masking tape, protective tape, backer rods, bolts, gasket, excise duty etc. to complete the work in all respect required for proper completion of the work and as per drawings and directions of the Engineer-in-charge | BI01010001010000000000000515BI0100001113 | 1 | Job. |
| 2 | 2 | Providing and fixing clear poly corbonate multiwall sheet of 10 mm thick with UV coating for window below dome side complete the work in all respect required for proper completion of the work and as per drawings and directions of the E/I | BI01010001010000000000000515BI0100001114 | 132.95 | sqm |
| 3 | 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 456.30 DSR 21.1.1.2\n\n | BI01010001010000000000000515BI0100001115 | 700.92 | Kg |
| 4 | 4 | For Aluminium shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.2.2 | BI01010001010000000000000515BI0100001116 | 77.88 | Kg. |
| 5 | 5 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).DSR 10.13 | BI01010001010000000000000515BI0100001117 | 122.1 | Kg |
| 6 | 6 | Painting two coat over existing surface priming coat on steel and other metal surfaces upto 10 cm. width or girth or small articles not exceeding 0.10 sqm. in area white superior synthetic enamel such as Luxol 3. Higloss apcolite superlac Dulux specified brushing to give an even shade and including cleaning the surface of all dirt dust and other foreign material sand papering and stopping including cost of all materials labour. Tools and plants etc. required for proper completion of the work. SOR 643 | BI01010001010000000000000515BI0100001118 | 35.6 | sqm |
| 7 | 7 | Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units. | BI01010001010000000000000515BI0100001119 | 368 | RM |
| 8 | 8 | Providing and fixing Steel fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides DSR 10.29.2 | BI01010001010000000000000515BI0100001120 | 69.13 | sqm |
| 9 | 9 | Finishing wall with premium Acrylic smooth exterior paint with silicone additives of required shade. New work two or more cloats applied @ 1.43 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (apex ultima, weather coat all guard) asian specified brushing to give an even shade and including cleaning the surface of all dirt dust and other foreign material sand papering and stopping including cost of all materials labour. Tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001121 | 358.95 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
