}

Annual Maintenance And Repair Of 400 Kv Substation Pali Greater Noida, GREATER NOIDA-Uttar Pradesh

Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Annual Maintenance And Repair Of 400 Kv Substation Pali Greater Noida. Submission Date for this Tender is 21-04-2020. Substation Tenders in GREATER NOIDA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

24128362
Annual Maintenance And Repair Of 400 Kv Substation Pali Greater Noida
Open Tender
Indian
Uttar Pradesh
GREATER NOIDA
21-04-2020

Tender Details

Annual Maintenance And Repair Of 400 Kv Substation Pali Greater Noida

Key Value

Document Fees
INR 590 /-
EMD
INR 4000.0 /-
Tender Value
INR 1.99 Lakhs /-

BOQ Items

Name of Work:- Annual M&R of 400 KV S/S Pali Greater Noida
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 Metre and lead upto 30 metre and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation. 4.01 60 Cum
2 2 Cutting or filling undulated land for proper leveling and dressing the area including cutting and filling the earth upto 100mm depth if required and as per direction of E/I, complete with all material, labour and T&P etc. required for proper completion of work. 4.07 80 Sqm
3 3 Local fine sand of 1.25 F.M. fillin in plinth including supply of necessary quantity of sand from a river/canal nearest to the site of work including watering, ramming and dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. 4.08 3 Cum
4 4 Clearing Jungle including uprooting of rank vegetations, grass, bush wood, trees and saplings of girth upto 20 cm measured at a height of one meter above ground level and removal of rubbish upto a distance of 50 meters outside the periphery of area cleared. 4.09 250 Sqm
5 5 Providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 Liters/Sqm of the vertical surface of the sub structure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete chlorpyrifose/lindane E.C. 20% with 1% concentration as per I.S. 6361 (Part III-2001) revised with latest amendment and direction of E/I including cost of chemical, labour T&P required for proper completion of work. 4.13 100 Rm
6 6 Concrete with 4cm gauge down graded Stone ballast , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundation and under floors and supply of all materials, labour, tools and plants etc. required for proper completion of the work. 5.01 3 Cum
7 7 Cement concrete with 2cm gauge Stone ballast, coarse sand and cement in the proportion 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. \n 5.03 2 Cum
8 8 Precast cement concrete door sills, Chaukhats, boudary posts, shelves and similar small work with cement, approved coarse sand and 20 mm gaude down graded stone ballast in proportion fo 1:2:4 excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. binding wire including the cost of binding wire, moulds and all other materials, labour and T&P etc. required for proper completion of the work 5.05 1 Cum
9 9 RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:2:4 in the lintels or bends and sun shade of doors and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. 5.07 0.25 Cum
10 10 Placing & fixing of precast items such as shelves, blocks etc. In line and level as per direction of E/L, including cost of labour and T&P etc. required for proper completion of work. 5.24 2 Sqm
11 11 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. 6.01 0.5 Cum
12 12 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work for 230 mm thick wall including supply of all material, labour and T&P etc. required for proper completion of work. 6.01 + 6.06 0.05 Cum
13 13 Add for extra labour in item no.6.01to 6.04 as above but for wall of half brick 4.5” (115mm) thick in super structure. 6.07 0.5 Cum
14 14 S/F of Malayshian sal/ MARANDI / CHIR WOOD frames of door, window, ventilators, etc. and fixing the same in proper position and alignment including simple moulding and straight line work as per direction of E/I including cost of all material, labour and T&P required for proper completion of work. 8.01A 0.01 Cum
15 15 Supply and fixing of 35mm thick U.P. teak wood door and windows shutters with panels of heavy quality Stainless Steel. wire mesh of 15x28 G with necessary teak wood beading in required shape and size including supply and fixing of wooden cleats and stoppers in specified size & necessary screws etc. including cost of all materials, labour and T&P. required for proper completion of the work. 8.12 1 Sqm
16 16 Supply and fixing Stainless Steel. Mosquito proof heavy quality iron wire mesh of 15x25 G over windows and including suppy of Malaysian Sal wood battens (40x15) mm size and including supply and fixing of necessary screws all materials, labour and T&P required for proper completion of the work 8.16 A 1 Sqm
17 17 Supply and fixing of chromium polished iron fitting with screws for doors and windows etc.\n(a) L-Drop 16 mm dia 12" long 8.17 (a) 1 Each
18 18 (b) L-Drop 16 mm dia 10" long 8.17 (b) 1 Each
19 19 (c) L-Drop 12mm dia 8" long 8.17(c) 1 Each
20 20 (d) Tower bolt 10" long 8.17(d) 1 Each
21 21 (e) Tower bolt 8" long 8.17(e) 1 Each
22 22 (f) Tower bolt 6" long 8.17(f) 1 Each
23 23 (g) Handle 6" long 8.17(g) 1 Each
24 24 (h) Handle 4" long 8.17(h) 1 Each
25 25 (i) M.S Hinges 5" long 8.17(i) 1 Each
26 26 (j) M.S Hinges 4" long 8.17(j) 1 Each
27 27 (k) Stopper with rubber pad 8.17k 1 Each
28 28 (l) Plastic/rubber cleat 8.17i 1 Each
29 29 Supply and fixing of single leaf flush doors commercial quality conforming to I.S. 2202 part-I (1983) including fixing of wooden cleats and stoppers including cost of all materials labour, & T&P etc. required for the proper completion of the work. (b) 32 mm thick 8.24 B 1 Sqm
30 30 Providing and fixing 19 mm thick ply board/block board for wardrobe shutter etc. of Reliance or Scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluidng their supply and including cost of all material labour, T&P etc. required for the proper completion of the work. 8.25 1 Sqm
31 31 Providing and fixing of (25x10) mm size tapered shape teak wood beading of approved design and fixing with nails and screw as directed by E/I including cost of all material labour, T&P etc required for proper completion of work. 8.26 10 rm
32 32 Provding and fixing of Double Action floor spring of approved quality and make as per approved sample including cutting in floors and R.C.C. slab and grouting the same with CC & finishing the surface properly as and where required under AIuminium. doors as per direction of Engineer in charge. The rate includes all labour, material & T&P etc. required for proper completion of work. 8.34 1 No
33 33 Mild steel or iron work in heavy small section like (J/U) hooks, holding down bolts, hold fast, tie rod, record recks, door/window frame, trench recks & edges, angle post etc. (when not included in overall rates) wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. 9.01 0.02 M.T.
34 34 Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. 9.02 0.02 M.T.
35 35 Mild steel or iron work in heavy large size sections such as trusses, built-up gates, roof work, window/boundry grill or railing, trench covers, grating, T/F rail etc. wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing charges, welding, required for proper completion of the work. (in case the steel supplied by department free of cost.) 9.02A 0.01 M.T.
36 36 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks, and authorized overlapping as required for proper completion of the work. 9.04 0.02 M.T.
37 37 Supply and Fixing galvanized corrugated iron roofing 24 B.W.G. in position including supply of all material, labour and T&P etc. required for proper completion of work and including wastage. 10.01 2 sqm
38 38 P/F Chicken Mesh of 22 gauge and 20 mm Hexagonal size over roof/wall in cement concrete/Mortar with 10 cm. over lapping with the help of U nails. as per direction of E/I. including cost of all materials, labour T&P etc. required for proper completion of work. \n\n 10.1 10 M.T.
39 39 12mm thick plaster with cement mortar of 1 part cement & 4 parts of approved coarse sand 2.5 F.M. over Brick work, min. thickness not less than 10mm including supply all material, labour and T&P required for proper completion of work. 11.05 10 Sqm.
40 40 Rendering, smoothening and proper finishing with cement mortar/slurry (mortar 1:2 cement and coarse sand) in horizontal and vertical surface of foundations/roof etc. as per direction of E/I inclduing supply of all material labour and T&P etc. required for proper completion of wrok. 11.16 5 Sqm.
41 41 3 mm thick neat cement floating coat inclduing cost of all material labour and T&P etc. required for proper completion of the work. 11.17 5 Sqm
42 42 25mm thick 1:2:4 cement concrete floor with cement, approved coarse sand and 20mm graded stone aggregate laid in panels finished with 3mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work but excluding cost of base concrete. 12.01 5 Sqm
43 43 40 mm thick 1:2:4 cement concrete floor with cement, approved coarse sand and 20mm graded stone aggregate laid in panels finished with 3mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work but excluding cost of base concrete. 12.02 5 Sqm
44 44 First class brick on edge floor-laid in cement mortar consisting of one part of cement and six parts of coarse sand struck pionted with cement mortar in 1:2 mortar including cost of all material, labour T&P etc. required for proper completion of the work. 12.03 5 Sqm
45 45 S/F 8 mm thick glazed/matt finish tiles SOMANI or equivalent approved quality and size upto 400x400 in floor, skirting or dado laid with 1:3 cement and coarse sand mortar and joints finished with white cement including polishing etc. complete including supply of all materials, labour and T&P etc. required for proper completion of work. 12.07 2 Sqm
46 46 Providing and fixing glass strip of 3.15 mm (1/8”) thick and 2.5cm. deep in joints of floor at the time of laying floors flush with floor level including supply of all materials, labour and T&P etc. required for proper completion of the work. 12.08 10 rm
47 47 Providing and fixing glass strip of 3.15 mm (1/8”) thick and 3.5cm. deep in joints of floor at the time of laying floors flush with floor level including supply of all materials, labour and T&P etc. required for proper completion of the work. 12.09 2 Sqm
48 48 S/F 10mm thick glazed/matt finish Standered quality Vitrified tiles of size 600x600 or more of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by E/I in floor, skirting or dado laid with 1:3 cement and coarse sand mortar, finished with white cement and pigment to match the tiles shade etc.complete including supply of all materials, labour and T&P etc. required for proper completion of work. 12.11 1 Sqm
49 49 Providing and fixing 18mm thick polished BARODA GREEN Stone of approved shade and pattern in floor or on top of Kitchen slab etc. laid with 1:3 cement and coarse sand mortar and jointing with white cement mixed with pigment to match the shade including supply of all materials, labour and T&P etc. required for proper completion of work. 12.14 1 Sqm
50 50 Painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. 13.01 4 Sqm
51 51 Painting or varnishing on iron works in small areas or wood work with every coat after Ist coat of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. 13.02 4 Sqm
52 52 Painting or varnishing on iron works in small areas or wood work with every coat on previously painted old wood or steel work of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no. 103-1950. 13.03 20 Sqm
53 53 Applying BIRLA PUTTY or equivalent putty on OLD interior or exterior surface after cleaning the old painted surface as per requirement and direction of E/I, including cost of all material, labour and T&P required for proper completion of work. 13.05 10 Sqm
54 54 Finishing walls with water proof exterior emulsion paint of APEX ULTIMA (ASIAN)/Weather Shield Max (ICI) or equivalent brand on already well prepared new wall surfaces over one coat of under coat primer (ICI) followed by One coat at Apex/Weather shield Max emulsion paint to give an even shade including thorough washing with water as per direction E/I including cost of all material labour & T&P required for proper completion of work. 13.06 5 Sqm
55 55 Finishing walls with water proof exterior emulsion paint of APEX ULTIMA (ASIAN)/Weather Shield Max (ICI) or equivalent brand on already well prepared new wall surfaces for every additional coat of Apex/Weather shield Max emulsion paint to give an even shade including thorough washing with water as per direction E/I including cost of all material labour & T&P required for proper completion of work. 13.07 5 Sqm
56 56 Same as above item no.13.07 but for each coat of water proof exterior emulsion of approved brand on old surface including cleaning the same before applying emulsion complete. 13.08 5 Sqm
57 57 One priming coat & one coat synthetic/acrelic distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. 13.09 5 Sqm
58 58 As in item no. 13.09 above but for every coat after the first coat. 13.1 5 Sqm
59 59 As in item no. 13.10 above but for every coat on previously old distempered surface. 13.11 10 Sqm
60 60 Finishing exterior walls with two coat of water proof cement paint of approved quality like snowcem plus on new surface with this paint to give an even shade and finishing including supply of all materials, labour and T&P etc. required for proper completion of the work. 13.12 10 Sqm
61 61 Finishing walls with additional each coat of water proof cement paint of approved quality on painted surface with this paint to give an even shade including supply of all materials, labour and T&P etc. required for proper completion of the work. 13.13 10 Sqm
62 62 Finishing walls with one coat of water proof cement paint of approved quality like snowcem plus on previously old treated surface with this paint to give an even shade including supply of all materials, labour and T&P etc. required for proper completion of the work. . 13.14 10 Sqm
63 63 Two coat white washing on newly plastered surface including cost of all material, labour and T&P etc. required for proper complete of work. 14.02 100 Sqm
64 64 Two coat colour washing using approved colour of approved shade as per sample including supply of all materials, labour and T&P etc. required for proper completion of the work. 14.05 100 sqm
65 65 One coat cement washing with slack lime in ratio 1:2 (cement : lime) with pigment of approved shade if required including supply of all material labour and T&P etc. required for proper completion of work. 14.06 5 Sqm
66 66 Same as in item no.14.06 but for every coat after first coat. 14.07 5 Sqm
67 67 Dismantling plastered or unplastered brick work or stone masonry work in lime or cement mortar and inclduing stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. 15.01 0.5 Cum
68 68 Dismantling reinforced cement concrete or reinforced brick work or Cement Concrete including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 metres. 15.02 1 Cum
69 69 Dismantling cement concrete or brick or granolithic floor, inclduing base concrete as and where required including stacking of dismantled material as directed by Engineer-in-charge within a distance of 60 meters. 15.03 2 Sqm
70 70 Dismantling or taking out doors or windows leaves including stacking og materials as directed by Engineer-in-charge within a distance of 60 meter 15.05 2 Sqm
71 71 Dismantling W.C. pan of all size Indain type, Orissa pan or European type including dismantling of floor or wall as required and also including disposal of refuse including cost of all labaour and T&P requried for proper completion of the work 15.08 1 Job
72 72 Brick soling with first class brick laid with brick on edge. including preparation of sub grade to prescribed camber and including supply of birck filling joints with fine sand by spreading and blinding over entire surface of brick soling as per direction of E/I including cost of material, labour and T&P etc. required for proper completion of work. 17.03 4 Sqm
73 73 Providing and Laying 80 mm thick factory made Interlocking CC tile M-25 grade over prepared subgrade with 50 mm thick fine sand layer making joints filled properly and finished in proper level and alignment including cost of all material, labour and T&P required for proper completion of work as per direction of E/I. 17.13 2 Sqm
74 74 Repair of plaster in patches upto one sqm. area including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. Depth, watering the area and then replastering of mix 1:4 cement and coarse sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of the work. 22.01 3 Sqm
75 75 Repair to 2.5 cm . thick cement concrete floor in patches consisting of one part cement, 2 parts approved coarse sand and 4 parts of 12 mm down graded approved stone grit adding concrete hardner of approved make in specified proportion or as directed by E/I and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of the work. 22.02 3 Sqm
76 76 Dismentalling and resoling brick on edge / intrlocking tile floor with existing old bricks/tile laid dry joints filled with sand including preparation of base to proper slope and camber, its ramming including supply of labour, T&P etc. (Labour only) 22.03 3 Sqm
77 77 Brick work with old or dismantled bricks in 1:6 cement and coarse sand mortar in (230mm) thick wall in foundation and other place including cost of all materials, labour and T&P etc. required for proper completion of work. 22.04 0.5 Cum
78 78 Supply and fixing 4 mm thick glass panes with putty & brads of approved make and quality as per sample including supply of all materials, labour and T&P etc. required for proper completion of the work . 22.06 1 Sqm
79 79 Replacing and fixing new galvanized mosquito proof heavy quality iron wire mesh (16x24) gauge over door/window with old beading and including supply and fixing necessary screws/nails and all material, labour and T&P etc. required for proper completion of work. 22.1 2 Sqm
80 80 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(A) L drops 16mm dia x 300/200 mm long 22.11 A 1 Each
81 81 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(B) Tower bolts 200 mm long 22.11 B 1 Each
82 82 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(C) Tower bolts 150mm long 22.11 C 1 Each
83 83 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(D) G.I. hinges 100mm to 150 mm long 22.11 D 1 Each
84 84 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(E) Iron door spring 22.11 E 1 Each
85 85 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(F) M.S. Handle 100mm size to 150mm size 22.11 F 1 Each
86 86 Providing and replacing of following oxidized iron fittings of approved make and as per sample approved by E/I including cost of nuts, bolts and screw etc. complete.\n(G) M.S. Chain kunda 22.11 G 1 Each
87 87 Scrapping and cleaning old white wash, colour wash, cement wash or snowcem etc. with wire brush, sand paper etc. including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metres including cost of all labour, T&P etc. required for proper completion of work. 22.16 76 Sqm
88 88 Thorough cleaning of septic tank with sludge pump including disposal of waste outside the corporation area including removing septic tank cover and refixing cover in its position as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of work. 22.19 2 Each
89 89 Thorough cleaning of Inspection Chamber with sludge pump including disposal of waste outside the corporation area including removing cover and refixing cover in its position as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of work but for inspection chamber. 22.2 6 Each
90 90 Thorough cleaning of main drain of depth upto 300 mm including disposal of waste, refuse, sludge, outside the Corporation area including its washing and cleaning by clean water completely. 22.21 150 RM
91 91 Disposal of rubbish/debris outside the corporation area as per direction of Engineer in-charge including cartage labour and T&P etc. required for proper completion of the work. 22.22 5 Per Cart
92 92 Providing & Replacing of 110 mm dia PVC pipe (6 Kg/Sq.cm.) with PVC clamp of approved make, Prakash or equivalent make as per sample approved by E/I for rain water including cost of all materials, labour and T&P etc. required for proper completion of work. 22.24 5 RM
93 93 Providing and replacing of 15 mm dia G.I. Tee/socket/elbow/ bend approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 22.25 10 Each
94 94 Providing and replacing of G.I. Reducing socket (20x15) mm size approved make and as per sample approved by E/I and including cost of all materials, labour and T&P etc. required for proper completion of work. 22.26 5 Each
95 95 Providing & Replacing of 15 mm dia G.I. union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. required for proper completion of work. 22.3 5 Each
96 96 Providing & Replacing of 32 mm dia C.P. brass /SS waste of approved make and as per sample approved by E/I for wash hand basin/sink of standard pattern with check nut including cost of all materials, labour and T&P etc. required for proper completion of work. 22.34 2 Each
97 97 Providing & Replacing C.P. brass/ SS jali for nahani trap as per sample approved by E/I including cost of all materials, labour and T&P etc. required for proper completion of work. 22.35 5 Each
98 98 Cleaning of existing water supply pipe line of different dia ranging from 50 mm to 100 mm dia including digging trench and opening of pipes thorough cleaning of pipes, cutting, threading if required fixing and refilling of digged trenches including making good the road as directed by the Engineer-in-charge including supply of all labour and T&P etc. required for proper completion of the work. 22.36 5 RM
99 99 Cleaning of existing water supply pipe line of different dia ranging up to 50 mm dia including digging trench and opening of pipes thorough cleaning of pipes, cutting, threading if required fixing and refilling of digged trenches including making good the road as directed by the Engineer-in-charge including supply of all labour and T&P etc. required for proper completion of the work. 22.37 8 RM
100 100 Thorough cleaning of RCC OHT Tank up to capacity of 100 KL with bleaching powder and rubbing inside surface of OHT with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. 22.38 1 Job
101 101 Thorough cleaning of PVC Tank with bleaching powder and rubbing inside surface of OHT with jute and including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. 22.38A 2 Job
102 102 Replacing and fixing white glazed earthen ware W.C. 'Orissa' pan of Hindware or equivalent make of (580x440) mm size of approved sample including cost of all materials, labour and T&P etc completion including dismentling of broken Pan and its disposal out side corporation area. 22.39 1 Each
103 103 Replacing and fixing first quality European type white glazed earthen ware I.S.I marked W.C. pan size (450x300) mm (Hindware or equivalent make as approved sample) including cost of all materials, labour and T&P etc. required for proper completion of wrok. 22.41 1 Each
104 104 Repair of sluice valve of 100mm/80 mm size including replacing of spandle as per approved sample and including opening and refixing of the valve and including cost of all materials, labour and T&P etc. required for proper completion of the work. 22.43 1 Job
105 105 Hiring charge of welding machine for 8 hours service in a day or part as per requirement for attending miner type welding work as and where required as per direction of E/I. 22.101 1 Job Per Day
106 106 Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below.\n(a) Job attending by one no. Plumber/welder/mason/carpenter with one no. helper per hour or part of an hour. 22.109 A 1 Hour
107 107 Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below.\n(b) Job attending by one no. Plumber/welder /mason/carpenter with two no. helper per hour or part of an hour. 22.109 B 1 Hour
108 108 Cleaning of sweeping or roof as and when required including uprooting of rank vegetation and disposal of the garbage upto 50 M. 22.11 10 %Sqm
109 109 Providing and fixing 15mm dia B-class (T.T./ Swastik make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete (Internal work). 24.01 7 RM
110 110 Providing and fixing 20mm dia B-class (T.T./ Swastik make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete (Internal work). 24.02 2 RM
111 111 Providing and fixing 15mm dia B-class (T.T./ Swastik make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete (Extranal work). 24.1 5 RM
112 112 Providing and fixing 20mm dia B-class (T.T./ Swastik make) ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete (Extranal work). 24.11 2 RM
113 113 Supply and fixing CP Brass bib cock 15 mm dia heavy quality CAT 0010(Royal) Sonata or equivalent make including supply of all materials labour .T&P etc. required for the proper complittion of the work 24.2 5 Each
114 114 Supply and fixing Brass bib cock heavy quality 15mm dia (400gms) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.22 1 Each
115 115 Supply and fixing Brass bib cock heavy quality 15mm dia (200gms) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.23 5 Each
116 116 Supply and fixing of 15 mm dia C.I. / PVC bib-cock including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.25 5 Each
117 117 Supply and fixing of 15 mm dia C.P.Brass Angle Valve of heavy quality SONATA,COATS or equiv. make including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.26 1 Each
118 118 Supply and fixing C.P. Brass stop cock 15 mm dia L &K / Sonata-CAT 0100 Royal or equivalent make including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.28 1 Each
119 119 Supply and fixing Brass stop cock heavey quality (200 gms) 15 mm dia ISI mark including supply of all materials labour and T&P etc. Required for proper completion of the wrok. 24.31 1 Each
120 120 Providing and fixing 15mm dia C.P. Pillar cock (400 gms) of approved make including supply of all materials, labour, T&P etc. required for proper completion of work. 24.34 2 Each
121 121 Providing and fixing full way Brass G.M. gate valve 25 mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.35 2 Each
122 122 Providing and fixing full way Brass G.M. gate valve 50 mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.38 1 Each
123 123 Supply and fixing C.P. brass shower heavy quality 100 mm dia (weight not less than 225 gms) including cost of C.P. nipple 15 mm dia including supply of all material, labour, T&P etc. required for proper completion of the work. 24.4 1 Each
124 124 Providing and fixing P.V.C. connection pipe 300 mm long x 15 mm dia. with brass union including supply of all materials, labour and T & P etc. required for proper completion of work 24.41 5 Each
125 125 Supply and fixing of 15 mm dia P.V.C. float valve with brass union & rod complete ISI marked including supply of all materials, labour and T&P etc. required for proper completion of the work. 24.43 2 Each
126 126 Supply and fixing Syntex or equivalent make water storage tank of desired capacity including supply of all materials, labour and T & P etc. required for proper completion of work 24.45 500 Per Litre
127 127 Making water connection of G.I. pipe line with G.I. main by providing and fixing M.S. clamp,G.I. socket & rubber packing as per required size including welding and drilling hole in the pipe including supply of all material, labour and T&P etc. required for proper completion of the work. 24.46 1 Per Job
128 128 Providing and fixing 100/80 mm dia C.I./M.S. flange of heavy quality with nut, bolts, washer and rubber packing etc. complete as per direction of E/I 24.49 1 Each
129 129 Providing and fixing 80/100 mm dia C.I. D-Joint with ring rubber packing nut, bolt and washer etc. complete as per direction of E/I 24.5 1 Each
130 130 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointings of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.\nInternal work - Exposed on wall\n(a) 20mm nominal outer dia pipe 24B.01(a) 4 Metre
131 131 (b) 25mm nominal outer dia pipe 24B.01(b) 4 Metre
132 132 (e) 50mm nominal outer dia pipe 24B.01(e) 4 Metre
133 133 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointings of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making the same including testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc.\n(a) 20mm nominal outer dia pipe 24B.02(a) 4 Metre
134 134 (b) 25mm nominal outer dia pipe 24B.02(b) 4 Metre
135 135 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, This includes jointings of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge.\nExternal Work\n(a) 20mm nominal outer dia pipe 24B.03(a) 4 Metre
136 136 (b) 25mm nominal outer dia pipe 24B.03(b) 4 No
137 137 (e) 50mm nominal outer dia pipe 24B.03(e) 4 Metre
138 138 Providing and fixing white glazed “P” or “S” trap for W.C.pan over minimum 75 mm thick cement concrete in proportion of 1:6:12 including cost of cement concrete,all materials, labour, T&P etc. required for proper completion of the work. 25.04 1 No
139 139 Providing and fixing plastic seat cover complete with plastic lid C.P. brass hinges and rubber buffers for European seat complete including supply of all materials, labour, T&P etc. required for proper completion of work. 25.06 1 Each
140 140 Providing and fixing of Ist quality white glazed earthen ware wash hand basin ISI marked size 550mm x 400mm (Hindware or equivalent make) with R.S. or C.I. brackets, C.P. Brass pillar cock 15mm dia (weight not less than 400 gms) ISI marked, 32mm dia C.P. brass chain with rubber plug, 32mm dia C.P. Brass waste standard pattern with check nut, P.V.C. connection 15 mm dia including cutting and making good the walls and floor including cost of all required materials, labour and T& P etc. required for proper completion of work ( Fittings to be used should be of superior quality as per approved sample ). 25.07 1 Each
141 141 Providing and fixing 610mm x 450mm x 200mm 100% stainless steel Sink of approved quality as per approved sample with R.S. or C.I. brackets, 32mm C.P. brass waste complete with checknut, 32mm dia PVC waste pipe with bend including supply of all required materials, labour and T&P etc. required for proper completion of work. 25.11 1 Each
142 142 Providing and fixing bevelled edge looking mirror 5 mm thick glass Indian polished (Atul or equivalent make) size 600mm x 450mm as per approved sample with 6mm thick hard board sheet back fixed with PVC cleats & brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of work. 25.18 2 Each
143 143 Providing and fixing low level PVC cistern Hindware or equivalent make 10 litre capacity complete with all accessories including cost of all materials, labour and T&P etc. required for proper completion of work. 25.2 1 Each
144 144 Providing and fixing in position 32mm dia P.V.C. flush pipe for low level PVC flushing cistern 25.21 3 Each
145 145 P/F 32 mm dia P.V.C. waste pipe 25.28 5 Each
146 146 Providing Carpenter Services for 8 hours service in a day or part as per requirement by experienced carpenter with necessary T&P for attending minor type of repairing work as directed by the Engineer-in-charge 2.04+ 10% 5 Par Day
147 147 Providing belder Services for 8 hours service in a day or part as per requirement in to carry out the works as directed by the Engineer-in-charge. Chp. 2.08 + 10% 5 Each
148 148 Providing Plumber Services for 8 hours service in a day or part as per requirement by experienced plumber with necessary T&P for attending minor type of repairing work as directed by the Engineer-in-charge Chp. 2.07+ 10% 5 Par Day
149 149 Add to Item No. 4.01 to 4.05 above for every additional 30 Meters lead or part of 30 Meters or for every additional 1.5 M lift of part of 1.5 Metres. 4.06 20 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail