}

Comprehensive Maintenance Works At Abe Park And Dad Quarters Under Age Br Ii Of Ge Nd Visakhapatnam, Visakhapatnam-Andhra Pradesh

Military Engineer Services-MES has published Comprehensive Maintenance Works At Abe Park And Dad Quarters Under Age Br Ii Of Ge Nd Visakhapatnam. Submission Date for this Tender is 09-06-2020. Building Work Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

24357225
Comprehensive Maintenance Works At Abe Park And Dad Quarters Under Age Br Ii Of Ge Nd Visakhapatnam
Open Tender
Indian
Andhra Pradesh
Visakhapatnam
09-06-2020

Tender Details

Comprehensive Maintenance Works At Abe Park And Dad Quarters Under Age Br Ii Of Ge Nd Visakhapatnam

Key Value

Document Fees
INR 500 /-
EMD
INR 94000.0 /-
Tender Value
INR 47 Lakhs /-

BOQ Items

Name of Work: COMPREHENSIVE MAINTENANCE WORKS AT ABE PARK AND DAD QUARTERS UNDER AGE B/R - II OF GE [ND] VISAKHAPATNAM
Sl. No. Item Description Item Code / Make Quantity Units
1 1 The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-\n[i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.\n[ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.\n[iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.\n[iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work).
2 2 M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. 400 SqM
3 3 M & L Vitrified Ceramic tiles 8 to 10mm thick (square/ rectangular) polished, coloured (double charged) area of each tile not exceeding 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. 100 SqM
4 4 M & L coloured Glazed ceramic tiles of size 450x350x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. 300 SqM
5 5 S & F 18 to 20mm thick Granite (of any type) work\n(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling existing tiles complete all as specified and directed. 20 SqM
6 6 S & F 18 to 20mm thick Granite (of any type) work\n(table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using\nmarble dust with admixture of pigment to match with shade of granite including dismantling existing tiles complete all as specified and directed. 15 SqM
7 7 M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed. 10 CuM
8 8 M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. 50 SqM
9 9 M & L for Repairs to damaged RCC surfaces of chajjas, soffits of slabs, beams, columns, cantilever slabs, beams, columns, fins, stair cases, railing, etc at any height and in any position including cutting / chipping the spalling concrete surfaces and applying epoxy treatment for bonding new or old concrete surfaces and providing welded steel wire fabric mesh 75x25mm of weight not less than 4.0 Kg/Sqm on prepared surface with suitable pins/clamps/ welding to the existing reinforcement and applying polymer modified cementous coating on concrete surfaces prepared for guniting and finished with 40mm thick (25mm thick average) pressure Guniting in Cement mortar 1:3, applied by pressure hoses finishing the plastered surfaces with two coats of cement base paint over a coat of primer complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for work at height and location including cost of scaffolding] 40 SqM
10 10 Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed. 455 SqM
11 11 M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing compound @ 2% by weight of cement, finished even and smooth with out using extra cement complete all as directed. 255 SqM
12 12 M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. 180 SqM
13 13 M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even and smooth with out using extra cement complete all as directed. 20 SqM
14 14 M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 255 SqM
15 15 M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directetd. 20 SqM
16 16 M & L for 50mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in floorings finished even and smooth with out using extra cement including demolition of existing concrete complete all as specified and directed. 150 SqM
17 17 M & L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete including demolition of old concrete complete all as specified. 5 CuM
18 18 M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in road/path, hard standing, etc with and including suitable form work laid to slope in panels including demolition of existing concrete complete all as specified and directed. 50 SqM
19 19 M & L for coloured chequered cement concrete tiles of size 25cm x 25cm x 22 to 25mm thick with mixture of white & grey cement, set jointed and pointed with grey cement and no pigments in neat cement slurry as in floors and pointed with white cement laid over and including 15mm thick screed bed in CM 1:6 including dismantling of existing tiles complete all as specified and directed. [The design, colour and pattern shall be as approved by the GE] 50 SqM
20 20 M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as directed. 2500 SqM
21 21 M & L for preparation of old decorated surfaces of walls by brooming down, brushing and applying one coat of white wash complete all as spcified and directed. 700 SqM
22 22 Complete removal of existing treatment on walls, preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. 1800 SqM
23 23 M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of distemper oil emulsion complete all as directed. 2500 SqM
24 24 M & L for preparation of old painted surfaces of walls of any description, not otherwise described, over 10cm in width or girth and applying one coat of exterior weather proof (100% Acrylic emulsion) paint complete all as specifed and directed. 8000 SqM
25 25 M & L for complete removal of existing treatment on external wall surfaces and preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of weather proof (100% Acrylic emulsion) paint exterior grade over a coat of primer complete all as specified and directed. 1200 SqM
26 26 M & L for preparation of old decorated surfaces of ceilings by brooming down, brushing and applying one coat of white wash complete all as spcified and directed. 600 SqM
27 27 M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. 550 SqM
28 28 M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. 650 SqM
29 29 M & L for writing letters or figures (Block, Roman, Italic and Indian) not exc 30cm high on wall surfaces boldly and solidly without showing signs of brush marks complete all as specified and directed by the Engineer-in-Charge. 50 Per 10 Nos Per CM height
30 30 Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. 30 EACH
31 31 Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. 20 EACH
32 32 Taking down shutters not exc 1.0 Sqm each complete all as specified and directed. 15 LEAF
33 33 Taking down shutters area exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and directed. 20 LEAF
34 34 M & L for 25mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with nails in any position as in shelves of builtin cupboards including dismantling old boarding complete all as directed. 20 SqM
35 35 M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 1 CuM
36 36 M & L for 2nd class hardwood 35mm thick, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as directed. 50 SqM
37 37 M & L for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge, etc. complete all as directed. 50 SqM
38 38 M & L for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge, etc. complete all as directed. 10 SqM
39 39 S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specified complete all as directed. 70 RM
40 40 S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as specified and as directed. 40 SqM
41 41 S & F Factory made PVC Ventilator made out of multi chamber PVC hollow section DWUF 405 [40x46mm] with 3mm pin headed glass fixed to the lower section using extruded PVC section of 9 X 19.5mm size OL19 with EPDM gasket [SPL 003] for both PVC sections, ventilator's centre mullion shall be made up of multi chamber hollow PVC section DWUF-406 [63.5mmX40mm] with EPDM gasket GL-19 and fixed to the 3 sides of DWUF-405 and DWUF 406 [63.5X40mm] above the centre mullion, Glass panels with aluminium lower set shall be fixed to the frame DWUF-405 on the top of the ventilator for the glass, fixed with 4mm thick pin headed glass louvers and covered with 0.36mm dia and 1.4mm aperture stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars complete all as specified and directed by the Engineer-in-Charge 10 SqM
42 42 M & L for Aluminium powder coated (Thickness of powder coating 50 micron) Deco grills flat matt design of Model DG-104 (10mm thick) chequered mesh 75mmx75mm riveted with rivets and fixed with and including suitable aluminium 'U' channel with necessary fixing arrangements including dismantling existing grills complete all as directed. 80 SqM
43 43 M & L for Aluminium powder coated (Thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as directed. 140 KG
44 44 M & L for Anodised aluminium powder coated door shutters, (minimum thickness of powder coating 50micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws complete all as directed. [Note: Galzing shall be measured and paid seperately] 70 SqM
45 45 M & L for Anodised aluminium powder coated (Thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed. [Note: Galzing shall be measured and paid seperately] 15 SqM
46 46 S & F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane fixed in any position complete all as specified and directed. 50 SqM
47 47 S & F Solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions complete all as directed. 50 SqM
48 48 M & L for 19mm thick Block boards, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work including dismantling old boarding complete all as directed. 20 SqM
49 49 S & F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed. 20 SqM
50 50 S & F in repairs Hasp and staple, 100mm size safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. 20 EACH
51 51 S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 100mm complete all as specified and directed. 40 EACH
52 52 S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 75mm complete all as specified and directed. 60 EACH
53 53 S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. 45 EACH
54 54 S & F extruded aluminium alloy handles fabricated type anodised of size 100mm complete all as directed. 45 EACH
55 55 S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as directed. 60 EACH
56 56 S & F aluminium anodised barrel tower bolt of size 100mm long of extruded section complete all as directed. 80 EACH
57 57 S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. 15 EACH
58 58 S & F mild steel work as in Bands, straps, hold fasts, stiffners for fencing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 20 KG
59 59 M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. 75 SqM
60 60 M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling existing structural steel work complete all as specified and directed. 250 KG
61 61 M & L for rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc incluing one shop coat of zinc chrome primer including dismantling existing structural steel work complete all as specified and directed.\n 50 KG
62 62 M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 40 SqM
63 63 S & F 110mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. 220 RM
64 64 S & F 75mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. 140 RM
65 65 M & L for 110mm bore PVC (SWR) bends any radius with oval access door complete all as specified. 20 EACH
66 66 M & L for 75mm bore PVC (SWR) bends any radius with oval access door complete all as specified. 20 EACH
67 67 M & L for 110mm bore PVC (SWR) vent cowl complete all as specified. 10 EACH
68 68 S & F in repairs Vitreous china Squatting Pan, white, 'Orissa' pattern, of size 580 x 440mm, with integral foot rests including cast iron 'P' or 'S' trap and provision of cement concrete bedding and making good the disturbed surfaces to match with existing flooring complete all as directed. 15 EACH
69 69 S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white, plastic water closet seat of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 5 EACH
70 70 S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32mm bore PVC flush pipe complete all as specified and directed. 20 EACH
71 71 S & F in repairs Vitreous china wash basin, white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm bore PTMT waste coupling, PVC waste pipe complete all as specified and directed. 15 EACH
72 72 S & F in repairs Vitreous China urinal, half stall type white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed. 5 EACH
73 73 S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed. 40 EACH
74 74 S & F in repairs sinks with drainage board of size not les than 915x460mm, bowl size 410x330x160mm made of stainless steel AISI 304 (SS-304) 1mm thick with plugs, washers and wastes, including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed. 15 EACH
75 75 S & F in repairs Stainless steel tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges ) complete all as directed 15 EACH
76 76 S & F in repairs 15mm dia fancy type, CP Stop valve, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. 45 EACH
77 77 S & F in repairs bevelled edge looking mirror of selected quality glass, of size 600 x 450 x 5.5mm thick mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium beading alround complete all as specified and directed. 15 EACH
78 78 S & F in repairs 15mm dia Pillar tap, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. 15 EACH
79 79 S & F Grating round 140mm dia of PTMT (Minimum weight 50gms) complete all as specified 20 EACH
80 80 S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. 50 EACH
81 81 Complete removal of existing roof treatment, roughening the concrete surfaces by picking, sweeping, cleaning and washing down with water to remove dust, etc including M & L for brushing cleaned roof surfaces with neat cement slurry @3kg/ Sqm and applying 5mm thick cement screed in cement mortar 1:4 mixed with and including water proofing compound @ 2% by weight of cement, applying polymeric water proofing membrane (APP based) of weight not less than 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wwoven fabric (weight not less than 150 gms/Sqm) including coating the surface with water based bituminous primer @ 0.5 lit / Sqm and hot blown bitumen @ 1.20 Kg/Sqm at the bottom and another coat at top of the membrane and finally finished with one coat of bitumineous aluminium primer at 100 grams/Sqm complete all as specified and directed by the Engineer-in-Charge.\n 500 SqM
82 82 Demolition of RCC water tanks of any size at any position (reinforcement cut as required to facilitate demolition) complete all as directed. 4 CuM
83 83 S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including 20mm dia PTMT ball valve complete all as specified and directed. 20 EACH
84 84 S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position including 20mm dia PTMT ball valve complete all as specified and directed. 10 EACH
85 85 S & F in repairs 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. 20 EACH
86 86 Supplying and fixing of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls / ceiling or laying in floors including taking down old GI tubing 15mm dia complete all as specified and directed. 200 RM
87 87 Supplying and fixing of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls / ceiling or laying in floors including taking down old GI tubing 20mm dia complete all as specified and directed. 340 RM
88 88 Taking down GI tubing 15mm dia from any position including cleaning and refixing the pipe in new or old location with suitable fittings complete all as directed 25 RM
89 89 Taking down GI tubing 20mm dia from any position including cleaning and refixing the pipe in new or old location with suitable fittings complete all as directed 40 RM
90 90 S & F in repairs Aluminium powder coated curtain rails fixed with and including suitable brackets complete all as directed. 150 RM
91 91 S & F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed. 90 SqM
92 92 S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from any position complete all as specified and directed. 40 SqM
93 93 S & F in repairs Aluminium door closer hydraulically regulated, of designation No. 2, universal type, suitable for door shutters of width of 701 to 850mm and weight between 36 to 60 kg and fixed complete all as specified and directed. 5 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail