}

Special Repairs To Building No 108 Or Md Accn And Bldg No 144 Rhq Complex 3 Ttr At Bambolim Goa, GE PANAJI GOA-Goa

Military Engineer Services-MES has published Special Repairs To Building No 108 Or Md Accn And Bldg No 144 Rhq Complex 3 Ttr At Bambolim Goa. Submission Date for this Tender is 14-05-2020. Building Repair Tenders in GE PANAJI GOA Goa. Bidders can get complete Tender details and download the document.




Tender Notice

24032613
Corrigendum : Special Repairs To Building No 108 Or Md Accn And Bldg No 144 Rhq Complex 3 Ttr At Bambolim Goa
Open Tender
Indian
Goa
GE PANAJI GOA
14-05-2020

Tender Details

Special Repairs To Building No 108 Or Md Accn And Bldg No 144 Rhq Complex 3 Ttr At Bambolim Goa

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 13-Apr-2020 EXTENSION OF BID DATE Date 23-04-2020
2 15-Apr-2020 EXTENSION OF BID DATE FIRST Date 14-05-2020

Key Value

Document Fees
INR 1000 /-
EMD
INR 126000.0 /-
Tender Value
INR 67.24 Lakhs /-

BOQ Items

Name of Work : SPECIAL REPAIRS TO BUILDING NO: 108 (OR MD ACCN) AND BLDG NO- 144 (RHQ COMPLEX) 3 TTR AT BAMBOLIM GOA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Schedule A Part I\nDemolition of existing water proofing treatment any type from top surface of roof slab and remove the material obtained to low lying area all as directed 1150 Sqm
2 2 M&L for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as spcified, weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4 litres per sqm on surface to provide a layer of APP membrane by torching applications including sealing the over lap while torching with 150mm on ;length side and 100mm wide side as per manufacturer instructions incl joints and change in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1 kg per Sqm as all as specified and directed. 1150 Sqm
3 3 Taking down cement plaster on brick or concrete surface including raking out joints, hacking for key, scrubbing out with water, etc. complete. 3050 Sqm
4 4 M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using water proofing compound. Note :- Water proofing compound will be measered seperatly. 1700 Sqm
5 5 Supply only integral water proofing compound. 341 Kg
6 6 M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement. 900 Sqm
7 7 M & L for plastering 10 mm thick on brick or concrete surface in CM (1:3) on ceiling to be finished even & smooth without using extra cement. 450 Sqm
8 8 M&L for two coat of oil bound distemper on plastered surfaces of walls including prepartion of new surfaces and chalk whiting. 700 Sqm
9 9 M&L for complete removal of existing treatment and applying two coat of oil bound distemper on plastered surfaces of walls including prepartion of old surfaces. 2917 Sqm
10 10 M & L for complete removing of existing treatment, preparation of old plastered surface and applying 2 coats of white wash on ceiling. 1178 Sqm
11 11 M & L for Preparation of new plastered surface and applying 3 coats of white wash on ceiling 450 Sqm
12 12 M & L for 3 coats of coats of white wash incl preparation of new surface of walls. 200 Sqm
13 13 M & L for complete removing of existing treatment, preparation of old plastered surface and applying 2 coats of white wash on walls 150 Sqm
14 14 M & L for complete removal of existing treatment and applying two coats of acrylic anti fungal exterior base paint over a coat of primer on walls including prepartion of old painted surfaces complete all as specified. 471 Sqm
15 15 M & L for preparation of new plastered surfaces of any description and applying two coats of acrylic anti fungal exterior base paint over a coat of primer on walls complete all as specified. 1700 Sqm
16 16 S & F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt weight n exc 4 Kg per Sqm 130 Kg
17 17 Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thick (unreinforced). 24 Cum
18 18 M & L for PCC 1:3:6 type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement. 200 Sqm
19 19 M & L for PCC (1:2;4) type B1 using 20 mm graded aggregate as in flooring 40mm thick finished even and smooth using extra cement. 225 Sqm
20 20 M & L for PCC (1:2;4) type B1 using 12.5 mm graded aggregate as in padding over flat roof 25mm thick average thickness finished even and smooth without using extra cement. 30 Cum
21 21 M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:6 complete. 36 Sqm
22 22 M&L for Machine cut kota slab 20-25mm thick in risers of step skirting dado over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete. 10 Sqm
23 23 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises 410 Sqm
24 24 M&L for cement concrete type B1 1:2:4 using 20mm graded stone aggregate25mm thick as in flooring etc. 60 Sqm
25 25 M & L for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base. 60 Sqm
26 26 M&L for hardcore of gauge n. exe 63 mm deposited, spread, levelled in layers n. exe 15 cm thick, watered rammed to a true surface using broken bricks. 4 Cum
27 27 M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm th screed bed in CM 1:6. 100 Sqm
28 28 M&Lfor glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 320 Sqm
29 29 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6. 52 Sqm
30 30 Material and labour for polythene film black 50 micron laid in floor of sunken slab. 50 Sqm
31 31 Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) n. exc 1.5 SM & removing from site. 90 Each
32 32 Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 SM but n.exc. 4 SM & removing from site. 85 Each
33 33 Taking down shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm each. 30 Each
34 34 S & F 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints. 2.4 Cum
35 35 S&F glazed, gauged skeleton shutter 35mm thick 2nd class H/W factory made divided in to squares with plain, chamfered of rounded, mitred and reveated sash bars any number prepared to receive glass/gaused etc.edges of framming plain,chamfered or rounded fitted with cut and mitred beads for securing glass/guaged etc 41 Sqm
36 36 S & F 35 mm thick 2nd class H/W Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated 62 Sqm
37 37 S & F 35 mm thick 2nd class H/W factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides. 10 Sqm
38 38 S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 1030 Kgs
39 39 S & F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified 200 Sqm
40 40 S&F 5.5mm thick plain sheet glass ordinary quality and glazing fix with bead in squares n. exc. 0.5 SM in each pane. 110 Sqm
41 41 S & F 4mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane 8 Sqm
42 42 S&F alluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 7.5cm for windows 168 Sqm
43 43 S&F Aluminium alloy wire cloth fixed 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads in doors and windows 95 Sqm
44 44 Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg. 120 RM
45 45 Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drawing. 36 Sqm
46 46 M&L for preparing old wood or wood based surfaces of any description,over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of pink primer 240 Sqm
47 47 M&L for preparing new wood or wood based surfaces of any description,over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of pink primer. 260 Sqm
48 48 S&F 100 mm long butt higes medium weight cold rolled stainless steel 300 Each
49 49 S&FAluminium anodised barrel tower bolts150mm for door of extruded section and fixed 180 Each
50 50 S&F 250mm length aluminium alloy,anodised,sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts and slidding bolts of extruded sections or cast-aluminium alloy and fixed 55 Each
51 51 Supply and fix door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150mm long. 25 Each
52 52 S&F125 mm long Extruded aluminium alloy handle fabricated anodised. 180 Each
53 53 Taking up or down steel tubing & connections incl cleaning for refixing or removing of pipe 15 mm bore. 240 RM
54 54 All as per Item No.53 above but 20 mm bore pipes. 260 RM
55 55 Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 240 RM
56 56 All as per Item No.55 above but for 25mm bore. 260 RM
57 57 S&F in CPVC 20mm Brass Elbow (3/4 x 1/2) 112 Each
58 58 S&F in CPVC 20mm Brass Tee 32 Each
59 59 S&F in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) 16 Each
60 60 'Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) 16 Each
61 61 'Supply and fixing in CPVC 25mm Tank Adaptor 16 Each
62 62 Supply and fixing in CPVC 25mm Ball valve 16 Each
63 63 Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs. 14 Each
64 64 Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. 14 Each
65 65 S & F in repair wash hand basin , white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar cock 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed 14 Each
66 66 S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete 11 Each
67 67 S&F in repair vitreous china wash down water closet pan pedestal pattern white connecting to trap and to flushing pipe front or back inlet etc. complete all as specified and directed 3 Each
68 68 S& F plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fix in repairs 3 Each
69 69 S&F health faucet with bib tap and telephonic arm with cord and sprayer CP Brass in repair 3 Each
70 70 S&F in repair vitreous china urinals half stall type back or corner wall type complete incl providing and fixing plugs, bedding urinal against wall in cm 1:2 securing urinals to plugs with and incl 60mm long brass screws, pointing around urinals back in cement incl PVC connection 600mm long waste pipe 32mm dia push button tap of cast copper alloy screwed down for iron pipe and fixed complete all as specified and directed 6 Each
71 71 S & F PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as directed 14 Each
72 72 S & F in repairs Fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm. 42 Each
73 73 S & F Towel rail 60 cm long brass chromium plated 20mm dia with brackets fixed to walls. 11 Each
74 74 S & F powder coated curtain rods 25 mm dia 145 RM
75 75 S & F brackets for item above aluminium anodised. 100 Pair
76 76 S&F in repairs stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 15 mm. 32 Each
77 77 S&F in repairs fancy type, chromium plated with long shank and cup (concealed type) stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 15 mm. 16 Each
78 78 S & F PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement 16 Each
79 79 S & F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement 32 Each
80 80 Taking up cast iron 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. 50 RM
81 81 Taking up cast iron 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. 140 RM
82 82 S & F PVC (SWR) pipes 75 mm bore single socketed in any lengths with rubber rings joints fixed to walls 50 RM
83 83 S & F PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings joints fixed to walls 120 RM
84 84 S & F PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings laid in trenches or in floors 20 RM
85 85 S & F 75 mm PVC (SWR) bends any radius provided with access door. 16 Each
86 86 S & F 75 mm PVC (SWR) bends any radius. 32 Each
87 87 S & F 110 mm PVC (SWR) bends any radius provided with access door. 8 Each
88 88 S & F 110 mm PVC (SWR) bends any radius. 32 Each
89 89 S & F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door. 4 Each
90 90 Supply and fix PVC (SWR) vent cowl 75mm Dia. 16 Each
91 91 Supply and fix PVC (SWR) vent cowl 110mm Dia. 16 Each
92 92 M & L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like 2 Cum
93 93 S&F TMT bars, 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. 150 Kg
94 94 M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished, flat surfaces of concrete. 12 Sqm
95 95 S&F steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manuel type thickness 1.25mm gear operated with gear box and crank handle as in repair 8 Sqm
96 96 S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in wall 180 RM
97 97 Dismantling boarding, any description, fixed in any position with nails 20 Sqm
98 98 S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. 20 Sqm
99 99 Extra over rates of block board or veneered particle board for 12 mm external teak wood lipping, 6mm thick fixed with nails 40 RM
100 100 S & F sinks made of stainless steel 1 mm thick kitchen or lavatory with plugs, washers and wastes; incl beeding in CM on dwarf wall or incl fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm including waste fitting brass CP 32 mm with long shanks and fly nuts and waste pipe 32 mm dia including 15 mm dia fancy type chromium plated bib taps 8 Each
101 101 S&F kitchen plate rack made of steel including fixing with cantilever brackets all as specified and directed by Engr-in-Charge 8 Each
102 102 S & F Shower rose with arm brass C.P. with or without swivel joints, 125 mm size, incl fixing to steel pipe or unions in repair 8 Each
103 103 Scdhedule'A' Part-II\nTaking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. 484 Point
104 104 Taking down old sub main wiring including copper/aluminium /GI earth continuity conductor and making good disturbed surfaces all as directed of any size complete all as specified and as directed. 800 RM
105 105 Taking down old unserviceable MCB DBs including all MCB's/MCCB's of any sizes and capacities along with teak wood boards including all fittings/fixtures and making good disturbed surfaces all as specified and as directed. 14 Each
106 106 M&L Point wiring complete with PVC insulated , FRLS, unsheathed, flexible, bright anneled cable 1100 V grade conforming to IS-694 1.5 Sq mm (nominal area) mult-stranded cable with copper conductor drawn through and including heavy grade non metallic rigid PVC casing caping of suitable size (ISI marked) and accessories fixed to walls/ floors/ ceilings / roofs etc. with sunken type pressed steel/ welded MS terminal boxes factory made out of 16 gauge, MS sheet with hold fasts, 3mm thick laminated sheet top cover for mounting of fittings switches, socket outlets, regulators etc. fixed flush with wall including provision of PVC insulated FRLS, unsheathed 1100 Volts grade, 1.50 Sqmm multistranded copper earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for One light point controlled by one, one-way switch, SP, 5 Amps 160 Point
107 107 All as per item 106 but for One ceiling fan point controlled by one, one-way switch, SP, 5 Amps. 51 Point
108 108 All as per item 106 but for One Exhaust Fan fan point controlled by one, one-way switch, SP, 5 Amps. 7 Point
109 109 All as per item 106 but for One switch socket outlet 2/3 pin 5 Amps, on independent board. 115 Point
110 110 All as per item 106 but for One switch socket outlet 3 pin 5 Amps, on same board 40 Point
111 111 All as per item 106 but for One Call bell point controlled by one Bell push 12 Point
112 112 All as per item 106 but for One LED Bulb on Angle holder point controlled by one one-way 5 Amp switch. 29 Point
113 113 All as per item No 106 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed. 70 Point
114 114 S& F, Switch Piano,5 Amps SP one way, 250 Volt grade flush type ISI mark with light/fan complete all as specified and directed. 402 Each
115 115 S&F, socket outlet, 2/3 pin, 5 Amps shutered type complete all as specified and as directed. 155 Each
116 116 S&F, Switch socket outlet, multipurpose, 5 pin 5 /15 Amps, controlled by one switch 15 Amps, (SSC) with fuse and neon indicator, flush type ISI marked complete all as specified and as directed. 70 Each
117 117 S&F electronic socket size, rotary, 5 Amps speed type regulator, 120 - 230 V ISI marked complete all as specified and as directed 51 Each
118 118 S&F Ceiling rose, surface bakelite, 65x 50 mm size, three terminals, ISI marked complete all as specified and directed. 218 Each
119 119 Supply and Fix call bell ding-dong type AC 230 V single pole fixed complete and testing all as specified and as directed. 12 Each
120 120 M & L for Lamp Holder angle/Straight type PVC /Polycarbonate type with back plate suitable for fixing of retrotype LED Bulb all as specified and as directed. 29 Each
121 121 Supply and fixing LED Batten and Tube Light light fittings including tube rod 20 Watt LED and fixed with wall surface, box type made up of anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20mm of sufficient length complete all as specified and directed.\nBajaj Cat No- BCLAB 20 W or equivalant make in Havells/ Philips/ HPL/Crompton\n\n 160 Each
122 122 Supply and Fix LED Bulb retrofit type of capacity 1 X 9 W LED Bulb with Holder straight/ angular type as specified fixed on round/ square PVC block complete all as specified. Make: Bajai/Crompton/Philips/Havells 11 Each
123 123 Supply and Fix coloured type (Red/Green) LED Bulb retrofit type of capacity 1 X 0.5 W LED Bulb complete all as specified. Make- Bajaj/Crompton/Philips/Havells 18 Each
124 124 Supply and Fix single door sheet metal enclosure pre-wired with cable end box vertical type for DB's when MCCB's to be used triple pole and neutral 4 way, 415 Volts with 200 Amps rated bus bar fixed sunk/flush to wall complete all as specified and directed. make- Havells cat No- DHDMTHMKDRA04 or equivalent make in CG/ L&T/Siemens 1 Each
125 125 S&F IP-42 protection distribution board, SPN 08 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. 12 Each
126 126 S&F IP-42 protection distribution board, SPN 4 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. 1 Each
127 127 S&F MCCB, 4 Pole 415 Volts, 125 Amps adjustable type 16 KA breaking capacity complete all as specified and directed. 1 Each
128 128 S&F MCCB, 4 Pole 415 Volts, 63 Amps adjustable type 16 KA breaking capacity complete all as specified and directed. 2 Each
129 129 S&F MCB, TP 415 Volts, 63 Amps capacity complete all as specified and directed. 2 Each
130 130 S&F, MCB, SPN, 240 volts, 40 to 63 Amp complete all as specified and directed. 13 Each
131 131 S&F, MCB, SP, 240 volts, 5 to 30 Amp complete all as specified and directed. 60 Each
132 132 M&L for submain wiring with four runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 Sqmm X 4 Runs drawn through and including heavy grade rigid PVC casing and caping of suitable size, fixed to surface of walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified.\nNote: (a) Four runs of single core copper cables and One run of earth conductor cable with casing capping/conduit will be measured and paid as one unit length. 200 RM
133 133 M&L for submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade rigid PVC conduit of suitable size, concealed in walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified.\nNote: (a) Two runs of single core copper cables and One run of earth conductor cable with casing capping/conduit will be measured and paid as one unit length. 600 RM
134 134 S&F, Earthing of machinery / equipments installed at power house, substation/poles/buildings complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick buried directly in ground (earth pit nt less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5m below normal GL, connected to GI earth wire 4.0 mm diaas earth lead connected by means of bolts, nuts, washers check nuts made out of galvanized iron or steel all as shown on electrical plate No.3 of SSR Part-I connected to continuous earth wire complete all as specified directed. NOTE-1 : The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe 20mm medium grade, GI protection pipe light grade 40mm dia and wire mesh, Test point, charcoal dust/breeze etc all specified and directed. Note -2 : Earthing lead and GI protection pipe beyond 7.5 Mtr will be measured and paid separately under relevant item of schedule.\nNOTE: For SL item No 1 to 134 :- if the tendere quoted the different value for the same item , then the lowest quoted amount will be considered for making payment purpose. 4 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail