Delhi Jal Board-DJB has published S/I/T/C Of Newly Bored Tube-Wells And Other Allied E&M Works At Bhoomiheen Camp & Navjeevan Camp Ravidas Marg In Kalkaji Constituency (Ac-51). Submission Date for this Tender is 07-04-2020. Electromechanical Work Tenders in Work Delhi. Bidders can get complete Tender details and download the document.
Name of Work: S/I/T/C of newly bored tube-wells and other allied E&M works at Bhoomiheen camp & Navjeevan camp Ravidas Marg in Kalkaji Constituency (AC-51) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1.01 | S/I/T/C of newly bored tube-wells and other allied E&M works at Bhoomiheen camp & Navjeevan camp Ravidas Marg in Kalkaji Constituency (AC-51) in Kalkaji Constituency (AC-51) carried out by following works as under:- S/o. Sub. P/Set for deep bore wells of 7.5 HP with dynamically balanced motor, vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable to operate on 3 Phase 415 Volt 50 Hz, A.C. supply. Head in meters app. – 95 - 44, Discharge in LPM: 240 - 420 Method of starting – Star Delta Delivery Size – 50 mm Make – BS/ SU/ KSB/ /Mody/ABS/Great Ind/Skope/Lubi/CGL/KBL. | item1 | 4 | Nos. |
2 | 1.02 | P/o Hut type electrical feeder pillar of size 1370mm x 760mm x 460mm, fabricated with 50mm x 50mm x6mm angle Iron and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size. The feeder pillar panel shall be mounted on the suitable base frame made out of 50x50x6mm angle iron with arrangement for mounting electrical energy meter, Switch-gears i/c painting having following items. (1) Main Switch 63 Amp TPN, 415 Volt Make: Havells/Bentex/capital (2) Fully automatic Star Delta Starter of 3 Phase oil immersed type suitable for 10 HP rating pump set. Make – Capital/Bentex/ Adavance (3) Ampere meter 96mmx96mm square shape of 0-30 Amp range. Make: A.E/Bentex/Capital (4) Voltmeter of 96mm x 96 mm square shape of 0-500 Volt range. Make: A.E/Bentex/Capital (5) MPP type Shunt capacitor (Heavy duty) 5 kVAR. Make: Epcos/L&T/Havells (6) LED Indicating lamps with fitting (a set of 3 lamps) Make: - Vaishnao/L&T/Havells (7) Selector switch for Voltmeter. Make - Vaishno/L&T (8) Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 10 HP. Make: C&S/L&T/Schiender/ABB/Gain guard/skope (9) Complete wiring of feeder pillar panel & installation of electrical accessories like main switch, starter, ampere meter, voltmeter, shunt capacitor, selector swtch, indicating lamps etc as required in the panel with copper conductor wire & thimbling etc at site required. | item2 | 2 | Nos. |
3 | 1.03 | P/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 cores 4 sq. mm size for submersible motor. (Each roll of 100 mtrs.) Make:- Finolex/Havells/Grandley/National | item3 | 4 | Roll |
4 | 1.04 | P/o M.S. clamp of 600 mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia. | item4 | 2 | Nos. |
5 | 1.05 | Providing of double flange G.I. column pipe 50 mm dia., medium class, each of 3 mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends welded with three nos. support strip at each end between flange and pipe, withtwo slots for sub cable in each flange. Make of pipe: TATA/Jindal. | item5 | 70 | Nos. |
6 | 1.06 | Providing of tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50mm dia. Make of pipe: TATA/Jindal | item6 | 2 | Nos. |
7 | 1.07 | Providing G.I.900 x 50mm dia. bend having flange at both ends (Heavy duty). | item7 | 2 | Nos. |
8 | 1.08 | Providng of MS full threaded Nut bolts off sizes as per site requirement. | item8 | 20 | Kgs |
9 | 1.09 | Providing of Rubber packing for 50mm dia. Flange | item9 | 50 | Nos. |
10 | 1.1 | Providing of Starter Oil/Transformer Oil Make:- Savita/Power/Bentex/Capital | item10 | 10 | Ltrs. |
11 | 1.11 | Providing of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nuts & bolt. | item11 | 2 | Sets |
12 | 1.12 | Providing of CI D/F non return valve of size 50mm dia.,as per IS 5312(part 1&2)PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Hinge Pin Construction Make: IVC/Kirloskar | item12 | 2 | Nos. |
13 | 1.13 | Installation of t/well by lowering of sub p/set with all allied above items. This includes installation and grouting of panel board with all electrical wiring & cabling at site. All tools & tackles i/c tripod chain pulley blocks etc. shall be arranged by the firm. This includes testing & commissioning of t/well on load at site i/c cartage, loading & unloading of material. It also includes trial run of 100 hrs operation successfully by the firm. All required civil work included in the scope of work. | item13 | 2 | Jobs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail