Indian Oil Corporation Limited-IOCL has published Wbso Engg Led Haldiab Augmentation Of Lux Level Of The Terminal Thru Replacement Of Conventional Fitting In Existing High Mast Towers With Led Lights Provision Of Additional New 5 Nos High Mast Towers And Flp Control Panels Provision Of Led Light Fitting. Submission Date for this Tender is 20-05-2020. LED Light Tenders in HALDIA B West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Mar-2020 | revision of CRITICAL DATES | Date | 27-04-2020 |
| 2 | 21-Apr-2020 | DATE CHANGE | Date | 06-05-2020 |
| 3 | 05-May-2020 | EXTENSION OF SUBMISSION DATE | Date | 20-05-2020 |
| Name of Work: Augmentation of Lux Level of the Terminal thru replacement of conventional fitting in existing High Mast Towers with LED Lights, provision of additional new 5 (Five) Nos. High Mast Towers and FLP Control Panels, provision of LED light fittings at TLF and Pump House including allied cable & Civil works at Haldia Terminal - B under West Bengal State Office | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Unit | |
| 1 | 10 | MAST: Supply of 30 M high mast shaft in three sections, hot dip galvanised, suitable for 50 m/sec wind speed with raising/ lowering system comprising head frame, galvanised luminiares carriage suitable to install 16 nos. of luminiares in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral FLP power tool motor, manual handle, FLP junction box in bottom section, lightning protection system. Wiring material. Power cables between FLP panel and mast, FLP JB / FLP Plug-Socket in base compartment are not included. Electrical accessories at the bottom such as Integral PT, plug & socket shall be Flameproof suitable for Gas Group IIA/IIB provided with CMRI certificate/ Explosive License. Trailing Cable of Size 5 Core 4.0 sqmm Copper Cable is to be supplied by the Vendor. | ITEM CODE 4 | 5 | Nos. |
| 2 | 20 | FLP FEEDER PILLAR: Supply & installation of FLP Control Feeder Pillar Panel for High Mast Tower. 1no weatherproof IP-65 feeder pillar box with stand (mounting of pillar panel 1000mm min.clearance from ground) with FRP canopy, Feeder pillar shall have min. 4P 63 A MCCB as incomer, 3nos LED indicating lamps, astronomical timer, 45A TP contactor for the automatic switching of luminaries, Auto-off manual switch, 1no 4P 40A ELCB (30mA) & 3nos 40A DP MCB for light ckt., 1no 32A TP SFU, 2nos 9A contactors, 1no BMR for winch motor ckt., power tool control with 2 no 9A contactors and raise lower push button raise& lower PBs, space heater with thermostat & DP MCB, 10A DP MCB for aviation light ckt, control circuit with MCB, clip-on/ clamp type termination arrangement for incoming cable of 35/50 sqmm & outgoing cables of High Mast with suitable size FLP Double Compression glands, stoppers. All the electrical accessories must be enclosed in FLP enclosures for the bottom part of High Mast. | ITEM CODE 5 | 5 | Nos. |
| 3 | 30 | Supply & installation of FLP 72W LED –Flameproof light fitting. AL(LM 6), Zone-1, GR.IIA/IIB, IP-65, with 2Nos. 0.75”ET cable entry. Without Gland & Plug. Finish: Epoxy powder coated light grey shade 631/IS:5. Approved:- CIMFR & PESO | ITEM CODE 6 | 72 | Nos. |
| 4 | 40 | Supply & installation of non-integral LED flood light luminaire with 350 watt LED Radiators. Supply will include integral flood light luminaire with pressure die cast aluminium housing and heat resistant toughened flat glass (IP65). | ITEM CODE 7 | 160 | Nos. |
| 5 | 50 | Supply of LED type Twin dome aviation obstruction light on top of High Mast. | ITEM CODE 8 | 5 | Nos. |
| 6 | 60 | Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. | ITEM CODE 9 | 5 | set |
| 7 | 70 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides & ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil & disposal of surplus excavated soil as directed within or outside the site at an unobjectionable place. | ITEM CODE 13 | ||
| 8 | 80 | i) All kinds of Soil | ITEM CODE 14 | 200 | CM |
| 9 | 90 | Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level | ITEM CODE 15 | ||
| 10 | 100 | i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm | ITEM CODE 16 | 60 | CM |
| 11 | 110 | Supply of Reinforcement Steel for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels | ITEM CODE 17 | ||
| 12 | 120 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | ITEM CODE 18 | 2000 | Kg |
| 13 | 130 | Centering and shuttering including strutting, propping etc. and removal of form for : | ITEM CODE 19 | ||
| 14 | 140 | i) Foundations, footings, bases of columns, etc. for mass concrete | ITEM CODE 20 | 250 | SM |
| 15 | 150 | Structural steel work riveted, bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | ITEM CODE 21 | 5000 | Kg |
| 16 | 160 | Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items. Cable will be supplied with Manufacturer's Test Certificate and Third Party Inspection Certificate. After Installation of Cable the Insulation test certificate must be submitted after carrying out the same at site with Insulation Meggar. | ITEM CODE 22 | ||
| 17 | 170 | iv) 3 Core x 2.5 sq. mm Copper Cable FRLS | ITEM CODE 23 | 500 | RM |
| 18 | 180 | 3.5 core x 35 Sq.mm Aluminium Armoured XLPE Cable | ITEM CODE 24 | 3500 | RM |
| 19 | 190 | CABLE BRICK DUCT Providing & constructing underground brick duct 650mm below GL for laying of 3 cables of max. diameter 70mm, complete with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils | ITEM CODE 25 | ||
| 20 | 200 | Brick duct for cables, 450mm wide (24 Bricks & 0.0494 cum per Mtr) as per specifications and direction of Engineer in charge. | ITEM CODE 26 | 300 | RM |
| 21 | 210 | i) Providing Earthing Pit with 100 mm dia, 3.0M long C.I pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge | ITEM CODE 27 | 15 | Nos. |
| 22 | 220 | Supply & drawing/laying, jointing, connecting, testing and commissioning of GI earth strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following including supply of Lightning arrestor spike and laying of Strip through bakelite for lightning arrestor: | ITEM CODE 28 | ||
| 23 | 230 | 50X6 GI Strip | ITEM CODE 29 | 150 | RM |
| 24 | 240 | 32X6 GI Strip | ITEM CODE 30 | 100 | RM |
| 25 | 250 | Cable Termination (FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Baliga/CEAG-FCG/Flexpro/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. | ITEM CODE 31 | ||
| 26 | 260 | 3.5 Core x 35 sq. mm | ITEM CODE 32 | 10 | Nos. |
| 27 | 270 | 3 Core x 2.5 sq.mm. Copper | ITEM CODE 33 | 100 | Nos. |
| 28 | 280 | Cable Termination (NON FLP) : Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. | ITEM CODE 34 | ||
| 29 | 290 | 3.5 Core x 35 sq. mm | ITEM CODE 35 | 5 | Nos. |
| 30 | 300 | Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of Indian Oil | ITEM CODE 36 | ||
| 31 | 310 | S/F/I Perforated GI trays of 100mm x25mmx 2mm with bends, tees, cross members etc. as per specifications and direction of Engineer in charge | ITEM CODE 37 | 500 | RM |
| 32 | 320 | Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen. | ITEM CODE 38 | 100 | RM |
| 33 | 330 | Supplying and installing of GI cable route marker with 100mm x 100mm x5mm thick GI Plate with inscription thereon, bolted/welded to 35mm x 35mm x 6mm angle iron, 600mm long and fixing the same in ground as per drawing & direction of IndianOil Job includes painting with one coat of redoxide & finishing paint | ITEM CODE 40 | 50 | Nos. |
| 34 | 340 | Providing and laying non-pressure NP3 class (Medium class) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.complete | ITEM CODE 41 | ||
| 35 | 350 | v) 600 mm dia. R.C.C. pipe | ITEM CODE 42 | 30 | RM |
| 36 | 360 | Erection of High Mast with the help of suitable tools & equipments and plants, wiring of luminiares with all wiring materials like PVC insulated, PVC seathed flexible cable of suitable copper conductor and all labour, inside hazardous area. | ITEM CODE 46 | 5 | Nos. |
| 37 | 370 | Dismantling of old light fittings along with cables and accessories from highmast and stacking it somwhere within the Terminal premises. | ITEM CODE 47 | 80 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
