Military Engineer Services-MES has published Special Repair Of Bldg No Sm _ 17 And Bldg No Mt-8 Mt- 9 ) At Inside Fort Under Ge ( Fw ) Spl Repair Of Bldg No Sm- 17 And Bldg No Mt-8 Mt- 9 ) At Inside Fort Under Ge ( Fw ) Kolkata. Submission Date for this Tender is 08-06-2020. Building Repair Tenders in Kolkata-21 West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Apr-2020 | Postponed all critical dates due COVID-19 | Date | 11-05-2020 |
2 | 04-May-2020 | Postponed critical dates due the prevailing situation of Covid-19 outbreak | Date | 25-05-2020 |
3 | 19-May-2020 | PostponedCritical dates due COVID-19 | Date | 01-06-2020 |
4 | 01-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-06-2020 |
5 | 03-Jun-2020 | Clarifying description of item no 147 of BOQ and other certain amendment of tender document. | Financial Bid | 08-06-2020 |
Nature of Work: SPL REPAIR OF BLDG NO SM – 17 (JOB NO – SR(BLDG)/05/18-19) AND BLDG NO MT-8 & 9 (JOB NO – SR(BLDG)02/19-20) AT INSIDE FORT UNDER GE(FW) KOLKATA | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.\n(ii) It is highlighted that the cretin condition of General Condition Of Contracts (IAFW-2249) has been modified as direction of MOD i.e inclusion of performance security, deletion of risk & cost provisions and increase in defects liability period all as specified in tender document. The tenderers should keep in mind while quoting their offer\n(iii) \nSCHEDULE 'A' PART - I FOR B/R PORTION (Sl No 02 to _____ )\n | |||
2 | 2 | Dismantling plain/corrugated steel sheeting, any guage, thickness including eves gutter / rain water pipe complete & removal all as specified | BI0201920E04C03R0I1001 | 100 | Sqm |
3 | 3 | Dismantling steel work including gates, rafter, purlin, roof truss etc complete all as specified & as directed. | BI0201920E04C03R0I1002 | 4.5 | Quintal |
4 | 4 | Dismantling timber scantlings under 40 sq. cm in section in framed work in fillets, rails, posts, rafters, purlins, etc. | BI0201920E04C03R0I1003 | 15 | RM |
5 | 5 | Material & labour of MS rolled sections as in in roof truss (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) and fixed with angle cleats, Fe-410-W(Gde-E 250) Quality A complete all as specified and as directed.\nNote:- The drawing of truss shall be approved by the GE prior to incorporation in the work. | BI0201920E04C03R0I1004 | 550 | Kg |
6 | 6 | Material & labour of Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290(Gde E-165) complete all as specified and as directed. | BI0201920E04C03R0I1005 | 11 | Kg |
7 | 7 | Material & labour of Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm and not exc 15 cm long, dia of neck 11 to 15 mm complete all as specified and as directed. | BI0201920E04C03R0I1006 | 2.5 | Kg |
8 | 8 | Supply and fixing of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and pitch length 75 mm c/c of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | BI0201920E04C03R0I1007 | 90 | Sqm |
9 | 9 | Supply and fixing of pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, tips, valley, gutters, length & girth as fixed with nail or screws complete all as specified and as directed. | BI0201920E04C03R0I1008 | 30 | Sqm |
10 | 10 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. | BI0201920E04C03R0I1009 | 5.5 | Cum |
11 | 11 | Material and labour for fly ash Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6complete all as specified and as directed. | BI0201920E04C03R0I1010 | 5 | Cum |
12 | 12 | Material and labour for fly ash brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed. | BI0201920E04C03R0I1011 | 4 | Sqm |
13 | 13 | Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting hold fasts of GI pipe and making good dismantled portion in cement concrete 1:2:4 type B1 exceeding one brick. | BI0201920E04C03R0I1012 | 10 | Each |
14 | 14 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified | BI0201920E04C03R0I1013 | 2 | Cum |
15 | 15 | Material and labour for reinforced Cement Concrete M-20 (Nominal mix) using 20 mm graded stone aggregate as in fins, fasica, louvres, parapeets, chajja etc complete all as specified and as directed . | BI0201920E04C03R0I1014 | 2 | Cum |
16 | 16 | Use and waste of formwork to soffits of fins, fasica, louvres, parapeets, chajja for fair finished surfaces of concrete complete all as specified and as directed . | BI0201920E04C03R0I1015 | 40 | Sqm |
17 | 17 | Material & labour of high strength steel Fe-500 TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. | BI0201920E04C03R0I1016 | 175 | Kg |
18 | 18 | High strength steel deformed TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel (annealed) wire not less than 0.90 mm dia | BI0201920E04C03R0I1017 | 25 | Kg |
19 | 19 | Demolition of cement concrete (un-reinforced) in ground floors, existing roof pading and paving not exceeding 15 cm thickness complete all as specified | BI0201920E04C03R0I1018 | 97.1 | Cum |
20 | 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed. | BI0201920E04C03R0I1019 | 305 | Sqm |
21 | 21 | Material & Labour of vitrified ceramic tiles,double charged dark coloured shade, 10 mm thick of square/rectangular area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick screed bed layer in CM (1:3)complete all as specified and as directed. | BI0201920E04C03R0I1020 | 180 | Sqm |
22 | 22 | Material & Labour of vitrified ceramic tiles,double charged dark coloured shade, 10 mm thick of square/rectangular area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete all as specified and as directed. | BI0201920E04C03R0I1021 | 20 | Sqm |
23 | 23 | Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 Sqm and not exceeding 0.18Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed. | BI0201920E04C03R0I1022 | 300 | Sqm |
24 | 24 | Material & Labour Glazed ceramic tiles 400x300x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed. | BI0201920E04C03R0I1023 | 100 | 70 |
25 | 25 | Material & Labour of 18mm thick granite slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite including grinding and polishing in vertical surface over 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed. | BI0201920E04C03R0I1024 | 30 | Sqm |
26 | 26 | Material & Labour of 18mm thick granite slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite including grinding and polishing in floor over 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed. | BI0201920E04C03R0I1025 | 5 | Sqm |
27 | 27 | Material & Labour of machine cut kota stone slab 20-25 mm thick as riser of step, skirting, dado etcover cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of slab iuncl rubbing and polishing over 10mm thick screed bed layer in CM (1:3) complete all as specified and as directed. | BI0201920E04C03R0I1026 | 45 | Sqm |
28 | 28 | Material & Labour of machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of slab iuncl rubbing and polishing over 15mm thick screed bed layer in CM (1:6) complete all as specified and as directed. | BI0201920E04C03R0I1027 | 5 | Sqm |
29 | 29 | Material and labour for 75 mm thick plain cement concrete M-7.5 (Nominal Mix) using 40 mm graded stone aggregate as in floor, finished fair and even as base complete all as specified and as directed. | BI0201920E04C03R0I1028 | 30 | Sqm |
30 | 30 | Material and labour for pre-polished chequered Cement Concrete tiles of 25 mm minimum thick, size of (square/ rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm double layer machine pressed set ( as per IS 1237-2012), jointed and pointed in neat cement slurry in floors and cut & polished in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. | BI0201920E04C03R0I1029 | 30 | Sqm |
31 | 31 | 50 mm thick plain cement concrete type B1 1:2:4 using 20 mm graded stone aggregate even and fair finished without using extra cement | BI0201920E04C03R0I1030 | 22 | Sqm |
32 | 32 | Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal outside of MOD land complete all as specified and as directed. | BI0201920E04C03R0I1031 | 2650 | Sqm |
33 | 33 | Material and labour for rendering 20 mm thick in CM 1:4 in two layers of 10mm thick each on exernal faces of brick/concrete surfaces and finishing the surface even and smooth without using extra cement and top layer of plaster shall be mixed with WPC as per manufacturer's instruction complete all as specified and as directed. Note:- WPC shall be measured and paid separately. | BI0201920E04C03R0I1032 | 1050 | Sqm |
34 | 34 | Material and labour for rendering 15 mm in Cement Mortar 1:6 in two layers on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface and top layer of plaster shall be mixed with WPC as per manufacturer's instruction ccomplete all as specified and as directed. Note:- WPC shall be measured and paid separately. | BI0201920E04C03R0I1033 | 1100 | Sqm |
35 | 35 | Supply only integral liquid water proofing compound | BI0201920E04C03R0I1034 | 138 | Litre |
36 | 36 | M&L rendering 10 mm thick in cm (1:3) on fair faces of concrete surface in ceiling and finishing the surface even and smooth with out using extra cement complete all as spd and directed | BI0201920E04C03R0I1035 | 50 | Sqm |
37 | 37 | Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight exceeding 4 Kg per Sqm | BI0201920E04C03R0I1036 | 610 | Kg |
38 | 38 | Material, labour and fixed of power coated aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum BULBED TEES section and aluminium angle of 25mm X25mm X1.5mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 6 mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking dwon existing false ceiling system complete all as specified and directed.\nMake (i) ALUMINUM SNAP GRID:- HINDALCO/ INDALCO/ JINDAL \n (ii) Non Asbestos Fibre Cement Board as per IS 14862:-ARMSTRONG/ SAINT GOBAIN (GYPROC)/EVEREST / VISAKA Industries Ltd | BI0201920E04C03R0I1037 | 115 | Sqm |
39 | 39 | Material and labour for Preparation of new plaster ceiling surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed. | BI0201920E04C03R0I1038 | 80 | Sqm |
40 | 40 | Material and labour for Preparation of new wall surface and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed. | BI0201920E04C03R0I1039 | 300 | Sqm |
41 | 41 | Material and labour for Preparation of new surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed. | BI0201920E04C03R0I1040 | 1050 | Sqm |
42 | 42 | Material and labour for complete removal of existing finishing of internal ceiling surface by mechanical appliance and preparation of old surfaces and applying two coats of acrylic washable distemper complete all as specified and directed. | BI0201920E04C03R0I1041 | 1200 | Sqm |
43 | 43 | Material and labour for preparation of old internal wall surface of building/structure and preparation of old surfaces and applying one coats of acrylic washable distemper over a coat of primer complete all as specified and directed. | BI0201920E04C03R0I1042 | 650 | Sqm |
44 | 44 | Material and labour for preparation of old internal ceiling surface of building/structure and preparation of old surfaces and applying one coats of acrylic washable distemper over a coat of primer complete all as specified and directed. | BI0201920E04C03R0I1043 | 150 | Sqm |
45 | 45 | Material and labour for preparation of new surfaces and 3 coats white wash on ceiling complete all as specified and as directed. | BI0201920E04C03R0I1044 | 50 | Sqm |
46 | 46 | Material and labour for preparation of old internal ceiling surfaces and applying a coats of white wash complete all as specified and directed. | BI0201920E04C03R0I1045 | 400 | Sqm |
47 | 47 | Material and labour for preparation of new wall surfaces and applying two coats of acrylic exterior weather resistant paint(weather proof paint) over a coat of acrylic primer as spcefid in clause No 17.17 of SSR Part-I 2009 complete all as specified and directed. | BI0201920E04C03R0I1046 | 1000 | Sqm |
48 | 48 | Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and preparation of old surfaces and and applying 2 coats of cement based paint over a coat of alkali based primer complete all as specified and directed. | BI0201920E04C03R0I1047 | 900 | Sqm |
49 | 49 | M & L for preparing newly plastered surfaces of wall & applying two coats of cement based paint over a coat of primer complete on compound wall all as spd and directed | BI0201920E04C03R0I1048 | 300 | Sqm |
50 | 50 | Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed.. | BI0201920E04C03R0I1049 | 230 | Sqm |
51 | 51 | Material and labour for preparation of old steel surface and applying one coats of synthetic enamel paint on old steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed. | BI0201920E04C03R0I1050 | 155 | Sqm |
52 | 52 | Material and labour for preparation of old wooden surfaces and appllied 1 coat of synthetic enamel paint on old wooden surfaces of any description over 10 cm in width or girth complete all as specified and as directed. | BI0201920E04C03R0I1051 | 40 | Sqm |
53 | 53 | Material and labour for Painting 2 coats of synthetic enamel paint on wooden surfaces of any description over 10 cm in width or girth including preparation new surface and one coat of pink primer complete all as specified and as directed. | BI0201920E04C03R0I1052 | 210 | Sqm |
54 | 54 | Material and labour for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, and treating end of posts, backs of chowkats etc., area treated exceeding 0.1 Sqm but not exceeding 0.50 Sqm each, of any description and girth, not otherwise described, with tar or coal tar black paint complete all as specified and as directed. | BI0201920E04C03R0I1053 | 0.34 | 100 Nos |
55 | 55 | Material and labour for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, and treating end of posts, backs of chowkats, holdfasts etc., area treated not exceeding 0.10 Sqm each, of any description and girth, not otherwise described, with tar or coal tar black paint complete all as specified and as directed. | BI0201920E04C03R0I1054 | 1.52 | 100 Nos |
56 | 56 | Material and labour of applying chloride free rust removing chemical on rusting structural member and removing all rust from steel surface member by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of steel surface member and application two component epoxy zinc-rich primer over treat steel surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 all as complete as per manufacturer's instruction as specified and as directed.\nMake( Rust removing chemical ):- Reebaklens RR for rust remover Nitozinc primer for primer of FOSROC or equivalents solutions SIKA/BASF/STP as approved by GE. | BI0201920E04C03R0I1055 | 100 | Sqm |
57 | 57 | Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed. | BI0201920E04C03R0I1056 | 34 | Each |
58 | 58 | Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. not exceeding 1.50 Sqm each complete all as specified and as directed. | BI0201920E04C03R0I1057 | 27 | Each |
59 | 59 | Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 125 x 60 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed. | BI0201920E04C03R0I1058 | 95 | RM |
60 | 60 | Material and labour for PCC 1:2:4 type B-1 using 20mm graded crushed aggregate as in filling in filling in pressed steel frame etc including necessary form work complete all as specified and directed. | BI0201920E04C03R0I1059 | 0.71 | Cum |
61 | 61 | Mild steel work as in clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165 | BI0201920E04C03R0I1060 | 30 | Kg |
62 | 62 | Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and comercial plywood face panels all complete all as specified and as directed. | BI0201920E04C03R0I1061 | 50 | Sqm |
63 | 63 | Material and labour for 35 mm thick, second class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats | BI0201920E04C03R0I1062 | 50 | Sqm |
64 | 64 | Supply and fixing of steel windows with side hung shutters including hinges projecting type with steel handle and steel peg stay complete with gauged bars, dovetailed or welded complete all as specified and as directed | BI0201920E04C03R0I1063 | 30 | Sqm |
65 | 65 | Supply and fixing of steel windows with side hung shutters including hinges projecting type with steel handle and steel peg stay complete without gauged bars, dovetailed or welded complete all as specified and as directed | BI0201920E04C03R0I1064 | 27 | Sqm |
66 | 66 | Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawingcomplete all as specified and directed. | BI0201920E04C03R0I1065 | 1.5 | Sqm |
67 | 67 | Material and labour for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild Steel square tube, suppling & fixing in opening as per drawing complete all as specified and directed. | BI0201920E04C03R0I1066 | 4.75 | RM |
68 | 68 | Supply and fixing Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Including taking down exsiting door/window fream with shutter complete all as specified and directed. | BI0201920E04C03R0I1067 | 58 | Kg |
69 | 69 | Material and labour for power coated anodised aluminium door shutters, aluminium section weighing 1.00 Kg/ m (minimum) thickness not less than 2.00 mm including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, floor hinges, anodised aluminum snap beading screws etc. Complete all as specified and as directed. | BI0201920E04C03R0I1068 | 18 | Sqm |
70 | 70 | Material and labour for power coated aluminium casement window and ventilator shutters, side hung type without sash bars, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m (minimum) and thickness of member/section not less than 1.50 mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.) suitable handle (1 No.) complete all as specified and as directed. | BI0201920E04C03R0I1069 | 28 | Sqm |
71 | 71 | Material and labour for 9 mm thick prelaminated particle board Gde I Type I having choice lamination on both sides complete all as specified and directed. | BI0201920E04C03R0I1070 | 10 | Sqm |
72 | 72 | Supply and fixing of Aluminiun alloy wire cloth, 0.45 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with aluminium wire staples | BI0201920E04C03R0I1071 | 18 | Sqm |
73 | 73 | Anodised aluminium grills (3.13 Kg per sqm min) with grill frame shall 0.297 kg/m (min) including necessary jointing cleats, anodised aluminium snap beading, screws etc. complete all as specified. | BI0201920E04C03R0I1072 | 56.3 | Kg |
74 | 74 | Materials and labour for Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including taking dwon old one complete all as specified and as directed. | BI0201920E04C03R0I1073 | 270 | Kg |
75 | 75 | Supply and fixing of Stainless steel wire cloth, 0.43 mm nominal dia of wire and avergae width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed. | BI0201920E04C03R0I1074 | 40 | Sqm |
76 | 76 | Supply and fixing in repair of Butt hinges Stainless steel 100 mm size complete all as specified and directed. | BI0201920E04C03R0I1075 | 18 | Each |
77 | 77 | Supply and fixing of Butt hinges Stainless steel 100 mm size complete all as specified and directed. | BI0201920E04C03R0I1076 | 102 | Each |
78 | 78 | Supply and fixing in repair of Butt hinges Stainless steel 50 mm size complete all as specified and directed. | BI0201920E04C03R0I1077 | 34 | Each |
79 | 79 | Supply and fixing in repair of stainless steel handles size of 200 mm decorative type fixed with desired shape stainless steel screw as directed | BI0201920E04C03R0I1078 | 8 | Each |
80 | 80 | Supply and fixing of stainless steel (Gr 304) handles size of 200 mm decorative type fixed with desired shape stainless steel screw as directed | BI0201920E04C03R0I1079 | 70 | Each |
81 | 81 | Supply and fixing in repair of Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed. | BI0201920E04C03R0I1080 | 4 | Each |
82 | 82 | Supply and fixing of Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed. | BI0201920E04C03R0I1081 | 34 | Each |
83 | 83 | Supply and fixing in repair of Aluminium anodised barrel tower bolts of extruded section size 200 mm complete all as specified and directed. | BI0201920E04C03R0I1082 | 10 | Each |
84 | 84 | Supply and fixing of Aluminium anodised barrel tower bolts of extruded section size 200 mm complete all as specified and directed. | BI0201920E04C03R0I1083 | 71 | Each |
85 | 85 | Supply and fixing of glazing with sheet glass 4 mm thick ordinary quality with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. | BI0201920E04C03R0I1084 | 69.3 | Sqm |
86 | 86 | Material and labour for 6.00 mm thick toughened glass for door shutter in square exc 0.5sqm in each pane complete all as specified and as directed. | BI0201920E04C03R0I1085 | 6 | Sqm |
87 | 87 | Material and labour for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing on vertical PVC fillet frame all as per specified on page no 162 of SSR Part-II complete all as specified and directed. | BI0201920E04C03R0I1086 | 140 | Sqm |
88 | 88 | Material and labour for 5mm thick PVC sheet fillet frame of width 35mm for wall paneling and fixing on to wall to make PVC Frame all as per specified on page no 162 of SSR Part-II complete all as specified and directed. | BI0201920E04C03R0I1087 | 455 | RM |
89 | 89 | Plain Cement Concrete M-15(Nominal Mix) using 20 mm graded stone aggregate as in coping, kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering slightly rounded or chamfered angles and throating as directed | BI0201920E04C03R0I1088 | 4.85 | Cum |
90 | 90 | Stripping out tarfelt from old roof surfaces and removing unserviceable materials from site of work in low laying in outside MOD area complete all as specified and as directed. | BI0201920E04C03R0I1089 | 1250 | Sqm |
91 | 91 | Material and labour forrendering 15 mm(Avg) thick in Cement Mortar 1:4 finished even and smooth witht using extra cement after preparation of old roof surface with brushing and applied neat cement slurry with 3.0 Kg of cement per Square Metre existing surface complete all as specified and as directed | BI0201920E04C03R0I1090 | 350 | Sqm |
92 | 92 | Material and labour for 30 mm(Avg) thick plain cement concrete M-15(Nominal Mix) using 12.5mm graded stone aggregate as in as base roof surface with suitable grading, finished even and smooth without using extra cement complete all as specified and as directed. | BI0201920E04C03R0I1091 | 900 | Sqm |
93 | 93 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 all complete complete all as specified and directed. | BI0201920E04C03R0I1092 | 10 | RM |
94 | 94 | Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3\t all complete complete all as specified and directed. | BI0201920E04C03R0I1093 | 90 | RM |
95 | 95 | Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed. | BI0201920E04C03R0I1094 | 1250 | Sqm |
96 | 96 | Plain Cement Concrete M-15(Nominal Mix) using 20 mm gaded stone aggregate as in surface channel & drain. | BI0201920E04C03R0I1095 | 0.5 | Cum |
97 | 97 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. | BI0201920E04C03R0I1096 | 10 | RM |
98 | 98 | Plain Cement Concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under, and haunching against the sides of pipes for 300mm bore RCC pipe. | BI0201920E04C03R0I1097 | 10 | RM |
99 | 99 | Reinforced Cement Concrete pipe of 300 mm dia class NP-2 laid and jointed and tested. | BI0201920E04C03R0I1098 | 10 | RM |
100 | 100 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth | BI0201920E04C03R0I1099 | 5 | RM |
101 | 101 | Supply and fixing of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed. | BI0201920E04C03R0I1100 | 20 | RM |
102 | 102 | Supply and fixing of 25mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed. | BI0201920E04C03R0I1101 | 25 | RM |
103 | 103 | Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed. Note for item no 101_ to 103:- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate. | BI0201920E04C03R0I1102 | 65 | RM |
104 | 104 | Supply and fixing in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified.\nMake :- Cat no F3002152 of CERA or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1103 | 7 | Each |
105 | 105 | Supply and fixing in repair of chromium plated pillar cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified.\nMake :- Cat no PIS 02 H of Prayag or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1104 | 3 | Each |
106 | 106 | Supply and fixing in repair of stop cock , concealed type cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified.\nMake :- Cat no F3002361 of CERA or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1105 | 7 | Each |
107 | 107 | Supply and fixing in repair of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified and as directed. | BI0201920E04C03R0I1106 | 1 | Each |
108 | 108 | Supply and fixing in repair of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 25 mm bore complete all as specified and as directed. | BI0201920E04C03R0I1107 | 4 | Each |
109 | 109 | Supply and fixing in repair of 125 mm dia of shower rose with 225 mm long arms, cast copper alloy chromium plated , swivel joints and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified.\nMake :- Cat no F7020305 of CERA or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1108 | 1 | Each |
110 | 110 | Supply and fixing of Unplasticized (uPVC )of type-A for use in ventilation pipe work and rain water and rain water harvesting, single socket, 160 mm bore in any length including rubber ring joints and fixed to walls with MS clamp , other standard material and including taking dwon old rain water pipe & removal from site all as specified in IS 13592 complete all as specified and directed. | BI0201920E04C03R0I1109 | 150 | RM |
111 | 111 | Supply and fixing of Unplasticized (uPVC )bendl for 160 mm bore uPVC pipe complete all as specified and directed. | BI0201920E04C03R0I1110 | 25 | Each |
112 | 112 | Supply and fixing of vitreous china wash basin white flat back, size 550 x 400 mm including CP waste coupling,with GI pipe brackets & , rag bolt in cement concrete/brick wall and including taking down existing HWB and making good wall surface complete all as specified and as directed.\nMake: Cat no S2040103 wash basin of CERA or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1111 | 3 | Each |
113 | 113 | Supply and fixing vitreous china urinal, bowl type, size of 440 mm x315 mm x 265 mm omplete incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified & directed.\n\nMake: CASEY of CERA or equivalent model of make list as given in PS as approved by GE." | BI0201920E04C03R0I1112 | 1 | Each |
114 | 114 | Supply and fixing of Vitreous china wash down water closet (pedestal pattern) with concealed S-trap or P-Trap, white, 390 mm high, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc and including taking down existing one complete all as specified and as directed\nMak:-SLICK of HINWARE or equivalent model of make list as given in PS as approved by GE." | BI0201920E04C03R0I1113 | 3 | Each |
115 | 115 | Supply and fixing as in repair of PVC low level flusing cistern 10 litres capacity white with ball valve & brackets with flush pipe complete all as specified and as directed.\nMake: CHIVAS of CERA or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1114 | 3 | Each |
116 | 116 | Cast iron cowl for 100 mm bore CI soil, waste and vent pipe | BI0201920E04C03R0I1115 | 3 | Each |
117 | 117 | Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. | BI0201920E04C03R0I1116 | 5 | Each |
118 | 118 | Material & labour of Cast iron soil, waste and vent pipe, spun pipe, 100 mm bore in any length with or without ears with cement joints fixed on walls and including taking down existing wast pipe line all as specified & directed. | BI0201920E04C03R0I1117 | 90 | RM |
119 | 119 | Material & labour of CI (Spun) bends for 100 mm bore pipe.(any storey) | BI0201920E04C03R0I1118 | 7 | Each |
120 | 120 | Material & labour of CI (Spun) (any radius) diminishing pieces or tapers 100 mm bore with heel rest complete all as specified and directed . | BI0201920E04C03R0I1119 | 6 | Each |
121 | 121 | Material & labour of CI (Spun) Branch pieces, double (equal or unequal) for 100 mm bore pipe with access doors. complete all as specified and directed . | BI0201920E04C03R0I1120 | 12 | Each |
122 | 122 | Material & labour of CI (Spun) branch pieces, single (equal or unequal) for 150 mm bore pipe complete all as specified and directed . | BI0201920E04C03R0I1121 | 3 | Each |
123 | 123 | Supply and fixing of PVC (SWR) floor trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified. | BI0201920E04C03R0I1122 | 4 | Each |
124 | 124 | Supply and fixing of CP waste coupling including 32mm bore PVC waste pipe (heavy duty) 90cm long complete all as specified and directed. | BI0201920E04C03R0I1123 | 1 | Each |
125 | 125 | Supply and fixing in repair of looking mirror of sixe 600mmx450mmx5mm thick bevelled edge of selected quality glass, over 6mm thick plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and as directed by Engineer-in-charge. | BI0201920E04C03R0I1124 | 1 | Each |
126 | 126 | Supply and fixing in repair of chromium plated waste coupling with wast pipe complete all as specified. | BI0201920E04C03R0I1125 | 1 | Each |
127 | 127 | Supply and fixing in repair of Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), bore dia of discharge pipe 32 mm complete all as specified. | BI0201920E04C03R0I1126 | 1 | Each |
128 | 128 | Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges | BI0201920E04C03R0I1127 | 1 | Each |
129 | 129 | Extra over cast iron pipes 100 mm bore and fittings if lead joint is provided in lieu of cement joint | BI0201920E04C03R0I1128 | 34 | Each |
130 | 130 | Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs , beams, columns ,lintel,chajja, fin , facia etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed. | BI0201920E04C03R0I1129 | 20 | Sqm |
131 | 131 | Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs ,lintel,chajja, fin , facia etc. 25 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed. | BI0201920E04C03R0I1130 | 80 | Sqm |
132 | 132 | Deduct / Add for below / over 5mm or part thereof thickness for item No ___ | BI0201920E04C03R0I1131 | 10 | Sqm |
133 | 133 | Material and labour for introducing new reinforcement bars above 12 mm dia for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed. | BI0201920E04C03R0I1132 | 30 | RM |
134 | 134 | Material and labour for introducing new reinforcement bars upto 12 mm dia for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed. | BI0201920E04C03R0I1133 | 15 | RM |
135 | 135 | Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitabletype formwork etc. as per manufacturers instruction complete all as specified and as directed..\nMake(micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE. | BI0201920E04C03R0I1134 | 20 | Sqm |
136 | 136 | Deduct / Add for below / over 5mm or part thereof thickness for item No ___ | BI0201920E04C03R0I1135 | 5 | Sqm |
137 | 137 | Supply, materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, slab & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed.(Any storey/ height of building/ structure)\nNote:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements .\nMake(polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE. | BI0201920E04C03R0I1136 | 80 | Sqm |
138 | 138 | Material , labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and as directed. (Any storey/ height of building/ structure)\nMake:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals. | BI0201920E04C03R0I1137 | 100 | Sqm |
139 | 139 | Supply and application cementitious grouting admixture with the cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a pressure grouting pump through non return PVC nozzles prefix with rapid setting cementitious plugging mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick-setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface, complete as per manufacturer's instruction as specified and as directed . (Any storey/ height of building/ structure)\nMake(Grouting admixture):- Cebex 100 of FOSROC or equivalents solutions SIKA/STP as approved by GE." | BI0201920E04C03R0I1138 | 100 | Per Nozzle |
140 | 140 | Cutting channels, grooves or rebates n. exc 15cm girth , and trimming surface with or without reinforcement cutting. | BI0201920E04C03R0I1139 | 110 | RM |
141 | 141 | Material , labour of treatment of existing wall surface with tartaric acid or oxalic acid to remove all the existing salt from the surface then rinse the entire wall surface and applying of 15 mm thick two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed\nMake(polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE. | BI0201920E04C03R0I1140 | 500 | Sqm |
142 | 142 | Up rooting of tree from walls of bldgs up to extranded root and spraying of Muratic Acid required quantity complete from any location of bldg up to ten stories and making good disturbed surface with cement mortar(1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate complete all as specified and directed.(Any storey) | BI0201920E04C03R0I1141 | 220 | Each |
143 | 143 | Cutting channels, grooves or rebates of 50 mm wide and girth not exceeding 15 cm and trimming surface in old brick masonary or concrete complete all as specified and as directed. | BI0201920E04C03R0I1142 | 290 | RM |
144 | 144 | Material and labour for Grouting with epoxy based polysulphide bonding agent till 15 mm from the inner grooved surface and furthur epoxy grouting to flush with the existing plastered surface, application rate of grouting 100 gm/RM after inserting 8 mm dia Stainless Steel helical rod of Fe 316 grade(Supply and fixing of rod to be measured and paid seperately under appropriate item)complete all as specified and directed. | BI0201920E04C03R0I1143 | 120 | KG |
145 | 145 | Material and labour for Grouting with epoxy based polysulphide bonding agent in cracks, application rate of grouting 200 gm/RMcomplete all as specified and directed. | BI0201920E04C03R0I1144 | 23 | KG |
146 | 146 | Supplyl and fixing Stainless Steel helical rod 8 mm dia, weighing not less than 0.42 kg/RM of grade SS-316 long as approved by GEcomplete all as specified and directed. | BI0201920E04C03R0I1145 | 204 | KG |
147 | 147 | Material and labour for Guiniting with cement mortar complete all as specified and as directed. | BI0201920E04C03R0I1146 | 8.5 | Cum |
148 | 148 | Subtotal of Sch A part-I | |||
149 | 149 | SCHEDULE 'A' PART - II FOR B/R PORTION (Sl No ____ to____ ) | |||
150 | 150 | Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and switch boxes etc complete and making good the disturbed surfaces all as directed by Engineer-in-Charge. | BI0201920E04C03R0I1147 | 282 | Point |
151 | 151 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for one light/fan point controlled by one switch. | BI0201920E04C03R0I1148 | 80 | Point |
152 | 152 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for modular one socket outlet 5 pin 6 amps on independent board complete all as specified and as directed. | BI0201920E04C03R0I1149 | 45 | Point |
153 | 153 | Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for modular one socket outlet 5 pin 16 amps on independent board complete all as specified and as directed. | BI0201920E04C03R0I1150 | 30 | Point |
154 | 154 | Material and labour for Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSH copper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly for one 5 amps socket outlet on same board with other switch complete all as specified and as directed.\nNOTES FOR ITEM NOS 151 to 154:- Flush steel terminal box, inner plate and front plates shall be measured and paid seperately. | BI0201920E04C03R0I1151 | 45 | Point |
155 | 155 | Material and labour for Metal flush box 3 modular complete all as specified and as directed. | BI0201920E04C03R0I1152 | 75 | Each |
156 | 156 | Material and labour for Metal flush box 4 modular complete all as specified and as directed. | BI0201920E04C03R0I1153 | 5 | Each |
157 | 157 | Material and labour for Metal flush box 6 modular complete all as specified and as directed. | BI0201920E04C03R0I1154 | 10 | Each |
158 | 158 | Metal flush box 8 modular . | BI0201920E04C03R0I1155 | 5 | Each |
159 | 159 | Supply and fixing modular metal flush box 12 module complete all as specified and as directed. | BI0201920E04C03R0I1156 | 5 | Each |
160 | 160 | Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 1 modular complete all as specified and as directed. | BI0201920E04C03R0I1157 | 75 | Each |
161 | 161 | Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 4 modular complete all as specified and as directed. | BI0201920E04C03R0I1158 | 5 | Each |
162 | 162 | Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 6 modular complete all as specified and as directed. | BI0201920E04C03R0I1159 | 10 | Each |
163 | 163 | White cover plate with frame (both ineer plate & outer plate cover) , 8 modular . | BI0201920E04C03R0I1160 | 5 | Each |
164 | 164 | White cover plate with frame (both ineer plate & outer plate cover) , 12 modular . | BI0201920E04C03R0I1161 | 5 | Each |
165 | 165 | Material and labour for Modular switch 6 Amp single pole one way complete all as specified and as directed. | BI0201920E04C03R0I1162 | 170 | Each |
166 | 166 | Material and labour for Modular switch 16 Amp single pole one way complete all as specified and as directed. | BI0201920E04C03R0I1163 | 30 | Each |
167 | 167 | Material and labour for Modular socket 16/6 Amp 3 pin combined shattered complete all as specified and as directed. | BI0201920E04C03R0I1164 | 30 | Each |
168 | 168 | Material and labour for Modular socket 6 Amp 2/3 pin combined shattered complete all as specified and as directed. | BI0201920E04C03R0I1165 | 90 | Each |
169 | 169 | Material and labour for Electronic type fan regulator step type 120 watt, 230 volt complete all as specified and as directed. | BI0201920E04C03R0I1166 | 20 | Each |
170 | 170 | Material and labour for Blanking plate SP with incoming contact complete all as specified and as directed. | BI0201920E04C03R0I1167 | 2 | Each |
171 | 171 | Material and labour for point wiring with PVC insulated unsheated stranded copper conductor cable of size 1.5 sq mm in and including PVC cassing caping of required width with all necessary fittings with sunk cast iron /pressed steel terminal box of1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete all as specified and directed by engineer incharge. | BI0201920E04C03R0I1168 | 30 | Point |
172 | 172 | All as per item No171 above but for one 5 amp socket independent | BI0201920E04C03R0I1169 | 36 | Point |
173 | 173 | All as per item No171 above but 3 pin 5 amps socket out let point and 5 amps light point with the same board with other suitable. | BI0201920E04C03R0I1170 | 6 | Point |
174 | 174 | Material and labour for point wiring with 2.5 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including double lock casing caping and accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet 6pin15/16 amps on independent board complete all as specified and directed. | BI0201920E04C03R0I1171 | 10 | Point |
175 | 175 | Supply and fixing of switch piano flush single pole one way 5 amps | BI0201920E04C03R0I1172 | 30 | Each |
176 | 176 | Supply and fixing switch socket outlet multipurpose 3 pin 15 Amps /5 Amps controlled by one switch. | BI0201920E04C03R0I1173 | 10 | Each |
177 | 177 | Supply and fixing of switch socket outlet 3 pin 6 Amps 230 volts flush type. | BI0201920E04C03R0I1174 | 42 | Each |
178 | 178 | Material and labour for Electronic type fan regulator step type 120 watt, 230 volt complete all as specified and as directed.\n Make : Code no 14502 of Anchor or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1175 | 10 | Each |
179 | 179 | Supply and fixing in repair for ceiling rose surface with ISI marked with valid CML no, three terminal complete all as specified and as directed. | BI0201920E04C03R0I1176 | 60 | Each |
180 | 180 | Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 4 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length and including taking out old DB complete all as specified and as directed. | BI0201920E04C03R0I1177 | 3 | Each |
181 | 181 | S&F in repair sheet metal enclosure for MCBs to be used singal pole & nutral double door 8 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length complete all as specified and as directed. | BI0201920E04C03R0I1178 | 8 | Each |
182 | 182 | Supply and fixing as in repair Sheet Metal enclosures for DB's for fixing of MCBs Tripal pole & nuteral points 4 way 415 Volts AC including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. | BI0201920E04C03R0I1179 | 4 | Each |
183 | 183 | Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed. | BI0201920E04C03R0I1180 | 42 | Each |
184 | 184 | Supply and fixing of MCB DP of rating 40-63 Amps 240 V complete all as specified and as directed. | BI0201920E04C03R0I1181 | 9 | Each |
185 | 185 | Supply and fixing MCBs four pole 63 Amps capacity complete all as specified and as directed. | BI0201920E04C03R0I1182 | 2 | Each |
186 | 186 | Supply and fixing ceiling fan enery saving and fancy type 1400 mm sweep three blade, , 50 watt maximum, 350 PRM (minimum), colour /white ,5 star BEE rating without regulator including hanging rod and including 0.75 Sqmm , 3 core PVC insulated Flexible copper cable for connection from ceiling rose to fan complete all as specified and as directed.\nMake: Model- ES-50 of Havells or equivalent model of BAJAJ/CROMPTON GREAVES/ORIENT/ALMONARD as approved by GE. | BI0201920E04C03R0I1183 | 20 | Each |
187 | 187 | Supply and Fixing industrial type exhust fan 240V, 300mm sweep, 900 RPM , MS body, highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings and conforming to IS: 2312 and including aluminium louers and shutters fixed to wall and 0.75 Sqmm , 3 core PVC insulated Flexible copper cable for connection from ceiling rose to fan complete all as specified and as directed.\nMake: Model- TURBO HEAVY DUTY of USHA or equivalent model of Havells/ BAJAJ/CROMPTON GREAVES/ORIENT/ALMONARD as approved by GE. | BI0201920E04C03R0I1184 | 3 | Each |
188 | 188 | Supply and Fixing wall mounting fan 400 mm sweep, 2000 rpm, heavy duty PP blade,fixed on wall including necessary connecting PVC insulated flexible cable complete all as specified.\nMake Havells/ BAJAJ/CROMPTON GREAVES/ORIENT/ALMONARD as approved by GE. | BI0201920E04C03R0I1185 | 9 | Each |
189 | 189 | Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 20Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified.\nMake : Model No for Batten BN 021 LED 20S 4000 PSU GRS1 of Phillips or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1186 | 42 | Each |
190 | 190 | Supply , Fixing & testing of Recessed/Surface LED ceiling light fitting 36 Watt of 600mm x 600 mm with LED lamp’s & driver and made of Metallic CRCA powder coated body with UV stabilized polycarbonate cover or toughen glass cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture including connection complete all as specified and directeddirected.\n Make : Model NoLCTLSN 36 CDL of Crompton Greaves or equivalent model of make list as given in PS as approved by GE. | BI0201920E04C03R0I1187 | 30 | Each |
191 | 191 | Supply and fixing of sub main wiring with two single core 4.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC double lock casing caping and accessories accessories including one single core 4.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed.\nNOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length."\n | BI0201920E04C03R0I1188 | 300 | RM |
192 | 192 | Supply and fixing of sub main wiring with two single core 6.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including one single core 6.0sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed.\nNOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.\n | BI0201920E04C03R0I1189 | 100 | RM |
193 | 193 | Supply and fixing of sub main wiring with four single core 6.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including two single core 6.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed.\nNOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.\n | BI0201920E04C03R0I1190 | 150 | RM |
194 | 194 | Material and labour for mild steel work as in MS pipe for hanging ceiling fan, fan hook, clamps etc conforming to Fe-290 Gde E-165 and making good the disturbed surfaces all as directed by Engineer-in-Charge. | BI0201920E04C03R0I1191 | 10 | Kg |
195 | 195 | Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ? ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail