Chandigarh Administration Engineering Department has published Repair And Renovation Of Sub Station Sector 36 C Under Sub Division No 7 Sector 35 B Ut Chandigarh. Submission Date for this Tender is 03-06-2020. Substation Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.
Name of Work: Repair and renovation of Sub-Station (Sector- 36C) under Sub Division No.7, Sector-35B U.T. Chandigarh". | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : | |||
2 | 1.2 | All kinds of soil | |||
3 | 1.3 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. | NSR | 4 | mtr. |
4 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | NSR1 | ||
5 | 2.1 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | NSR2 | 0.25 | cum |
6 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : plateform of tanks. | NSR3 | ||
7 | 3.1 | Cement mortar 1:4 (1 cement : 4 coarse sand) \n | NSR4 | 0.25 | cum |
8 | 4 | 12 mm cement plaster of mix: | NSR5 | ||
9 | 4.1 | 1:6 (1 cement : 6 coarse sand) \n | NSR6 | 4 | sqrm. |
10 | 5 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : | NSR7 | ||
11 | 5.1 | Orissa pattern W.C. pan of size 580x440 mm | NSR8 | 2 | each |
12 | 6 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : | NSR9 | ||
13 | 6.1 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | NSR10 | 2 | each |
14 | 7 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. | NSR11 | ||
15 | 7.1 | 10 litre (full flush) capacity-white | NSR12 | 2 | Nos. |
16 | 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | NSR13 | ||
17 | 8.1 | Flexible pipe | NSR14 | ||
18 | 8.2 | 32 mm dia | NSR15 | 2 | each |
19 | 9 | Providing and fixing soil, waste and vent pipes : | NSR16 | ||
20 | 9.1 | 100 mm dia. \n | NSR17 | ||
21 | 9.2 | Sand cast iron S&S pipe as per IS: 1729 (L.S) | NSR18 | 3 | mtr. |
22 | 9.3 | 75 mm diameter : | NSR19 | ||
23 | 9.4 | Sand cast iron S&S pipe as per IS: 1729 (L.S) | NSR20 | 2 | mtr. |
24 | 10 | Providing and fixing collar: | NSR21 | ||
25 | 10.1 | 100 mm | NSR22 | ||
26 | 10.2 | Sand cast iron S&S as per IS - 1729\n | NSR23 | 1 | each |
27 | 10.3 | 75 mm | NSR24 | ||
28 | 10.4 | Sand cast iron S&S as per IS - 1729 \n | NSR25 | 1 | each |
29 | 11 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | NSR26 | ||
30 | 11.1 | 100 mm inlet and 75 mm outlet\n | NSR27 | ||
31 | 11.2 | Sand Cast Iron S&S as per IS- 1729 | NSR28 | 1 | each |
32 | 12 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. | NSR29 | ||
33 | 12.1 | 20 mm dia. nominal bore\n | NSR30 | 5 | metre |
34 | 13 | Providing & Fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : | NSR31 | ||
35 | 13.1 | 15 mm dia nominal bore\n | NSR32 | 5 | metre |
36 | 13.2 | 20 mm dia. nominal bore\n | NSR33 | 3 | metre |
37 | 14 | Providing and Fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. | NSR34 | ||
38 | 14.1 | 20 mm dia nominal bore\n | NSR35 | 4 | Metre |
39 | 15 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : | NSR36 | ||
40 | 15.1 | 15 mm nominal bore | NSR37 | 1 | each |
41 | 16 | Providing and fixing uplasticised PVC connection pipe with brass unions : | NSR38 | ||
42 | 16.1 | 30 cm length | NSR39 | ||
43 | 16.2 | 15 mm nominal bore | NSR40 | 5 | each |
44 | 17 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) | NSR41 | ||
45 | 17.1 | 15 mm nominal bore (L.S.) | NSR42 | 1 | each |
46 | 17.2 | 20 mm nominal bore (L.S.) | NSR43 | 1 | each |
47 | 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1 x 500 Ltr | NSR44 | 500 | ltr |
48 | 19 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | NSR45 | ||
49 | 19.1 | 15 mm nominal bore | NSR46 | 2 | each |
50 | 20 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | NSR47 | 7 | each |
51 | 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | NSR48 | ||
52 | 21.1 | 15 mm nominal bore | NSR49 | 5 | each |
53 | 22 | Cutting holes up to 30x30 cm in walls including making good the same: | NSR50 | ||
54 | 22.1 | With common burnt clay F.P.S. (non modular) bricks \n | NSR51 | 1 | each |
55 | 23 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. | NSR52 | 1 | each |
56 | 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | NSR53 | 30 | sqm |
57 | 25 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | NSR54 | 6 | sqm |
58 | 26 | Providing and fixing to existing door frames. | NSR55 | ||
59 | 27 | 25 mm thick PVC flush door shutters made out of a one piece Multichamber extruded PVC section of the size of 762 mm X 25 mm or lessas per requirement with an average wall thickness of 1 mm (± 0.3 mm).PVC foam end cap of size 23x10 mm are provided on both verticaledges to ensure the overall thickness of 25 mm. M.S. tube havingdimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted alongthe hinge side of the door. Core of the door shutter should be filled withHigh Density Polyurethane foam. The Top & Bottom edges of theshutterare covred with an end-cap of the size 25 mm X 11 mm. Door shuttershall be reinforced with special polymeric reinforcements as permanufacturer’s specification and direction of Engineer-in-charge to takeup necessary hardware and fixtures. Stickers indicating the locationsof hardware will be pasted at appropriate places. | NSR56 | 5 | sqm |
60 | 28 | Providing and fixing factory made P.V.C. door frame of size 50x47 mmwith a wall thickness of 5 mm, made out of extruded 5mm rigid PVCfoam sheet, mitred at corners and joined with 2 Nos of 150 mm longbrackets of 15x15 mm M.S. square tube, the vertical door frame profilesto be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDMrubber gasket weather seal to be provided through out the frame. Thedoor frame to be fixed to the wall using M.S. screws of 65/100 mm sizecomplete as per manufacturer’s specification and direction of Engineerin-Charge. | NSR57 | 19 | metre |
61 | 29 | Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty:\n | NSR58 | ||
62 | 29.1 | Float glass panes of thickness 4 mm | NSR59 | 2 | Sqm |
63 | 30 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : | NSR60 | ||
64 | 30.1 | Of area beyond 3 sq. metres | NSR61 | 4 | each |
65 | 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : | NSR62 | ||
66 | 31.1 | Old work (one or more coats) | NSR63 | 39 | sqm |
67 | 32 | Dismantling of floor tiles and wall tiles complete in all respect. | NSR64 | 387.36 | Sft |
68 | 33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | NSR65 | ||
69 | 33.1 | 20mm Nominal Bore\n | NSR66 | 2 | each |
70 | 34 | Providing and Fixing of C.P. long bend 32mm i/d for cistern | NSR67 | 2 | Each |
71 | 35 | Providing and fixing of 550x 400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | NSR68 | 2 | each |
72 | 36 | Providing Drip Seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: | NSR69 | ||
73 | 36.1 | 100 mm | NSR70 | 2 | each |
74 | 36.2 | 75 mm | NSR71 | 2 | each |
75 | 37 | Providing and fixing of C.P. cup heavy duty as per approved make. | NSR72 | 7 | each |
76 | 38 | Providing and fixing of HCI P trap 4" dia complete in all respect. | NSR73 | 1 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail