}

Addition And Alteration And Special Repair To Perimeter Security Wall At Naval Dockyard Colaba Mumbai Under Ge Nw Kunjali, GE NW Kunjali-Maharashtra

Military Engineer Services-MES has published Addition And Alteration And Special Repair To Perimeter Security Wall At Naval Dockyard Colaba Mumbai Under Ge Nw Kunjali. Submission Date for this Tender is 13-06-2020. Civil Work Tenders in GE NW Kunjali Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

24204905
Corrigendum : Addition And Alteration And Special Repair To Perimeter Security Wall At Naval Dockyard Colaba Mumbai Under Ge Nw Kunjali
Open Tender
Indian
Maharashtra
GE NW Kunjali
13-06-2020

Tender Details

Addition And Alteration And Special Repair To Perimeter Security Wall At Naval Dockyard Colaba Mumbai Under Ge Nw Kunjali

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 14-May-2020 dt Date 06-06-2020
2 06-Jun-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 13-06-2020

Key Value

Document Fees
INR 2000 /-
EMD
INR 500000.0 /-
Tender Value
INR 4.25 Crore /-

BOQ Items

Name of Work : ADDITION AND ALTERATION AND SPECIAL REPAIR TO PERIMETER SECURITY WALL AT NAVAL DOCKYARD COLABA MUMBAI UNDER GE (NW) KUNJALI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of brick work or stone / boulder masonry built in cement mortar, including all quoins, arches, pillars, etc. complete all as specified and directed.\n 500 Cum
2 2 Dismantling wrought iron or mild steel work of any description complete all as specified and directed. 10 Qtl
3 3 Taking down cement plater in brick/surface built in cement mortar inculding raking out joints, bading for key scrubbing down with water complete all as specified and directed . 400 Sqm
4 4 Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.\nNote: i)The contractor will place of strong barricades with Mild Steel and galvalume sheets as directed by EIC before demolition and new brick / RCC work due to work to be executed under highly restricted area till completion of execution of the stretch. The cost of barricates is deemed to be included in respective items and No extra amount shall be paid on this account\nII) Site shall be handed over in 50M stretch in one time adjoining civil area and 100 M stretch in Sea face area for Demolition / execution of boundary wall 400 Cum
5 5 Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in disintegrated rock complete all as specified and directed . 500 Cum
6 6 All as per Srl Item No 5 here in before but depth exc 1.5 m but n exc 3.0 m 500 Cum
7 7 M&L for Cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed. 90 Cum
8 8 M&L for design mix M-40 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed . 400 Cum
9 9 M&L for design mix M-40 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed . 150 Cum
10 10 M&L for design mix M-40 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed . 90 Cum
11 11 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. 1500 Sqm
12 12 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup­ ports, overhangs, etc. also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed. 1000 Sqm
13 13 Formwork to sides of pillars, posts, struts, piers, columns and stanchions Square, rectangular or polygonal complete all as specified and directed . 600 Sqm
14 14 M&L for Mild steel TMT bars of 10mm dia and over, cut to length bent to shape reqd incl cranking bending spirally for hooping for coln, hooking ends and binding with MS wite (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed . 225000 Kg
15 15 All as per Srl item No 14 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 12000 Kg
16 16 M&L for Pre-cast cement concrete block masonry with solid blocks, (1:2:4) type B1 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed . 700 Cum
17 17 M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix, 40mm thk in two coats, using polymer @ 10 to15% by weight of cement complete & finally finishing the surface complete all as specified and directed . Make : Dr. Fixit/ Sunanda/ chemestik/ Fosrok.\nNote :-New reinforcement and MS Sections will be measured and paid separately 2400 Sqm
18 18 S&F welded steel wire fabric, cut to length, fixed to steel members/ reinforcement steel, weigh per Sqm nexc. 4 Kg complete all as specified and directed . 4000 Kg
19 19 M & L for framed work as in doors or gates of angle or other section of grade Fe 410-0 (Gde E 250) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed . 12000 Kg
20 20 S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed . 5000 Kg
21 21 M&L for plastering in CM 1:4, using 15 mm thick in two coats with water proofing compoundat the rate of 2% by weight of cement and finishing the surface seven and fair complete all as specified and directed.\n( Note-WPC will be measured and paid seperately) 5400 Sqm
22 22 Supply only integral water proofing compound (ISI Marked) 300 Kg
23 23 M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and directed as per manufacturer's instruction. 7800 Sqm
24 24 M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 800 Sqm
25 25 S&F 100mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. 50 RM
26 26 S&F 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. 200 RM
27 27 M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. 125 Cum
28 28 M&L Cement concrete 1:2:4, type B2 (40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed. 50 Cum
29 29 M&L for Cement concrete 1:2:4 type B2 (using 40 mm graded stone agreegate) as in surface channels and drains complete all as specified and directed . 50 Cum
30 30 M&L for Cement concrete 1:3:6 type C1 (using 20 mm graded stone agreegate) as in coping complete all as specified and directed. 10 Cum
31 31 Returning filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed . 460 Cum
32 32 Removing excavated materials and debris exc. 1.50 Km and depositing outside MD land, complete all as specified and directed . 40 Cum
33 33 S&F of GI cable tray pertorated type 2mm thick of size 300x50mm to be fixed on any wall (brick/stone) vertically / horizontally including all accessories complete bending, shaping, drilling, welding, cutting & all fixing arrangement such as suitable cable tray shall be "SNP controls" /National or equivalent complete all as specified and directed . 550 RM
34 34 Suppply & fixing pre fabricated GI clamp suitable for fixing / supporting 300x50mm size cable trays complete with buzzer bolts/hold fastener complete all as specified & directed.\nNOTE : Contractor deemed to be included the making the good to the disturbed surfaces to match with the existing complete all as specified and directed. 550 Each
35 35 S&F in repair FRP looping box 225X295X122mm with locking arrangment shockproof and rustproof,rot-proof and termite resistance, cable entry from bottom and side,100% weather proof for outdoor installation suitable for pole mounting tamper proof restricts unauthorised tapping IS 11731,IP 66/67 suitable for 16-35mm Sqmm 3.5 core aluminium cable including 1 No MCB 6-32 Amp and connector bldock two way and fixing with flat aluminium clamps not less than 25mmx3mm with suitable size nuts, bolts and washers inside and outside looping box complete as directed.\nMake Nation product code- NJB 2520/Sintex/Hensel cat No KF 3500H 55 Each
36 36 Supply laying & testing cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 100 volts grade with stranded aluminium conductor of size 16sqmm 4 core including disconnecting / taking down carefully old cable of any size including removal of junction box and other connected materials, complete all as specified and directed.\nMake:- Gloster/ Polycab/ Havells/ Plaza 550 RM
37 37 All as per Srl item No. 36 here in before but conductor of size 25 sq mm 4 core 550 RM
38 38 Supply & fix in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 9 mtrs long top mounting on foundation complete with base plate and final including PCC foundation as per manufacturer design with 1500 mm long Arms bracket,tapper plug,bolts nuts and screws etc as specified complete all as specified and directed including taking out existing damaged pole with street light bracket complete all as specified and directed . 10 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail