Tender For Road Work - L025-Maner To Haldi Chapra - 1 Road Name - Maner To Haldi Chhapra. Nsetting Out As Mord Specification 100 Item Nos ( I ) , ( Ii ) , ( Iii ) & ( Iv ) Nconstruction Of Reference & Working Benchmarks 2 Construction Of Reference Pillars / Burjees 3 Clearing And Grubbing Road Land Nclearing And Grubbing Road Land Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300 Mm, Removal Of Stumps Of Such Trees Cut Earlier And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To Be Used Or Auctioned, Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Per Technical Specification Clause 201. Nby Manual Means Nin Area Of Non-Thorny Jungle 4 Construction Of Embankment With Material Obtained From Borrow Pits With A Lift Upto 1.5 M , Transporting To The Site Spreading , Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M & 100 M As Per Technical Specification Clause 301.5 . For 1000 M Lead @ 30 % 5 Construction Of Embankment With Material Obtained From Borrow Pits With A Lift Upto 1.5 M , Transporting To The Site Spreading , Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M & 100 M As Per Technical Specification Clause 301.5 . For 100 M Lead @ 70 % 6 Construction Of Subgrade Nconstruction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. N Construction Of Subgrade 7 Granular Sub-Base With Well Graded Material ( Table 400.1 ) Nconstruction Of Granular Sub-Base By Providing Well Graded Material ( Crushed Stone Aggregates And Sand ) , Spreading In Uniform Layers With Tractor Mounted Grader Arrangement On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. Grading I Material. 8 Wbm Grading 3 Nproviding, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. N ( A ) By Manual Means 9 Prime Coat ( Low Porosity ) Nproviding And Applying Primer Coat With Bitumen Emulsion ( Ss-1 ) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0Kg / Sqm Using Mechanical Means As Per Technical Specification Clause 502 10 Tack Coat Nproviding And Applying Tack Coat With Bitumen Emulsion ( Rs-1 ) Using Emulsion Distributor At The Rate Of 0.25-0.30Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. 11 Bituminous Macadam Providing And Laying Bituminous Macadam With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site, Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level And Alignment And Rolled As Per Clauses 501.6 And 501.7 To Achieve The Desired Compaction 12 Semi-Dense Bituminous Concrete Nproviding And Laying Semi Dense Bituminous Concrete With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 To 5 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 508 Complete In All Respects. 13 Construction Of Panel Concrete , Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Caluse 1501.2.2 M 30 ( Grade ) Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Capasity And Appropriate Weigh Batcher Using Approved Mix Design , Laid In Approved Fixed Side Formwork ( Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing ) , Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Operation Including Provision Of Contraction And Expansion , Construction Joints, Applying Debonding Strips , Primer , Sealant , Dowel Bars, Near Approaches To Bridge / Culvert And Construction Joints, Admixture As Approved , Curing Of Concrete Slabs For 14 Days. Curing Compound ( Where Specified ) And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501. Pcc Grade M-30 Eachpanel ( 0.50X0.50 ) Thickness 100 Mm 14 Hard Shouldering Nlaying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolling The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412. 15 Kilometre Stone Nreinforced Cement Concrete M15 Grade Kilometre Stone / Local Stone Of Standard Design As Per Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification Clause 1703 N 16 Kilometre Stone Nreinforced Cement Concrete M15 Grade Kilometre Stone / Local Stone Of Standard Design As Per Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification Clause 1703 N Ordinary Kilometer Stone ( Precast ) 17 Kilometre Stone Nreinforced Cement Concrete M15 Grade Kilometre Stone / Local Stone Of Standard Design As Per Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification Clause 1703 N 200 M Stone ( Precast ) 18 Mmgsy Sign Board Nproviding And Fixing Of Typical Mmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 19 Retro-Reflectorised Traffic Signs Nproviding And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 600 Mm Equilateral & Triangle. 20 Retro-Reflectorised Traffic Signs Nproviding And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 600 Mm Side Circle. 21 Retro-Reflectorised Traffic Signs Nproviding And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 800 Mm X 600 Mm Rectangular 22 Retro-Reflectorised Traffic Signs Nproviding And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 900 Mm Side Octagonal 23 Retro-Reflectorised Traffic Signs Nproviding And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 600 Mm X 450 Mm Rectangular 24 Boundary Pillar Nreinforced Cement Concrete M15 Grade Boundary Pillars / Local Stone Of Standard Design As Per Irc:25, Fixed In Position Including Finishing And Lettering But Excluding Painting As Per Drawing And Technical Specification Clause 1704 25 Planting Of Trees And Their Maintenance For One Year Nplanting Of Trees By The Road Side ( Avenue Trees ) In 0.60 M Dia Holes, 1 M Deep Dug In The Ground, Mixing The Soil With Decayed Farm Yard / Sludge Manure, Planting The Saplings, Backfilling The Trench, Watering, Fixing The Tree Guard And Maintaining The Plants For One Year 26 Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminous Surface & Cement Concrete Pavement Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. 27 Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. 28 Type B ( First Class ) Beddinglaying ( First Class ) Bedding On Well Compacted Local Sand, Approved Material. 29 Providing Concrete For Plain / Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Npcc M-15 30 Head Wall In Brick Masonry Work In Cement Mortar ( 1:4 ) In Substructure Complete Excepting Pointing And Plastering, As Per Drawing And Technical Specification Clauses 602, 603, 604, 1202 & 1204 31 Providing And Laying Rcc Pipe Np3 ( 1X1000 Mm Dia ) Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material Including Fixing Collar With Cement Mortor 1:2 But Excluding Excavation , Protection Works , Backfilling , Concrete And Masonary Works In Head Walls And Parapets Clauses 1106 32 Plastering With Cm 1:4Plastering With Cm 1:415Mm Thick On Brickwork In Substructureas Per Technical Specification Clause 613.4 & 1204 33 Painting On Concrete / Steel Surfaces With Epox Painting Two Coats Including Prime Coat With Epoxy Paint Of Approved Brand On Concrete / Steel Surfaces After Through Cleaning Of Surface To Give An Even Shade As Per Drawing And Technical Specification Clause 1701 34 Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. I ) Upto 3 M Depth 35 Pcc Grade M15 : Providing Concrete For Plain / Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 36 Providing Concrete For Plain / Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 ( Pcc M - 20 ) 37 Supplying, Fitting And Placing Hysd Bar Reinforcement ( Fe 415 ) In Complete As Per Drawings And Technical Specification Clauses 1002, 1005, 1010 & 1202 38 12 % Gst And 1 % Labour Cess On Construction Cost 39 1St Year Maintenance Cost 40 2Nd Year Maintenance Cost 41 3Rd Year Maintenance Cost 42 4Th Year Maintenance Cost 43 5Th Year Maintenance Cost 44 12 % Gst And 1 % Labour Cess On Maintenance Cost 45 Seigniorage Fee.
