}

Provn Of Rains Shed Near Bldg No P-831 , Extn Of Roof Sheeting To Open Area For Bldg No P-832 , P-833 , P-834 , P-835 , P-836 , P-837 Map Accn Vayu Vihar And Provn Of Alumnium Panel On Stage Of Likabali Auditorium At Brichunj Mil Stn Port Blair, Port Blair-Andaman And Nicobar Islands

Military Engineer Services-MES has published Provn Of Rains Shed Near Bldg No P-831 , Extn Of Roof Sheeting To Open Area For Bldg No P-832 , P-833 , P-834 , P-835 , P-836 , P-837 Map Accn Vayu Vihar And Provn Of Alumnium Panel On Stage Of Likabali Auditorium At Brichunj Mil Stn Port Blair. Submission Date for this Tender is 06-06-2020. Shed Construction Tenders in Port Blair Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.




Tender Notice

24114295
Corrigendum : Provn Of Rains Shed Near Bldg No P-831 , Extn Of Roof Sheeting To Open Area For Bldg No P-832 , P-833 , P-834 , P-835 , P-836 , P-837 Map Accn Vayu Vihar And Provn Of Alumnium Panel On Stage Of Likabali Auditorium At Brichunj Mil Stn Port Blair
Open Tender
Indian
Andaman And Nicobar Islands
Port Blair
06-06-2020

Tender Details

Provn Of Rains Shed Near Bldg No P-831 , Extn Of Roof Sheeting To Open Area For Bldg No P-832 , P-833 , P-834 , P-835 , P-836 , P-837 Map Accn Vayu Vihar And Provn Of Alumnium Panel On Stage Of Likabali Auditorium At Brichunj Mil Stn Port Blair

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Apr-2020 date corrigendum Date 11-05-2020
2 11-May-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 18-05-2020
3 12-May-2020 postponemnt Date 26-05-2020
4 27-May-2020 Postponed Date 06-06-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 76000.0 /-
Tender Value
INR 38 Lakhs /-

BOQ Items

Name of Work: PROVN OF RAINS SHED NEAR BLDG NO P-831, EXTN OF ROOF SHEETING TO OPEN AREA FOR BLDG NO P-832, P-833, P-834, P-835, P-836, P-837 MAP ACCN VAYU VIHAR AND PROVN OF ALUMNIUM PANEL ON STAGE OF LIKABALI AUDITORIUM AT BRICHUNJ MIL STN PORT BLAIR
Sl. No. Item Description Item Code / Make Unnamed: 3 Units
1 1 Surface dressing not exceeding 15cm deep and getting out in hard/dense soil complete all as specified and as directed 100 Square metre
2 2 Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/dense Soil complete all as specified and as directed. 11 Cubic metre
3 3 Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed 5 Cubic metre
4 4 Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. 21 Cubic metre
5 5 Excavation post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/ dense soil, Returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. 20 Each
6 6 Material and labour for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. 15 Cubic metre
7 7 Material and labour Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. 7 Cubic metre
8 8 Material and labour precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed. 8 Cubic metre
9 9 Material and labour 100mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified. 90 Square metre
10 10 Cutting holes exc. half brick but not exc one brick in stone walls built in CM or in cement lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 complete all as specified and as directed 165 Each
11 11 Material and labour for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed. 25 Square metre
12 12 Material and labour for rendering 5 mm thick in CM 1:4 over backing coat of 10 mm thick in C M 1:6, finished even and smooth without using extra cement etc complete all as specified and as directed. 66 Square metre
13 13 Supply and fix MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed 10700 kilogram
14 14 Material and labour for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed. 425 kilogram
15 15 Supply and fix MS Flat iron wind ties for roof including securing bolts, cutting tops at shape as directed, drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed 300 kilogram
16 16 Supply and fix Bands, straps, supports or stays for rainwater pipe, ventilating pipes including bolts, if required hooks (stays), heavy, for large gates, hook and spindle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans, plain angle cleats, for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plates washers and similar articles confirming to Fe-290 Gde E-165 etc complete all as specified and as directed by Engineer in Charge. 140 kilogram
17 17 Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed. 635 Square metre
18 18 Supply and fix of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed 85 Square metre
19 19 Supply and fix of 4.00mm thick Polycarbonate sheet Opaque finish plain colour as in roof covering/cladding to wall, fixed with self tapping screws as specified 140 Square metre
20 20 Material and labour for preparing new steel/iron surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. 285 Square metre
21 21 Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge. 66 Square metre
22 22 Material and labour for chequerred cement concrete tiles 300x 300mm x 25mm thick size set, jointed and pointed in neat cement slurry incl 20mm thick in CM 1:4 bedding layer of mortar complete all as specified and as directed. 90 Square metre
23 23 Material and Lobour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed 65 Running metre
24 24 Supply and fix PVC (SWR) bends any radius 110mm bore complete all as specified and as directed 35 Each
25 25 Supply and fix aluminium composite panel sheet of 3 to 4mm thick as in wall cladding and false ceiling, fixed on aluminum frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant. The board shall be stuck with a layer of any colour high-density reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. \nNote : aluminium frame work shall be included with aluminium composite panel sheet as per manufactures instruction\n 37 Square metre
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail