Public Health Engineering Department-PHED has published Annual Rate Contract For Repair Maintenance Of Submersible Vt Pumps Allied Works Annual Rate Contract For Repair Maintenance Of Submersible Vt Pumps Allied Works. Submission Date for this Tender is 22-06-2020. Wrenches and Drivers Tenders in Jammu and Jammu Rural Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: Annual rate contract for repair & Maintenance of Submersible/ VT Pumps /allied works. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Sub Pump V4 | 1 | Job | |
2 | 2 | Disconnecting of Power connections from starter panel, disengaging from delivery bend and extracting out Submersible Pump Set complete along with column pipes by hoisting chain pulley block at Tubewell, stacking of column pipes and Submersible cable properly and dismantling of NRV. | 1 | Job | |
3 | 3 | Loading of Submersible Pump Set in Mechanical transport, carriage to the Workshop and unloading. Dismantling of Submersible Pump Set at Workshop and checking for its repair. | 1 | Job | |
4 | 4 | Repairing to Pump Shaft by way of welding, turning and polishing to the actual size, making of key way. | 1 | Job | |
5 | 5 | Providing and fitting of new Pump Shaft. | 1 | Job | |
6 | 6 | Providing and fitting of new impeller. | 1 | Job | |
7 | 7 | Providing and fitting of new Neck Ring. | 1 | Job | |
8 | 8 | Providing and fitting of Shaft Sleeve. | 1 | Job | |
9 | 9 | Providing and fitting of Coupling with key. | 1 | Job | |
10 | 10 | Providing and fitting of Bearing Bush. | 1 | Job | |
11 | 11 | Providing and fitting of Bowl | 1 | Job | |
12 | 12 | Providing and fitting of Diffuser. | 1 | Job | |
13 | 13 | Repairing of rotor shaft by way of welding to ends, turning and polishing to the required size. | 1 | Job | |
14 | 14 | Providing and fitting of thrust bearing set | 1 | Job | |
15 | 15 | Providing and fitting of bearing bush for motor bowl | 1 | Job | |
16 | 16 | Providing and fitting of motor bowl upper/ lower | 1 | Job | |
17 | 17 | Assembling of Pump and then coupling with motor with proper alignment. Testing in test pit at workshop. Loading in Mechanical transport and carriage back to site of work and unloading at site | 1 | Job | |
18 | 18 | Making of cable connection of motor with Submersible cable after dressing cable ends properly. Making of each joint water proof. Lowering of Submersible Pump Set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts. Making of connections to the starter panel and testing thereof. | 1 | Job | |
19 | 19 | Sub Pump V6 | 1 | Job | |
20 | 20 | Disconnecting of Power connections from starter panel, disengaging from delivery bend and extracting out Submersible Pump Set complete along with column pipes by hoisting chain pulley block at Tubewell, stacking of column pipes and Submersible cable properly and dismantling of NRV. | 1 | Job | |
21 | 21 | Loading of Submersible Pump Set in Mechanical transport, carriage to the Workshop and unloading. Dismantling of Submersible Pump Set at Workshop and checking for its repair. | 1 | Job | |
22 | 22 | Repairing to Pump Shaft by way of welding, turning and polishing to the actual size, making of key way. | 1 | Job | |
23 | 23 | Providing and fitting of new Pump Shaft. | 1 | Job | |
24 | 24 | Providing and fitting of new impeller. | 1 | Job | |
25 | 25 | Providing and fitting of new Neck Ring. | 1 | Job | |
26 | 26 | Providing and fitting of Shaft Sleeve. | 1 | Job | |
27 | 27 | Providing and fitting of Coupling with key. | 1 | Job | |
28 | 28 | Providing and fitting of Bearing Bush. | 1 | Job | |
29 | 29 | Providing and fitting of Bowl | 1 | Job | |
30 | 30 | Providing and fitting of Diffuser. | 1 | Job | |
31 | 31 | Repairing of rotor shaft by way of welding to ends, turning and polishing to the required size. | 1 | Job | |
32 | 32 | Providing and fitting of thrust bearing set | 1 | Job | |
33 | 33 | Providing and fitting of bearing bush for motor bowl | 1 | Job | |
34 | 34 | Providing and fitting of motor bowl upper/ lower | 1 | Job | |
35 | 35 | Assembling of Pump and then coupling with motor with proper alignment. Testing in test pit at workshop. Loading in Mechanical transport and carriage back to site of work and unloading at site | 1 | Job | |
36 | 36 | Making of cable connection of motor with Submersible cable after dressing cable ends properly. Making of each joint water proof. Lowering of Submersible Pump Set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts. Making of connections to the starter panel and testing thereof. | 1 | Job | |
37 | 37 | Sub Pump V8 | 1 | Job | |
38 | 38 | Disconnecting of Power connections from starter panel, disengaging from delivery bend and extracting out Submersible Pump Set complete along with column pipes by hoisting chain pulley block at Tubewell, stacking of column pipes and Submersible cable properly and dismantling of NRV. | 1 | Job | |
39 | 39 | Loading of Submersible Pump Set in Mechanical transport, carriage to the Workshop and unloading. Dismantling of Submersible Pump Set at Workshop and checking for its repair. | 1 | Job | |
40 | 40 | Repairing to Pump Shaft by way of welding, turning and polishing to the actual size, making of key way. | 1 | Job | |
41 | 41 | Providing and fitting of new Pump Shaft. | 1 | Job | |
42 | 42 | Providing and fitting of new impeller. | 1 | Job | |
43 | 43 | Providing and fitting of new Neck Ring. | 1 | Job | |
44 | 44 | Providing and fitting of Shaft Sleeve. | 1 | Job | |
45 | 45 | Providing and fitting of Coupling with key. | 1 | Job | |
46 | 46 | Providing and fitting of Bearing Bush. | 1 | Job | |
47 | 47 | Providing and fitting of Bowl | 1 | Job | |
48 | 48 | Providing and fitting of Diffuser. | 1 | Job | |
49 | 49 | Repairing of rotor shaft by way of welding to ends, turning and polishing to the required size. | 1 | Job | |
50 | 50 | Providing and fitting of thrust bearing set | 1 | Job | |
51 | 51 | Providing and fitting of bearing bush for motor bowl | 1 | Job | |
52 | 52 | Providing and fitting of motor bowl upper/ lower | 1 | Job | |
53 | 53 | Assembling of Pump and then coupling with motor with proper alignment. Testing in test pit at workshop. Loading in Mechanical transport and carriage back to site of work and unloading at site | 1 | Job | |
54 | 54 | Making of cable connection of motor with Submersible cable after dressing cable ends properly. Making of each joint water proof. Lowering of Submersible Pump Set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts. Making of connections to the starter panel and testing thereof. | 1 | Job | |
55 | 55 | Sub Pump V10 | 1 | Job | |
56 | 56 | Disconnecting of Power connections from starter panel, disengaging from delivery bend and extracting out Submersible Pump Set complete along with column pipes by hoisting chain pulley block at Tubewell, stacking of column pipes and Submersible cable properly and dismantling of NRV. | 1 | Job | |
57 | 57 | Loading of Submersible Pump Set in Mechanical transport, carriage to the Workshop and unloading. Dismantling of Submersible Pump Set at Workshop and checking for its repair. | 1 | Job | |
58 | 58 | Repairing to Pump Shaft by way of welding, turning and polishing to the actual size, making of key way. | 1 | Job | |
59 | 59 | Providing and fitting of new Pump Shaft. | 1 | Job | |
60 | 60 | Providing and fitting of new impeller. | 1 | Job | |
61 | 61 | Providing and fitting of new Neck Ring. | 1 | Job | |
62 | 62 | Providing and fitting of Shaft Sleeve. | 1 | Job | |
63 | 63 | Providing and fitting of Coupling with key. | 1 | Job | |
64 | 64 | Providing and fitting of Bearing Bush. | 1 | Job | |
65 | 65 | Providing and fitting of Bowl | 1 | Job | |
66 | 66 | Providing and fitting of Diffuser. | 1 | Job | |
67 | 67 | Repairing of rotor shaft by way of welding to ends, turning and polishing to the required size. | 1 | Job | |
68 | 68 | Providing and fitting of thrust bearing set | 1 | Job | |
69 | 69 | Providing and fitting of bearing bush for motor bowl | 1 | Job | |
70 | 70 | Providing and fitting of motor bowl upper/ lower | 1 | Job | |
71 | 71 | Assembling of Pump and then coupling with motor with proper alignment. Testing in test pit at workshop. Loading in Mechanical transport and carriage back to site of work and unloading at site | 1 | Job | |
72 | 72 | Making of cable connection of motor with Submersible cable after dressing cable ends properly. Making of each joint water proof. Lowering of Submersible Pump Set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts. Making of connections to the starter panel and testing thereof. | 1 | Job | |
73 | 73 | VT Pump 1.80 lac GPH X 34.5 Mtr. | 1 | Job | |
74 | 74 | Extraction of VT Pump Set complete including liner assembly and pump assembly after disconnecting of all the power connections, dismounting of motor using special tools and tackles, skilled man power. | 1 | Job | |
75 | 75 | Loading of complete pump set into Mechanical Transport and carriage to workshop and unloading thereof. | 1 | Job | |
76 | 76 | Dismantling of Pump assembly, checking of parts needs to be repaired/ replaced including liner assembly. | 1 | Job | |
77 | 77 | Dismantling of Pump assembly, checking of parts needs to be repaired/ replaced including liner assembly. | 1 | Job | |
78 | 78 | Lowering of VT Pump Set complete including linear assembly with proper alignment, fitting of discharge head, delivery line, packing box, ratchet assembly, coupling pulley and fitting of motor. Making of connections, checking of pump setting and testing thereof. | 1 | Job | |
79 | 79 | Repair to impeller shaft by way of welding, turning, polishing to the required size. Making of key ways for holding impeller and threading at one end as per thread size of the shaft coupler. | 1 | Job | |
80 | 80 | Providing and fitting of new impeller shaft. | 1 | Job | |
81 | 81 | Repair to bowl body by extracting out the damaged bowl bush, fabrication of new bush and fitting the same to the body including turning and polishing to the required size. | 1 | Job | |
82 | 82 | Providing and fitting of new bowl assembly. | 1 | Job | |
83 | 83 | Providing and fitting of new body bush. | 1 | Job | |
84 | 84 | Providing and fitting of new impeller. | 1 | Job | |
85 | 85 | Repair to impeller by remetalling on damaged portion, turning, finishing and balancing. | 1 | Job | |
86 | 86 | Fabrication and fitting of neck ring to bowl body. | 1 | Job | |
87 | 87 | Providing and fitting of guide spider | 1 | Job | |
88 | 88 | Providing and fitting of guide spider bush | 1 | Job | |
89 | 89 | Providing and fitting of discharge head bolt | 1 | Job | |
90 | 90 | Repair to guide spider | 1 | Job | |
91 | 91 | Providing and fitting of stuffing box | 1 | Job | |
92 | 92 | Repair to stuffing box | 1 | Job | |
93 | 93 | Repair to pump body/ suction | 1 | Job | |
94 | 94 | Providing and fitting of impeller holding split rings. | 1 | Job | |
95 | 95 | Stage casing bush Gun Metal | 1 | Job | |
96 | 96 | Providing and fitting of top shaft as per sample. | 1 | Job | |
97 | 97 | Providing and fitting of shaft protection sleeves. | 1 | Job | |
98 | 98 | Providing and fitting of shaft coupller. | 1 | Job | |
99 | 99 | Providing and fitting of liner shaft | 1 | Job | |
100 | 100 | Providing and fitting of shaft enclosing tubes. | 1 | Job | |
101 | 101 | Repair to top shaft | 1 | Job | |
102 | 102 | Repair to shaft enclosing tubes by way of cutting the tube from the centre and welding of both the threaded ends with superior quality welding rods and checking of its proper alignment. Then threading the both ends internally as per size of bush. | 1 | Job | |
103 | 103 | Providing and fitting of gun metal bush for shaft enclosing tubes. | 1 | Job | |
104 | 104 | Providing and fitting of bearing 7319. | 1 | Job | |
105 | 105 | Providing and fitting of bearing 16026. | 1 | Job | |
106 | 106 | VT Pump 1.50 lac GPH X 45 Mtr. | 1 | Job | |
107 | 107 | Extraction of VT Pump Set complete including liner assembly and pump assembly after disconnecting of all the power connections, dismounting of motor using special tools and tackles, skilled man power. | 1 | Job | |
108 | 108 | Loading of complete pump set into Mechanical Transport and carriage to workshop and unloading thereof. | 1 | Job | |
109 | 109 | Dismantling of Pump assembly, checking of parts needs to be repaired/ replaced including liner assembly. | 1 | Job | |
110 | 110 | Dismantling of Pump assembly, checking of parts needs to be repaired/ replaced including liner assembly. | 1 | Job | |
111 | 111 | Lowering of VT Pump Set complete including linear assembly with proper alignment, fitting of discharge head, delivery line, packing box, ratchet assembly, coupling pulley and fitting of motor. Making of connections, checking of pump setting and testing thereof. | 1 | Job | |
112 | 112 | Repair to impeller shaft by way of welding, turning, polishing to the required size. Making of key ways for holding impeller and threading at one end as per thread size of the shaft coupler. | 1 | Job | |
113 | 113 | Providing and fitting of new impeller shaft. | 1 | Job | |
114 | 114 | Repair to bowl body by extracting out the damaged bowl bush, fabrication of new bush and fitting the same to the body including turning and polishing to the required size. | 1 | Job | |
115 | 115 | Providing and fitting of new bowl assembly. | 1 | Job | |
116 | 116 | Providing and fitting of new body bush. | 1 | Job | |
117 | 117 | Providing and fitting of new impeller. | 1 | Job | |
118 | 118 | Repair to impeller by remetalling on damaged portion, turning, finishing and balancing. | 1 | Job | |
119 | 119 | Fabrication and fitting of neck ring to bowl body. | 1 | Job | |
120 | 120 | Providing and fitting of guide spider | 1 | Job | |
121 | 121 | Providing and fitting of guide spider bush | 1 | Job | |
122 | 122 | Providing and fitting of discharge head bolt | 1 | Job | |
123 | 123 | Repair to guide spider | 1 | Job | |
124 | 124 | Providing and fitting of stuffing box | 1 | Job | |
125 | 125 | Repair to stuffing box | 1 | Job | |
126 | 126 | Repair to pump body/ suction | 1 | Job | |
127 | 127 | Providing and fitting of impeller holding split rings. | 1 | Job | |
128 | 128 | Stage casing bush Gun Metal | 1 | Job | |
129 | 129 | Providing and fitting of top shaft as per sample. | 1 | Job | |
130 | 130 | Providing and fitting of shaft protection sleeves. | 1 | Job | |
131 | 131 | Providing and fitting of shaft coupller. | 1 | Job | |
132 | 132 | Providing and fitting of liner shaft | 1 | Job | |
133 | 133 | Providing and fitting of shaft enclosing tubes. | 1 | Job | |
134 | 134 | Repair to top shaft | 1 | Job | |
135 | 135 | Repair to shaft enclosing tubes by way of cutting the tube from the centre and welding of both the threaded ends with superior quality welding rods and checking of its proper alignment. Then threading the both ends internally as per size of bush. | 1 | Job | |
136 | 136 | Providing and fitting of gun metal bush for shaft enclosing tubes. | 1 | Job | |
137 | 137 | Providing and fitting of bearing 7319. | 1 | Job | |
138 | 138 | Providing and fitting of bearing 16026. | 1 | Job | |
139 | 139 | Column pipes/ Flanges | 1 | Job | |
140 | 140 | Providing and fitting of G.I column pipes of 3 mtr length having flanges at both ends:- | 1 | Job | |
141 | 141 | a) 65 mm dia | 1 | Job | |
142 | 142 | b) 80 mm dia | 1 | Job | |
143 | 143 | c) 100 mm dia | 1 | Job | |
144 | 144 | d) 125 mm dia | 1 | Job | |
145 | 145 | e) 150 mm dia | 1 | Job | |
146 | 146 | Providing and fitting of M.S column pipes of 3 mtr length having flanges at both ends:- | 1 | Job | |
147 | 147 | a) 100 mm dia | 1 | Job | |
148 | 148 | b) 125 mm dia | 1 | Job | |
149 | 149 | c) 150 mm dia | 1 | Job | |
150 | 150 | d) 200 mm dia | 1 | Job | |
151 | 151 | Fabrication and fitting of M.S flange to G.I/ M.S column pipes of following ID:- | 1 | Job | |
152 | 152 | a) 65 mm dia | 1 | Job | |
153 | 153 | b) 80 mm dia | 1 | Job | |
154 | 154 | c) 100 mm dia | 1 | Job | |
155 | 155 | d) 125 mm dia | 1 | Job | |
156 | 156 | e) 150 mm dia | 1 | Job | |
157 | 157 | f) 200 mm dia | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail