}

Upgradation Improvement Of Electromechanical Components And Civil Works At Existing 10 Mld Stp At Bhagwati Nagar Jammu Including Operation Maintenance For 5 Years After Successful Completion Of 6 Months Free Trial Run Contract No Sdj W 03 2020-21, JAMMU-Jammu And Kashmir

Housing And Urban Development Corporation Limited-HUDCO has published Upgradation Improvement Of Electromechanical Components And Civil Works At Existing 10 Mld Stp At Bhagwati Nagar Jammu Including Operation Maintenance For 5 Years After Successful Completion Of 6 Months Free Trial Run Contract No Sdj W 03 2020-21. Submission Date for this Tender is 16-06-2020. Electromechanical Work Tenders in JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

24368173
Corrigendum : Upgradation Improvement Of Electromechanical Components And Civil Works At Existing 10 Mld Stp At Bhagwati Nagar Jammu Including Operation Maintenance For 5 Years After Successful Completion Of 6 Months Free Trial Run Contract No Sdj W 03 2020-21
Open Tender
Indian
Jammu And Kashmir
JAMMU
16-06-2020

Tender Details

Upgradation Improvement Of Electromechanical Components And Civil Works At Existing 10 Mld Stp At Bhagwati Nagar Jammu Including Operation Maintenance For 5 Years After Successful Completion Of 6 Months Free Trial Run Contract No Sdj W 03 2020-21

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 29-May-2020 CORRIGENDUM Other 09-06-2020
2 08-Jun-2020 DATESEXTN Date 16-06-2020

Key Value

Document Fees
INR 3000 /-
EMD
INR 640000.0 /-
Tender Value
INR 3.20 Crore /-

BOQ Items

Name of Work: Upgradation / Improvement of Electro-Mechanical components and Civil works at Existing 10 MLD Sewerage Treatment Plant at Talab Tillo Gole Jammu including O&M for 5 yrs after successful completion of 6 months free trial run
Sl. No. Item Description Item Code / Make Quantity Units
1 1 PART A:
2 1.01 Earth work in excavation by mechanical means ( hydraulic excavation ) over areas (exceeding 30 cm & upto 1.5 mtr.in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lift up to 1.50 mt. , disposed earth to be levelled and neatly dressed,in all kinds of soil 476 Cum
3 2 Eartwork in excavation by manual means over area(exceeding 30 cm and upto 1.5m in depth,1.5m in width as well as 10 Sqm on Plan)Including disposal of excavated earth upto 1m from cutting edge,disposed earth to be levelled and neatly dressed:-All kinds of soil. 1006 Cum
4 3 Surface dressing of ground including removing vegitation and in-equalities not exceeding 15 cm deep and disposal of rubbish,lead up to 50m and lift upto 1.5m in all kinds of soils. 26026 100 sqm
5 4 Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:4:8 [1cement : 4coarse : 8 graded crushed stone aggregate 40mm nominal size]. 66 Cum
6 5 Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:2:4 [1cement : 2coarse sand : 4 graded crushed stone aggregate 20mm nominal size]. 637.3 Cum
7 6 Providing, and Laying in position, specified grade of reinforced cement concrete excluding the cost of centring , shuttering, finishing & reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size.) 15 Cum
8 7 Reinforcement for R.C.C work including straightening, cutting, bending placing in position and binding all complete.Thermo-Mechanically Treated bars. 1500 Kg
9 8 Supplying at site Angle iron posts & struts of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia etc. & fixing complete. 3625 Kg
10 9 Providing and fixing G.I. Chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts ,bolts and washers as required complete as per directions of engineer-in-charge. 594 Sqm
11 10 Cement Plaster(in coarse Sand)
12 11 12mm thick. Cement plaster of mix 1:4 ( 1 cement : 4 coarse sand) & curing complete 1031 Sqm
13 12 Centring and shuttering including strutting, propping etc. & removal of form for :-
14 12.01 Foundation,footings,bases of coloumnds etc and mass concrete. 80 Sqm
15 12.02 Walls(any thickness)incl attached pilasters,buttresses,plinth and string courses etc. 2974.4 Sqm
16 12.03 Edges of slabs and breaks in floors and walls under 20 cm wide. 9.6 Rm
17 13 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. Layers not exceeding 20 cm in depth. Consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 1141 Cum
18 14 Earth work in rough , banking excavated earth in layers not exceeding 20cm in depth, breaking clouds watering,rolling each layer with half tonne roller or wooden or steal rammers,and rolling every third and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads ,flood banks,marginal banksand guide banks or filling up ground depressions lead upto 50mtr and lift upto 1.5mtr.in All kinds of soil. 607.5 Cum
19 15 Steel work welded in built up section / framed work including cutting , hoisting, fixing in position & applying a primer coat of approved steel primer using structural steel etc as required :-In gratings frames guard bar, ladders, railing , Brackets gates & similar works. 300 Kg
20 16 Preparation of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 meters. 1680 Sqm
21 17 Laying water bound macadam with specified stone aggregate stone screening and binding materials including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate screening, kankar, moorum and red bajari etc to be made separately) base course with 63 mm to 45 mm size including stone screenings 13.2 mm size. 294 Cum
22 18 Laying water bound macadam with specified stone aggregate stone screening and binding materials including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate screening, kankar, moorum and red bajari etc to be made separately) base course with 53 mm to 22.4 mm size including stone screenings 11.2 mm size. 126 Cum
23 19 Supplying and stacking of graded stone aggregate at site of size range (excluding carriages) 63 mm to 45 mm Quarry 294 Cum
24 20 Supplying and stacking of graded stone aggregate at site of size range (excluding carriages) 53 mm to 22.4 mm Quarry 126 Cum
25 21 Supplying and stacking of stone screenings / chippings at site excluding carriage
26 21.01 13.2 mm nominal size (Type A) 67 cum
27 21.02 11.2 mm nominal size (Type B) 19.15 cum
28 22 Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. surface @ 0.75 Kg / Sqm. 1500 Sqm
29 23 2cm premix carpet surfacing with 1.8 cu.m and 0.90 cu.m of stone chippings of 13.2 mm size and 11.2 size respectively per 100 sq.m and 52 kg and 56 kg of hot bitumen per cu.m. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid separately) with refinery modified bitumen CRMB 55 conforming to IRC : SP : 53-1999) 1500 Sqm
30 24 Providing & Laying seal coat of premixed fine aggregate (passing 2:36 mm and retained on 180 micron sieve) with bitumen using 128 Kg of bitumen of grade 80/100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with road all complete. 1500 Sqm
31 25 Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)
32 25.01 25 mm dia G.I.pipe Medium 950 RM
33 25.02 50 mm dia G.I.pipe Medium 800 RM
34 25.03 80 mm dia G.I.pipe Medium 300 RM
35 26 Upgradation/renovation of 3no. old bathrooms by w/o water supply /sanitary fittings including supply and fixing of G.I,C.I,PVC.complete job. 1 Job
36 27 Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS License No.with cover and suitable locking arrangement and making nessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank (Sintex,Electroplast,Lotus or equivalent having valid ISI license) 3000 per litre capacity
37 28 Providing wood work in frames of doors,. windows,clearstory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately) Sal wood. 0.62 Cum
38 29 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq.metres and under including cutting the patchin proper shape rankingh out joints and preparing and plastering the surface of the walls complete including disposalof rubbish to the dumping ground withen 50 metres lead;with cement mortar 1:4 (1cement :4 coarse sand) 313.37 Sqm
39 30 Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 3398 Sqm
40 31 Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth. 1285 Sqm
41 32 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer)with warter absorption less than 0.08%and conforming to is:15622 of approved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1cement :4 coarse sand ) including grouting the joints with white cement and matching pigments etc.complete. size of tile 60x60 cm 137 Sqm
42 33 Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc .complete on 20 mm thick bed of cement mortar 1: 4 (1 cement : 4 coarse sand ) Light shade useing white cement 48.84 Sqm
43 34 Providing and fixing glazed shutters for doors , windows , clearstory windows using 10kg/sqm. (4mm thick ) float glass panes including ISI marked M.S. pressed butt hinges bright finished or requried size with nessary screws Second class deodar wood 16.6 Sqm
44 35 Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors , windows , clearstory windows with hinges and nessary screws Second class deodar wood 22 Sqm
45 36 Providing and fixing panelled and glazed shutters for doors ,windows and clearstory windows including ISI marked M.S P shutters using galvanised M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors , windows , clearstory windows with hinges and nessary screws First class deodar wood 8.5 Sqm
46 37 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors ,windows and clearstory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ) panelling for panelled or panelled and glazed shutters 25mmto40mm thick First class deodar wood 4.46 Sqm
47 38 Repair to old wood work.
48 38.01 Carpenter 23 No
49 38.02 Labour 23 No
50 39 Applying one coat of water thinable cement primer of approvedbrand and manufacture on wall surface:water thinable cement primer. 1285 Sqm
51 40 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new works. 1285 Sqm
52 41 Renewing glass panes with wooden fillets wherever necessary; Glass panes weighing 10 kg / Sqm 12 Sqm
53 42 Melamine polishing on wood work (one or more coats) 32 Sqm
54 43 Applying priming coat: with ready mixed pink or grey primerof approved brand and manufacture on wood work(hard and soft wood) 95.54 Sqm
55 44 Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shadesto give an even shade
56 44.01 New work (two or more coats) 28.7 cum
57 44.02 Old work (two or more coats) 66.9 cum
58 45 Painting with oil type wood preservative of approved brand and manufacture. 66.9 Sqm
59 46 Repair to sanitary fitting 2 job
60 47 Repair to electiic fitting 2 job
61 48 Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: Using M.S. angles 40x40x6 mmfor diagonal braces 14.5 Sqm
62 49 Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors , windows , clearstory windows with hinges and nessary screws Second class deodar wood 2.52 Sqm
63 50 Providing and applyingwhite cement based puttyof averagethickness 1 mm,of approved brand and manufacture,over the plastered wall surface to prepare the surface even and smooth complete 567 Sqm
64 51 Providing and fixing fly proof wire gauze to windows, clearstory windows &doors with M.S. flat 15x3mmand nuts & bolts complete. Galvanised M.S. wire gauzewith 0.63mmdiawire and 1.4mmaperatureon on both sides 26.47 Sqm
65 52 Finishing walls with water proofing cement paint of requred shade: Old work (one or more coats on applied @2.20kg/10sqm over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. 2834 Sqm
66 53 Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade
67 53.01 Old work (two or more coats) 138 Sqm
68 54 Applying priming coat: with ready mixed zinc chromate primer of approved brand and manufacture on steel work(second coat) 138 Sqm
69 55 Lettering with black Japan paint of approved brand and manufacture. 3300 cm
70 56 cleaning of floors and surroundings and site clearence 1 job
71 57 Clearence of sewage sump tank of size 18.6x12.6x10.5m screen chamber manhole with screen chamber,sluge sump of dia 4.00m , 10 no Drying beds of size 20.00x15.00m, 6 no polishing ponds of size 48x29x2.5m,out ffall chennel ,pre treatment unit & two no. reactor units of size 18mx24mx5.6m along with replacement of its necessary fittings viz HDPE/PVC pipes/ valves /gas domes incl. all specials all interior net work of differnt dia pipes filled with sewage ,sluge ,filth etc including dewatering and disposalas as per the instructions of Engineer in charge to give the desired result as per specfications /design parameters complete job in all respects. 1 job
72 58 Supplying of plants of different varieties both ornamental and fruit plants as per directions of engineers in charge including digging holes of required size ,filling the same after placing of plant ,with earth and manure in the ratio of 2:1 (two earth : one manure) &watering etc complete job. 2000 job
73 59 Dismantling tile work in floors & roof laid in cement motar including stacking material within 50 meter lead . For thickness of tiles above 25 mm & upto 40 mm 507 Sqm
74 60 Dismantling doors, windows and clearstory windows (steel or wood )shutters including chowkhats,architrave holdfasts etc complete and stacking within 501 metres lead .
75 60.01 of area beyond 3 sq. metres . 4 NO
76 60.02 of area 3 sq. metres and below 10 NO
77 61 Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with dash fasrtener of required dia. and size including nessary filling up of gapes at junctions i.e, at top, bottom and sides with required EPDM rubber/neopriene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechnically wherever required including cleat angle,Aluminium snap beading for glazing / panelling, C. P. brass /stainless steal screws,all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling to be paid for separately )
78 61.01 Powder coated aluminium ( minimum thicknessof powder coated 50 microns) 535 Kg
79 62 For shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (including all types of fixtures all complete)
80 62.01 Powder coated aluminium ( minimum thicknessof powder coated 50 microns) 767 Kg
81 63 Providing and fixing 12mm thick Prelaminated particle board flate pressed three layer or graded wood particle board ( conforming to IS : 12823 Grade-I type ) in panelling fixed in alumininum doors, windows shutters and partitions frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and the directions of Engineer-in-Chargecomplete
82 63.01 Pre-laminated particle board with decorative laminated on both sides. 13 Sqm
83 64 Providing and fixing glazing in alumininum doors windows, ventilatorsshutters and partitions etc, with EPDM rubber / neoprene gasket etc. complete as per architectural drawings and the directions of Engineer-in-Chargecomplete ( Cost of alumininum snap beading shall be paid in basic item)
84 64.01 With float glass panes of 5.50 mm thickness (weight not less than 13.5 kg / sqm. 28 Sqm
85 65 providing and fixing fly proof wire gauze to windows, clearstory windows &doors with M.S. flat 15x3mmand nuts & bolts complete.Stainless steel ( grade 304) wire gauze of 0.50mm dia wire and 1.40mm apertureon both sides. 8 Sqm
86 66 Carriage of Earth 2km by M.T. 607.5 Cum
87 67 Carriage of Material
88 67.01 Sand & Bajree 10 km by M.T 1104.97 Cum
89 67.02 Carriage of Material 5 km by M.T 420 Cum
90 67.03 PART B:
91 68 Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr. in width as well as 10sqm on plan) including disposal of excavated earth, neatly dressed. All kinds of soil 150 Cum
92 69 Hiring 0f Hydraulic excavator/cum (incl.POL) operating maintenance, driver and helper all complete 300 Hour
93 70 Brick work with common burnt clay F.P.S (non- modualar) brick of class designationin 75 in foundation and plinth in plinth in 1:4 extra for brick workin superstructure above plinth floor v , brick work in square or rectangular pillars, curved on plan upto a mean radius not exceeding 6 m. 20 Cum
94 71 Dry stone pitching (any thickness)excluding cost of stones.
95 72 On Horizontal 466 Cum
96 73 On Slope 74 Cum
97 74 Grouting of stone pitching using M-10 nominal mix concrete (mix.size of aggregates, 20mm nominal)@ 3.65 cum per 100 sq m on horizontal/side slopes, complete including curing. Crushed 2964 Sqm
98 75 Providing and fixing upto floor five level precast cement concrete string or lacing courses,copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 cement :3 coarse sand), cost of required centring, shuttering complete 1:2:4 mix with stone agg.20mm n/size. (Ornamental concrete) 20 Cum
99 76 Reinforced cement concrete work in walls (any thicking), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts of centring, shuttering, finishing and reinforcement 1:1.5:3 mix with stone agg. 20mm n/size.( Ornamental RCC) 10 Cum
100 77 Reinforcement for R.C.C work including staightening, cutting, bending, placing in position and binding all complete. (T.M.T Size) 800 Kg
101 78 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. 1200 Cum
102 79 Providing chain link fabric fancing mesh of 50x50 made of G.I. wire of dia 4mm, PVC coated to outer dia 5mm 150 Sqm
103 80 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l limpet washers or with G.l limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of steets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 1.60mm thick with zinc coating not lessthan 350gm/sqm 60 Sqm
104 81 providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying a priming coat of approved steel primer. 800 Kg
105 82 Providing and fixing M.S. round holding down bolts, nuts and washer plates complete. 20 Kg
106 83 Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment) 400 Cum
107 84 Supplying and stacking at site dump manure from badi or other approved source including carriage upto 1km (manire measured in stacks will be reduced by 8% for payment) 230 Cum
108 85 Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer incharge (cost of sludge, dump manure or/and good earth to be paid seperately) 630 Cum
109 86 Mixing eaeth and sludge or manure in proportion specified or directed by officer in charge. 630 Cum
110 87 Grassing with sleection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass froms a thick lawn free from weeds & fit for mowing including suppling of good earth if needed (the good earth shall be paid seperately) With grass turf 5000 100sqm
111 88 Edging with bricks laid dry length wise including excavation, refilling, consoldation with hand packing and speading neatly surplus earth within a lead of 50m. Common bumt clay F.P.S.(non modular bricks of 7.5 designation. 300 M
112 89 preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer dressing etc. lead upto 50 meter and lift upto 1.5 m complete as per direction of officer- in-charge 40 each
113 90 supply of plants of different varaties both ornamental and fruit plants Herbal / Bolonical plants including digging holes of reqd. size / depth filling the same after placing of plant with earth and manure in the ratio of 2:1 and watering etc. complete Job. watering / maintenance for 30 dyas (High Bread)
114 91 Fruit Plants of 2 1/2 in height (High bread) 6000 each
115 92 Herbal and Botenical Plants 2 1/2 height 2000 each
116 93 Supply wood work in fromes pertaing caling sarn in different size shop as the requirement.
117 94 Second class deodar wood in scantling 1 Cum
118 95 Second class kail wood in planks 1.5 Cum
119 96 Sal wood in scantling 1 Cum
120 97 Budloo/Fir wood/ Safeda 2 Cum
121 98 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles,including rubbing cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade using ordinary cement. 300 Sqm
122 99 supply of Skilled labour of different categroies with fullexperance do the ornamental works.
123 100 Mason for ornamental works 35 each
124 101 Carpenter for wood works 30 each
125 102 Painter 30 each
126 103 Skilled labour 60 each
127 104 Gardener 60 each
128 105 Plumber 20 each
129 106 Carriage of earth by machnical transport 2km
130 107 Supply of stones 400 Cum
131 108 Carriage of Material 10 km by machnical transport
132 109 sand + ston agg. 300 Cum
133 110 stones 400 Cum
134 111 Carriage of Brick 15 kmby MT 11000 1000nos
135 112 Supply of walding set along with welder helpur complete job 20 day
136 113 Kota stone slab flooring over (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement :4 coarse sand) 45 Sqm
137 113.01 Part C:
138 114 Sewage Transfer Pumps
139 115 Providing & Installation of 1 No new Sewage Submersible pump-motor set of make Kishore/ KSB/Aqua with Discharge of 2.5 MLD of 17 mtr Head, complete with Cable, Switch Boards, Starter etc. Complete Job including cost of material and labour charges.\n\n 1 Job
140 116 Complete overhauling / recapitalisation of existing 1 No 12.5 MLD Sewage Submersible pump-motor units with Cables, starter etc, Complete Job including cost of material and labour charges. 1 Job
141 117 Providing & Installation of 2 Nos New Sewage Submersible pump-motor sets of make Kishore/ KSB/Aqua with Discharge of 5 MLD & 17 mtr Head, complete with Cable, Switch Boards, Starter etc. in place of existing damaged pumps. Complete Job including cost of material and labour charges. 2 Job
142 118 Sewage Collection Tank of 45 MLD capacity
143 119 Complete, repairs or replacement of pump guides and railing etc. Complete Job including cost of material and labour charges. 1 Job
144 120 Providing and Installation of M.S Gate at entry point of 45 MLD Sump Tank near the downward staircase.Complete Job including cost of material and labour charges. 1 Job
145 121 Replacement/ Improvement of all Inlet gates of sump tank and screening chamber. Along with proper alignment to make them functional.Complete Job including cost of material and labour charges. 1 Job
146 122 Providing and Installation of Chain Pulley Block of 5 Ton capacity of Hercules/Reva make complete unit with all Accessories. Complete Job including cost of material and labour charges. 1 Job
147 123 Fabrication and fitting of M.S. covers in the form of grating or chequered plates to cover the open areas of sump, sump roof area and cable ducts.Complete Job including cost of material and labour charges 1 Job
148 124 Providing & Installation of UltrasonicFlow Meter of make E&H for 300mm dia main delivery pipe at the sump. Complete Job including cost of material and labour charges. 1 Job
149 125 Providing and Installation of pressure gauge of ISI make. Complete Job including cost of material and labour charges. 6 Job
150 126 Mechanical Screen Bar at Sump Tank
151 127 Replacement of existing damaged Screen Bar and accessories complete, including panel, cables and to make it functional. Complete Job including cost of material and labour charges. 1 Job
152 128 Electrical Works
153 129 Replacement of existing damaged L.T Control panels with L.T panels of ABB/L&T/Simens for 1 No. 2.5 MLD of 17 mtr Head,1 No 12.5 MLD Sewage Submersible pump-motor, 2 Nos New Sewage Submersible pump-motor sets and 2 No. Sludge Motors including up-gradation of panel casing, panel board bus bars, junction system, cables, replacement of switches and starters. Complete Job for six panels including cost of material and labour charges 6 Job
154 130 Replacement of 300 mm2 3½ core Aluminium Armoured Cable 25 mtr. of make Havells/Polycab/Gloaster from transformer yard to the panel room.Complete Job including cost of material and labour charges. 1 Job
155 131 Providing and Installation of 14 No LED flood lights of 50 watt each of make Havells/Syska/Phillips complete with cables and other fittings around the Collection Sump, main building, reactor, sludge sump and drying beds. Location to be identified by Engineer in-charge, Complete Job including cost of material and labour charges. 1 Job
156 132 Providing and laying of new rubber insulation sheets in the panel room of standard make / size and to cover the complete floor of the panel room.Complete Job including cost of material and labour charges. 1 Job
157 133 Construction of GI Sheets Sheds with
158 134 Laying of GI shed on the sump Tank of length 35 feet, width 12 feet and height 15 feet for the Protection of Panels on sump tanks. The shed should be made out of ISI make: 20 gauge GI sheets, MS Channels, MS Angles, MS Pipes, Hooks etc. The Bidder shall submit the drawings for approval by the department before the execution of job. 1 Job
159 135 Laying of GI Shed on the top of 9 underground valves chambers of Length 9 feet, Width 9 feet and height 10 feet, adjoining the reactor for the protection of valves. Complete Job including cost of material and labour charges. The shed should be made out of ISI make: 20 gauge GI sheets, MS Channels, MS Angles, MS Pipes, Hooks etc. The Bidder shall submit the drawings for approval by the department before the execution of job 1 Job
160 136 Valves
161 137 Providing & fitting of Sluice Value of 300 mm dia. Complete Job including cost of material and labour charges. 2 Job
162 138 Providing & fitting of Sluice Value of 200 mm dia. Complete Job including cost of material and labour charges. 5 Job
163 139 Providing & fitting of Sluice Value of 150 mm dia. Complete Job including cost of material and labour charges. 5 Job
164 140 Sludge Sump Tank
165 141 Providing & Installation of Submersible Sludge pump-motor set of Kishor/ KSB/Aquamake with discharge of 1.7 MLD and 23 mtr Head, complete with cable, starter, switch etc. Complete Job including cost of material and labour charges 1 Job
166 142 Repair to the Gantry of sludge sump & P/F of Chain Pulley Block 5 Ton capacity of make Hercules/Reva complete unit with all accessories. Complete Job including cost of material and labour charges 1 Job
167 143 Automatic Voltage Control Stabilizer
168 144 Providing &Installation, testing and commissioning of 400 KVA Servo Controlled Automatic Voltage Stabilizer (Make Electric Field, Jai Maa, Nachiketa, Servokon, Power Control) , 3 Phase, oil cooled (transformer oil to be the cooling medium conforming to IS-335 with latest amendments) conforming to IS-8447-1989, IS-9815 I & II of 1994 amended up to date. The stabilizer shall be copper wounded in sheet steel case duly painted with providing & first filling of transformer oil. The stabilizer should be fitted with wheel roller for easy portability with the technical specifications as given hereunder:
169 145 The voltage stabilizer shall be suitable for the following configuration:
170 146 a)       Input Voltage: 260-460 Volts
171 147 b)       Output Voltage: 415 ± 1%
172 148 c)       Frequency: 50 Hz ± 3% A.C. supply
173 149 d)      The rate of correction of voltage shall not be more than 8-20 V/sec between phase and neutral.
174 150 e)       The No-Load current shall not be more than the 5% of the rated output current.
175 151 Providing & Installation of clear water Submersible Pump-motor set along with the standby set of Kirloskar/ KSB make or equivalent having discharge of 5000 GPH and 50mtr Head along with cables & allied accessories. Complete Job including cost of material and labour charges. 1 Job
176 152 Painting
177 153 Painting of complete Electro-Mechanical equipment’s, pipes, valves, railings, gates, gratings, shutters etc using superior quality primer and paints. Complete Job including cost of material and labour charges. 1 Job
178 153.01 Part D:
179 154 Operation & Maintenance
180 155 Complete Operation & Maintenance rates during the Ist Year. 1 Job
181 156 Complete Operation & Maintenance rates during the 2nd Year. 1 Job
182 157 Complete Operation & Maintenance rates during the 3rd Year. 1 Job
183 158 Complete Operation & Maintenance rates during the 4th Year 1 Job
184 159 Complete Operation & Maintenance rates during the 5th Year 1 Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail