}

Providing Public Health Services At Cyber Defence Directorate At Sco No 62 65 Sector 17 Chandigarh, Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Providing Public Health Services At Cyber Defence Directorate At Sco No 62 65 Sector 17 Chandigarh. Submission Date for this Tender is 03-06-2020. Healthcare Centers and Medical Practice Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

24406634
Providing Public Health Services At Cyber Defence Directorate At Sco No 62 65 Sector 17 Chandigarh
Open Tender
Indian
Chandigarh
Chandigarh
03-06-2020

Tender Details

Providing Public Health Services At Cyber Defence Directorate At Sco No 62 65 Sector 17 Chandigarh

Key Value

Document Fees
Refer document
EMD
INR 20200.0 /-
Tender Value
INR 10.06 Lakhs /-

BOQ Items

Name of Work: Providing Public Health Services at Cyber Defence Directorate at SCO No.62-65, Sector-17, Chandigarh.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. NSR
2 1.1 All kinds of soil. NSR1 1.51 cum
3 2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : NSR2
4 2.1 All kinds of soil NSR3
5 2.2 Pipes, cables etc, not exceeding 80 mm dia. NSR4 15 metre
6 2.3 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia NSR5 20 metre
7 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : NSR6
8 3.1 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). NSR7 1.35 cum
9 3.2 1:5:10 (1 cement : 5 fine sand ) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources )\r NSR8 1.62 cum
10 4 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). NSR9 0.28 cum
11 5 Centering and shuttering including strutting, propping etc. and removal of form for NSR10
12 5.1 Suspended floors, roofs, landings, balconies and access platform NSR11 2.97 sqm
13 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. NSR12
14 6.1 Cold twisted bars NSR13 30.8 kg
15 7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : NSR14
16 7.1 Cement mortar 1:4 (1 cement : 4 coarse sand) NSR15 0.3 cum
17 8 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. NSR16
18 8.1 Cement mortar 1:3 (1 cement :3 coarse sand) NSR17 9.48 sqm
19 9 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. NSR18
20 9.1 Granite of any colour and shade NSR19
21 9.2 Area of slab over 0.50 sqm NSR20 3.34 sqm
22 10 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. NSR21 5 each
23 10.1 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. NSR22 39 each
24 11 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : NSR23
25 11.1 250x16 mm NSR24 20 each
26 12 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : NSR25
27 12.1 250x10 mm NSR26 6 each
28 13 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : NSR27
29 13.1 100 mm NSR28 26 each
30 14 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: NSR29
31 14.1 Profile B NSR30
32 14.2 Fixing with adjustable lugs with split end tail to each jamb NSR31 70.71 metre
33 15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. NSR32
34 15.1 Size of Tile 600x600 mm NSR33 45 sqm
35 16 12 mm cement plaster finished with a floating coat of neat cement of mix : NSR34
36 16.1 1:3 (1 cement: 3 fine sand) NSR35 11.64 sqm
37 17 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : NSR36
38 17.1 New work (two or more coats) over and including water thinnable priming coat with cement primer NSR37 25 sqm
39 18 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : NSR38
40 18.1 Of area 3 sq. metres and below NSR39 10 each
41 19 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. NSR40 38.07 sqm
42 20 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: NSR41
43 20.1 Up to 150 mm diameter NSR42 10 metre
44 21 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : NSR43
45 21.1 Kitchen sink without drain board NSR44
46 21.2 610x510 mm bowl depth 200 mm NSR45 1 each
47 22 Providing and fixing white vitreous china water closet squatting pan (Indian type) : NSR46
48 22.1 Orissa pattern W.C. pan of size 580x440 mm NSR47 1 each
49 23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. NSR48
50 23.1 10 litre (full flush) capacity-coloured NSR49 1 each
51 24 Providing and fixing soil, waste and vent pipes : NSR50
52 24.1 100 mm dia NSR51
53 24.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 NSR52 30 metre
54 24.3 75 mm diameter : NSR53
55 24.4 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 NSR54 30 metre
56 25 Providing and fixing heel rest sanitary bend NSR55
57 25.1 100 mm dia NSR56
58 25.2 Sand cast iron S&S as per IS - 3989 NSR57 7 each
59 26 Providing and fixing single equal plain junction of required degree : NSR58
60 26.1 100x100x100 mm NSR59
61 26.2 Sand cast iron S&S as per IS - 3989 NSR60 4 each
62 26.3 75x75x75 mm NSR61
63 26.4 Sand cast iron S&S as per IS - 3989 NSR62 4 each
64 27 Providing and fixing terminal guard : NSR63
65 27.1 100 mm NSR64
66 27.2 Sand cast iron S&S as per IS - 3989 NSR65 2 each
67 27.3 75 mm NSR66
68 27.4 Sand cast iron S&S as per IS - 3989 NSR67 2 each
69 28 Providing and fixing collar : NSR68
70 28.1 100 mm NSR69
71 28.2 Sand cast iron S&S as per IS - 3989 NSR70 10 each
72 28.3 75 mm NSR71
73 28.4 Sand cast iron S&S as per IS - 3989 NSR72 8 each
74 29 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : NSR73
75 29.1 100 mm inlet and 75 mm outlet NSR74
76 29.2 Sand Cast Iron S&S as per IS- 1729 NSR75 15 each
77 30 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall NSR76
78 30.1 15 mm dia nominal bore NSR77 30 metre
79 30.2 20 mm dia nominal bore NSR78 60 metre
80 30.3 25 mm dia nominal bore NSR79 40 metre
81 30.4 32 mm dia nominal bore NSR80 10 metre
82 31 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : NSR81
83 31.1 15 mm dia nominal bore NSR82 10 metre
84 31.2 20 mm dia nominal bore NSR83 20 metre
85 32 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : NSR84
86 32.1 25 mm nominal bore NSR85 2 each
87 32.2 20 mm nominal bore NSR86 4 each
88 32.3 32 mm nominal bore. NSR87 1 each
89 33 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : NSR88
90 33.1 20 mm nominal bore NSR89 2 each
91 33.2 25 mm nominal bore NSR90 2 each
92 34 Providing and fixing uplasticised PVC connection pipe with brass unions : NSR91
93 34.1 30 cm length NSR92
94 34.2 15 mm nominal bore NSR93 30 each
95 35 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : NSR94
96 35.1 20 mm nominal bore NSR95 3 each
97 35.2 25 mm nominal bore NSR96 3 each
98 36 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. NSR97 4000 per litre
99 37 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. NSR98 10 each
100 38 Cutting holes up to 30x30 cm in walls including making good the same: NSR99
101 39 With common burnt clay F.P.S. (non modular) bricks NSR100 15 each
102 40 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: NSR101
103 40.1 100x100 mm size P type NSR102
104 40.2 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 NSR103 2 each
105 41 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: NSR104
106 41.1 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : NSR105
107 41.2 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 NSR106 1 each
108 42 Providing and fixing of Pressmatic urinal valve with auto closing system Jaquar Make Complete as per site NSR107 3 each
109 43 Providing and fixing of CP angular Stop cock with wall flange Jaquar Make , continental Complete as per site. NSR108 29 each
110 44 Providing and fixing of CP bib Cock with wall flange Jaquar Make , continental Complete as per site. NSR109 8 each
111 45 Providing and fixing of CP Long body bib cockwith wall flange Jaquar Make , continental Complete as per site. NSR110 2 each
112 46 Providing and fixing of 5mm thick looking glass with PVC frame beading including cost of screws, rawal plugs complete as per site. NSR111 5.78 Sqm.
113 47 Providing and fixing of Bottle trap 32mm size 300 mm & 190mm long connection pipe and wall flange make viking or equivalent complete as per site. NSR112 10 each
114 48 Providing and fixing of wll hung EWC make Cera Campebell including seat cover, rag bolts complete. NSR113 7 each
115 49 Providing and fixing CP Metropole Flush dual flow 32mm (Concealed body with exposed Shut off provision) and round flnage having 3.0/6.0 Ltr. per flushing make Jaquar as per CAT No.FLV-1085 complete in all respects. \n NSR114 7 each
116 50 Providing and fixing half stall urinal including cost of CP waste , CP spreader complete in all respect. NSR115 3 each
117 51 Providing and fixing Hand Shower (Health faucet) (ABS Body) with 1 Meter long easy flex tube in Chrome Finish & wall Hook complete in all respect. NSR116 7 each
118 52 Providing and fixing of 32mm dia GI waste pipe concealed upto 3 feet length for bottle trap including chase cutting and making good the walls complete as per site. NSR117 7 each
119 53 Providing and fixing of 40mm dia GI waste pipe concealed upto 3 feet length for bottle trap including chase cutting and making good the walls complete as per site. NSR118 3 each
120 54 Providing and fixing of HCI P-Trap NSR119 1 each
121 55 Providing and fixing Oval shaped counter top wash basin size 570x450mm make Cera COMET including cost of Jaquar make Pressmatic Pillar Tap, CP waste complete as per site NSR120 6 each
122 56 Providing and fixing of CP soap dish continental range Make Jaquar complete NSR121 6 each
123 57 Providing and fixing CP toilet paper roll hander make Jaquar Continental Complete NSR122 7 each
124 58 Providing and fixing of CP hand Toilet rail 600mm long make Jaquar Continental Complete NSR123 5 each
125 59 Providing and fixing of GI elbow size 3" x 1 1/4" of approved make complete in all respect. NSR124 2 each
126 60 Providing and fixing of Factory made 30mm thick PVC flush door shutter made of Prelaminate Decorative both side wood granite funish 5mm thcik Rigid PVC foam sheet, Frame of Door made out of 19x19mm MS square tube of 19 quage and inside 20 mm thick PVC follow profile sheet filed in the tube frame, 5mm rigid PVC foam sheet fixed and pressed mechnically of the both side of frame with approved quality of adhesive. All the edges of door shutter shall have 5mm thick rigid PVC foam sheet lipping in the double layer complete as per Manufacturer's specification and direction of EIC. NSR125 23.41 Sqm.
127 61 Dismantling glazed wall tiles/ floor tiles including plaster and disposal of Malba away from site complete in all respect. NSR126 119.21 Sqm.
128 62 Providing and fixing Ist quality ceramic/ virtified glazed wall tiles (300x600mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, (Colour & Design as approved by Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. NSR127 199 Sqm.
129 63 Providing and fixing of Urinal partitions curved/ rectangular shaped with frosted glass complete in all respect. NSR128 2 each
130 64 Providing and fixing of monoblock motor 1 HP complete in all respect. NSR129 1 each
131 65 Providing Drip Seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: NSR130
132 65.1 100 mm NSR131 15 each
133 65.2 75 mm NSR132 15 each
134 66 Supply, Hoisting and fixing MS sheet 3.15mm thick with the help of welding on existing MS girder including primer tow coats of painting complete in all respect. NSR133 150 kg
135 67 Providing and fixing MS girder of size 150x75 mm including cutting, priming and two coats of painting complete in all respect. NSR134 180 kg
136 68 Providing and fixing of C.P. cup heavy duty as per approved make. NSR135 8 each
137 69 Providing and fixing of soap dispener complete in all resepct. NSR136 5 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail