Military Engineer Services-MES has published Provn Of 04 X Att Toilets With Allied Services To Single Offr Provn Of 04 X Att Toilets With Allied Services To Single Offr Living In Ffc Complex At Bakloh Cantt. Submission Date for this Tender is 16-04-2020. Toilet Bathroom Tenders in DALHOUSIE Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Apr-2020 | AMENDMENT01 | Date | 16-04-2020 |
| Name of Work: PROVN OF 04 X ATT TOILETS WITH ALLIED SERVICES TO SINGLE OFFR LIVING IN FFC COMPLEX AT BAKLOH CANTT. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. | 4 | Cubic Metre | |
| 2 | 2 | Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in soft/ loose soil, complete all as specified. | 120 | Square Metre | |
| 3 | 3 | Excavation in trenches for foundations, laying of pipes, cables and manholes in soft/ loose soil n.exc 1.50 metres wide and but exc 1.50 metres deep and getting out complete all as specified and directed. | 22.35 | Cubic Metre | |
| 4 | 4 | Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and directed. | 12.65 | Cubic Metre | |
| 5 | 5 | Removing excavatrd soils not exceeding 50 metres and deposting where directed at a level not exceeding 1.5o metres above the starting point. | 41.7 | Cubic Metre | |
| 6 | 6 | Plain cement concrete M-7.5 (Nominal mix), Type D-2 (using 40mm graded brick aggregate) as in foundations/ sub base of floors or in mass filling all as specified and directed. Note:- Thickness of sub base shall be 75/ 100 mm as required. | 14.85 | Cubic Metre | |
| 7 | 7 | Precast cement concrete M-15, nominal mix, type B-1 (using 20mm graded mechanically crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified. | 0.5 | Cubic Metre | |
| 8 | 8 | Plain cement concrete M-15, nominal mix, B-1 using 20 mm graded mechanically crushed stone aggregate as, in lintels upto 1.50 metres clear span, steps, seismic and other similar bends, coping, bands plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating complete all as specified. Note for Serial Item No 7 & 8:- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. | 0.25 | Cubic Metre | |
| 9 | 9 | PCC M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, surface finished even and fair without using extra cement including applying evenly a coat of hot blown bitumen @ 1.50 kg/ sqm and binding with clean dry sand @ 0.05cum/ sqm, all as specified. Note:- Form work shall be deemed to be included in the unit rate quoted by bidder. | 6.04 | Square Metre | |
| 10 | 10 | 40mm thick cement concrete M-15 (Nominal mix) type B-1 (Using 20mm graded crushed stone aggregate) as in floorimg, finished even & rough complete all as specified and directed. | 28 | Square Metre | |
| 11 | 11 | 30mm thick cement concrete M-15 (Nominal mix) type B-0 (using 12.5mm graded crushed stone agg ) as in flooring, finished even & fair complete all as specified and directed. | 80 | Square Metre | |
| 12 | 12 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 50mm thick sand cushion, joints of tiles filled with dry sand and compacted with mechanical vibrator complete all as specified and directed.\nNote:- PCC sub base 75 mm thick shall be paid under respective Item of BOQ. | 120 | Square Metre | |
| 13 | 13 | Earth filling under floor as obtained from excavation including spreading and levelling in layers n. exc 25cms thick including well ramming and watering as required. | 4 | Cubic Metre | |
| 14 | 14 | Hard core of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, all as specified. | 2.8 | Cubic Metre | |
| 15 | 15 | Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed. | 12 | Cubic Metre | |
| 16 | 16 | Vitrified Ceramic tiles (premium quality) 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4 complete, complete all as specified and directed. | 80 | Square Metre | |
| 17 | 17 | Mat finish, premium quality, coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. | 28 | Square Metre | |
| 18 | 18 | Glazed ceramic, premium quality, coloured/ printed tiles 450mm x 350mm x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. | 75 | Square Metre | |
| 19 | 19 | Reinforced cement concrete (Design mix) M-25 using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 metres span, all as specified. Note:- Form work and reinforcement if any shall be measured and paid separately. | 4.5 | Cubic Metre | |
| 20 | 20 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. For roughly finished flat surfaces of concrete, all as specified. | 57 | Square Metre | |
| 21 | 21 | TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 200 | Kilogram | |
| 22 | 22 | TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. | 120 | Kilogram | |
| 23 | 23 | Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe 410 -W (Gde-E- 250) quality-A, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces all as specified. | 350 | Kilogram | |
| 24 | 24 | Mild steel framed work such as grills, gratings, frames for manholes etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified.\n | 25 | Kilogram | |
| 25 | 25 | Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed. | 35 | Square Metre | |
| 26 | 26 | Steel clip-in false ceiling system with steel plain, perforated, beveled edged tile (600mmx600mm) manufactured out of 0.50 mm thick polyster coil coated galvanised steel having 180 grams zinc coating. Coil coated steel tile shall have 20 micron polyster coated finish on front side and back coat of 5 micron alkalys primer. Two sides of each tile shall be raised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip-in profile of size 38mm x 20 mm and installed at 600 mm c/c spacing to support the tiles. Wall suspension angle, clip-in profiles shall be suspended and jointed fs of size 24 mm X 24 mmX 0.40mm thick are suspended from roof structure by GI ceiling brackets. wall suspension angles of size 24mmx24mm and 0.40mm thick are suspended from the roof structure by GI ceiling brackets. Wall suspension angle are made of coil coated steel matching the colour of tile. They are jointed to the clip in-profile system by hold on clamps. The tiles/ planks are held in place by pressure clips as per manufacuters instructions for spacing. In the flexible system the hanger and butterfly clip replace the suspension angle including necessary scaffolding all as per manufacuters specifications/ instructions and specified and directd by GE. Make:- As per Appendix "C". | 35 | Square Metre | |
| 27 | 27 | Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. | 62 | Square Metre | |
| 28 | 28 | Rendering cement plaster 15 mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer), on other than fair faces of brick wall or on stone masonry surfaces, trowelled to even and smooth finish without using extra cement complete all as specified. | 35 | Square Metre | |
| 29 | 29 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over 2mm thick wall care putty (applied in two layers), finished smooth with sand paper complete all as specified and directed. | 35 | Square Metre | |
| 30 | 30 | Applying two coats of cement base paint on newly plastered or previously undecorated wall surfaces with alkali resistant priming coat including preparation of surface, tint and shade as approved by Engr-in-Charge. | 62 | Square Metre | |
| 31 | 31 | Factory made solid PVC Door Frame of size 50mm x 95mm made out of 5mm thick single side prelaminated PVC sheet and edges shall be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 160 of MES SSR 2010 Part-II | 18.7 | Running Metre | |
| 32 | 32 | Factory made EPS core solid PVC moulded door shutter with wood free EPS board, 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm Plain prelaminated PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing on Page No. 161 of MES SSR Part-II. The door shall on all edges to be sealed with lipping of 10 mm (5 mm X 2) thick and 25 mm wide PVC sheet for three sides and 60 mm wide PVC sheet for lock side. The lipping shall be bonded to the 2 mm moulded/ plain PVC sheet with solvent cement all as specified and directed. | 6.7 | Square Metre | |
| 33 | 33 | Aluminium anodised, barrel tower bolts of size 100mm extruded section and fixed all as specified & directed. | 8 | Each | |
| 34 | 34 | Butt hinges, medium weight, cold rolled, mild steel 100mm complete all as specified and directed. | 12 | Each | |
| 35 | 35 | Aluminum long handle, cast type anodised of size 150 mm complete all as specified and directed. | 8 | Each | |
| 36 | 36 | Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 200 mm long, all as specified and directed. | 4 | Each | |
| 37 | 37 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified, fixed including one shop coat of red oxide zinc chrome primer, all as specified. Note:- Weight of steel windows shall be asessed by BOO convened by GE. | 35 | Kilogram | |
| 38 | 38 | 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. | 1.2 | Square Metre | |
| 39 | 39 | Painting two coats with synthetic enamelled paint on new steel or iron surfaces of any description exceeding 10cm width/ girth including preparation of surfaces over a coat of red oxide primer all as specified and directed. | 40 | Square Metre | |
| 40 | 40 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in tranches of bore 110mm complete, all as specified.\nNote:- Excavation and earth work shall be measured and pai under respective Items of BOQ. | 60 | Running Metre | |
| 41 | 41 | PVC (SWR) bends any radius, 110mm bore, all as specified. | 12 | Each | |
| 42 | 42 | Grating doom 140mm dia of PTMT (Minimum weight 50 gms), all as specified. | 8 | Each | |
| 43 | 43 | Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs all as specified. \nMake: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent in makes mentioned in Appx 'C' | 4 | Each | |
| 44 | 44 | PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. Make: Cat Part No. 2602 of Cera or equivalent in makes mentioned in Appx 'C'.\n | 4 | Each | |
| 45 | 45 | Wash hand basins, Vitreous China (White) size 550mmx400mm, excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, chain and plug, PVC 32mm dia flush pipe and all accessories fixed complete as all specified and directed.\nMake: Cat Part No. 1008 of Cera or equivalent makes mentioned in Appx 'C' | 4 | Each | |
| 46 | 46 | 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified. Make of glass as per Appendix 'C'. | 4 | Each | |
| 47 | 47 | Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified. | 4 | Each | |
| 48 | 48 | Pillar taps, 15mm bore, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down, high pressure, with long shank, with or without lettered 'Hot' or 'Cold' screwed for iron pipe, or brass ferrule, fixed all as specified. | 4 | Each | |
| 49 | 49 | Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed all as specified. | 4 | Each | |
| 50 | 50 | Cutting existing steel tubing upto 50 mm dia steel tubing for alterations or additions/ making connections to 15/ 20 mm steel tubing (Each cut measured), screwing steel tubing (or lengthening screw on pipe to form connector) with and including one Tee of 20 mm size complete, all as specified. | 1 | Each Job | |
| 51 | 51 | Mild steel galvanised iron tubings (ISI Marked) 20mm dia medium grade with all fittings & fixtures complete laid in trenches all as specified and directed. | 30 | Running Metre | |
| 52 | 52 | Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 1/4 section) in PCC M-15, type B-I, using 20 mm graded crushed stone aggregate, smooth finished and reforming benching for 150 mm dia pipe, all as specified and directed.\n | 1 | Job | |
| 53 | 53 | Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified.\n | 2 | Each | |
| 54 | 54 | Brass chromium plated tubular towel rail 20 mm dia, "D" type, 60 cms long between flanges fixed in repairs with and including chromium plated brass brackets, brass screws complete all as specified | 4 | Each | |
| 55 | 55 | Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), fixed with chromium plated brass screws, complete fixed in repairs all as specified.\n | 4 | Each | |
| 56 | 56 | Mild steel galvanised iron tubings (ISI Marked) 15mm dia medium grade with all fittings & fixtures complete concealed in walls/ ceilings or laid in floors all as specified and directed. | 80 | Running Metre | |
| 57 | 57 | Mild steel galvanised iron tubings (ISI Marked) 20mm dia medium grade with all fittings & fixtures complete concealed in walls/ ceilings or laid in floors all as specified and directed.\nNote for Serial Item No 56 & 57:- Cutting chases for concealed water tubing and making good to match with existing shall be deemed to be included in Unit Rate quoted by bidder. | 140 | Running Metre | |
| 58 | 58 | Stop valves/ angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed in repairs complete, all as specified. | 8 | Each | |
| 59 | 59 | Chromium plated angle valve/ stop valve concealed type, cast copper alloy with long shank, 15mm bore, screwed down, high pressure with crutch or butterfly handle both ends screwed for iron pipe or for union etc. all as specified. | 20 | Each | |
| 60 | 60 | PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed in repairs, all as specified. | 20 | Each | |
| 61 | 61 | Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe of bore 15 mm and fixed in repairs, all as specified and directed.\n | 4 | Each | |
| 62 | 62 | PVC (SWR) floor trap/ nahani trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm, all as specified and directed. | 4 | Each | |
| 63 | 63 | Reinforced concrete pipes, class NP3, laid and jointed complete with collars, bore of pipe 150mm, all as specified.\nNote:- Excavation and earth work shall be measured and paid under respective Items of BOQ. | 121.8 | Running Metre | |
| 64 | 64 | Plain cement concrete M-7.5, type D-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for internal dia of pipe 150 mm (thickness of bed shall be 10 cms), all as specified. Note:- (i) The unit rate include for use of form work. (ii) Width of bed shall be outer dia of drain pipe plus 30 cms. Haunching shall be as per MES SSR-part-I/Part-II | 120 | Running Metre | |
| 65 | 65 | Point wiring with 1.5 Sqmm copper conductor FRLS (Multistrand) PVC insulated ISI Marked unsheathed cable in and including PVC concealed conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking, medium grade, ISI marked with all fittings/ accessories as specified in preamble 1 (a) to (q) of Section 19 of SSR Part-II, under heading point wiring, cutting chases, making good in cement mortar (1:3), finishing surfaces to match with existing and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as earth wire (green colour) connected to common earth dolly for modular fitting, modular box sunk for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for one light point or one fan point through regulator or one bell point, controlled by one way switch/ push button complete all as specified and directed.\n | 16 | Point | |
| 66 | 66 | All as per serial item No '65' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed. | 4 | Point | |
| 67 | 67 | All as per serial item No '65' above, but for one 3 pin 5 Amps socket outlet, independent all as specified and directed. | 4 | Point | |
| 68 | 68 | All as per serial item No. '65' above but for 3 pin 15 Amps socket out let independent with 2.5 Sqmm PVC copper conductor cable and and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified. | 8 | Point | |
| 69 | 69 | Switch piano flush type, single pole, one way, 5 Amps, all as specified. | 24 | Each | |
| 70 | 70 | Switch piano, flush type, single pole, one way, 15 Amps, all as specified and directed. | 4 | Each | |
| 71 | 71 | Socket outlet two & three pin 5Amp flush type, all as specified. | 4 | Each | |
| 72 | 72 | Socket outlet two in one, 3 pin 5 and 15 Amps, flush type, all as specified. | 4 | Each | |
| 73 | 73 | Ceiling rose, 65 mm to 50 mm, two to three terminals, PVC/ Polycarbonate, insulated body fixed on PVC block, all as specified. | 12 | Each | |
| 74 | 74 | Lamp holder, PVC/ Polycarbonate type with back plate suitable for angular/ batten fittings, all as specified. | 4 | Each | |
| 75 | 75 | E-lite LED Triyca batten, colour changing LED batten with options of 3000K, 4000K & 6500K all in one fixture, 20 Watts, 4 feet complete with all accessories and fixtures prewired and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete. Make : Havell's Cat Part No. LHEXBYPNIN1W020 or equivalent in makes mentioned in Appx 'C'.\n\n | 4 | Each | |
| 76 | 76 | Renewal of mirror optics linear and compact 9 Watt mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete with all accessories and fixtures with extruded polycarbonate, environmental friendly with 9 watts LED tube rod/ lamp with all acessoreis prewired and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed. Make : Havell's Cat Part No. LHEXARP7PN1W009 or equivalent in makes mentioned in Appx 'C'.\n\n | 4 | Each | |
| 77 | 77 | Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 4 way, double door, 240 volts with 200 Amp rated bus bar, all as specified. \nMake : Indo Asian Cat Part No. 811805 or equivalent makes mentioned in Appx 'C'.\n | 5 | Each | |
| 78 | 78 | SCRD BOX plug and socket 25 Amps for geyser with mettalic cover all as specified.\nMake : "Havell's" Cat Part No. DHDDCDP025202503 or equivalent makes mentioned in Appx 'C'. | 4 | Each | |
| 79 | 79 | MCB TPN 63 Amp, 415 Volts, 10 kA all as specified.\nMake : Indoasian Cat Part No. 811359 or equivalent makes mentioned in Appx 'C'. | 1 | Each | |
| 80 | 80 | MCB SPN 6 to 40 Amp, 240 Volts, 10 kA all as specified.\nMake : Indo Asian Cat Part No. 811144 to 811152 or equivalent makes mentioned in Appx 'C'. | 4 | Each | |
| 81 | 81 | MCB SP 6 to 40 Amp, 240 Volts, 10 kA all as specified.\nMake : Indo Asian Cat Part No. 811122 to 811129 or equivalent makes mentioned in Appx 'C'. | 8 | Each | |
| 82 | 82 | Exhaust fan 200 mm sweep, PVC body complete with louvers including all accessories such as nuts, bolts, washers, mounting pads and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete all as specified and directed. Make : As per Appx 'C'.\n\n | 4 | Each | |
| 83 | 83 | Electric water storage heater (Geyser), 5 star rated of 25 litres capacity including grouting of bolts/ anchor bolts/ fasteners in PCC M-15, type B-0 and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete all as specified and directed. \nMake : "Havell's" Cat Part No. GHWAMFSWH025 or equivalent makes mentioned in Appx 'C'.\n\n | 4 | Each | |
| 84 | 84 | Cutting/ grooving in plinth protection/ wall/ verandah in any condition for laying of cable through pipe and making good the disturbed surfaces to match with existing using PCC M-15, type B-0 with 12.5 mm graded crushed stone aggregate including removing surplus material to a distance not exc 50 metres from starting point, complete and as directed.\n\n | 2 | Running Metre | |
| 85 | 85 | Renewal of concealed sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded RLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 4 Sqmm and drawn into and including PVC conduit with all fittings/ accessories, junction boxes 1 to 4 way 20mm dia, cutting chases, making good in cement mortar in CM (1:3), finishing surfaces to match with existing and connected to common earth dolly, complete and as directed.\nNote :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 4 Sqmm, shall be measured as one RM). \n\n | 24 | Running Metre | |
| 86 | 86 | Mild steel galvanised iron tubing light grade for cable protection in crossing drain of 40mm size. Make of GI tubing:- Makes as mentioned in Appendix 'C'. | 3 | Running Metre | |
| 87 | 87 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing complete and taking out old unservicable cable all as specified. Note:- Excavation & Earth work, cable cover, GI tubing and sand cushioning shall be measured and paid separetly.\n | 30 | Running Metre | |
| 88 | 88 | Sand cushioning to under ground cables provided with a layer of sand 8 cms thick before laying the cable and 15 cms thick after laying the cable complete all as specified and directed. | 1.62 | Cubic Metre | |
| 89 | 89 | Sub class "B" bricks for covering to cable laid dry flat, with width equal to length of bricks all as specified and directed. | 170 | Each | |
| 90 | 90 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC M-15, type B-I using 20mm graded crushed stone aggregates with 40mm thick cover of RCC M-15, type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.\n | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
