Military Engineer Services-MES has published Special Repair Of Md Accn At Aor Panaji Goa. Submission Date for this Tender is 15-05-2020. Civil Work Tenders in GE PANAJI GOA Goa. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 04-Apr-2020 | EXTENSION OF BID DATE | Date | 14-04-2020 |
2 | 13-Apr-2020 | EXTENSION OF BID DATE FIRST | Date | 20-04-2020 |
3 | 15-Apr-2020 | EXTENTION OF BID DATE SECOND | Date | 15-05-2020 |
4 | 29-Apr-2020 | AMENDMENTS ERRATA TO TENDER DOCUMENTS | Other | 15-05-2020 |
Name of Work : SPECIAL REPAIR OF MD ACCN AT AOR PANAJI GOA | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Schedule A Part I\nDemolition of PCC not Exc 15cm thickness ( below and above ground level ) including floor finishes complete all as specified and directed. | 23.7 | Cum | |
2 | 2 | Material and labour for 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement complete all as specified and directed. | 235 | Sqm | |
3 | 3 | M&L for cement concrete 1:3:6 type C1, (20mm graded aggregate) as in copings, include for use of formwork complete all as specified and directed. | 5 | Cum | |
4 | 4 | Taking down cement or cement lime plaster in any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. | 1716 | Sqm | |
5 | 5 | M & L for 15mm thick plastering in CM 1:4 on external surfaces stone or concrete surfaces at any height with using water proofing compound finished even and smooth without using extra cement complete all as specified and directed.\nNote :- Water proofing compound measered seperatly complete all as specified and directed. | 786 | Sqm | |
6 | 6 | M & L for rendering 15mm thick on stone masonary or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge. | 910 | Sqm | |
7 | 7 | Supply only integral water proofing compound complete all as specified and directed by Engineer in charge. | 209 | Kg | |
8 | 8 | M & L Rendering 10mm thick in CM 1:3 on fair faces of concrete surfaces of ceiling, roof projection etc, finished even and smooth without using extra cement including necessary scaffolding etc complete all as specified and directed. | 334 | Sqm | |
9 | 9 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed. | 880 | Sqm | |
10 | 10 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. | 1290 | Sqm | |
11 | 11 | M & L for preparation of newly plaster surface and applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer complete all as specified and directed. | 771 | Sqm | |
12 | 12 | M & L for complete removal of existing treatment including preparation surface by washing, rubbing down and applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer complete all as specified and directed. | 360 | Sqm | |
13 | 13 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of ceiling with applying 3mm thick wall care putty complete all as specified and directed. | 334 | Sqm | |
14 | 14 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of ceiling with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. | 414 | Sqm | |
15 | 15 | M & L preparation of newly plastered surfaces and applying three coat of white wash on walls complete all as specified and directed by Engineer in charge. | 45 | Sqm | |
16 | 16 | M & L preparation of old plastered surfaces of wall including corners etc by brooming down or steel wire brushing and applying one coat of white wash on walls complete all as specified and directed by Engineer in charge. | 45 | Sqm | |
17 | 17 | Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc. complete all as specified and directed by Engineer in charge. | 9 | Cum | |
18 | 18 | M & L for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge. (Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2010) | 9 | Cum | |
19 | 19 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonary regular coursed complete all as specified and directed by Engineer in charge. | 270 | Sqm | |
20 | 20 | Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) and disposing off the rubbish materials complete all as specified and directed. | 1210 | Sqm | |
21 | 21 | M & L glazed ceramic coloured tile 300mmx200mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed. | 432 | Sqm | |
22 | 22 | M & L Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:6 complete all as specified and directed. | 548 | Sqm | |
23 | 23 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. | 3.3 | Ten Sqm | |
24 | 24 | M&L Granite 20 mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. | 33 | Sqm | |
25 | 25 | Demolition of RCC concrete of any description and in any position for portion ordered to be dismantled by Engineer in charge complete all as specified and directed. | 10 | Cum | |
26 | 26 | Demolition of cement concrete in sunken portion of water closets exc 15 cm thickness complete all as specified and directed. | 0.64 | Cum | |
27 | 27 | Taking up or down GI Steel water tubing 25mm bore and connections including fittings from floor/walls/slabs complete all as specified and directed by Engineer-in -charge. | 75 | RM | |
28 | 28 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed. | 95 | RM | |
29 | 29 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed. | 200 | RM | |
30 | 30 | Supply and laying 25mm bore dia galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tee, union, nipple, short pieces etc complete to walls, ceiling or laid in floors complete all as specified and directed. | 75 | RM | |
31 | 31 | S & F Galvanised steel tubing 20 mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed. | 55 | RM | |
32 | 32 | S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed. | 50 | RM | |
33 | 33 | Cutting holes into or through brick/ stone walls built in cement mortar or cement lime mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required of superficial area exceeding 150 Sqcm but n.exc 400 Sqcm complete all as specified and directed. | 4 | Per CM of Depth | |
34 | 34 | M&L for rendering 10mm thick in cement mortar (1:3) on surface of concrete junction of wall/sunken portiion of slab finishing with out using extra cement with W.P.C including preparation of old RCC surface by thoroughly cleaning and grouting with cement slurry mixed with water proofing compound all as specified and as directed by the Engr-in-Charge (water proofing compound will be measured separately) | 4 | Sqm | |
35 | 35 | S & F Mild steel flat iron as in hold fast 25x6 mm confirming to Fe 290 Gde E-165 complete all as specified and directed. | 24 | Kg | |
36 | 36 | Cutting holes in brick/stone/concrete walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n.exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. | 144 | Each | |
37 | 37 | M & L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and directed. | 0.48 | 100 Nos | |
38 | 38 | M & L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed. | 1.32 | 100 Nos | |
39 | 39 | Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and WC (SP) Complete in lean concrete fixed in repairs complete all as specified and directed. | 12 | Each | |
40 | 40 | Taking down cast iron pipe 75/80mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. | 42 | RM | |
41 | 41 | Taking down cast iron pipe 110mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. | 60 | RM | |
42 | 42 | Supply and fix PVC (SWR) pipes single socketed in any length fixed to wall or laid under floor of 110 mm dia jointed with solvent cement complete all as specified and directed. | 60 | RM | |
43 | 43 | Supply and fix PVC (SWR) pipes single socketed in any length fixed to wall or laid under floor of 75 mm dia jointed with solvent cement complete all as specified and directed. | 42 | RM | |
44 | 44 | Supply and fix PVC (SWR) branch piece Single (Single Y) equal or unequal 100/110mm bore with access door complete all as specified and directed. | 6 | Each | |
45 | 45 | S&F 75mm PVC (SWR) branch piece, (double Y) equal or unequal provided with access door complete all as specified and directed. | 6 | Each | |
46 | 46 | Supply & Fix 110mm PVC (SWR) WC connector with lipring complete all as specified and directed. | 12 | Each | |
47 | 47 | Supply and Fix PVC(SWR) bend with access door any, radius 110 mm bore complete all as specified and directed. | 4 | Each | |
48 | 48 | Supply and Fix PVC(SWR) bend with access door any, radius 75 mm bore complete all as specified and directed. | 4 | Each | |
49 | 49 | Supply & Fix in repair brass cast copper alloy CP Shower rose 125mm size with shower Arm 15mm size 195 mm long with bend complete all as specified and directed. | 12 | Each | |
50 | 50 | Supply and fix in repair PVC SWR floor trap plain with grating including jointing with solvent cement, dia of outer 75mm complete all as specified and directed. | 28 | Each | |
51 | 51 | Supply and Fix PVC (SWR) vent cowl 110mm bore complete all as specified and directed. | 6 | Each | |
52 | 52 | Supply and Fix PVC (SWR) vent cowl 75mm bore complete all as specified and directed. | 6 | Each | |
53 | 53 | Material and Labour PVC(SWR) Gully trap 125/110mm setting and jointing with solvent cement including taking out old & making good complete all as specified and directed. | 10 | Each | |
54 | 54 | M & L for one coat of white wash on ceiling including preparation of old decorated surface complete all as specified and directed. | 12 | Sqm | |
55 | 55 | Material and Labour cement concrete Type F2, 1:7:12 (using 40mm graded aggregate) in foundation filling and mass concrete, in sunken portions of WC and for filling cuttings holes created after removing hold fast of old windows, ventilators and doors etc in any position complete all as specified and directed. | 2.3 | Cum | |
56 | 56 | Supply and Fix bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and directed. | 56 | Each | |
57 | 57 | Supply and fix in repair 600 x 450mm size mirror of selected quality glass 5mm thick with PVC frame including key hole plates for hanging and fixed to wall with chromium plated screws complete all as specified and directed. | 12 | Each | |
58 | 58 | Supply and fix stop valves, cast copper alloy 15 mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed. | 24 | Each | |
59 | 59 | Supply and fixed in repair stop valves, cast copper alloy of size 20mm bore, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | 12 | Each | |
60 | 60 | Supply and fixed in repair stop valves, cast copper alloy of size 25mm bore, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | 6 | Each | |
61 | 61 | All as per item No60 above but stop cock CP with long shank and cup concealed type complete all as specified and directed. | 12 | Each | |
62 | 62 | Supply and fix in repairs PVC flushing cistern 10 ltr capacity high level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC for low level PVC flushing tank complete all as specified and directed. | 12 | Each | |
63 | 63 | Supply & Fix in repairs towel rails 60 cm long brass chromium plated 20mm dia with brackets fixed to walls in repairs complete all as specified and directed. | 12 | Each | |
64 | 64 | Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed embedded in the wall in repairs complete all as specified and directed. | 12 | Each | |
65 | 65 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts, 600mm long complete all as specified and directed. | 24 | Each | |
66 | 66 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc, 1.5 Sqm each complete all as specified and directed. | 70 | Each | |
67 | 67 | All as per Sl Item No. 66 here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed. | 70 | Each | |
68 | 68 | Taking down shutters of any description exc 1.00 and n exc 2.00 Sqm each complete all as specified and directed. | 12 | Each | |
69 | 69 | Refixing in same opening shutters of any description exc 1.00 and n exc 2.00 Sqm each complete all as specified and directed. | 10 | Each | |
70 | 70 | Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Pt II 2004 complete all as specified and directed. | 112 | RM | |
71 | 71 | Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II 2004 complete all as specified and directed. | 29 | Sqm | |
72 | 72 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 1.18 | Cum | |
73 | 73 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed. | 46 | Sqm | |
74 | 74 | S & F 25mm thick Flush shutters (wall cup board shutters), solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed. | 6 | Sqm | |
75 | 75 | S & F Second class hard wood glazed and skeleton window/ door shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (a) including windows, ventilators etc are provided with styles and rails complete all as specified and directed. | 6 | Sqm | |
76 | 76 | Supply and Fix Aluminium Anodised barrel tower bolts 150mm long extruded section complete all as specified and directed. | 148 | Each | |
77 | 77 | S & F 100mm long stainless steel butt hinges complete all as specified and directed. | 234 | Each | |
78 | 78 | S & F 75mm long stainless steel butt hinges complete all as specified and directed. | 24 | Each | |
79 | 79 | Supply & Fix Aluminium. Anodised barrel tower bolts of extruded section 100mm long dia complete all as specified and directed. | 8 | Each | |
80 | 80 | Suppy & Fix Aluminium. Anodised handle 150mm long extruded fabricated type complete all as specified and directed. | 148 | Each | |
81 | 81 | Suppy & Fix Aluminium Anodised handle 100mm long extruded fabricated type complete all as specified and directed. | 8 | Each | |
82 | 82 | Supply and fix in repair of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed. | 19 | Each | |
83 | 83 | Supply & fix Aluminium wire mesh 0.45 mm nominal dia of wire and width of aperature 1.40mm & fixed with aluminium wire staple complete all as specified and directed. | 67 | Sqm | |
84 | 84 | Supply & fix sheet glass ordinary quality 4mm thick and glazed with oil putty or fixed with beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed. | 100 | Sqm | |
85 | 85 | Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed. | 12.4 | Sqm | |
86 | 86 | Preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 190 | Sqm | |
87 | 87 | Preparation of old wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | 51 | Sqm | |
88 | 88 | Supply and fix mild steel frame work confirming to Fe 290 Gde-E-165, such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work complete all as specified and directed by Engineer In charge. | 500 | Kg | |
89 | 89 | Preparation of newly steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 278 | Sqm | |
90 | 90 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 2 | Sqm | |
91 | 91 | Dismantling of boarding any description fixed in any position with nails/ screws including cover fillets complete all as specified and directed. | 26 | Sqm | |
92 | 92 | Plugging to walls complete on cement concrete/stone walls for fixing wood fillets/boarding in repair CB, shelves, not exceeding 1 mtr complete all as specified and directed. | 12 | Each | |
93 | 93 | Material and Labour for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work fixed in repairs complete all as specified and directed. | 26 | Sqm | |
94 | 94 | Extra over rates of block board or veneered particle board for 12mm external teak woodd lipping, 6mm thick fixed with nails | 50 | RM | |
95 | 95 | M & L for RCC 1: 2:4 (nominal mix) type B0 , nominal mix with 12.5mm graded stone aggregates as in slabs, landings,lintels staging for water tank, slab supported on walls, beams and columns in floors, roofs landing, balconies, deek slabs and in shelves and the like including necessary formwork complete all as specified and directed. | 4 | Cum | |
96 | 96 | M&L for precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4 complete all as specified and directed. | 0.5 | Cum | |
97 | 97 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished, flat surfaces of concrete. | 4 | Sqm | |
98 | 98 | M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces. | 4 | RM | |
99 | 99 | M & L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending, spirally for hooping for columns, henking end and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 75 | Kg | |
100 | 100 | All as per item No. 99 herein before but 6 to 8 mm dia bars as in distribution bars complete all as specified and directed. | 120 | Kg | |
101 | 101 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500Ltrs) capacity complete all as specified and directed.(make - Sintex) | 20 | Each | |
102 | 102 | Supply and fixing 25mm float ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 25mm complete all as specified and directed. | 10 | Each | |
103 | 103 | Supply and fix sink made of stainless steel 1mm thick kitchen with plugs, washers and waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe with PVC waste pipe, overall size 495mm x 420mm bowl use 410mm x 330 mm x 160mm fixed in repair complete all as specified and directed. | 12 | Each | |
104 | 104 | M&L rendering 10mm thick on concrete surface in cement mortar 1:4 with using water proofing compund & finishing the surface even & smoth using extra cement. ( Note- Water proofing compund shall be measured seperatly ) | 612 | Sqm | |
105 | 105 | Material and Labour preparation of roof surface by throughly wire brushed, washed, dried up, cleaned of all the foreign matter and dust, and applying bitumenous primer @ 250 gms/sqm, and then laying 3mm thick APP modified bituminous membrane with non woven polyester matt as reinforcement weighting not less than 3.5Kg per sqm, laid on primed surface with torch application method by providing overlap minimum 100mm on logitudinal and 150mm on transerve direction,and finishing the surface with solar reflective bituminous aluminium paint at the rate of 100 grams per sqm with preparation of treated surfaces, all angles and similar projections should be sealed well with extra care to ensure full bondage, all joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR Latex @ 200ml/bag of cement. Note- Removed the debries obtained deposited/fill in the low laying area of camp within 50m distance will not be paid seperatly. | 612 | Sqm | |
106 | 106 | S&F curtain rails 19mm dia anodised aluminium alloy with brackets stops rollers etc fixed in repairs complete all as specified and directed. | 162 | RM | |
107 | 107 | S&F Curtain rails brackets etc fixed in repairs complete all as specified and directed. | 120 | Pair | |
108 | 108 | S&F vitreous china wash basin, white flat back size 550 x 400mm including all necessary fitting like brackets,cutting for and pinning in ends of brackets,etc complete; fixed in repairs complete all as specified and directed. | 12 | Each | |
109 | 109 | S&F Pillar tap cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe 15mm bore, complete all as specified and directed. | 12 | Each | |
110 | 110 | S&F Waste coupling brass CP 32mm for glazed ware basins etc. with long shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. | 12 | Each | |
111 | 111 | S&F aluminum anodized window with openable/sliding or fixed shutter as specified fixed on aluminium frame work fabricated by using the JINDAL / CENTURY section or equivalent of sectional members all as shown on drawings including necessary arrangement for sliding and locking & to receive 4mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting like mortice lock, aluminium tower bolt, handle, stopper, hinges etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter complete all as specified and directed by Engineer in charge. Note :- (i)Sheet glass & wire mesh shall be measured & paid separately. | 1300 | Kg | |
112 | 112 | S&F floor door stopper 150 mm long aluminium alloy body anodized with hard drawn steel spring complete all as specified and directed. | 48 | Each | |
113 | 113 | Dismantling of asbestos cement sheets any corrugation including ridge as in roof covering complete all as specified and directed. | 265 | Sqm | |
114 | 114 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer in charge. | 250 | Sqm | |
115 | 115 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including valleys and gutters complete all as specified and directed by Engineer in charge. | 15 | Sqm | |
116 | 116 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engineer in charge. | 2 | Qtl | |
117 | 117 | M&L for rolled mild steel section as in main and cross beams, hip and jack rafter, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe-290 (Gde E-165) complete all as specified and directed by Engineer in charge. | 2000 | Kg | |
118 | 118 | Dismantling of ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets all as complete all as specified and directed by Engineer in charge. | 120 | Sqm | |
119 | 119 | S&F Anodised aluminium snap grid (605mm x 605mm) frame work with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including necessary bolts, nuts and washers for false ceiling complete all as specified and directed by Engineer in charge. | 120 | Sqm | |
120 | 120 | M&L for 6mm thick non asbestos fibre cement building building boards fixed or laid/ inserted to Aluminium framework with screws complete all as specified and directed by Engineer in charge. (Note:- Aluminium frame work considered in item No 28 above) | 120 | Sqm | |
121 | 121 | S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to iron frame work including making holes to frame to frame work for holding GI wire etc or by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long complete all as specified and directed by Engineer in charge. | 120 | Sqm | |
122 | 122 | Cuting holes into or through walls built in making good in cement mortar 1:3 superifical area exc 150 Sqcm but not exc 400 Sqcm complete all as specified and directed by Engineer in charge. | 6 | Per CMD | |
123 | 123 | M&L for PCC 25mm thick type B-0, using 20mm graded stone aggregate and finishing the surface rough and even to receive top layer as under tiles/ interlocking tiles/ stone etc all as specified and directed. | 90 | Sqm | |
124 | 124 | M&L Chequred cement colured tiles 20x20x25mm thick set & jointed & pointed in neat cement slurry in floors with grey cement and pigments, over 20mm thick screed bed in CM 1:6 complete all as specified and directed. | 90 | Sqm | |
125 | 125 | M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate ) as in sub base under floor etc complete all as specified and directed. | 0.5 | Cum | |
126 | 126 | S&F 35mm thick Iind class hard wood plain wood plain framed factory made paneled shutters with panel of 9mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) kiln seasoned and chemically treated complete all as specified and directed. | 20 | Sqm | |
127 | 127 | S&F 35mm thick Iind class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I complete all as specified and directed. | 24 | Sqm | |
128 | 128 | S&F aluminium grill DG-104 of Deco Grill/Hindal 10mm thick diamond shape with aperture 7.5cm for windows complete all as specified and directed. | 70 | Sqm | |
129 | 129 | S&F 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate fixed to wooden/stone/concrete chowkhats with flat iron 40x3mm size 75cm long with necessary bolts etc. complete all as specified and directed. | 12 | Each | |
130 | 130 | S&F 20mm gun metal, globe or gate valves with iron wheel head, screwed both ends for pipe sand fixed complete all as specified. | 12 | Each | |
131 | 131 | Supply and fixing 20mm float ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 25mm complete all as specified and directed. | 2 | Each | |
132 | 132 | S&F bottle trap of PTMT having minimum water seal of 25mm (min wt 32mm-260gms/40mm-270gms) bore dia 40mm complete all as specified. | 8 | Each | |
133 | 133 | Taking out completely existing water proofing treatment any type from top surface of roof slab and remove the material obtained to low laying area complete all as specified and directed. | 612 | Sqm | |
134 | 134 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate as in flooring 40mm thick complete all as specified and directed. | 70 | Sqm | |
135 | 135 | M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc. | 140 | Sqm | |
136 | 136 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer In charge. | 50 | Sqm | |
137 | 137 | M&L for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick on vertical wall aurface over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 10mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer In charge. | 10 | Sqm | |
138 | 138 | S&F of 20mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed. complete all as specified and directed. | 150 | RM | |
139 | 139 | S&F of 25mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed. complete all as specified and directed. | 40 | RM | |
140 | 140 | S & F CPVC 20mm Brass Elbow | 10 | Each | |
141 | 141 | S & F CPVC 20mm Brass Elbow (3/4 x 1/2) | 40 | Each | |
142 | 142 | S & F CPVC 20mm Brass Tee | 8 | Each | |
143 | 143 | S & F CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) | 16 | Each | |
144 | 144 | S & F CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) | 16 | Each | |
145 | 145 | S & F CPVC 25mm Tank Adaptor | 8 | Each | |
146 | 146 | S & F CPVC 25mm Ball valve | 8 | Each | |
147 | 147 | S & F CPVC 20mm Ball valve | 8 | Each | |
148 | 148 | S&F kitchen plate rack made of steel including fixing with cantilever brackets complete all as specified and directed. | 12 | Each | |
149 | 149 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. | 5 | Cum | |
150 | 150 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard dense soil. | 5 | Cum | |
151 | 151 | S & F PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings laid in trenches or in floors | 40 | RM | |
152 | 152 | S & F PVC (SWR) pipes 160 mm bore single socketed in any lengths with rubber rings laid in trenches or in floors | 40 | RM | |
153 | 153 | M & L PCC (1:4:8) type D2 using 40 mm graded agg as in concrete bed to drain pipes incl packing under, & haunching against the sides of pipes after they are laid & tested, bore of pipe 110mm. | 40 | RM | |
154 | 154 | M & L PCC (1:4:8) type D2 using 40 mm graded agg as in concrete bed to drain pipes incl packing under, & haunching against the sides of pipes after they are laid & tested, bore of pipe 160mm. | 40 | RM | |
155 | 155 | Remove cover and loose unsound cracked concrete clear from main reinforcement using wooden mallet wire brush water jet to completely expose the reinforcrment in the distressed portion of RCC members with out distrubing integrity of structural members at a height exc 7.5m n exc 15m. Including removal of unserviceable materials to a distance exc 50m & not exc 100m complete as directed by EIC | 200 | Sqm | |
156 | 156 | Remove the rust from the reinforcement completely by applying rust removing chemical such as deruster manufactured by M/S OM Agro or any other equivalent as approved by GE at a height exc 7.5m n exc 15m. | 150 | 10 RM | |
157 | 157 | M & L for priming reinforcement bars with a coat of NitoZinc primer of M/S Fosroc or any other equivalent as approved by GE(at least 40microns for old and new reinforcement at a height exc 7.5m n exc 15m.) | 50 | 10 RM | |
158 | 158 | Cleaning the prepared surface finally with air blower to remove dust etc and appyling epoxy based holding material between old and new concrete surface with Nito bond EP of M/S Fosroc or other equivalent make as approved by GE. | 200 | Sqm | |
159 | 159 | M & L for applying shot crete 20mm thick in the proportion of 1:3:1 (cement : coarse sand: 10mm aggregate 50% and 6mm aggregate 50%) while the bond coat is tacky and all as per the manufcturers instructions including provision of hard drawn steel wire fabric 50mm mesh size dia of wire 3mm welding lying on concrete susrfaces after and including applying burning coat at a height exc 7.5m n exc 15m the gunneting pressure at the nosel delivery shall be 2.5kg per Sq cm | 200 | Sqm | |
160 | 160 | S & F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemntweight n exc 4 Kg per Sqm | 100 | Kg | |
161 | 161 | M & L deformed bars 5 mm dia and over upto and including 10 mm dia cut to length shape and welded to the existing reinforcement as additional bars to location where original cross sectional area of existing bar has reduced by 20% by lap welding with an overlap as per relevant IS code of height exc 7.5m n exc 15m. | 200 | Kg | |
162 | 162 | S&F 75mm Hasp and staple, safety type, aluminium including bolt to hinge plate and fixed with screws | 24 | Each | |
163 | 163 | S&F 2 lever brass Mortice lock, vertical type, size 100 mm and two keys | 12 | Each | |
164 | 164 | Scdhedule'A' Part-II\nTaking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. | 496 | Point | |
165 | 165 | Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces all as directed of any sizes. | 450 | RM | |
166 | 166 | Taking down MCB DBs with MCBs of any size and capacty alongwith teadwood boards incl all fittings/furniture carefully and making good disturbe dsurfaces of wall | 15 | Each | |
167 | 167 | M & L for point wiring with proper colour coding complete with and including PVC insulated, unsheathed,flexible, bright annealed multi stranded copper conductor single core FRLS cables 1.5sqmm 1100 volts grade drawn through and including heavy grade rigid PVC conduit 20mm or higher dia as required at site ,totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade ,ISI marked and sunk terminal boxes of factory made 16SWG pressed steel housing ,totally concealed in walls with 3mm thick industrial laminated sheet top cover ,fixed flush with wall surface by means of brass screws and sunk/cupwashers,for mounting of switches ,sockets,fan regulator etc ;including 1.5sqmm 1100 volts grade PVC insulated FRLS ,unsheathed flexible ,multi stranded copper conductor cable as continious earth wire connected to metallic bodies of luminiaries/fan etc at one end to common earth dolly at other end,all as specified and directed for one light point controlled by one way switch, SP, 5 Amps. | 262 | Point | |
168 | 168 | All as per item No 167 above but for one fan point controlled by one switch SP, 5 Amps | 48 | Point | |
169 | 169 | All as per item No167 above but Exhaust Fan, controlled by one switch SP, 5 Amps | 20 | Point | |
170 | 170 | All as per item No167 above but for one bell point, controlled by one switch SP, 5 Amps | 12 | Point | |
171 | 171 | All as per item No 167 above but for one 5Amp independent socket point controlled by one switch. | 44 | Point | |
172 | 172 | All as per item No 167 above but for one 5A socket point controlled by one switch on same board | 56 | Point | |
173 | 173 | All as per item No 167 above but for one light point controlled by two way switch SP, 5 Amps | 6 | Point | |
174 | 174 | All as per item No 167 here-in-before but for power point wiring with 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead. | 48 | Each | |
175 | 175 | S&F switch piano, flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified | 430 | Each | |
176 | 176 | S&F Bell push flush type white finish complete all as specified | 12 | Each | |
177 | 177 | S&F switch piano, flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified | 12 | Each | |
178 | 178 | S&F socket outlet 2/3 pin, 5 Amps shuttered type white finish complete all as specified | 100 | Each | |
179 | 179 | S&F socket outlet 3 pin, 5/15 Amps multipurpose, controlled by one switch 15 Amps (SSC) with fuse and neon indicator, flush type ISI mrked complete all as specified and directed. | 48 | Each | |
180 | 180 | S&F electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified | 48 | Each | |
181 | 181 | S&F ceiling rose, surface backlite, 65 x 20 mm three terminal | 348 | Each | |
182 | 182 | S&F Call Bell ding dong type Ac 230 volts single pole complete. | 12 | Each | |
183 | 183 | S&F lamp holder insulated body with back plate suitable for angle / batten fitting | 104 | Each | |
184 | 184 | S&F IP-42 protection distribution board SPN 8 ways, 240 V, sheet steel, power coated, double door system, fitted with two covers suitable for use on 240V, 50 Hz, with 200Amps rated bus bar, neutral link each bar and din rail complete fixed all as specified and directed. | 12 | Each | |
185 | 185 | S&F MCB, SPN, 240 V , 16 to 4 Amp complete all as specified and directed. | 8 | Each | |
186 | 186 | S&F MCB, SPN, 240 V , 5 to 30Amp complete all as specified and directed. | 66 | Each | |
187 | 187 | M&L sub main wiring with two single core PVC-FRLS insulated, unsheathed stranded copper conductor cable of size 6 sqmm drawn through and including heavy grade rigid PVC conduit 20mm or higher dia as required at site ,totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade ,ISI marked with 4 Sqmm PVC-FRLS insulated, unsheathed multistranded copper conductor as a continuous earth wire complete all as specified.\nNote : (i) Two single core cable and one run of earth copper conductor/Casing capping will be measured and paid as one unit length\n | 450 | RM | |
188 | 188 | S&F LED Batten and Tube Light light fittings including tube rod 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20mm of sufficient length complete all as specified and directed.Make: Bajaj ,Havells Cat No.-LHEBQP7IN1W018, Philips /HPL/Crompton. | 82 | Each | |
189 | 189 | S&F LED bulb of 7W B22 ww Ball Lamp of Havells cat part no. LHLDERUEMD8X007 New adore or equivalent in Bajaj/Philips/HPL/Crompton. | 104 | Each | |
190 | 190 | S&F Mirror light BEETLE of Havells cat No. LHDL07150099 or equivalent in Bajaj/Philips/HPL/Crompton with LED bulbof 7W complete and connect 3 core 105sqmm copper conductor wire from ceiling rose to fittings and connected accessories all as specified and as directed. | 14 | Each | |
191 | 191 | Supply and fix Energy saving & Environmental friendly long life Varsatile pressure die cast aluminium with IP66 protection road way light fitting with high power LED as light source of capacity 15 watts with suitable driver and all standard accessories etc. complete all as specified and as directed. Make: Havells Cat No-LHETBXU71A6S015 or equivalent Make in Bajaj/Philips/HPL/Crompton. Note:- (i) LED's used should be the make of Cree/asram/Lumilieds/widchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer (iii) Surge protection of the drive should be 10 KV. | 9 | Each | |
192 | 192 | Supply and Fix bracket for street light fittings made out of GI pipe of 32 mm dia light grade not less than 1.5 mtr long, bent to shape, fixed to Pole/Wall in any position with 02 Nos MS Clamps made out of MS flat iron of size 25 mm X 4 mm including Bolts & Nuts complete all as specified and directed. | 9 | Job | |
193 | 193 | Supply and fixing 300mm sweep exhaust fan heavy duty of 900RPM with micro speed regulator, 220/240 volts, AC 50 Htz, air discharge 1275CMH, single phase with louvers mounting MS rag and bolts etc and fixing of provision of PVC insulated and sheathed three core FRLS copper conductor flexible cable of size 16/0.20mm of sufficient length complete all as specified and directed. Make: Crompton Greaves/ Havells/ Khaitan as approved by GE. | 20 | Each | |
194 | 194 | S&F IP-42 protection distribution board TPN 4 ways, 415 V, sheet steel, power coated, double door system, fitted with two covers suitable for use on 415V, 50 Hz, with 200Amps rated bus bar, neutral link each bar and din rail complete fixed all as specified and directed. | 3 | Each | |
195 | 195 | S&F MCB, TPN, 415 V , 40 Amp to 63 Amp complete all as specified and directed. | 3 | Each | |
196 | 196 | Excavation in trenches n.exc 1.5m wide and n. exc 1.5m depth for foundation, Pole Structs,laying of cables/pipes,etc., not exceeding 10Sqm on plan and not exceedding 1.5m in depth and getting out in Hard / dense soil, complete all as specified and as directed by Engineer-in-Charge. | 44 | Cum | |
197 | 197 | Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified. | 28 | CUM | |
198 | 198 | Removal of surplus soil to a distance n. exc 50 m and depositing where directed at a level not exceeding 1.5mtr above the strarting point as in soils complete all as specified and as directed. | 16 | CUM | |
199 | 199 | M&L for manufacturer sand coushioning of LT UG cable in trenches with approved river sand complete all as specified and directed Note: Sand to be filled 23cm and carefully punned to 18cm thickness. (Punned thickness shall be measured for payment) | 13 | CUM | |
200 | 200 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 flat, size250mm x 150mm x 40mm complete all as specified and as directed | 1080 | Each | |
201 | 201 | Supplying and laying , Jointing, testing and commisioning 1100 volts grade, XLPE insulated , PVC sheathed, armoured heavy duty electric cable with ultistranded sluminium conductor 35 sqmmX 3.5 core laid in trenches / passing through pipes & ducts / road crossings / on poles & walls including jointing material such as lugs, cable glands etc complete all as specified and as directed. \n\n\n NOTE : For Item NO-1 to 201:- If the tenderer quoted the rates for same items is different, the lowest rates shall be cosidered for payment purpose. | 180 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail