Water Supply Maintenance And Repairing For Zone No . 4 In Ward No . 6 , 7 , 9, TOWN HALL AURANGABAD-Maharashtra

Water Supply Maintenance And Repairing For Zone No . 4 In Ward No . 6 , 7 , 9 , Excavation For Foundation/Pipe Trenches In Earth , Soils Of All Ltypes , Sand , Gravel And Soft Murum , Including Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below , Stacking And Spreading As Directed , Normal Dewatering Preparing The Bed For Foundation And Excluding Back Filling Etc Complete ( Bd-A-1/259 ) Lift 0 To 1 . 5 M Mjp/Dsr/2018-2019/ Page No . 34 I . No . 1 , Excavation For Foundation/Pipe Trenches In Hard Murum And Boulders , W . B . Mn . Road Including Removing The Excavated Material Upto A Distance Of 50 M Beyond The Area And Lifts As Below , Stacking And Spreading As Directed By Engineer-In-Charge , Normal Dewatering , Preparing The Bed For Foundation And Excluding Backfilling , Etc . Complete ( Bd-A-3/259 ) Lift 0 To 1 . 5 M Mjp/Dsr/2018-2019 Page No . :33 Item No . :3 , Excavation For Foundation/Pipe Trenches In Soft Rock And Old Cement And Lime Masonry Foundation Asphalt Road By All Means Including Removing The Excavated Material Upto A Distance Of 50 M Beyond The Are And Lifts As Below , Stacking As Directed By Engineer-In-Charge , Normal Dewatering , Preparing The Bed For Foundation And Excluding Backfilling Etc Complete ( Bd-A-4/259 ) Lift 0 To 1 . 5 M Mjp/Dsr/2018-2019/ Page No . 34 I . No . 5 , Excavation For Foundation / Pipe Line Trenches In Hard Rock And Concrete Road By Chiselling , Wedging , Line Drilling By Mechanical Means Other Than Blasting Including Trimming And Levelling The Bed , Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below , Stacking And Spreading As Directed , Normal Dewatering , Preparing The Bed For Foundation And Excluding Backfilling , Etc Comp . Lift 0 To 1 . 50 M Mjp/Dsr/2016-2017/ Page No . 35 I . No . 7 , Dewatering The Excavated Trenched And Pools Of Water In The Building Trenches /Pipeline Trenches , Well Works By Using Pumps And Other Devices Including Disposing Off Water To Safe Distance As Directed By Engineer-In-Charge ( Including Cost Of Machinery , Labour , Fuel ) , Etc Complete . , Providing And Supplying Ac Pressure Pipes Manufactred & Tested As Per 150 160 Standerds Of Following Class & Diameters In Standared Length Etc . , 80 Mm Dia Ac Pipe , 100 Mm Dia Ac Pipe , 150 Mm Dia Ac Pipe , 200 Mm Dia Ac Pipe , 250 Mm Dia Ac Pipe , Providing And Supplying C . I . Detachable Joints Suitable For A . C . Pressure Pipes Manufactured As Per Is-1538/1993 Standard Of Following Class And Diameter Including Cost Of All Taxes ( Central And Local ) , Insurance Railway Freight , Inspection Charges , Unloading From Railway Wagon , Loading Into Truck , Trnsporting To Departmental Store/Site , Unloading , Stacking And Ocst Of Rubber Rings , Nut Bolts , Etc Complete . , 80 Mm Dia Cid Joint , 100 Mm Dia Cid Joints , 150 Mm Dia Cid Joints , 200 Mm Dia Cid Joints , 250 Mm Dia Cid Joints , 300 Mm Dia Cid Joints , Providing And Supplying Isi Standard M . S . Specials Of Required Thickness With 3 Coats Of Approved Make Epoxy Paint ( Shalimar , Ciba Or Mahindra & Mahindra Make ) From Inside And Outside Surface Including All Taxes ( Central And Local ) , Octroi , Inspection Charges , Transportation To Stores/Site And Stackding , Etc . Complete E ) Plain Ended Specials Or Plain Ended Branch Flanged Specials Of All Diameters . , Providing And Supplying Isi Mark D . I . S&S Pipes ( Push On Joints Pressure Pipes ) Of Di Of Following Class And Diameters Confirming To The Is Specification Inclusive Cost Of Jointing Materials ( Rubber Gasket Of Epdm Quality ) Including All Statutary Duties And Taxes Levied By Goi & Gom In All Respect , Education Cess , Vat , Pasrty Inspection Charges Of Tpi Agency Approved By Mjp Including Transit Insurance , Railway Freight , Unloading From Railway Wagon , Loading Into Truck , Transportation To Departmental Store/Site Of Work , Unloading , Stacking Etc . Complete As Directed By Engineer-In-Charge ( Is-1536/2001 For Pipes & Is 158/1969 & Is-12820/1989 Or Latest Endition/Revision With Amendments For Rubber Gasket . ) ( Bd-A-4/259 ) Lift 0 To 1 . 5 M Mjp/Dsr/2018-2019/ Page No . 58 I . No . 3 ( B ) , 100 Mm Dia Dik-7 Grade , 150 Mm Dia Dik-7 Grade , 200 Mm Dia Dik-7 Grade , Lowering Laying And Jointing With Cid Joints Ac Pressure Pipes And Ci Or Ms Specials Of Following Class And Diameter Including Conveyance From Stores To Site Of Works Cost Of Labour And Material Giving Satisfactory Hydraulic Testing Etc . As Per Isi Code Etc Complete But Excluding Cost Of Cid Joints Nut-Bolts Rubber Rings . , 80 Mm Dia Ac Pipe , 100 Mm Dia Ac Pipe , 150 Mm Dia Ac Pipe , 200 Mm Dia Ac Pipe , 250 Mm Dia Ac Pipe , Lowering , Laying And Jointing With Sbr Rubber Gaskets C . I . S/S Pipes Of Various Classes With Ci/Ms Specials Of Following Diameters In Proper Position , Grade And Alignment As Directed By Engineer-In-Charge Including Coveyance Of Materials From Stores To Site Of Work , Including Cost Of Jointing Materils And Rubber Rings , Labour , Giving Hydraulic Testing , Etc . Complete , 100 Mm Dia Dik-7 , 150 Mm Dia Dik-7 , 200 Mm Dia Dik-7 , Removing And Refixing Half Body Sluice Valve Including Excavation Refilling Cost Of Rubber Packing , Nut Bolt , With Gate , Gland Rope , Repair By Welding Etc Complete , 80 Mm Dia , 100 Mm Dia , 150 Mm Dia , 200 Mm Dia , 250 Mm Dia , 300 Mm Dia , 350 Mm Dia , 400 Mm Dia , 450 Mm Dia , 500 Mm Dia , Providing Double Flanged Sluice Valves Conforming To Is-2906/14846 Including Worm Gear Arrangements As Per Test Pressure , Stainless Steel Spindle , Caps , Including All Taxes , Transportation , Etc . Complete . , 80 Mm Dia S . V . , 100 Mm Dia S . V . , 150 Mm Dia S . V . , 200 Mm Dia S . V . , 250 Mm Dia S . V . , 300 Mm Dia S . V . , Lowering Layding And Jointing In Position Following Cidf Reflux Valve , Butterflay Valave And Sluice Valve Etc Complete , 80 Mm Dia S . V . , 100 Mm Dia S . V . , 150 Mm Dia S . V . , 200 Mm Dia S . V . , 250 Mm Dia S . V . , 300 Mm Dia S . V . , Removing Remaking Existing Cross Connection Including Excavation Broken Cid Joints And Tee Including Excavation And Refilling Etc Complete , 80 Mm Dia , 100 Mm Dia , 150 Mm Dia , 200 Mm Dia , 250 Mm Dia , 300 Mm Dia , 350 Mm Dia , 30% Rate Of Making Cross Connection , Checking Private Water Connection Including Excavation Cost Of Gi Specials Clamp Removing Reconnecting Water Connection Etc Complete , Cutting And Champhering Of Pipes Of Following Diameters Including Cost Of All Materials And Labour Involved , Etc . Complete As Directed By Engineer-In-Charge ( For All Class Of Pipes ) , A . C . Pipe , 80 Mm Dia Ac , 100 Mm Dia Ac , 150 Mm Dia Ac , 200 Mm Dia Ac , 250 Mm Dia Ac , C . I . Pipes , 80 Mm Dia Ci , 100 Mm Dia Ci , 150 Mm Dia Ci , 200 Mm Dia Ci , 250 Mm Dia Ci , Providing And Supplying Gun Metal Check Nut Of Following Diameter Of Sluice Valve Standard Specification Etc Complete , ( As Per Market Rate ) , 80 Mm Dia , 100 Mm Dia , 150 Mm Dia , 200 Mm Dia , 250 Mm Dia , 300 Mm Dia , 350 Mm Dia , 400 Mm Dia , Providing And Supplying S . S . Spindle Rod As Per Standard Specifications And Suitable For Sluice Valve Etc Complete , ( As Per Market Rate ) , 80 Mm Dia , 100 Mm Dia , 150 Mm Dia , 200 Mm Dia , 250 Mm Dia , 300 Mm Dia , 350 Mm Dia , 400 Mm Dia , 450 Mm Dia , 500 Mm Dia , Providing Of C . I . Mechanical Compression Collar Coupling Suitable For C . I . Spun Pipes ( As Per Is-1536/2001 ) And Complet

INR 600 /-

INR 8338.0 /-

INR 8.33 Lakhs /-

NAME OF WORK : Water supply Maintenance and repairing for Zone no. 4 in ward no. 6,7,9
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Excavation for foundation/pipe trenches in earth, soils of all ltypes, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering preparing the bed for foundation and excluding back filling etc complete (Bd-A-1/259) Lift 0 to 1.5 M MJP/DSR/2018-2019/ Page No.34 I.no. 1	1	50	m3
2	2	Excavation for foundation/pipe trenches in hard murum and boulders, W.B.MN. Road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete ( Bd-A-3/259) Lift 0 to 1.5 M MJP/DSR/2018-2019 Page No.:33 Item no.:3	2	30	m3
3	3	Excavation for foundation/pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 M beyond the are and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc complete (Bd-A-4/259) Lift 0 to 1.5 M MJP/DSR/2018-2019/ Page No.34 I.no. 5	3	12	m3
4	4	Excavation for foundation / pipe line trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2016-2017/ Page No.35 I.No.7	4	8	m3
5	5	Dewatering the excavated trenched and pools of water in the building trenches /pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc complete.	5	55	Nos
6	6	Providing and supplying AC pressure pipes Manufactred & tested as per 150 160 standerds of following class & diameters in standared length etc.	6	0.001	Nos
7	7	80 mm dia AC pipe	7	10	rmt
8	8	100 mm dia AC pipe	8	15	rmt
9	9	150 mm dia AC pipe	9	10	rmt
10	10	200 mm dia AC pipe	10	10	rmt
11	11	250 mm dia AC pipe	11	5	rmt
12	12	Providing and supplying C.I.detachable joints suitable for A.C. pressure pipes manufactured as per IS-1538/1993 standard of following class and diameter including cost of all taxes (Central and local), insurance railway freight, inspection charges, unloading from railway wagon, loading into truck, trnsporting to departmental store/site,unloading, stacking and ocst of rubber rings, nut bolts, etc complete.	12	0.001	Nos
13	13	80 mm dia CID joint	13	25	Nos
14	14	100 mm dia CID joints	14	35	Nos
15	15	150 mm dia CID joints	15	25	Nos
16	16	200 mm dia CID joints	16	15	Nos
17	17	250 mm dia CID joints	17	10	Nos
18	18	300 mm dia CID joints	18	3	Nos
19	19	Providing and supplying ISI standard M.S. specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside surface including all taxes (Central and local), octroi, inspection charges, transportation to stores/site and stackding, etc. complete e) Plain ended specials or plain ended branch flanged specials of all diameters.	19	100	kg
20	20	Providing and supplying ISI mark D.I.S&S pipes (push on joints pressure pipes) of DI of following class and diameters confirming to the IS specification inclusive cost of jointing materials (rubber gasket of EPDM quality) including all statutary duties and taxes levied by GOI & GOM in all respect, education cess, VAT, pasrty inspection charges of TPI agency approved by MJP including transit insurance, railway freight, unloading from railway wagon, loading into truck, transportation to departmental store/site of work, unloading, stacking etc. complete as directed by Engineer-in-charge (IS-1536/2001 for pipes & IS 158/1969 & IS-12820/1989 or latest endition/revision with amendments for rubber gasket.) (Bd-A-4/259) Lift 0 to 1.5 M MJP/DSR/2018-2019/ Page No. 58 I.no. 3(B)	20	0.001	m3
21	21	100 mm dia DIK-7 grade	21	5	rmt
22	22	150 mm dia DIK-7 grade	22	5	rmt
23	23	200 mm dia DIK-7 grade	23	5	rmt
24	24	Lowering laying and jointing with CiD joints AC pressure pipes and CI or MS specials of following class and diameter including conveyance from stores to site of works cost of labour and material giving satisfactory hydraulic testing etc. as per ISI code etc complete but excluding cost of CID joints nut-bolts rubber rings.	24	0.001	Nos
25	25	80 mm dia AC pipe	25	10	rmt
26	26	100 mm dia AC pipe	26	30	rmt
27	27	150 mm dia AC pipe	27	25	rmt
28	28	200 mm dia AC pipe	28	5	rmt
29	29	250 mm dia AC pipe	29	5	rmt
30	30	Lowering ,laying and jointing with SBR rubber gaskets C.I. S/S pipes of various classes with CI/MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including coveyance of materials from stores to site of work, including cost of jointing materils and rubber rings, labour, giving hydraulic testing, etc. complete	30	0.001	Nos
31	31	100 mm dia DIK-7	31	5	rmt
32	32	150 mm dia DIK-7	32	5	rmt
33	33	200 mm dia DIK-7	33	5	rmt
34	34	Removing and refixing half body sluice valve including excavation refilling cost of rubber packing, nut bolt, with gate, gland rope, repair by welding etc complete	34	0.001	Nos
35	35	80 mm dia	35	9	Nos
36	36	100 mm dia	36	19	Nos
37	37	150 mm dia	37	26	Nos
38	38	200 mm dia	38	10	Nos
39	39	250 mm dia	39	15	Nos
40	40	300 mm dia	40	15	Nos
41	41	350 mm dia	41	6	Nos
42	42	400 mm dia	42	7	Nos
43	43	450 mm dia	43	4	Nos
44	44	500 mm dia	44	2	Nos
45	45	Providing double flanged Sluice valves conforming to IS-2906/14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including all taxes, transportation, etc. complete.	45	0.001	Nos
46	46	80 mm dia S.V.	46	1	Nos
47	47	100 mm dia S.V.	47	2	Nos
48	48	150 mm dia S.V.	48	1	Nos
49	49	200 mm dia S.V.	49	1	Nos
50	50	250 mm dia S.V.	50	1	Nos
51	51	300 mm dia S.V.	51	0.001	Nos
52	52	Lowering layding and jointing in position following CIDF reflux valve, Butterflay valave and sluice valve etc complete	52	0.001	Nos
53	53	80 mm dia S.V.	53	1	Nos
54	54	100 mm dia S.V.	54	2	Nos
55	55	150 mm dia S.V.	55	1	Nos
56	56	200 mm dia S.V.	56	1	Nos
57	57	250 mm dia S.V.	57	1	Nos
58	58	300 mm dia S.V.	58	0.001	Nos
59	59	Removing remaking existing cross connection including excavation broken CID joints and Tee including excavation and refilling etc complete	59	0.001	Nos
60	60	80 mm dia	60	10	Nos
61	61	100 mm dia	61	10	Nos
62	62	150 mm dia	62	10	Nos
63	63	200 mm dia	63	5	Nos
64	64	250 mm dia	64	5	Nos
65	65	300 mm dia	65	1	Nos
66	66	350 mm dia	66	1	Nos
67	67	30% Rate of making cross connection	67	0.001	Nos
68	68	Checking Private Water connection including excavation Cost of GI specials clamp removing reconnecting water connection etc complete	68	25	Nos
69	69	Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes )	69	0.001	Nos
70	70	A.C. pipe	70	0.001	Nos
71	71	80 mm dia AC	71	19	Nos
72	72	100 mm dia AC	72	30	Nos
73	73	150 mm dia AC	73	25	Nos
74	74	200 mm dia AC	74	15	Nos
75	75	250 mm dia AC	75	10	Nos
76	76	C.I.pipes	76	0.001	Nos
77	77	80 mm dia CI	77	5	Nos
78	78	100 mm dia CI	78	5	Nos
79	79	150 mm dia CI	79	5	Nos
80	80	200 mm dia CI	80	4	Nos
81	81	250 mm dia CI	81	4	Nos
82	82	Providing and supplying Gun metal check nut of following diameter of sluice valve standard specification etc complete	82	0.001	Nos
83	83	(As Per Market rate )	83	0.001	Nos
84	84	80 mm dia	84	5	Nos
85	85	100 mm dia	85	12	Nos
86	86	150 mm dia	86	5	Nos
87	87	200 mm dia	87	5	Nos
88	88	250 mm dia	88	5	Nos
89	89	300 mm dia	89	2	Nos
90	90	350 mm dia	90	3	Nos
91	91	400 mm dia	91	1	Nos
92	92	Providing and supplying S.S. spindle rod as per standard specifications and suitable for sluice valve etc complete	92	0.001	Nos
93	93	(As Per Market rate )	93	0.001	Nos
94	94	80 mm dia	94	5	Nos
95	95	100 mm dia	95	15	Nos
96	96	150 mm dia	96	10	Nos
97	97	200 mm dia	97	5	Nos
98	98	250 mm dia	98	7	Nos
99	99	300 mm dia	99	5	Nos
100	100	350 mm dia	100	3	Nos
101	101	400 mm dia	101	1	Nos
102	102	450 mm dia	102	1	Nos
103	103	500 mm dia	103	1	Nos
104	104	Providing of C.I. Mechanical compression collar coupling suitable for C.I. spun pipes (as per IS-1536/2001) and complete with sealing rubber gasket of SBR, C.I.follower glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS : 1538/1993)	104	0.001	Nos
105	105	150 mm dia	105	3	Nos
106	106	200 mm dia	106	4	Nos
107	107	250 mm dia	107	3	Nos
108	108	300 mm dia	108	2	Nos
109	109	350 mm dia	109	2	Nos
110	110	450 mm dia	110	2	Nos
111	111	Providing supplying lowering laying and jointing ISI mark G.I.pipes of following class and dia etc complete	111	0.001	Nos
112	112	15 mm dia G.I. Pipe	112	12	Nos
113	113	20 mm dia G.I.pipe	113	10	Nos
114	114	25 mm dia G.I. Pipe	114	0.001	Nos
115	115	50 mm dia G.I.pipe	115	10	Nos
116	116	Providing and fixing water level indicator upto 5 M height including M.S.enamelled gauge plate 300 mm wide and 3 mm thick, copper float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc.complete.	116	2	Nos
117	117	Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipe line, irrespecrtive ofdiameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.)	117	0.001	Nos
118	118	80 mm dia C/C	118	0.001	nos
119	119	100 mm dia C/C	119	1	Nos
120	120	150 mm dia C/C	120	1	Nos
121	121	200 mm dia C/C	121	1	Nos
122	122	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc complete	122	100	m3
123	123	Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D.I. pipes of all class for tyton joints including all taxes (Central and Local). Inspection charges, transportation to departmental stores/site, etc. complete.	123	0.001	Nos
124	124	Sealing 'O' Rings of SBR (for CID, joints)	124	0.001	Nos
125	125	80 mm dia	125	10	Nos
126	126	100 mm dia	126	40	Nos
127	127	150 mm dia	127	20	Nos
128	128	Removing and refixing C.I.gland plate including necessary excavation, refilling, cost of gland rope, nut bolt, greass etc complete	128	0.001	Nos
129	129	30% Rate of laying sluice valve	129	0.001	Nos
130	130	80 mm dia	130	4	Nos
131	131	100 mm dia	131	5	Nos
132	132	150 mm dia	132	5	Nos
133	133	200 mm dia	133	5	Nos
134	134	250 mm dia	134	2	Nos
135	135	300 mm dia	135	2	Nos
136	136	350 mm dia	136	2	Nos
137	137	400 mm dia	137	2	Nos
138	138	450 mm dia	138	5	Nos
139	139	500 mm dia	139	1	Nos
140	140	Providing and supplying M.S. gland plate including cutting, welding and finishing as per required valve size etc complete.	140	0.001	Nos
141	141	As per Market Rate	141	0.001	Nos
142	142	80 mm dia	142	2	Nos
143	143	100 mm dia	143	5	Nos
144	144	150 mm dia	144	2	Nos
145	145	200 mm dia	145	2	Nos
146	146	250 mm dia	146	2	Nos
147	147	300 mm dia	147	2	Nos
148	148	Supplying and fabricating valve key & hollow pipe Matching to existing valve spindle rod and welding with the extended pipe in T shape including anticorrosive paint finished with blue colour oil paint etc complete.	148	0.001	Nos
149	149	a) 80 mm dia to 200 mm dia sluice valve	149	3	Nos
150	150	b) 250 mm dia to 500 mm dia sluice valve	150	3	Nos
151	151	Repair of valve key Matching to existing Valve spindle rod including welding and finishing etc complete.	151	0.001	Nos
152	152	a) 80 mm dia to 200 mm dia sluice valve	152	6	Nos
153	153	b) 250 mm dia to 500 mm dia sluice valve	153	8	Nos
154	154	Supplying and fabricating M.S. clamp with required nos of holes etc complete	154	0.001	Nos
155	155	80 mm dia	155	2	Nos
156	156	100 mm dia	156	5	Nos
157	157	150 mm dia	157	7	Nos
158	158	200 mm dia	158	5	Nos
159	159	250 mm dia	159	4	Nos
160	160	300 mm dia	160	2	Nos
161	161	Removing and refixing of level Indicator with required painting, wire, rope and pully fixing placing in proper etc complete	161	1	Nos
162	162	Disconnection of unauthorised water supply connection this service applicable for area under judicial of Maintance work as directed by Engineer-in-charge.	162	5	Nos
163	163	Providing & laying in situ cement concrete M-15/1:2:4 trap/granite/gneiss Metal for foundation & bedding including dewatering compacting & cutting etc complete. Space No.BdE-1 Page no.287	163	3	m3