Providing 40 Kva Dg Set And Allied Items For Stp Manesar Distt . Gurugram -2 Earth Work In Excavation In Foundations, Trenches, Etc. In All Kinds Of Soils, Not Exceeding 2 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil, Clear From The Edge Of Excavation And Subsequent Filling Around Masonry, In 15 Cm Layers With Compaction, Including Disposal Of All Surplus Soil, As Directed Within A Lead Of 30 Metres. ( Hsr 6.6 +Cp 425% ) 3 Cement Concrete 1 : 6 : 12 With Brick Ballast 40 Mm Nominal Size In Foundation And Plinth. ( Hsr 10.30+Cp 450% ) 4 Cement Concrete 1 : 1.5 : 3 With Stone Aggregate 20 Mm Nominal Sie In Foundation And Plinth.. ( Hsr 10.42+Cp 450% ) 5 First Class Brick Work Laid In Cement Sand Mortar 1:4 In Foundation And Plinth. ( Hsr 11.4 ( C.P.@ 650 % ) 6 12 Mm Thick Cement Plaster 1:4. ( Hsr 15.5 +Cp 600% ) 7 Painting Two Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On New Wood Work Or Metallic Or Plastered Or Concrete Surfaces To Give An Even Shade. ( Hsr 16.3+Cp 230% ) Ist Quality 8 Applying Priming Coat With Metal Primer On New Steel Or Iron Work Including Preparation Of Surface. ( Hsr 16.9+Cp 230% ) Ist Quality 9 Wrought Iron And Mild Steel ( Using Angles, Flats Square Bars, Tees And Channels ) Ladders, Grills, Gratting Frames, Window Guards, Iron Doors Openable Or Fixed Stair Case Or Parapet Or Any Other Type Of Railing, Gates And Tree Guards Etc., Including Cost Of Screws And Welding Rods Or Bolts And Nuts Complete Fixed In Position. ( Hsr 18.12+Cp 500% ) 10 Providing And Fixing Hard Drawn Steel Wire Fabric 75 Mm X 25 Mm Rectangular Mesh With 3.25 Mm Dia Wire Fixed On Steel Windows Of Standard Rolled Sections With 3 Mm Thick Flat Iron Cover Moulding Of 12.5 Mm Width Fixed With Machine Screws Welded Complete In All Respect. ( Hsr 18.33+Cp 500% ) 11 Supplying, Hoisting And Placing In Position Tubular Trusses Including Runners, Purlins, Consisting Of Steel Tubes Conforming To I.S. Specifications Of Tested Quality Duly Welded With Fillet Welds 6 Mm Thick Through-Out Including Wind Bracing. Open End Of Pipe Sealed With 3 Mm Thick Plate Including The Cost Of Nuts And Bolts Where Bolts Connections Are Specified At Flange Joints Including One Coat Of Ready Mixed Red Oxide Zink Cromate Primer Of Approved Quality Assembling And Fixed In Positon Complete In All Respect. ( Hsr 18.14+Cp 500% ) 12 Earthing. ( Hsr 31.22+Cp 350% ) 13 Iii ) Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosures With Cover Plate Having Locking Arrangement And Watering Pipe Etc. ( But Without Charcoal Or Coke And Salt ) Complete As Equired. 14 Iv ) Earthing With Tinned Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories And Providing Masonry Enclosures With Cover Plate Having Locking Arrangement And Watering Pipe Etc. ( But Without Charcoal Or Coke And Salt ) Comlete As Equired. 15 V ) Extra For Charcoal Or Coke And Salt For G.I. Plate Or Copper Plate Earth Electrode. 16 X ) Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode As Required. 17 Xi ) Providing And Fixing 25 Mm X 5 Mm Gi Strip In 40 Mm Dia G.I Pipe From Earth Electrode As Required. 18 Xiv ) Pdg. And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required With All Labour And Material. 19 Xv ) Pdg. And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required With All Labour And Material. 20 S / E Of Under Ground Cable Loose In Existing Pipe Or Trenches Including Necessary Connection, Digging And Refilling Of Trenches. ( Hsr 31.26+Cp 140% ) Xxvii ) 50 Sq. Mm 3.5 Core Cable ( Armoured ) 21 Supply And Erection Of Suitable Compression Type Brass Cable Glands For Underground Cable. ( Hsr 31.28+Cp 140% ) Iv ) 70 Sqmm To 95 Sqmm Cable 3 To 3.5 Core . Iii ) 25 Sqmm To 50 Sqmm Cable 2 To 4 22 Miscellaneous. ( Hsr 31.35+Cp 130% ) ( Ix ) Supply And Erection Of Aluminium Lugs Heavy Duty Including Crimping Etc. Upto The Entire Satisfaction Of The Engineer-In-Charge Of The Work. E ) 25 Sqmm . 23 G ) 50 Sqmm 24 Supply, Installation, Testing And Commissioning Of Wall / Free Standing Floor Mounting Dust And Vermin Proof Compartmentalized Cubical Panel Made Out Of 2 Mm Thick Crca Sheet, Required Hardware 3Mm Thick Bakelite Sheet Provided All Along The Bus Bar And Cable Alley Separating Switches Compartment And Supporting Suitable Channel Duly Painted By 2 Coat Of Zinc / Red Oxide Primer Followed By 2 Coats Of Powder Coating In Grey Or Required Shade After Rinsing. The Panel Having Pu / Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness Separate Detachable Gland Plate Ms Base Channel Hinged Door With Inter Locking Arrangement For Equipment / Switch Wear.Transparent Acrylic Sheet Shall Be Provided In Front Of Bus Bar Compartment To Prevent Direct Access To Bus Bar Bakelite Sheet 3Mm Thick For Separately Cable Alloey To Bbc From Switch Chamber Extended Solid Copper Bars Up To Cable Alleys Shall Be Provided For Outgoing Connection Which Shall Be Paid As Extra Items. Side Walls And Cable Alley Compartments Shall Be Having Bolted Type Doors With Detachable Extension Type Structure. The Panel Will Be Complete With Control Wiring ( Copper ) And Fuse Protection ( Only Outer Area On All Sides Shall Be Measured ) As Per Hsr 31.63 ( C.P @ 0% ) 25 Supplying And Fixing Of Copper Bus Bar Duly Tinned By Means Of Smc / Dmc Type Insulator High Tensile Nuts And Bolts Spring Washers Fixing To Same In Existing Panel Including Bending, Cutting In Required Shape And Size And Insulation With Colour Coding Heat Shrinkable Pvc Insulation Complete In All Respect As Per Hsr 31.64 ( C.P @ 0% ) 26 Pdg. And Fixing Digital Metering Equipment For Lt Cubical Panel Consisting Of 96Mmx96mm 0-500V, Volt Meter With Selector Switch, Amp. Meter ( Of Required Ratio Up To 600 / 5 Amp. ) With Selector Switch And Required C.Ts 3 Nos., A Set Of 3 No Phase Indicating Lamps Ryb Led. Hsr 31.65 ( C.P @ 0% ) 27 Supply & Fixing Of Rotary Handle For On / Off Operation Of Existing Mccb In The Lt Panel Including Fixing The Same In Position With All Labour And Material Required To Complete The Job In All Respect..Hsr 31.66 ( C.P @ 0% ) I ) Rotary Handle Up To 125A, Mccb 28 S / E Of Mark Double Walled Corrugated ( Dwc ) Hdpe Pipe Laid 1 Mtr. Below Ground Level Including Diging And Refilling Of Earth Including Cost Of Suitable Size Socket / Cuppler For Hdpe Pipe Including The Cost Of Labour And Material Required To Complete The Job In All Respect Upto The Entire Satisfaction Of Engineer-Incharge Of The Work. ( Hsr 31.67+Cp 0% ) ( Ii ) Hdpe Pipe 90 / 75 Mm Outer Dia / Inner Dia. 29 Supply And Erection Of Moulded Case Circuit Breaker Single Pole / Four Pole On Wall Or On Existing Pedestal Including Bonding To Earth And Necessary Connections. ( Hsr 31.69 ) ( Cp 0% ) Iv ) Four Pole Mccb 6 To 63 Amp 30 V ) Four Pole Mccb 100 Amp 31 S / E Of Heavy Duty 4 Pole On Load Change Load Over Breaker Switch Suitable For Operation Of 415 Volt Ac Supply Complete With Handle Assembling Having Door Interlock And Interlocking Arrangement On Existing Panel I / C Making Necessary Connections With Petty Material Required To Complete The Job. Hsr 31.74 ( C.P @ 0% ) Ii ) 100 Amp 4 Pole On Load Changeover Switch 32 Total Hsr 33 Ns Item 34 S / E Of Ms Bucket Stand Suitable For 6 Nos. Fire Buckets ( Without Buckets ) Made Out Of Angle From Of Size 40 Mm X 40 Mm X 6Mm I / C The Cost Of Welding, Labour And Two Coats Of Approved Paint Including One Coat Of Red Oxide. 35 S / E Of Fire Buckets Of 9 Liters Capacity Made Out Of 24 Gauge Gi Sheet& Duly Painted With One Coat Of Red Oxide And Two Coat Of Approved Paint In Red Colour Written With Fire As Per Fire Protection Complete With Necessary Sand Filling In The Bucket And Labour Etc. 36 S / E Of Fire Existingusher Isi Marked C02 Type Of 4.5 Kg Capacity As Per Is:7285 Duly Erected / Hangs On Wall With Hooks I / C The Cost Of Hook, Screws Etc With All Labour And Material Required To Complete The Job In All Respect Upto The Entire Satisfaction Of The Engineer In Charge Of The Work. 37 S / E Of Fire Existingushers Isi Marked Dry Chemical Powder Type Of 4 Kg Capacity As Per Is Duly Erected / Hangs On Wall With Hooks I / C The Cost Of Hook, Screws Etc With All Labour And Material Required To Complete The Job In All Respect To The Entire Satisfaction Of The Engineer- In - Charge Of The Work. 38 Supply & Erection Of Of Hi - Rib Profilrd Sheeting 1000 - 1020 Mm Cover Width 28.30 Mm Creast 200 - 150 Mm Centre To Centre Manufactured From 0.50 Mm Tct Hi - Tensile Bars Galvalum Sheet ( Az - 150 Gm Aluminium Zink Alloy Metallic Coating Sheet ) Complete With All Labour And Petty Material Required To Complete The Job I / C Carriage, Loading , Unloading, Westage, Fixing On Existing Ms Structure With Stsc Screws, Nuts, Bolts & Washers Etc.As Required Upto Entire Staisfactrion Of Engineer - In - Charge Of Work. 39 Supply, Installation, Testing And Commissioning Of 40 Kva Water Cooled, Silent Diesel Generating Set Complete With Alternator Rated At 3 Phase, 415 Volts, 0.8Power Factor, 50 Cycle Per Second, 1500 Rpm With Amf Panel ( Outside The Canopy ) , Accoustic Enclosure And Battery Charger Etc. ( To Be Installed Out Door On Existing Plateform Excluding Cost Of Plateform ) :- 40 ( A ) Diesel Engine:-Engine Multy Cylinder, Developing Output Bhp As Per 40 Kva Dg Set, At 1500 Rpm, Vertical Totally Enclosed Water Cooled, Comprising Compression Ignition, Electric Start, 4 Strok High Speed Diesel Engine Conforming To Is-4722, Iso – 3046, Bs – 5514. The Engine Shall Be Complete With All Standard And Electrical Accessories As Per Standard Supply Of Manufactures. The Engine Shall Be Coupled With 3 Phase 415 Volts 50 Cycle, 0.8 Pf And 1500 Rpm, Alternator As Per Is 4722 / Bis 2613 Rated For 24 Hours Of Continuous Operation With 10 % Over Load Capacity For One Hour In Every 12 Hours In Every 12 Hours And Comprising With:- 41 A ) Amf Panel Of Required Size Complete With All Accessories As Required. 42 B ) On / Off Start Keys 43 C ) Lube Oil Pressure Guage 44 D ) Fuel Tank Having Capacity To Run The D G Set Min. 8 Hours In First Fill. 45 E ) Residential Silencer Of Required Size And Length I / C All Necessary Material As Required. 46 F ) 1 No. 12 Volts, 130 Ah, Dc Mtc. Free Batteries With Leads And Containers. 47 G ) Avm Pads Fitted On Base Frame. 48 H ) The Base Frame Would Be Fabricated From Suitable M.S. Channel Suitable Machined To Perfect Alignment Of The Engine And Alternator With Rigid Construction And Necessary Reinforncement To Ensure Minimum Viberation 49 I ) Any Other Accessories To Make The Generating Set Functional Shall Be Installed As Per Manufactures Specification 50 B ) Battery Charger :-Electronic Battery Charger Shall Be Installed Of Required Size And Rating For Charging Of Battery Of D.G. Set. 51 C ) Acoustic Enclosure:-It Shall Be Provided As Per Technical Specification As Follows:- 52 1 ) Construction And Painting:- 53 I ) The Enclosure Shall Be Fabricated Out Of 1.60 Mm Thick ( 16 Swg ) Crca Sheet Silent D.G.Set Container Shall Be Of Modular Construction With The Provision To Assemble And Dismantle Easily At Site Of Work. 54 Ii ) The Base Frame Shall Be Made Of Ismc Of Suitable Section ) 55 Iii ) Durable Industries System Is To Be Provided On The Doors And Doors Are Fitted With High Quality Epdm Gasket To Avoid Leakage Of Sound . 56 Iv ) Weather Proof Anti Corrosion Treatment To Be Provided To The Entire Structure With Powder Coating. 57 V ) Neutral / Body Earthing Points At The Side Of Enclosure Are To Be Provided. 58 Vi ) Emergency Stop Push Button Shall Be Provided Outside The Container. 59 Vii ) A Tube Fitting With Tube Rod For Proper Light Inside Canopy Shall Be Provided. 60 2 ) Acoustic Insulation:- 61 I ) Sound Proofing Of The Enclosure Shall Be Done With Quality Rock Wood / Mineral Wood Conforming To Is-8133-1933 Of 25 Mm Thickness And Density At 30 Kg / M Compressed Along With 3 Mm Thick Vinyl Sheet And Non Ferrous Sheet. 62 Ii ) Exhaust Pipe Is To Be Thoroughly Insulated By Covering It With Glass Wool And Further Claded With Aluminium Sheet. 63 75 Db A Noise Level As Per Latest Central Pollution Control Board ( Cpcb ) 64 Note:-Any Other Material Required To Complete The Acoustic Enclosure Shall Be Installed As Per Manufactures Specifications. ( App. Dnit For Const. Of Police Station Rohrai Distt. Rewari ) .
