}

Loharwadi Sub Center And Compound Wall Tal Newasa, AHMEDNAGAR-Maharashtra

Rural Development Department has published Loharwadi Sub Center And Compound Wall Tal Newasa. Submission Date for this Tender is 17-04-2020. Wall construction Tenders in AHMEDNAGAR Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

24140263
Loharwadi Sub Center And Compound Wall Tal Newasa
Open Tender
Indian
Maharashtra
AHMEDNAGAR
17-04-2020

Tender Details

Loharwadi Sub Center And Compound Wall Tal Newasa

Key Value

Document Fees
INR 5600 /-
EMD
INR 63567.0 /-
Tender Value
INR 63.56 Lakhs /-

BOQ Items

Name of Work :- Loharwadi Sub Center & COMPOUND WALL
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Item No. 1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 143.56 Cum
2 2 Item No. 2 :- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming\nwatering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means 15.12 Cum
3 3 Item No. 3 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area\ncovering 10 years guarantee on bond paper. 220.44 Sqm
4 4 Item No. 4 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 92.9 Cum
5 5 Item No. 5 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be\nprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 62.51 Cum
6 6 Item No. 6 :- Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them\nif special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and oneycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 9.47 Cum
7 7 Item No. 7 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 18.68 Cum
8 8 Item No. 8 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand 12.12 Cum
9 9 First Floor 6.89 Cum
10 10 Item No. 9 :-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand\nroughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 17.73 Cum
11 11 First Floor 9.47 Cum
12 12 Item No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 15.83 Cum
13 13 First Floor 14.33 Cum
14 14 Item No. 11 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 0.72 Cum
15 15 First Floor 0.38 Cum
16 16 Item No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / rushed sand VSI Grade finely washed etc) 1.73 Cum
17 17 First Floor 1.49 Cum
18 18 Item No. 13 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if\nspecial finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 0.8 Cum
19 19 First Floor 0.76 Cum
20 20 Item No. 14 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 5.84 M.T.
21 21 First Floor 2.83 M.T.
22 22 Item No. 15 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.\n 21.82 Cum
23 23 Item No. 16 :- Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 51.43 Cum
24 24 Item No. 17 :-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 43.66 Cum
25 25 First Floor 30.31 Cum
26 26 Item No. 18 :- Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 40.47 Sqm
27 27 First Floor 90.66 Cum
28 28 Item No. 19 :- Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per anufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. 1.05 Cum
29 29 First Floor 1.37 Cum
30 30 Item No. 20 :-Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface\nwith false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of\nRs. 500/- including ponding test etc. complete. 116.97 Sqm
31 31 Item No. 21 :- Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. 90.21 Sqm
32 32 First Floor 89.15 Sqm
33 33 Item No. 22 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. A) Internal cement plaster 12mm thk with neeru finish 190.06 Sqm
34 34 B) Internal cement plaster 12mm thk without neeru finish 77.66 Sqm
35 35 First Floor A) Internal cement plaster 12mm thk with neeru finish 145.58 Sqm
36 36 B) Internal cement plaster 12mm thk without neeru finish 25.2 Sqm
37 37 Item No. 23 :- Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 190.06 Sqm
38 38 First Floor 145.58 Sqm
39 39 Item No. 24 : Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. 30.6 Sqm
40 40 Item No. 25 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete 250.13 Sqm
41 41 First Floor 258.7 Sqm
42 42 Item No. 26 :- Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. 32.49 Sqm
43 43 First Floor 13.68 Sqm
44 44 Item No. 27 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring 72.1 Sqm
45 45 First Floor 92.49 Sqm
46 46 Item No. 28 :- Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish 14.61 Rmt.
47 47 First Floor 20.51 Rmt.
48 48 Item No.29. :-Providing and laying telephone black / Amba White /Cadburybrown / RBI red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. 17.5 Sqm
49 49 Item No. 30 :- Providing and fixing solid core flush door shutter in single leaf 32 mm thick ecorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 8.65 Sqm
50 50 First Floor 12.11 Sqm
51 51 Item No. 31 :- Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat\nmolded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the\ninterior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of egineerincharge ,manufacturer's specification anddrawing 4.7 Sqm
52 52 First Floor 6.26 Sqm
53 53 Item No. 32 :-Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap\nheaded rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).\n 10.71 Sqm
54 54 Item No. 33 :- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito\nnet shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box 13.32 Sqm
55 55 First Floor 14.4 Sqm
56 56 Item No. 34 :- Providing and fixing in position powder coated aluminium louvered windows / entilator of various sizes with powder coating as per detailed drawing and specifications ncluding aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers,f\napproved quality etc. complete. 2.16 Sqm
57 57 First Floor 2.16 Sqm
58 58 Item No. 35 :Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of nticorrosive paint and two coats of oil painting complete. 15.48 Sqm
59 59 First Floor 16.56 Sqm
60 60 Item No. 36 : Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) 18.35 Sqm
61 61 First Floor 4.35 Sqm
62 62 Item No. 37 :- Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. a) Marble other than white makraDeleted 22.92 Sqm
63 63 First Floor 24.88 Sqm
64 64 Item No. 38 :- Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 1.89 Sqm
65 65 First Floor 3.45 Sqm
66 66 Item No. 39 :-Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete 63.15 Sqm
67 67 Item No. 40 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry leaning curing etc. complete. 5.04 Sqm
68 68 First Floor 7.2 Sqm
69 69 Item No. 41 :- Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete 43.22 Sqm
70 70 First Floor 26.68 Sqm
71 71 Item No. 42 :-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.\n 250.13 Sqm
72 72 First Floor 258.7 Sqm
73 73 Item No. 43 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly leaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete 470.33 Sqm
74 74 First Floor 380.31 Sqm
75 75 Item No. 44 :- Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. excluding the primer coat)etc. complete 470.33 Sqm
76 76 First Floor 380.31 sqm
77 77 Item No. 45 :- Providing, laying and fixing P.V.C. pipe of mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) 15mm dia. UPVC Pipe 24 R.M.
78 78 B) 20mm dia. UPVC Pipe 24 R.M.
79 79 C) 25mm dia. UPVC Pipe 100 R.M.
80 80 First Floor A) 15mm dia. UPVC Pipe 24 R.M.
81 81 B) 20mm dia. UPVC Pipe 24 R.M.
82 82 C) 25mm dia. UPVC Pipe 24 R.M.
83 83 Item No. 46 :- Providing and fixing mm dia. screw down bib/ stop tap of brass\nincluding necessary socket union nut complete A)15 mm dia. stop tap 4 No.
84 84 B)20 mm dia. stop tap 2 No.
85 85 C)25 mm dia. stop tap 2 No.
86 86 First Floor A)15 mm dia. stop tap 4 No.
87 87 B)20 mm dia. stop tap 2 No.
88 88 C)25 mm dia. stop tap 2 No.
89 89 Item No. 47 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to estination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 4000 Lit.
90 90 Item No. 48 :- Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 2 No.
91 91 Item No. 49 :- Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100 mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc complete.\n 1 No.
92 92 First Floor 2 No.
93 93 Item No. 50 :- Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. 1 No.
94 94 Item No. 51 :- Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 4 No.
95 95 First Floor 2 No.
96 96 Item No. 52 :- Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps tc. complete.\n 24 Rmt.
97 97 Item No. 53 :- Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. 2.7 Cum
98 98 Item No. 54 :- Providing and fixing 10 cm PVC nahani trap with grating etc. complete. 4 No.
99 99 Item No. 55 :- Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100 kg etc. complete 3 No.
100 100 Item No. 56 :-Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 2 No.
101 101 Item No. 57 :- Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete A) 75mm UPVC pipe 15 R.M.
102 102 B) 110mm UPVC pipe 15 R.M.
103 103 First Floor A) 75mm UPVC pipe 15 R.M.
104 104 B) 110mm UPVC pipe 15 R.M.
105 105 Item No. 58 :-Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. 17.23 Sqm
106 106 Item No. 59 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 1.35 No.
107 107 Item No. 60 :- Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm.height letter,igures including painting the lefters/figures with approved colour and shade complete 1.5 Sqm
108 108 Item no.61 : - Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and\ncleaning etc. complete. (using 100% crushed sand) 522.33 Sqm
109 109 Item no.62 :- Supplying and erecting and giving test of Centrifugal Monoblock Pumpset RPM with CI impeller, primping funnel , cock and companin flanges with nuts and bolts and mounted on a comman shaft of high efficient squirrel cage induction moter totaly enclosed and fan cooled type sutable to oprate on 230 V single phase 50 cys A.C. supply of 0.5 (1/2) H.P. with minimum / maximum discharge liters per seconds (LPS) for minium / maximum head / mtrs and suction / dilivery pipe of size mm with nut duly grouted in provided C.C foundation and bolts , spring washers of requisite size monoblock moter and pump.(IS 9079) Elec. DSR I no. (898) 12 - 1 - 1 , P. no.129 1 H.P.
110 110 Item No. 63:- Quality Control Charges as per testing frequency chart. Concrete=\nA) Concrete Cube Cmpresive strength 5 Test
111 111 Cement =\nB) Finess Consistancy/seating Time, Compressive strength,Specific gravity 1 Test
112 112 Steel =\n C) Yeild stress,Ultimate tensile stress,Elongation Wt.per running meter 4 Test
113 113 Above 16 mm (Set of 3 bars) 1 Test
114 114 Sand= \nD) Finess Modulus,Silt Content 1 Test
115 115 Brick = \nE) Crushing Value(Set of 5 brick) water absorption(set of 5 brick) Efforesences(Set of 5 Bricks) 1 Test
116 116 F ) Ceramic/Vetrified Tiles/ Pavings Blocks= Fluxtural Strength,Water absoption,Resistant to water 1 Test
117 117 Item no.1 : -Excavation for foundation in earth, soil of all types sand, gravel and soft murum, removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for foundation and necessary back filling, ramming, watering (including shoring and strutting) complete. (Bd.A.1 page no.259) 75.6 Cum
118 118 Item no.2 : - Providing dry trap stone solling 15 cm to 20 cm thick including hand packing and compacting compete. (Bd.A.12/P.264) 15.12 Cum
119 119 Item No. 3 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be\nprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 7.56 Cum
120 120 Item No. 4 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 8.51 Cum
121 121 Item No. 5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand 4.07 Cum
122 122 Item No.6 :-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand\nroughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 6.5 Cum
123 123 Item no.7:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (From integrated plant) (Spec.No.Bd.F.17/Page No.306) 1.92 M.T.
124 124 Item no. 8 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in Superstructure including striking joints on unexposed faces, racking out joints on exposed faces and watering and scaffolding complete. (Spec.No.Bd.G.5/Page No.315) 34.66 Cum
125 125 Item no.9 :-Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special inish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden\ncentering will not be allowed.) 4.98 Cum
126 126 Item no.10 :-Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surface, in all position including scaffolding and curing complete.(Spec.No.Bd.L 2/ Page No.368 ) (Spec.No.Bd.L 10/ Page No.370) 202.42 Sqm
127 127 Item no.11 :- Providing internal cement plaster 20mm thick in two coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. 202.42 Sqm
128 128 Item no.12 :-Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete 112.5 Sqm
129 129 Item no.13 :-Providing and applying two coats of water proof cement paint of approved manufacture and approved colour to the plastered surface incl. preparing the surface, scaffolding if necessary, watering for two days complete. (Spec.No.Bd.O.8/Page No.406) 404.84 Sqm
130 131 Item No.15 :- Testing charges of Material. A) CC M10/ CC M20 Cube 1 Test
131 132 B) Bricks for Superstructure 1 Test
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail