}

Tender For Open Gym In Different Places And Park In Urban Area Behror Open Jim Work, behror-Rajasthan

Department Of Local Bodies has published Tender For Open Gym In Different Places And Park In Urban Area Behror Open Jim Work. Submission Date for this Tender is 31-03-2020. gymnasium Tenders in behror Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

24099332
Tender For Open Gym In Different Places And Park In Urban Area Behror Open Jim Work
Open Tender
Indian
Rajasthan
behror
31-03-2020

Tender Details

tender for Open gym In Different Places And Park In Urban Area Behror Open Jim Work

Key Value

Document Fees
INR 500 /-
EMD
INR 75360.0 /-
Tender Value
INR 37.68 Lakhs /-

BOQ Items

NAME OF WORK : DIFFERENT PLACES IN URBAN AREA & PARK IN OPEN JIM WORKS
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m item 1 16 CUM
2 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40\nmm nominal size). item 2 4 CUM
3 3 Providing and laying cement concrete in retaining walls, return walls,\nwalls (any thickness) including attached pilasters, columns, piers,\nabutments, pillars, posts, struts, buttresses, string or lacing courses,\nparapets, coping, bed blocks, anchor blocks, plain window sills,\nfillets etc. upto two stories, excluding the cost of centring, shuttering\nand finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size) item 3 15 CUM
4 4 SURFING BOARD providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 400mm (Height), to build up the muscle groups of the waist, enhance the body / coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast ? 250 mm & 10mm thick. The footrest shall be made from high quality fiber reinforced plastic material, High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger! Nerolac with minimum 60 to 70) micron thickness, complete in all respect including fixing the MS. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately).\n item 4 4 EACH
5 5 CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Width) x 1750mm. (Height), to enhance the mobility of upper and Lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB “C" class welded with M.S, round base plate atleast ?250 mm & 10mm thick. The Handle | Frame shall be made up of atleast 25NB “C” Class G.1, Pipe. The footrests shall be made from | Aluminum casting material of size not Jess than 130 mm X 310 mmX05mm thickness and mounted on M.S. Plate of Size 130mmx3 10mm x 03 mm thick. High tensile steel with galvanized | nuts and bolts shall be used for assembly The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger! Nerolac with minimum 60 to 70 Micron thickness, complete in all ‘cement concrete to hold the whole structure, under ‘espect including fixing the M.S. holdfast the directions of Engineer -in-charge to full fil item 5 4 EACH
6 6 THAI-CHI SPINNER (2 WHEEL) Providing and fixing of thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280 mm (Height) to increase mobility of shoulder. Elbow and hip-knee The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast ? 250 mm& 10 mm thick. Hight tensite S.S. nut bolts shal be used for assembly. The power coating shall be done with pure polyester powers from Ackzonoble/Berger/Nerolac Paints with 60 to 70 micron thickness. Complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. Under the directions of Engineer to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3 ( The cement concrete and excavation work shall be paid separately item 6 4 EACH
7 7 SEATED PULLER Providing and fixing of seated Puller of size not less than 1900mm (Length)x 740mm (Width)x 1920mm (Height). To enchance the strength of upper Itmbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast ?250mm & 10mm thic. The handle frame shall minimum of 32NB “C” class G.I.pipe. the seat frame minimum of 32NB “C’ class G.I. pipe. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanized nuts&bolts shall be used for seperately. The powder coating shall be done with pure polyester powders of Ackzonoble/Berger/ Nerolac Paints with 60 to 70 micron thickness. Complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. Under the directions of Engineer to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4 ( The cement concrete and excavation work shall be paid separately. item 7 4 EACH
8 8 LEG PRESS Providing and fixing of size not less than 1840mm (Length)x360mm (Width) x 1860 mm (Height) to build up the muscles of enchance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate atleast ? 250 mm& 10 mm thick.. The sleeve frame minimum of 100 OD and of M.S. seamless Pipe with thickness 5 mm. This sleeve should be disassembled from main frame. The Footrests shall be made from casted Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The Powder coating shall be done with Pure polyester powder of Ackzonoble/ Berger/Nerolac Paints with 60 to 70 micron thickness. Complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. Under the directions of Engineer to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5 ( The cement concrete and excavation work shall be paid separately. item 8 4 EACH
9 9 SITUP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) * 1140mm | (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G,1. pipe minunum of 80NB “C” class welded with M.S. round base plate aleast ? 250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32 NB oe be made from “C" class GI pipe. The powder coating, shall be done with Pure ; polyster powder Ackzonoble/ Berger! Nerolac Paints with 60 to 70 micron thickness, complete 6 ocr ; mec including fixing the M.S. holdfast in cement concrete to hold the whole structure, the directions of Engineer-in-charge to fullfil the functional requirement, The indicative design as per enclosed Photo no. 6, (The cement concrete and excavation work shall the paid separately). item 9 4 EACH
10 10 CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length),x710mm(Width)x2200mm(Height) to enchance the strength of upper limbs and the museles in chest& back and promote cardio pulmonary function. The main steucture frame shall be made from Gi.I.pipe minimum of 80NB “C” Class welded with M.S. round base plate atleast ?250 mm& 10mm thick. The handle frame shall be made up from atleast 32NB “C” class G.I. pipe. The seats and thick seat to be fitted on the outer frames shall be made up of M.S. sheet of size not less than 330mm X 300mmX 2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut & bolts shall be used for assembly. The Powder coating shall be done with Pure polyester powders from Ackzonoble/ Berger/Nerolac Paints with 60 to 70 micron thickness. Complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. Under the directions of Engineer to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7 ( The cement concrete and excavation work shall be paid separately. item 10 4 EACH
11 11 POMMEL HORSE Providing and fixing of pommel horse of size no less than 2150mm (length) 800 mm (width) * 800 nm. (Height), to enhance flexibility of waist. lower limbs and abodomen The made from G.I. pipe minimum of 80NB “C" class welded with M.S. round base plate ?250 mm & 10min thick. The handle frame is minimum of 32NB shall be made from "c" class G.1. pipe. The main structure frame shall be colsing caps shall be maid up i quality fibre Twister plate to be fitted on the bottom frame shall be made up of M.S Round Plate quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts ball be used for assembly. The powder coating shall be done with Pure Polyester powders from | Ackzonobe! Berger! Nerolac Paints with 60 to 70 micron thickness. complete in all respect ‘including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the iieections of Engincer-in-charge to fullfil the functional requirement, The indicative Desten/Photo is as per enclosed Photo no.8. (The cement concrete and excavation work shall be paid separately’) item 11 4 EACH
12 12 DUBLE STANDING TWISTER Providing and fixing Double Twister Standing of size not less than 1500 (length) 600mm with 1300 nm. (Height), to enhance flexibility of waist. made from G.I. pipe minimum of 80NB “C" class welded with M.S. round base plate main structure frame shall be made ?250 mm & 10min thick. The handle frame is minimum of 25NB shall be made from "c" class G.I. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S Round Plate of minimum size ?300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts ball be used for assembly. The powder coating shall be done with Pure Polyester powders from | Ackzonobe! Berger! Nerolac Paints with 60 to 70 micron thickness. complete in all respect ‘including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the direction of Engincer-in-charge to fullfil the functional requirement, The indicative design /Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately’) item 12 4 EACH
13 13 STANDING SEATING TWISTER Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540 mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children, The main structure frame shall be made from G,l. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast ?250 mm & 10mm thick. The botton frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from “C” class Gl. pipe. The handle frame of Seating & Standing twister of minimum 25NB & Foot resting frame of seating side shall be made from “C” class G.i. pipe minimum off 25 NB The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up off a rio Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts used for assembly. The powder coating shall be done by Pure Polyester powder off ackzonobe/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S, holdfast in cement concrete to hold the whole structure, under the direction Engineer-in-charge to fullfil the functional requirement. The indicative Wil sae aS per enclosed Photo no. 10, (Thecement concrete and excavation work shall be paid the separately). item 13 4 EACH
14 14 CHEST CUM SHOULDER PRESS Providing and fixing OF Chest Press Cum Seated Puller of size not less than 2000mm Length) 710mm (width) x 2200mm height theof upper limbs and the muscles shoulder the main structure frame shall made frome The Main structure made from G.I. pipe minimum of 80nb "c" class welded width m.s. round base plate at least ?250 mm & 10mm thick. The seats and the back rest to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm x 300 x 2mm thickness, Closing Caps shall be made up of high quality Fiber reinforce plastic material high tensid steel with galvanized nuts & bolts shall be used for assembly, The be done with Pure Polyester powders from Ackzonoble/ Berger! Nerolac paint with 60 to 70 micron thickness, complete in all respect including fixing the MS. holdfast the whole structure,under the directions of Engineer-in-charge Concrete cement. The indicative Design/Photo is eticlosed Photo no. 11 excavation work shall be paid separately). item 14 4 EACH
15 15 PUSH UP BARS Providing and fixing of Push Up Bars of size not less than 1220mm (Length)x 550mm (Width)x 1700mm (height), To strength and stamina of the body the main structure frame shall be made form G.I. pipe minimum of 80NB “C” class welded with M.S. round base plate at least ? 250 mm& 10mm thick. The handle frame minimum of 25 NB shall be made from “C” Class G.I. pipe, Closing Caps shall be made up of high quality Fiber be made from rainforced Plastic material High tensile steel with galvanized nuts& bolts shall be used for assembly, The power coating shall be done with Pure Polyester powders of Ackzonoble/Brger/Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S.holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-change to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12.(The cement concrete and excavation work shall be paid separately) item 15 4 EACH
16 16 Annual Maintenance of all open air gym equipment fixed at various park in Behror for a period of 3 year (After one year free maintenance) including replacing of any or all damaged part and running satisfactory in all respect. Maintenance payments shall be made proportionately for each quarter. For First Year (3% of total cost of equipment’s which is 3238604 ) item 16 1 PERCENT
17 17 Annual Maintenance of all open air gym equipment fixed at various park in Behror for a period of 3 year (After one year free maintenance) including replacing of any or all damaged part and running satisfactory in all respect. Maintenance payments shall be made proportionately for each quarter. For Second Year (3.5% of total cost of equipment’s which is 3238604 ) item 17 1 PERCENT
18 18 Annual Maintenance of all open air gym equipment’s fixed at various parks in Behror for a period of 3 years(After one year free maintenance) including replacing of any or all damaged parts and running satisfactory in all respect. Maintenance payments shall be made proportionately for each quarter for third year (4% of total cost of equipments which is 3238604) item 18 1 PERCENT
19 19 Supply and fixing of Instruction board of size 4’x 6’ made of digital vinyl print gloss lamination& pasted on 3mm ACP sheet fixed over 2.0 mm thick MS sheet, framed on 32 mm dia MS pipe, supported on 50mm dia MS pipe which goes 600 mm below ground level with hold fast including welding and painting design and drawing as per photograph no. 13, all complete under directions of engineer-in-charge. ( The cement concrete and excavation work shall be paid separately). item 19 4 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail