}

Development Of New Garden Along The All Bye Lanes To Enhance Greeneries At Industrial Estate Bongaigaon Dist Bongaigaon, IE Bongaigaon-Assam

Assam Industrial Infrastructure Development Copr-AIIDC has published Development Of New Garden Along The All Bye Lanes To Enhance Greeneries At Industrial Estate Bongaigaon Dist Bongaigaon. Submission Date for this Tender is 08-05-2020. Gardening Tenders in IE Bongaigaon Assam. Bidders can get complete Tender details and download the document.




Tender Notice

24048126
Corrigendum : Development Of New Garden Along The All Bye Lanes To Enhance Greeneries At Industrial Estate Bongaigaon Dist Bongaigaon
Open Tender
Indian
Assam
IE Bongaigaon
08-05-2020

Tender Details

Development Of New Garden Along The All Bye Lanes To Enhance Greeneries At Industrial Estate Bongaigaon Dist Bongaigaon

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Mar-2020 Extension of time Date 18-04-2020
2 17-Apr-2020 Time extension Date 28-04-2020
3 18-Apr-2020 Extension-II Date 08-05-2020
4 07-May-2020 Corrigendum III Other 08-05-2020

Key Value

Document Fees
INR 1700 /-
EMD
INR 112600.0 /-
Tender Value
INR 56.25 Lakhs /-

BOQ Items

Name of Work: Development of new garden along the all bye lanes to enhance greeneries at Industrial Estate, Bongaigaon, dist. Bongaigaon
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation for foundation trenches of walls, retain -ing walls, footings of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all leads and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. I) Upto a depth of 2m below the existing ground level . a) In ordinary soil item1 204.23 Cum
2 2 Raising low site around building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc complete including payment land compensation, FR, ST, municipal gate fees, if nay monopoly duty etc. (Profile, measurement to be taken and 12.50% deduction for shrinkage to be made from total quantity) as directed and specified.\n(b) Other than Guwahati City\nIn general land filling of the low lying area,\nFor garden purpose\n item2 11941 Cum
3 3 Providing soling in foundation and under floor at all level with stone/ best quality picked jhama bricks,sand and packed and laid to level etc complete\n(a) Brick flat soling\n item3 217.4 Sqm
4 4 Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brick work etc. as directed and specifoed including dewatering if necessary and curing complete (shuttering where necessary shall be be measured and paid separately) a) In Prop. 1 cement : 3 Sand : 6 Coarse agg. by volume item4 10.98 Cum
5 5 Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately ) (I) Using mixture machine (A ) In sub-structure upto plinth level. I) Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. N) Without using admixture, plasticiser b) M 20 grade concrete or Prop 1:1.5:3 item5 34.04 Cum
6 6 Providing form work of ordinary timber planking so as to give a rough finish including centering , strutting , and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work. 3.1.1.1. Foundation, footing, base of column, raft, and mass concrete works etc. (b) Using 25 mm thick plank.\n item6 181.17 Sqm
7 7 Sides of tie beams, plinth beams, grade beams etc.at or below ground level (a)) Using 38 mm thick plank item7 395.28 Sqm
8 8 Columns, pillars ,posts & strut a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face. I) Using 38 mm thick plank item8 927.81 Sqm
9 9 1st class brick work in cement mortar including racking out joints and dewatering if necessary, and curing complete as directed in super structure above plinth level up to 1st floor level (protruding M.S rod/ Torsteel of column to embedded in cement mortar and will be measured and paid separately)(A) 112 mm thick brick wall (a) In cement mortar prop 1:4.\n item9 296.46 Sqm
10 10 15 mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4\n item10 1108.98 Sqm
11 11 Supplying, fiiting & fixing chain link fencing of 10 SWG, GI Wire 50 mmx 50mm mesh fitted to M.S angle iron post at 2000 mm apart of specification detailed below including supplying fitting and fixing hook eye bolts including three horizontal lines of GI wire 10 SWG at top middle and bottom and with one vertical line to each fencing tight and erect complete, including one coat of primer painting to MS angle iron post in PCC base etc with following. a) Corner and end posts with M.S angle of size 50mmx50mmx5mm and length not less than 1800 mm only duly slotted and bottom torqued with two numbers as stay posts. b) Intermediate posts with M.S angle of size 40mmx40mmx5mm and length not less than 1800 mm only duly slotted and bottom torqued and splayed. c) Stay posts with M.S angle of size 35mmx35mmx5mm and length not less than 1800 mm only duly slotted and bottom torqued and spalyed. All MS angle iron posts are to be fitted to PCC base embedded not less than 600 mm ( PCC work shall be measured and paid separately) New one item11 1330.78 Sqm
12 12 Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. item12 1108.98 Sqm
13 13 Applying priming coat over new steel and metal surface up to 100mm in width/girth after and preparing the surface by thoroghly cleaning oil, grease,dirt and other foreign matter and including preparing surface even and sand papering and knotting. (a) With ready mixed “red-lead” primer. For angle posts\n item13 1163.88 Sqm
14 14 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. item14 296.46 Sqm
15 15 Painting two coats (excluding priming coats) on new steel and metal surface with enamel paint to give an even shade including cleaning surfaces of dirt, dust and foreign materials sand papering and stopping.\n(ii) Surfaces up to 100 mm in width/girth.\n(b) High Gloss (Asian Paint/Berger paint/ICI paint/ J & N paint/ Nerolac).\n item15 1163.88 Sqm
16 16 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(i).Surfaces over 100mm in width or girth.\nb). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).\n item16 2635.2 Sqm
17 17 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S Codes for R.C.C works/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, support etc complete.(Up to first floor)\nb) Other ISI approved TMT reinforcement bar (SRMB/SAI/BISCON/XTECH)\n ( for Assam type building, drain works, retaining wall & boundary wall etc.)\nFooting,\n item17 20.313 Qtl
18 18 ISI approved – M.S Reinforcement bar item18 17.57 Qtl
19 19 Land Scapping - Purchasing cost of Thuja from Nursery/ Bongaigaon Social Forestry item19 320 Nos
20 20 Purchasing cost of Bakul from Nursery/ Bongaigaon Social Forestry item20 200 Nos
21 21 Purchasing cost of Radhasura from Nursery/ Bongaigaon Social Forestry item21 200 Nos
22 22 Purchasing cost of Krishnasura from Nursery/ Bongaigaon Social Forestry item22 200 Nos
23 23 Purchasing cost of Agaru/ Azar/ Nahar from Nursery/ Bongaigaon Social Forestry item23 100 Nos
24 24 Purchasing cost of Radhasura from Nursery / Bongaigaon Social Forestry item24 100 Nos
25 25 Carrying charges of the above flower plants/ tree plants from Bongaigaon Social Forestry by mini truck item25 5 Nos
26 26 Procuring of cow dung manure item26 10 trucks
27 27 Labour cost for plantation and maintenances for one time item27 1120 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail