}

Upgradation Of Sub Health Centre To Health And Wellness Centre ( Hwc ) At Village Chiken In Panchkula Distt . , Chandigarh-Chandigarh

Public Works Department-PWD has published Upgradation Of Sub Health Centre To Health And Wellness Centre ( Hwc ) At Village Chiken In Panchkula Distt . . Submission Date for this Tender is 01-06-2020. Building Work Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

24302199
Upgradation Of Sub Health Centre To Health And Wellness Centre ( Hwc ) At Village Chiken In Panchkula Distt .
Open Tender
Indian
Chandigarh
Chandigarh
01-06-2020

Tender Details

Upgradation Of Sub Health Centre To Health And Wellness Centre ( Hwc ) At Village Chiken In Panchkula Distt .

Key Value

Document Fees
INR 1000 /-
EMD
INR 14000.0 /-
Tender Value
INR 6.82 Lakhs /-

BOQ Items

Name of Work: Upgradation of Sub Health Centre to Health & Wellness Centre (HWC) at Village Chiken in Panchkula Distt.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm. layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6). BI01010001010000000000000515BI0100001113 21.09 Cum (Per Cubic Metre)
2 2 Dismantling brick work, tile masonry or tile lining and tile terracing (HSR 8.5) (b) BI01010001010000000000000515BI0100001114 3.82 Cum (Per Cubic Metre)
3 3 Scrapping (a) white wash and colour wash[HSR 8.32 (a)] BI01010001010000000000000515BI0100001115 237.65 Sqm. (Per Square Metre)
4 4 Scrapping (c) cement plaster [HSR 8.32 (c)] BI01010001010000000000000515BI0100001116 141.89 Sqm. (Per Square Metre)
5 5 Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth (HSR 10.26). BI01010001010000000000000515BI0100001117 2.39 Cum (Per Cubic Metre)
6 6 Cement concrete 1:4:8 with stone aggregate 40 mm nominal size in foundation & plinth. (HSR 10.39) BI01010001010000000000000515BI0100001118 22.9 Cum (Per Cubic Metre)
7 7 Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. (HSR. 10.82 ) BI01010001010000000000000515BI0100001119 4.69 Cum (Per Cubic Metre)
8 8 Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (Straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centring and shuttering, laid in position complete in all respects. (HSR. 10.86) BI01010001010000000000000515BI0100001120 0.55 Cum (Per Cubic Metre)
9 9 Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 Kg. per sqm. laid hot and sanded. (HSR 10.114) BI01010001010000000000000515BI0100001121 9.29 Sqm. (Per Square Metre)
10 10 Providing and laying 80mm thick interlocking paver blocks ISI marked (IS code: 15658:2006) of all shapes and colours in design mix cement M-40 as per IRC:SP:63-2004, over a bed of 30 mm thick fine sand complete in all respects. [HSR 10.159] BI01010001010000000000000515BI0100001122 148.41 Sqm. (Per Square Metre)
11 11 First class brick work laid in cement sand mortar 1:4 in foundation & plinth. (HSR 11.4) BI01010001010000000000000515BI0100001123 11.88 Cum (Per Cubic Metre)
12 12 First class brick work laid in cement sand mortar 1:4 in 1st storey upto 4 metre above plinth level. (HSR 11.9) BI01010001010000000000000515BI0100001124 22.53 Cum (Per Cubic Metre)
13 13 Terracing consisting of 19mm thick heat resistant tiles for roof insulation 300mmx300mm laid on 20mm thick 1:3 cement coarse sand mortar including grouting with neat white cement over average 75mm thick screed of 1:8:16 including two coats of bitumen laid hot at 1.65 Kg per sqm. on top of RCC slab & cleaning of top surface complete. The tiles shall be made of white cement bleneded with fibrous polymer having flextural stress value of >150 kg/Cm2 & thermal conductivity value <0.18 w/m.k. (HSR 13.97) BI01010001010000000000000515BI0100001125 102.51 Sqm. (Per Square Metre)
14 14 Base course of floors consisting of 100mm thick cement concrete 1:8:16 and 100mm sand or stone filling (HSR 14.1) BI01010001010000000000000515BI0100001126 24.39 Sqm. (Per Square Metre)
15 15 Conglomerate floor 50mm thick cement concrete topping 1:2:4 (HSR 14.10) BI01010001010000000000000515BI0100001127 3.15 Sqm. (Per Square Metre)
16 16 Laying and fixing vitrified/ceramic anti skid tiles of any size of approved make in floors laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (Tiles shall be supplied by the Department) (HSR 14.93) BI01010001010000000000000515BI0100001128 24.39 Sqm. (Per Square Metre)
17 17 12 mm Thick Cement Plaster 1:4 on the rough side of single or half brick wall. (HSR 15.5). BI01010001010000000000000515BI0100001129 173.26 Sqm. (Per Square Metre)
18 18 12mm thick cement plaster 1:6 (HSR 15.7) BI01010001010000000000000515BI0100001130 68.47 Sqm. (Per Square Metre)
19 19 15mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10) BI01010001010000000000000515BI0100001131 76.57 Sqm. (Per Square Metre)
20 20 10mm thick cement plaster 1:4 (HSR 15.52) BI01010001010000000000000515BI0100001132 66.35 Sqm. (Per Square Metre)
21 21 Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2) BI01010001010000000000000515BI0100001133 62.73 Sqm. (Per Square Metre)
22 22 Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3) BI01010001010000000000000515BI0100001134 62.73 Sqm. (Per Square Metre)
23 23 Applying priming coat on steel work consisting of genuine red lead mixed with linseed oil and turpentine oil in equal proportions (HSR 16.10) BI01010001010000000000000515BI0100001135 29.29 Sqm. (Per Square Metre)
24 24 Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron work (HSR 16.11) BI01010001010000000000000515BI0100001136 29.29 Sqm. (Per Square Metre)
25 25 Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25). BI01010001010000000000000515BI0100001137 379.54 Sqm. (Per Square Metre)
26 26 Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.26). BI01010001010000000000000515BI0100001138 237.65 Sqm. (Per Square Metre)
27 27 Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre board etc. (HSR 16.27) BI01010001010000000000000515BI0100001139 68.47 Sqm. (Per Square Metre)
28 28 Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.79 (b)). BI01010001010000000000000515BI0100001140 281.19 Sqm. (Per Square Metre)
29 29 Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81) BI01010001010000000000000515BI0100001141 587.31 Sqm. (Per Square Metre)
30 30 Supplying and fixing glass panes with moulding of commercial hard wood such as hollock, champ, chikrassy and chaplash etc. (non coniferous timber, other than teak, conforming to I.S. Specification No. 1003, kiln seasoned) (HSR 17.36) (c)4mm thick (glazing area above 55 sq dm. but upto 84 sq. dm of each pane) BI01010001010000000000000515BI0100001142 1.53 Sqm. (Per Square Metre)
31 31 Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock, Champ, Chikrassy & Chaplash only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. (HSR 17.92 (ii) BI01010001010000000000000515BI0100001143 6.57 Sqm. (Per Square Metre)
32 32 Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (b) decorative veneering with vertical grains or cross bands and face veneer one side teak face and on the other side commercial facing edges lipped with commercial hard wood with laminated core. (i) 25 mm thick. (HSR 17.93 (iii)-17.95 Note BI01010001010000000000000515BI0100001144 8.14 Sqm. (Per Square Metre)
33 33 Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12). BI01010001010000000000000515BI0100001145 20.7 Qtl. (Per Quintal)
34 34 Fe-500 EQR/TMT steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete in all respect. Note: - Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. From the length so measured, the weight of reinforcement shall be calculated in tones on the basis of IS : 1732. Wastage, overlaps, coupling, welded joints space bars, chairs, stay, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement)(NS). BI01010001010000000000000515BI0100001146 4.72 Qtl. (Per Quintal)
35 35 Pressed steel sheet frames (Chowkats) consisting of 2mm thick steels heet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to PWD specfications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete (HSR 18.34 (b) door and window frame of size 76mmx38mm with 35mm wide single rebate BI01010001010000000000000515BI0100001147 25.76 RMT (Per Running Metre)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail