}

Providing Of Toilet Block Near Attached Barracks Of Tps And Trg Infra Development At Fort William Environmental Park And Trg Area Inside Fortwilliam Under Ge Fw ) Kolkata, Fort William Kolkata-West Bengal

Military Engineer Services-MES has published Providing Of Toilet Block Near Attached Barracks Of Tps And Trg Infra Development At Fort William Environmental Park And Trg Area Inside Fortwilliam Under Ge Fw ) Kolkata. Submission Date for this Tender is 30-05-2020. Toilet Bathroom Tenders in Fort William Kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

24173635
Corrigendum : Providing Of Toilet Block Near Attached Barracks Of Tps And Trg Infra Development At Fort William Environmental Park And Trg Area Inside Fortwilliam Under Ge Fw ) Kolkata
Open Tender
Indian
West Bengal
Fort William Kolkata
30-05-2020

Tender Details

Providing Of Toilet Block Near Attached Barracks Of Tps And Trg Infra Development At Fort William Environmental Park And Trg Area Inside Fortwilliam Under Ge Fw ) Kolkata

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 06-May-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 13-05-2020
2 14-May-2020 DATE CORRIGENDUM Date 23-05-2020
3 25-May-2020 Date Corrigendum Date 30-05-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 57700.0 /-
Tender Value
INR 28.85 Lakhs /-

BOQ Items

Name of Work: PROVN OF TOILET BLOCK NEAR ATTACHED BARRACKS AND TRG INFRA DEVELOPMENT AT FORT WILLIAM ENVIRONMENTAL PARK AND TRG AREA INSIDE FORTWILLIAM UNDER GE FW) KOLKATA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 SCHEDULE 'A' PART-I (B/R WORKS)
2 1.01 M&L for Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. 366 SQM
3 1.02 M&L for Excavating over areas, n exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed. 10 CUM
4 1.03 M&L Hard core broken bolders to gauge exc 63 mm and n exc 100mm broken boulders or quarried stone, interstices filled, surface formed & rolled & consolidated to required gradient & camber complete all as specified and directed. 77.6 CUM
5 1.04 M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed. 20 CUM
6 1.05 M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and directed. 22.13 CUM
7 1.06 M&L for Brickwork with subclass `B' fly-ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed. 45 CUM
8 1.07 M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) complete all as specified and directed. 250 SQM
9 1.08 Supply only integral water proofing compound complete all as specified and directed. 20 KG
10 1.09 M & L for rendering 20 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. 150 SQM
11 1.1 S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O complete all as specified and directed. 250 KG
12 1.11 M&L for applying two coats of synthetic enamel paint on new steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed. 37.6 10 RM
13 1.12 M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed. 150 SQM
14 1.13 M&L for applying two coats of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including primer coat and preparation of new surface complete all as specified and directed. 25 SQM
15 1.14 M&L preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. 260 SQM
16 1.15 S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed. 60 SQM
17 1.16 -ditto- but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof. 10 SQM
18 1.17 M&L for Mild steel hand rails, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete . 300 Kg
19 1.18 M&L RCC type A1 (1:1½:3) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 2 CUM
20 1.19 M&L Mild steel TMT bars 6mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. 100 KG
21 1.2 M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed. 10 SQM
22 1.21 M&L for White Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in cement mortar(1:4) complete all as specified and directed. 140 SQM
23 1.22 M & L non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 40 SQM
24 1.23 S&F GI Tubes, medium grade with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and directed. 50 RM
25 1.24 S&F GI Tubes, medium grade with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and directed. 30 RM
26 1.25 S&F GI Tubes, medium grade with all fitting; laid in trenches of 25mm bore complete all as specified and directed. 60 RM
27 1.26 S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. \n(Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208) 16 EACH
28 1.27 S&F Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. \n(Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204) 2 EACH
29 1.28 S&F Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. 4 EACH
30 1.29 S & F 20 mm bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 2 EACH
31 1.3 Supply and fixing Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.\n(MAKE : PRAYAG, Cat No. 199 or equivalent model in SHAKTI / JEXON/POLYTUF) 7 EACH
32 1.31 S&F Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.\n(MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON) 10 EACH
33 1.32 S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting and 32 mm dia PVC waste pipe, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed.\n(MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 or equivalent model in CERA) 2 EACH
34 1.33 Supply and fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed. 2 Each
35 1.34 S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed.\n(MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / PRAYAG, Model : Smart or equivalent model in COMMANDER / CERA) 7 EACH
36 1.35 S & F cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed. 7 EACH
37 1.36 M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed. 14 EACH
38 1.37 S & F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed. 30 RM
39 1.38 S & F CI bend 100 mm bore with oval access door complete all as specified and directed. 14 EACH
40 1.39 S & F plain bend 100 mm bore complete all as specified and directed. 7 EACH
41 1.4 S & F CI branch piece single (equal or unequal) for 100 mm bore pipe complete all as specified and directed. 4 EACH
42 1.41 Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. \n(MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA) 7 EACH
43 1.42 S/F 150mm bore RCC pipes class NP3 laid & jointed complete and directed by Engr -in-Charge. 10 RM
44 1.43 M&L cement concrete type C2 ( 1:3:6) using 40 mm graded stone aggregates, bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid & tested for 150mm bore complete all as specified and directed. 8 RM
45 1.44 S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement all as directed 25 SQM
46 1.45 S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instrutions. 72 RM
47 1.46 M&L mild steel work as in holdfast, clamps for pipes, etc made out of flat iron any size including necessary welding or fixing nuts and bolts complete all as specified and directed. 2 Kg
48 1.47 S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed (upto 04 storey High of building) 14 EACH
49 1.48 S&F 125 mm long Aluminium handles, cast type, anodisedcomplete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) 16 EACH
50 1.49 S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) 48 EACH
51 1.5 S&F, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, concealed body screwed both ends for iron pipe or for unions and, complete all as specified and directed.\n(MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN) 16 EACH
52 1.51 S&F Chromium plated brass Angular stop cock concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed.\n(Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: T-112 / CERA, Model: OCEAN) 4 EACH
53 1.52 Construction of brick masonry Septic Tank, 30 users capacity complete all as specified and shown on drawings. \n 1 EACH
54 1.53 Construction of brick masonry Soakage Well, 1.80 metre dia x 3.0 metre deep complete all as specified and shown on drawings. \n 1 EACH
55 1.54 S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified \n(MAKE : PARRYWARE, Cat No. C0501 / HINDWARE, Cat No. 60001 / CERA, Cat No: S4020103 or equivalent model in JAQUAR) 2 EACH
56 1.55 Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. 2 EACH
57 1.56 S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.\n(MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI) 2 EACH
58 1.57 M&L for applying two coats of synthetic enamel paint on old treated steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including cleaning and preparation of surfaces complete all as directed. 82 SQM
59 1.58 M&L excavating in post holes (or similar holes) each in soft/ loose soil n exc 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc 50 cm and making good surface complete all as specified and as directed. 34 EACH
60 1.59 M&L for PCC 1:2:4 type B2, 40mm graded aggregate of 100mm thick, finished even and rough complete all as specified and directed. 276 SQM
61 1.6 M & L for pre-polished decorative cement concrete tiles, 400mmx400mmx25mm thick, of approved design and colour, as in path set jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 276 SQM
62 1.61 M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. 3795 Kg
63 1.62 M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs (framed) including stringers, treads landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and directed. 100 KG
64 1.63 Supply and fixing 2 mm thick polycarbonate coloured profiled sheets as in roof etc, fixed over steel structure with coach screws and washers as per manufacturer instructions and matching with existing profile complete all as specified and directed. 250 Sqm
65 1.64 M&L Rendering 150mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed. 60 SQM
66 2 SCHEDULE 'A' PART-II (E/M WORKS)
67 2.01 Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed.\n(NOTES: - \n(i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same.\n(ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)\n 27 Point
68 2.02 All as per item No. 2.01 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box). 4 Point
69 2.03 All as per item No. 2.01 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box). 8 Point
70 2.04 S & F Switch piano, flush type 5 Amps, one way complete all as specified and directed. 27 Each
71 2.05 S&F switch socket combination outlet, 3 pin 5 Amps flush type complete all as specified and directed. 4 Each
72 2.06 S & F switch socket combination outlet, multipurpose 3 pin, 15/16 Amps flush type with indicator lamp complete all as specified and directed. 8 Each
73 2.07 S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. 19 Each
74 2.08 S&F surface mounted LED luminaire, 1 X 9 Watt in polycarbonate housing, with polycarbonate diffuser & integrated electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.\n(MAKE : HAVELLS, Model : Lumline / HALONIX, Cat No: HLB-07-10-CW-IP / CROMPTON, Cat No: LCTLN-10-CDL / CENTURY LED LTD, Cat No : BWUL010C / SIMOCO, Cat No: SLT52F10CB / BAJAJ, Cat No: BCLSB 10 NW or equivalent model in PHILIPS / SURYA / PANASONIC / JAQUAR / HPL / C&S / RASHMI ) 4 EACH
75 2.09 S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, with polycarbonate diffuser & integrated electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.\n(MAKE: HAVELLS, Model: Lumline Plus / HALONIX, Cat No: HLB-03-20-CW-AL / SURYA, Cat No: SLE BTN T8 20W / BAJAJ, Cat No: BCLSBAL 20W CW / JAQUAR, Cat No: LGLZ01X020XC / PANASONIC, Cat No: PBTM08204 / HPL, Cat No: HLPT51520CW / CROMPTON, Cat No: LDL-20-CDL or equivalent model in PHILIPS / CENTURY LED LTD / C&S / RASHMI) 15 EACH
76 2.1 S&F exhaust fan 250 mm sweep, and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose to fan complete all as specified and directed.\n(MAKE : HAVELLS, Model : Venti Air DX / CROMPTON, Model : Brisk Air / USHA, Model: CRISP AIR or equivalent model in BAJAJ / ORIENT / POLAR) 8 EACH
77 2.11 Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed.\n(MAKE : L&T, Cat No. DBSPN008DD / ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D / C&S, Cat No: CSDBSPNPDD08 / BCH, Cat No: BCHSPNDD08W / HPL, Cat No: MDBDD08 / HAVELLS, Cat No: DHDPSHODRW08 or equivalent model in INDO ASIAN (OPTI PRO) / LEGRAND)\nNOTE :-\n(1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately as "Supply Only".\n(2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs.\n(3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.\n 2 EACH
78 2.12 Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.\n 2 EACH
79 2.13 Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.\n 12 EACH
80 2.14 M&L for sub main wiring with two run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, surface type complete all as specified and directed.\n(NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)\n 100 RM
81 2.15 Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed. 1 Each
82 2.16 Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in soft/loose soil and getting complete all as specified and as directed. 12 CUM
83 2.17 Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed. 8 CUM
84 2.18 Removal of excavated material to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. 4 CUM
85 2.19 M&L for sand cushioning/sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.\n(NOTE: Punned thickness shall be measured for payment) 3 CUM
86 2.2 M&L factory made un-reinforced pre-cast concrete cable cover flat of size 250 x 150 x 40mm thick, Class LV, type-I to protect LT grade laid perpendicular to the axis of the cable complete all as specified and directed. 230 Each
87 2.21 S&F Bracket/Arm suitable for street light fittings, made out of 32 mm bore (light grade) GI pipe length not exceeding 1.20 metre long, fixed with 02 sets of flat iron clamp of size 32mm x 6 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge. 2 Each
88 2.22 Supply and fix 25 Watt LED Street light fitting, pressure die-cast aluminium roadway luminaries with high powered LED (having minimum efficacy of 100 lumen/watt) with secondary optics including surge protection, constant current driver with in built protection against lightning, over voltage & short circuit, LM6 Housing, IP 66 with operating voltage range 140 to 270 V with complete with all accessories complete all as specified and directed.\n(Make: SURYA, Cat No: SLE UL 25W IP66 LXN / HAVELLS, Model: ENDURA PEARL / HALONIX, Model: LUMOX MINI / CROMPTON, Model: PINNACLE NEO / SIMOCO, Cat No: SLSL25WL / HPL, Cat No: HPLLEDSL2560P / JAQUAR, Cat No: LSRT01S025XW / PANASONIC, Cat No; PSTM09258)\n(NOTE: Bracket and wire for electric connection shall be measured and paid separately)\n 2 Each
89 2.23 Supply & fixing PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 sq mm for proving necessary electrical connection from junction box to light fittings complete all as specified and as directed. 5 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail