Andhra Pradesh Disaster Recovery Project has published Construction Of Infrastructure To Kambalakonda Construction Of Infrastructure To Kambalakonda Central Nursery In Visakhapatnam Range Of Visakhapatnam ( T ) Division . . Submission Date for this Tender is 08-06-2020. Infrastructure Work Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Package No 3 Construction of infrastructure to Kambalakonda Central Nursery in Visakhapatnam Range of Visakhapatnam (T) Division | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Strengthening of existing road | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Construction of cement treated Gravel Sub base using 4.5 percent quantity of cement by weight of soil (percentage of cement will vary by design mix) and by providing, laying and spreading well graded material (i.e. 9.5mm to 4.75mm size gravel of 66% and crusher dust of size < 2.36mm @34%)having LL <45, PI<20 & Uniformty coefficient (Cu) >5 on a prepared sub grade, pulverising, adding the designed quantity of cement to the spread soil, mix shall be designed for a minimum laboratory 7 days unconfined compressive strength of not less than 1.7 MPa (17kg/sqcm) for sub base and mixing in place with rotavator, grading with tractor grader and compacting with the road roller at OMC to achive the desired unconfined compressive strength and to form a layer of sub base as per MORD technical specification clause 404, including contractors profit & over head charges, seignorage charges and all taxes i.e. GST | BI01010001010000000000000515BI0100001113 | 55.5 | cum |
| 3 | 2 | Rennovation of existing gates | BI01010001010000000000000515BI0100001112 | ||
| 4 | 2.01 | Removing white wash or colour wash by steel wire brushing and/or scraping; sand papering and preparing the wall surface smooth including necessary repairs to scratches complete inluding cost and conveyance, over head charges and contractor profit & all taxes i.e. GST | BI01010001010000000000000515BI0100001114 | 41.63 | sqm |
| 5 | 2.02 | Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of old walls two coat of approved make shade and colour over existing primer including cost and conveyance of materials like Plastic Emulsion paint to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc.over head& contractor profit, all taxes i.e. GST etc. complete for finished item of work (APSS No.910, 911&1201) in all floors. | BI01010001010000000000000515BI0100001115 | 41.63 | sqm |
| 6 | 2.03 | Painting with Synthetic Enamel paints - Two Coats - For Old Iron Work including cost of all materials, labour charges such as scaffolding, lift charges, over head charges and contractor profit, all taxes i.e.GST etc., complete for finished item of work. | BI01010001010000000000000515BI0100001116 | 18.23 | sqm |
| 7 | 2.04 | Painting two coats including prime coat after filling the surface with synthetic enamel paint in all shades on new plastered/concrete surfaces as per drawing and technical specification clause 1701 of MORD including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes i.e. GST etc., complete as per direction of Engineer in charge (RBR-TSRA-6). | BI01010001010000000000000515BI0100001117 | 5.6 | sqm |
| 8 | 2.05 | Painting new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give and even shade as per drawing and technical specification clause 1701 of MORD including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes i.e. GST etc., complete as per direction of Engineer in charge (RBR-TSRA-1). | BI01010001010000000000000515BI0100001118 | 1330 | cmht |
| 9 | 3 | Providing Water distribution system | BI01010001010000000000000515BI0100001112 | ||
| 10 | 3.01 | Providing HDPE 6kg/sqcm pipe line by earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline of trench size 0.70X1.00 mts and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth including cost and conveyance of all materials to work spot labour charges, all taxes i.e. GST etc., complete BUT EXCLUDING COST OF VALVES AND OTHER JOINTING MATERIALS . | BI01010001010000000000000515BI0100001119 | 600 | Rmt |
| 11 | 3.02 | Providing tap connection using 15mm dia GI pipe and specials including cost and conveyance of all materials and all labour charges, over heads &contractor profit and all taxes i.e. GST as per the direction of Engineer in charge | BI01010001010000000000000515BI0100001120 | 10 | no |
| 12 | 4 | Construction of Primary beds | BI01010001010000000000000515BI0100001112 | ||
| 13 | 4.01 | Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage charges, all taxes i.e..,GST but excluding dewatering charges etc., as per SS 20 B(APSS 308) | BI01010001010000000000000515BI0100001121 | 63.01 | cum |
| 14 | 4.02 | Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, all taxes i.e.,GST and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work. (APSS No. 402) | BI01010001010000000000000515BI0100001122 | 15.75 | cum |
| 15 | 4.03 | Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard other than granite stones from approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from approved quarry to the site and including cost of seigniorage charges and all taxes i.e. GST including labour for cutting stones to required size and shape, mixing of cement mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation and basement (APSS No. 601& 615) | BI01010001010000000000000515BI0100001123 | 30.12 | cum |
| 16 | 4.04 | Brick Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, all taxes i.e GST and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing,over head charges and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504). | BI01010001010000000000000515BI0100001124 | 18.31 | cum |
| 17 | 4.05 | Plastering 20mm thick in two coats for uneven surfaces with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, all taxes i.e. GST and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, over heads and contractor profit as directed by Engineer-in-charge etc., complete for finished item of work .(SS 901,903 & 904) | BI01010001010000000000000515BI0100001126 | 259.4 | sqm |
| 18 | 4.06 | White washing Two coats with Whiting of approved quality to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges such as scaffolding, lift charges, over head charges and contractor profit, all taxes i.e. GST etc., complete for finished item of work. | BI01010001010000000000000515BI0100001127 | 198.87 | sqm |
| 19 | 5 | Construction of Seed Drying platform | BI01010001010000000000000515BI0100001112 | ||
| 20 | 5.01 | Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage charges, all taxes i.e..,GST but excluding dewatering charges etc., as per SS 20 B(APSS 308) | BI01010001010000000000000515BI0100001128 | 18.37 | cum |
| 21 | 5.02 | Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, all taxes i.e.,GST and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work. (APSS No. 402) | BI01010001010000000000000515BI0100001129 | 4.59 | cum |
| 22 | 5.03 | Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard other than granite stones from approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from approved quarry to the site and including cost of seigniorage charges and all taxes i.e. GST including labour for cutting stones to required size and shape, mixing of cement mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation and basement (APSS No. 601& 615) | BI01010001010000000000000515BI0100001130 | 8.76 | cum |
| 23 | 5.04 | Brick Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all material and labour charges, all taxes i.e. GST | BI01010001010000000000000515BI0100001132 | 5.32 | cum |
| 24 | 5.05 | Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of machinery and all taxes i.e. GST | BI01010001010000000000000515BI0100001133 | 30 | cum |
| 25 | 5.06 | Plastering 20mm thick in two coats for uneven surfaces with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, all taxes i.e. GST and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, over heads and contractor profit as directed by Engineer-in-charge etc., complete for finished item of work .(SS 901,903 & 904) | BI01010001010000000000000515BI0100001134 | 77.17 | sqm |
| 26 | 5.07 | Granolithic concrete flooring 20mm thick with C.C. (1:1:2) proportion using 6mm to 12mm size graded hard granite machine crushed metal laid monolithically over existing bed of P.C.C. in alternate panels of size not exceeding 1.5x1.5m and providing 5mm thick glass strips between the panels and finishing the top surface to required smoothness and slopes including grooves, thread lining as directed by the Engineer-in-Charge including cost and conveyance of all materials to site including seigniorage charges, all taxes i.e., GST on all materials and all operational, incidental, labour charges like mixing of cement concrete, laying, curing, lift charges, seignorage charges, over heads and contractor profit etc., complete but excluding cost of CC bed for finished item of work for all floors.(APSS No. 701 & 710) | BI01010001010000000000000515BI0100001135 | 100 | sqm |
| 27 | 5.08 | White washing Two coats with Whiting of approved quality to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges such as scaffolding, lift charges, over head charges and contractor profit, all taxes i.e. GST etc., complete for finished item of work. | BI01010001010000000000000515BI0100001136 | 57.86 | sqm |
| 28 | 6 | Drilling of Bore well | BI01010001010000000000000515BI0100001112 | ||
| 29 | 6.01 | Drilling of Bore well by the down the hole hammer drilling finished dia of 150/165 mm in all formations suitable for down the hole hammer drilling such as medium hard rock formation, all consolidated formations etc and reaming the bore to sub insertion of 180 mm UPVC casing pipe etc. confirming to IS specifications of 6 Kg/ cm2 including insertion of UPVC casing pipe with couplings sand any other relevent materials upto required depth as directed by the department, transportation of drilling rigs and supporting vehicle and including bore development and flushing bore at an average pressure of 150 PSI and conducting the yield test and crew charges required in fixation of pipe assembly completely done to the satisfaction of the department as stipulated in the technical specifications but excluding cost of casing pipe, couplings ,cap etc as per IS 2800 part 1 & 2 1979 and amendements time to time. including contractor profit & over head charges, all taxes i.e. GST | BI01010001010000000000000515BI0100001137 | 90 | Rmt |
| 30 | 6.02 | Supply and utilisation of 180 mm dia UPVC casing pipe of class 3( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including over head charges and contractor profit, all taxes i.e. GST and revisions if any and confirming to technical conditions and specifications. | BI01010001010000000000000515BI0100001139 | 45 | Rmt |
| 31 | 6.03 | Supply and utilisation of 250 mm dia UPVC casing pipe of class 3( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including over head charges and contractor profit, all taxes i.e. GST and revisions if any and confirming to technical conditions and specifications. | BI01010001010000000000000515BI0100001140 | 8 | Rmt |
| 32 | 6.04 | Slotting charges for UPVC casing pipe including over head charges and contractor profit, all taxes i.e. GST | BI01010001010000000000000515BI0100001141 | 18 | Rmt |
| 33 | 6.05 | CC ( 1:2:4) using 20mm gauge HG metal including cost and conveyance of all materials and labour charges ,seign. charges etc.complete. for pedestal 0.40 X 0.40 X 0.30 ( for pedestal to protect the bore well ) including all taxes i.e. GST | BI01010001010000000000000515BI0100001142 | 0.05 | cum |
| 34 | 7 | Construction of Labour Amenity Room | BI01010001010000000000000515BI0100001112 | ||
| 35 | 7.01 | Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage charges, all taxes i.e..,GST but excluding dewatering charges etc., as per SS 20 B(APSS 308) | BI01010001010000000000000515BI0100001143 | 98.78 | cum |
| 36 | 7.02 | Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, all taxes i.e.,GST and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work. (APSS No. 402) | BI01010001010000000000000515BI0100001145 | 12.17 | cum |
| 37 | 7.03 | Plain Cement Concrete (1:2:4) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 20mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, and all charges and all taxes i.e., GST and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work. (APSS No. 402) | BI01010001010000000000000515BI0100001146 | 0.47 | cum |
| 38 | 7.04 | Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard other than granite stones from approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from approved quarry to the site and including cost of seigniorage charges and all taxes i.e. GST including labour for cutting stones to required size and shape, mixing of cement mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation and basement (APSS No. 601& 615) | BI01010001010000000000000515BI0100001147 | 23.23 | cum |
| 39 | 7.05 | Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc.seigniorage charges and all taxes i.e., GST complete for finished item of work (APSS NO. 309 & 310 | BI01010001010000000000000515BI0100001148 | 59.77 | cum |
| 40 | 7.06 | Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P,seignorage charges and all taxes i.e. GST etc. complete for finished item of work. (APSS NO. 309 & 310) | BI01010001010000000000000515BI0100001149 | 34.29 | cum |
| 41 | 7.07 | Vibrated Reinforced Cement Concrete of M25 Grade Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit and all taxes i.e., GST etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Footings | BI01010001010000000000000515BI0100001150 | 8.1 | cum |
| 42 | 7.08 | Vibrated Reinforced Cement Concrete of M25 Grade Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit and all taxes i.e., GST etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pedastals | BI01010001010000000000000515BI0100001151 | 2.59 | cum |
| 43 | 7.09 | Vibrated Reinforced Cement Concrete of M25 Grade Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit and all taxes i.e., GST etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Plinth beams | BI01010001010000000000000515BI0100001152 | 5.31 | cum |
| 44 | 7.1 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, and all taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., , as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS | BI01010001010000000000000515BI0100001153 | 3.29 | cum |
| 45 | 7.11 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, and all taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., , as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for LINTELS | BI01010001010000000000000515BI0100001154 | 0.82 | cum |
| 46 | 7.12 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, and all taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., , as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Sunshades 60cm wide and 75mm thick at fixed end & 50mm thick at free end | BI01010001010000000000000515BI0100001155 | 10.56 | Rmt |
| 47 | 7.13 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, all other taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc. as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR ROOF BEAMS | BI01010001010000000000000515BI0100001156 | 4.16 | cum |
| 48 | 7.14 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, all other taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc. as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR ROOF SLAB OF 115mm thick | BI01010001010000000000000515BI0100001157 | 92.57 | sqm |
| 49 | 7.15 | Vibrated Reinforced Cement Concrete of M25 Grade Nominal Concrete corresponding to IS 456 using Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, all other taxes i.e. GST and centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc. as per the approved shuttering plan, including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, seignorage charges, over heads & contractor profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for 50mm thick precast slabs | BI01010001010000000000000515BI0100001158 | 16.92 | sqm |
| 50 | 7.16 | Brick Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, all taxes i.e GSTand labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing,over head charges and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504). | BI01010001010000000000000515BI0100001159 | 35.92 | cum |
| 51 | 7.17 | Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, all taxes i.e. GST, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509) | BI01010001010000000000000515BI0100001160 | 28.12 | sqm |
| 52 | 7.18 | Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying, over heads & contractor profit, all taxes i.e. GST etc., complete for finished item of work in all floors. (APSS No.126) | BI01010001010000000000000515BI0100001161 | 3.6 | MT |
| 53 | 7.19 | Plastering 12mm thick in two coats for even surfaces with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. seignorage charges, over heads and contractor profit, all taxes i.e., GST as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) | BI01010001010000000000000515BI0100001162 | 251.92 | sqm |
| 54 | 7.2 | Ornamental Ceiling Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves, seignorage charges, over heads and contractor profit, all taxes i.e., GST etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) | BI01010001010000000000000515BI0100001163 | 83.82 | sqm |
| 55 | 7.21 | Plastering 20mm thick in two coats for uneven surfaces with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, all taxes i.e. GST and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, over heads and contractor profit as directed by Engineer-in-charge etc., complete for finished item of work .(SS 901,903 & 904) | BI01010001010000000000000515BI0100001165 | 142.32 | sqm |
| 56 | 7.22 | Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 20mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site, cost of seigniorage charges and all other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab, seignorage charges, over heads and contractor profit and all taxes i.e. GST complete for finished item of work (APSS No. 901 & 903) | BI01010001010000000000000515BI0100001166 | 130.34 | sqm |
| 57 | 7.23 | Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc.over head& contractor profit and all taxes i.e. GST etc. complete for finished item of work (APSS No.910, 911&1201) in all floors. | BI01010001010000000000000515BI0100001167 | 417.64 | sqm |
| 58 | 7.24 | Flooring / treads with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and finish with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials,all taxes i.e. GST cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) | BI01010001010000000000000515BI0100001168 | 55.18 | sqm |
| 59 | 7.25 | Providing skirting to internal walls to 10cm height/ risers of steps with Vitrified tiles of 8-10mm thick length equal to flooring stones, set over base coat of CM (1:3), 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost all taxes and conveyance of all materials like Tandur stone, cement (Portland Slag Cement confirming to IS 455-1989), sand and water etc., complete including seigniorage charges all taxes i.e. GST, all incidental, operation and labour etc., complete for finished item of work. (As per BLD-CSTN) | BI01010001010000000000000515BI0100001169 | 57.44 | Rmt |
| 60 | 7.26 | Flooring with 7.3mm thick non skid Ceramic floor tiles of approved brand colour shade and design of size 400 x 400 mm laid over floor bed /VRCC slab set over 12.0 mm th.in CM (1:8 ) prop. base coat and neat grey cement slurry of honey like consistence spread at the rate of 3.3 kg of cement per Sqm and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials to site seignorage fee including all mixing mortar and watering, leveling to proper slope and curing including all labour charges, over head charges and contractor profit, GST for finished item of work. (As per BLD-CSTN) | BI01010001010000000000000515BI0100001170 | 13.14 | sqm |
| 61 | 7.27 | Providing dadooing to walls with white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, over head charges & contractor profit, all taxes i.e. GST etc. complete for finished item of work. | BI01010001010000000000000515BI0100001171 | 60.42 | sqm |
| 62 | 7.28 | Flooring / treads with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and finish with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials,all taxes i.e. GST cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) for steps | BI01010001010000000000000515BI0100001172 | 3.6 | sqm |
| 63 | 7.29 | Providing skirting/Raising to internal walls to 15cm height/ risers of steps with polished Tandur stone 15mm thick, length equal to flooring stones, set over base coat of CM (1:3), 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost all taxes and conveyance of all materials like Tandur stone, cement (Portland Slag Cement confirming to IS 455-1989), sand and water etc., complete including seigniorage charges, all incidental, operation and labour, contractor profit &over head charges, all taxes i.e., GST etc., complete for finished item of work. (As per BLD-CSTN) | BI01010001010000000000000515BI0100001173 | 1.8 | sqm |
| 64 | 7.3 | Providing and fixing of single shutter door of size 1.05 x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Parlimentary Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes i.e. GST, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work. | BI01010001010000000000000515BI0100001174 | 4.41 | sqm |
| 65 | 7.31 | Providing and fixing of single shutter door of size 0.90x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Parlimentary Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes i.e., GST, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work. | BI01010001010000000000000515BI0100001175 | 5.67 | sqm |
| 66 | 7.32 | Supply and fixing of single shutter door of size 0.75x2.10m, frame and shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 40mm x 57mm duly reinforced with seasoned wood plank at the hinges side (The door frame top 2 corners shall be metri-cut/ welded) with the wall thickness of 2.0mm +/- 0.2mm equally divided into 4 No's with tongue and groove locking arrangements and door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mm X 200mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm +/-0.15mm section miter-cut and joined at 4 corners with 125mm x 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter including fixing 3 Nos. of Aluminium hinges 75mm long, 1 No. MS powder coated Al. Aldrop 150mm long, 1 No. Aluminium Tower bolt 100mm long and 1No 75mm long Al. door handle including cost and conveyance of all materials, all taxes i.e. GST and labour charges for making, fixing in position including all incidental charges etc., complete for finished item of work | BI01010001010000000000000515BI0100001176 | 7.88 | sqm |
| 67 | 7.33 | Supply, delivery and fixing at site of Powder Coated anodised aluminium Windows using outer frame of section alround the window of 45.00 x 45.00 x 1.5 mm thick section two track section and for Shutter frame Vertical and Horizontal of 65 x 27.20 x 1.50 mm thick for top & sides ,and inter lock section of two vertical pieces of section 38.20x28.50x1.20 mm thick and 'F" section of 21.30 x 16.00 x 1.35 mm with 6 mm Touhghned glass including locking arrangment and 6 mm rubber beeding, fixing of "L' angle to all corners and fixing the frame into the walls with rawal plugs, including screws, hardware and labour charges complete with 7.5 mm thick aluminium grill of 3.58 Kg/Sqmt fixed in 'F' section including all materials, labour charges loading. Unloading transport to site and incidental charges all taxes i.e. GST for complete to the work site and fixing the window frame along with grill into the walls after plastering and white was to the walls complete for GLOBAL ALUMINIUM COMPANY MAKE. | BI01010001010000000000000515BI0100001177 | 9.36 | sqm |
| 68 | 7.34 | Providing and fixing ventilators of size 0.60 x 0.45 m with frame made of Sal wood of size 75mm x 100mm and painting with black bitumen on wall side with fixing of 16mm rods (2 Nos) in frame horizontally and Glass Louvers of 5mm thick -2no.s including cost and conveyance of all materials, all taxes i.e. GST, labour charges for making and fixing in position including all incidental charges etc., complete for finished item of work. | BI01010001010000000000000515BI0100001178 | 1.35 | sqm |
| 69 | 7.35 | Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint 1st grade of approved brand and shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including cost of all materials, over head charges and contractor profit, all taxes i.e. GST etc.complete (APSS No.1200, 1207 & 1211) in all floors | BI01010001010000000000000515BI0100001179 | 26.39 | sqm |
| 70 | 8 | Rennovation to existing building | BI01010001010000000000000515BI0100001112 | ||
| 71 | 8.01 | Removing white wash or colour wash by steel wire brushing and/or scraping; sand papering and preparing the wall surface smooth including necessary repairs to scratches complete inluding cost and conveyance, over head charges and contractor profit & all taxes i.e. GST | BI01010001010000000000000515BI0100001180 | 1176.2 | sqm |
| 72 | 8.02 | Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of old walls two coat of approved make shade and colour over existing primer including cost and conveyance of materials like Plastic Emulsion paint to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc.over head& contractor profit, all taxes i.e. GST etc. complete for finished item of work (APSS No.910, 911&1201) in all floors. | BI01010001010000000000000515BI0100001181 | 1176.24 | sqm |
| 73 | 8.03 | Supply and fixing of single shutter door of size 0.75x1.65m, frame and shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 40mm x 57mm duly reinforced with seasoned wood plank at the hinges side (The door frame top 2 corners shall be metri-cut/ welded) with the wall thickness of 2.0mm +/- 0.2mm equally divided into 4 No's with tongue and groove locking arrangements and door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mm X 200mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm +/-0.15mm section miter-cut and joined at 4 corners with 125mm x 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter including fixing 3 Nos. of Aluminium hinges 75mm long, 1 No. MS powder coated Al. Aldrop 150mm long, 1 No. Aluminium Tower bolt 100mm long and 1No 75mm long Al. door handle including cost and conveyance of all materials, all taxes i.e. GST and labour charges for making, fixing in position including all incidental charges etc., complete for finished item of work | BI01010001010000000000000515BI0100001182 | 3.71 | sqm |
| 74 | 8.04 | Supply and fixing of single shutter door of size 0.75x1.75m, frame and shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 40mm x 57mm duly reinforced with seasoned wood plank at the hinges side (The door frame top 2 corners shall be metri-cut/ welded) with the wall thickness of 2.0mm +/- 0.2mm equally divided into 4 No's with tongue and groove locking arrangements and door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mm X 200mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm +/-0.15mm section miter-cut and joined at 4 corners with 125mm x 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter including fixing 3 Nos. of Aluminium hinges 75mm long, 1 No. MS powder coated Al. Aldrop 150mm long, 1 No. Aluminium Tower bolt 100mm long and 1No 75mm long Al. door handle including cost and conveyance of all materials, all taxes i.e. GST and labour charges for making, fixing in position including all incidental charges etc., complete for finished item of work | BI01010001010000000000000515BI0100001183 | 9.19 | sqm |
| 75 | 8.05 | Providing and fixing of single shutter of size 0.90x 2.00 m made with flush shutter only of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Parlimentary Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes i.e., GST, labour charges for making, fixing of fixtures and shutter in position and all incidental charges etc., complete for finished item of work for existing door frame. | BI01010001010000000000000515BI0100001185 | 5.67 | sqm |
| 76 | 8.06 | Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint 1st grade of approved brand and shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including cost of all materials, over head charges and contractor profit, all taxes i.e. GST etc.complete (APSS No.1200, 1207 & 1211) in all floors | BI01010001010000000000000515BI0100001186 | 72 | sqm |
| 77 | 8.07 | Painting with Synthetic Enamel paints - Two Coats - For Old Iron Work including cost of all materials, labour charges such as scaffolding, lift charges, over head charges and contractor profit and all taxes i.e. GST etc., complete for finished item of work. | BI01010001010000000000000515BI0100001186 | 25 | sqm |
| 78 | 9 | Providing Electrification to Amenity centre and existing building | BI01010001010000000000000515BI0100001112 | ||
| 79 | 9.01 | Supply and Fixing of 25mm dia 2.20 mm thick PVC pipe heavy grade (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges, all taxes i.e. GST etc., complete Make : Sudhakar/ Maco Plast / Modi | BI01010001010000000000000515BI0100001187 | 130 | Rmt |
| 80 | 9.02 | Supply and Fixing of 25mm dia 1.8 mm thick PVC pipe medium grade (ISI MARK) concealed in Roof Slabs/ walls with all required accessories including masonary work and labour charges, all taxes i.e., GST etc., complete Make : Sudhakar/ Maco Plast / Modi | BI01010001010000000000000515BI0100001188 | 30 | Rmt |
| 81 | 9.03 | Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe with 6A modular switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges, all taxes i.e. GST etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings | BI01010001010000000000000515BI0100001189 | 118 | no |
| 82 | 9.04 | Supply and fixing of 6A 3/2 pin wall plug modular socket with 6A, 1way switch control on a saperate switch board with earth continuity including wire leads, earth connections along with all labour charges, all taxes i.e. GST etc., complete. Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. | BI01010001010000000000000515BI0100001190 | 5 | no |
| 83 | 9.05 | Supply and fixing of 6A 3/2 pin wall plug modular socket with 6A, 1way switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc.over head charges and contractor profit and all taxes i.e. GST complete. Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. | BI01010001010000000000000515BI0100001191 | 20 | no |
| 84 | 9.06 | Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges, all taxes i.e. GST etc., complete on wall. | BI01010001010000000000000515BI0100001192 | 14 | no |
| 85 | 9.07 | Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges, all taxes i.e. GST etc., complete | BI01010001010000000000000515BI0100001193 | 250 | Rmt |
| 86 | 9.08 | Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges, all taxes i.e. GST etc., complete | BI01010001010000000000000515BI0100001194 | 60 | Rmt |
| 87 | 9.09 | Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges all taxes i.e., GST etc., complete. | BI01010001010000000000000515BI0100001195 | 20 | Rmt |
| 88 | 9.1 | Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7w LED lights (for new installation). Makes : Anchor/Gold Medal Olive /Million Zoom , for lights :Philips/Crompton/Bajaj/Havells/ Halonix/VIN/Jaquor/Renesola including cost and conveyance of all materials and all labour charges, all taxes i.e. GST etc.complete | BI01010001010000000000000515BI0100001196 | 10 | no |
| 89 | 9.11 | Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7w LED lights (for new installation). Makes : Anchor/Gold Medal Olive /Million Zoom , for lights :Philips/Crompton/Bajaj/Havells/Halonix/VIN/Jaquor/Renesola including cost and conveyance of all materials and all labour charges, all taxes i.e. GST etc.comnplete | BI01010001010000000000000515BI0100001197 | 52 | no |
| 90 | 9.12 | Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges, all taxes i. e. GST etc., complete | BI01010001010000000000000515BI0100001198 | 52 | no |
| 91 | 9.13 | Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting, all taxes i.e. GST etc., complete (40A DP Isolator / RCCB / ELCB - 1 No for incomer, 6-32A SP MCBs - 4Nos for outgoing) | BI01010001010000000000000515BI0100001200 | 1 | no |
| 92 | 9.14 | Supply and fixing TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connections and labour charges for surface / flush mounting, all taxes i.e. GST etc., complete (40A FP Isolator/ RCCB / ELCB - 1 No for incomer,10kA-6-32A SP MCBs - 12Nos for outgoing.) | BI01010001010000000000000515BI0100001201 | 2 | no |
| 93 | 9.15 | Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with electronic regulator with double ball bearings without Regulator. Makes: Crompton HS Decora / Bajaj Regal Star / Havells Fusion 50 / Orient summer crown / Usha technix decorative including cost and conveyance of all materials, all taxes i.e. GST | BI01010001010000000000000515BI0100001202 | 21 | no |
| 94 | 9.16 | Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire, all taxes i.e. GST etc., complete | BI01010001010000000000000515BI0100001203 | 21 | no |
| 95 | 9.17 | Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe medium of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges, all taxes i.e. GST etc., complete for small quarters | BI01010001010000000000000515BI0100001204 | 2 | no |
| 96 | 9.18 | Supply and Transportation of 40W LED Post top lantern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection etc., complete with all accessories Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta BGCL 40 W LED Wh/Wipro LP 02 or equivalent in Phillips/Keselec/Havells including cost and conveyanxce of all materials and all labour charges, over head charges and contractor profit, all taxes i.e. GST | BI01010001010000000000000515BI0100001205 | 2 | no |
| 97 | 10 | Providing Water supply and sanitation to amenity centre & existing building | BI01010001010000000000000515BI0100001112 | ||
| 98 | 10.01 | Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007): 15.90mm dia OD Pipe-SDR-11 including cost and conveyance of all materials and all labour charges, over heads & contractor profit, all taxes i.e..,GST of 15.90mm -OD pipe -SDR-11 | BI01010001010000000000000515BI0100001187 | 100 | Rmt |
| 99 | 10.02 | Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007): 15.90mm dia OD Pipe-SDR-11 including cost and conveyance of all materials and all labour charges, over heads & contractor profit, all taxes i.e. GST of 22.20 mm -OD pipe -SDR-11 | BI01010001010000000000000515BI0100001188 | 100 | Rmt |
| 100 | 10.03 | Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007): 15.90mm dia OD Pipe-SDR-11 including cost and conveyance of all materials and all labour charges, over heads & contractor profit, all taxes i.e. GST of 28.60 mm -OD pipe -SDR-11 | BI01010001010000000000000515BI0100001189 | 100 | Rmt |
| 101 | 10.04 | Supplying and fixing of 15mm dia Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges, all taxes i.e. GST etc. complete for finished item of work. | BI01010001010000000000000515BI0100001190 | 6 | no |
| 102 | 10.05 | Supplying and fixing of 32mm dia Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials , labour charges, all taxes i.e. GST etc. complete for finished item of work. | BI01010001010000000000000515BI0100001191 | 3 | no |
| 103 | 10.06 | Providing & fixing of 110mm dia UPVC SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes i.e. GST complete for finished item of work. | BI01010001010000000000000515BI0100001192 | 40 | Rmt |
| 104 | 10.07 | Providing & fixing of 75mm dia UPVC SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes i.e. GST complete for finished item of work. | BI01010001010000000000000515BI0100001193 | 50 | Rmt |
| 105 | 10.08 | Supply & fixing of 12.7 mm N.P bib tap Indian make heavy dutys including cost & conveyance of all materials, labour charges, all taxes i.e. GST for finished item of work complete for all floors | BI01010001010000000000000515BI0100001194 | 33 | no |
| 106 | 10.09 | Supply & fixing 580mm x 440mm size white virerous orissa pan with attached footrests of approved make confirming to IS 2556 (part - III) with 'P' or 'S' trap, including 10 lit. low level PVC flusihing system confirming to IS 7231 with all internal fittings, CI brackets, 32mm dia CP flush pipe, 15mm dia 450mm long PVC connerctor, 15mm dia Cp brass strop cock 300 grams of ISI make, cutting and making good the walls and floors wherever required including cost & conveyance of all material to work site, all labour charges for all operations for fixing, all taxes i.e. GST etc., complete for finished item of work. | BI01010001010000000000000515BI0100001195 | 2 | no |
| 107 | 10.1 | Supply & fixing European water closet of I st quality confirming to IS:2556-part-2-1973 of Hindusthan /Neycer or Parryware make white Glazed with P Trap, over head charges and contractor profit, all taxes i.e. GST etc complete for finished item of work. | BI01010001010000000000000515BI0100001196 | 7 | no |
| 108 | 10.11 | Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated including cost and conveyance of all materials and all labour charges, Contractor profit, Over head charges, all taxes i.e. GST | BI01010001010000000000000515BI0100001197 | 7 | no |
| 109 | 10.12 | Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm including cost and conveyance of all materials to site labour charges, all taxes i.e. GST etc., complete for finished item of work for all floors | BI01010001010000000000000515BI0100001198 | 4 | no |
| 110 | 10.13 | supply & fixing indian make flat back wash hand basin (HSW/parry ware/Neycer) 1 st quality confirming to IS:2556-part-4-1972 with waste fittings like rubber plug ,chain,32mm nominal size CP fittings with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium plated pillar tap of 1 st quality Indian make 400 grams seiko/senior/ nice or Equivalent complete with standard CI brakets including wooden block :550x400 mm -Single CP Pillar Cock complete, all taxes i.e. GST for finished item of work | BI01010001010000000000000515BI0100001200 | 5 | no |
| 111 | 10.14 | Supply & fixing SWG 150x100mm gully trap of 1st class as per IS standards with CI grating and constructing brick masonry chamber of size 50x35x30cm in CM 1:6 prop. Over CC 1:5:10 prop. Bed of size 50x5x10cm and plastering 12mm thick in CM 1:4 prop. To both inside & outside surfaces of the brick chamber and fitted with 30x22.5cm CI frame and hinged cover.including cost and conveyance of all materials and all labour charges, contractor profit & over head charges, all taxes i.e. GST for finished item of work | BI01010001010000000000000515BI0100001201 | 4 | no |
| 112 | 10.15 | Supply and fixing of NP soap dish heavy type with NP SCREWS including cost and conveyance of all materials and all labour charges, all taxes i.e. GST etc. complete | BI01010001010000000000000515BI0100001202 | 10 | no |
| 113 | 10.16 | Supply and fixing of 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials and all labour charges, all taxes i.e. GST etc. complete | BI01010001010000000000000515BI0100001203 | 10 | no |
| 114 | 10.17 | Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including cost and conveyance of all materials and all labour charges, all taxes i.e. GST | BI01010001010000000000000515BI0100001204 | 10 | no |
| 115 | 10.18 | Providing & Placing on terrace (at all floor levels) polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrengement & making necessary holes for inlet & outlets and over flow pipes, over head charges and contractor profit, all taxes i.e. GST but without fittings & base support for tanks etc (1000lts capacity 1no & 5000lts capacity 1no) | BI01010001010000000000000515BI0100001205 | 6000 | litre |
| 116 | 10.19 | Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.including cost and conveyance of all materials and all labour charges, all taxes. i.e. GST etc.complete | BI01010001010000000000000515BI0100001206 | 10 | no |
| 117 | 11 | Providing Chainlink mesh | BI01010001010000000000000515BI0100001199 | ||
| 118 | 11.01 | Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage charges, all taxes i.e..,GST but excluding dewatering charges etc., as per SS 20 B(APSS 308) | BI01010001010000000000000515BI0100001207 | 17.77 | cum |
| 119 | 11.02 | Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, all taxes i.e.,GST and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work. (APSS No. 402) | BI01010001010000000000000515BI0100001208 | 17.77 | cum |
| 120 | 11.03 | Supply and fixing in position RCC fencing posts 2.10 M Long and 0.15 X 0.15 mtr section Out of which 0.45mts below G.L. and true to alignment and plumb fix in exsting pits as per directions of Engineer-in-charge including cost and conveyance of all materilas and labour charges, all taxes i.e. GST etc completed finished item of work. | BI01010001010000000000000515BI0100001209 | 195 | no |
| 121 | 11.04 | Supplying of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8Gauge of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed -B15 B35(Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately) Pg no:23 & Item 143 SSR BMT - F-20 of SSR 2017-18 including cost and conveyance of all materials and all labour charges, Over head charges and contractor profit, all taxes i.e. GST | BI01010001010000000000000515BI0100001211 | 450 | Rmt |
| 122 | 11.05 | Fixing Galvanized Iron Chain Link mesh 8 gauge -(4.OOMM) AS PER IS 2/7/2018:2721-1979 4X4(50MMX50MM-8 gauge , Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed -B15 B35(Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately) including cost and conveyance of all materials and all labour charges, Over head charges and contractor profit, all taxes i.e. GST | BI01010001010000000000000515BI0100001212 | 450 | Rmt |
| 123 | 12 | Providing corrugated asbestos cement sheets for existing Vermi compost Shed | BI01010001010000000000000515BI0100001199 | ||
| 124 | 12.01 | Roofing with 6 mm thick corrugated asbestos cement sheets, fixing with G.I ‘J’ bolts & nuts 8 mm dia G.I plain washers complete including seigniorage charges etc., complete for finished item of work, but excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials and all taxes i.e. GST – upto 600 pitch | BI01010001010000000000000515BI0100001213 | 100.3 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
