Goa Shipyard Limited has published Supply Of Marine Grade Engineering Items For Frp Boat Yard 2158. Submission Date for this Tender is 10-06-2020. Commercial Marine Vehicle Tenders in Goa Shipyard limited Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Mar-2020 | Date Corrigendum | Date | 21-04-2020 |
| 2 | 21-Apr-2020 | Date Extension | Date | 11-05-2020 |
| 3 | 11-May-2020 | Date Corrigendumm | Date | 26-05-2020 |
| 4 | 27-May-2020 | Date Corrigendem | Date | 10-06-2020 |
| Name of Work: Supply of IACS approved marine grade engineering items / systems required for the 15m FIB’s boats. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | UOM | |
| 1 | 1 | SS 316 D shackle 6 mm for wire rope with embedded pin {Ref Plastimo Ref no-100712 } | Item 1 | 10 | Nos |
| 2 | 2 | SS 316 Duplex wire rope clamp 6 mm ( Dog clamps) Clamps should be suitable for bare or plastic coated cable.{ Ref Osculati part no-04.512.03} | Item 2 | 12 | Nos |
| 3 | 3 | SS 316 Wire rope 6mm dia (50 mtr) { Plastimo Ref no-400654} | Item 3 | 50 | mtr |
| 4 | 4 | SS chain 8 mm for railing (15 mtr) Mirror polished ASI 316 SS { Plastimo ref no-57190} | Item 4 | 15 | mtr |
| 5 | 5 | D shackle 8 mm with embedded pin AISI 316 Stainless steel to Connect chain and railing { Plastimo Ref no-100713} | Item 5 | 10 | Nos |
| 6 | 6 | SS 316 U Bolt 12mm for towing of boat { Osculati part no-39.127.05} | Item 6 | 3 | Nos |
| 7 | 7 | Reverse hinges for hatch(wheelhouse floor) Made of mirror finished AISI SS 316 { Osculati part no 38.491.00} | Item 7 | 6 | Nos |
| 8 | 8 | Hatch cover latch for storage spaces (wheelhouse floor) { Plastimo Ref no-400937} | Item 8 | 4 | Nos |
| 9 | 9 | Rise floor pull for hatch cover (WH Cabin floor, Anchor compartment & Steering gear compartment) {Osculati part no. 38.141.21} | Item 9 | 6 | Nos |
| 10 | 10 | SS rise floor pull (dia 70 rnm) Mirror polished AISI 316 SS, fitted with counter stop plate, no visible screws, special pulling system which turns the handle to completely lock the bottom boards, thus avoiding vibrations, supplied with angled locking lever + straight l ever + stop plate. (Dia A=70rnm B=60rnm, C=30 I 80, D= 78rnm) | Item 10 | 4 | Nos |
| 11 | 11 | Reverse hinges for hatch covers (SS 316 Mirror polished A = 68, B= 39, C= 5, Thickness 2 rnm ) | Item 11 | 2 | Nos |
| 12 | 12 | Hatch Dog flush type for lifting of engine room hatches (Reference PERKO 0777F model) | Item 12 | 4 | Nos |
| 13 | 13 | Heavy duty SS Gas spring for Engine room hatch cover (with fixed plates and bases ) - 700 rnm length fitted with eye terminals with hole size 8 rnm suitable to lift an hatch weighting 20-25 Kg. The minimum angle of opening hatch should be 90 Degrees. | Item 13 | 4 | Nos |
| 14 | 14 | Mirror polished telescopic dining table stand (minimum height 540 mm adjustable to 720 mm) (Reference Osculati part no 48.418.00) | Item 14 | 1 | No |
| 15 | 15 | SS 316 Snap Hook 8 rnrn with Captive Eye and Break load of minimum 200 kgs | Item 15 | 4 | Nos |
| 16 | 16 | SS 316 Eye bolt with Washer and Nut 10rnrn (Bolt Length should be more than 60rnrn and total length minimum 120rnrn) | Item 16 | 8 | Nos |
| 17 | 17 | Vertical Anchor windlass suitable for 30-35 Kg of Anchor (vertical) with manual emergency hoisting for using rope and chain & chain stopper is required. Winch motor 24vdc with up & down push button can be controlled from Wheelhouse. The controls shall be provided. The motor should be of 700W capacity & should take 8mm chain & 14mm rope. The windlass with suitable chain stopper suitable to block the down drift of the chain to be provided. Once the anchor is raised, it locks the chain & the windlass can be used for a second chain or to traction. The chain stopper should be disengaged with a simple movement. Should be made of mirror polished SS 316 & suitable for 8mm chain. The rope of 14mm & chain of 8 mm shall be used for 35 Kg anchor. (Reference Quick Spa Prince DP2 series) | Item 17 | 1 | Set |
| 18 | 18 | SS CHAIN AND ROPE for Anchor:- Chain shall be SS 316 suitable for 30-35 Kg anchor and dia of the chain shall be 8 mm and rope 14 mm (mandatorily suitable and compatible with Anchor winch). The rope shall be 3 strands Polyester braided. The length of the chain shall be 10 m spliced with rope of 50 m each (Total chain 20 m & rope 100 m) | Item 18 | 1 | Set |
| 19 | 19 | Anchor (Danforth Type) Made of Stainless steel SS 316 mirror polished or special alloy suitable for marine application. The flukes required can be adjustable from the normal 32 degree to 45 degree. The anchor shall be supplied with suitable D shackle and swivel. | Item 19 | 2 | Nos |
| 20 | 20 | 14-16 mm dia Mooring Rope-Nylon rope /double braided polyester /polyamide rope meeting requirement of classification society for mooring application for 16m boat (15 Ton displacement). Should permit high elasticity in absorbing shocks, traction resistance, high UV protection, high abrasion resistance etc. | Item 20 | 100 | mtr |
| 21 | 21 | Aluminum weathertight door of 1550 X 550 mm clear opening. The door should be made up of Aluminum 5083-H111. The door should be light weight and single skin. The door should have central locking system and suitable marine grade beading. In addition to this, padlock locking arrangement also should be available on external side of door. The door to be supplied with suitable SS 316L grade screws /fasteners for fitment of frame of door on FRP panel. The drawing of the door to be submitted along with other technical details along with the offer. Weight of the door should not exceed more than 40 Kg. The door & its frame should be Powder coated for weather protection in Telegrey RAL 7040 shade. | Item 21 | 1 | No |
| 22 | 22 | Elliptical shape watertight port hole /port light with mosquito screen & counter flange, tinted acrylic sheet. The frame should be anodized Aluminium. The dimensions of the same will be Overall LXW (around209 x 468). Should be EC type approved. (Refer Osculati 2015 part no 19.511.22. | Item 22 | 4 | Nos |
| 23 | 23 | Standard Marine Toilet with manual hand flush pump. Top quality vitreous china bowl, solid plastic seat & cover, flush & dry bowl pump cycles to control bowl water level, discharge outlet swivels 360 degrees, pump & bowl positions can be altered to suit the installation requirements. | Item 23 | 1 | No |
| 24 | 24 | S/S 1 1/2"Deck fitting for suction from waste tank. The plug should mention “WASTE” on top for identification. (Refer Osculati Part No 20.866.35 | Item 24 | 1 | No |
| 25 | 25 | shower/Cock pit drainer 1 1/2" | Item 25 | 1 | No |
| 26 | 26 | Plastic Fresh Water Tank with fittings like sender, vent, connectors & filler plug & gauge (black dial) and mounting brackets with securing belts- 200 Ltr. The plastic material should be of food grade plastic suitable for drinking water as per ISO 8099 standards. The height of the tank should not be more than 600 mm. The tank should be supplied with suitable arrangement for fitment of tank on FRP hull. | Item 26 | 1 | No |
| 27 | 27 | Hydrophore Pump with a Stainless steel reservoir tank of minimum 8 liter capacity. Discharge capacity should be 12-18 liter/min at an head of 10 m. The system should be compatible for 24V DC system. The Hydrophore pump will be connected to Fresh water tank for pressurized supply at all time. | Item 27 | 1 | No |
| 28 | 28 | Level sensor with gauge for Black water. The sensor should be suitable for fitment on Plastic sewage tank of 48 Ltr capacity. The height of the sender should be 20 cm. The system should be supplied with suitable alarm & indicating arrangement for low, medium & high levels | Item 28 | 1 | No |
| 29 | 29 | S/S 316 Deck Water Filler ( Flush mounted ) - 38 mm (Refer Osculati Part No 20.866.23) | Item 29 | 1 | No |
| 30 | 30 | SS 316 Deck filler for Diesel (Flush Mounted) -38 mm dia (Refer Osculati Part no 20.866.30) | Item 30 | 2 | Nos |
| 31 | 31 | Fuel level Indicator (sender) with gauge for display. The length of the sensor should be 700 mm. (Refer Osculati Part No 27.320.01 for gauge & 27.160.70 for level sender. However the gauge and sender must be compatible for each other. | Item 31 | 2 | Nos |
| 32 | 32 | DC 24V Self Priming pressure pump. Bronze rotor: can run dry without getting ruined, self-priming up to 5/6 meters in depth. 120 L/min | Item 32 | 1 | No |
| 33 | 33 | Shower drain pump DC 24V It should automatically switch on after the water starts, and shuts off when the water is removed. The system should activate by a float switch. With multiple inlet ports. The pump also should have a clear screw down cover, a removable strainer for easy cleaning and an internal check to prevent back flow. 50 L/min | Item 33 | 1 | No |
| 34 | 34 | Hand bilge pump Suitable for mounting on bulkhead, through bulkhead, on deck or through deck. Push-fit inlet and outlet elbows swivel through 360° to increase flexibility of installation. Made of Corrosion resistant materials. A quick release gives fast access for blockage clearance. Very suitable for emptying bilge or waste water tanks. Should be complete with bronze handle and mounting clips. 100 L/min | Item 34 | 1 | No |
| 35 | 35 | RULE (4000) make Bilge pump DC 24V with 20 Amp float switch (Osculati 16.609.00) and Auto/manual bilge pump switch panel with indicator panel inbuilt with audible alarm (16.605.00). It should be watertight motor with self-lubricating shaft automatic protection against overload long lasting and also suitable for heavy duty usage. In presence of water it should activate itself through float switch and remove the water completely. 256 L/min | Item 35 | 5 | Nos |
| 36 | 36 | Macerator pump DC 24V , Hose dia 1 ½” INLET & 1” OUTLET).The self-priming macerator pump should have a triple sealed motor to prevent both internal and external corrosion. A four-blade cutter reduces the chance of clogging. The pump detects the absence of fluid and then shuts-off before impeller is damaged. A sensor should provide adequate run-dry period to allow initial priming of the pump. 45 L/min | Item 36 | 1 | No |
| 37 | 37 | Engine driven fire pump coil power supply 24V DC This flexible impeller pump can be used as deck wash pump, bilge pump, engine cooling water pump and for many other purposes. Can be switched on and off by means of built-in electrical clutch. This pump must be self-priming type. Stainless steel shaft runs in self-lubricating bronze bearings. The housing is made of bronze. The capacity as given varies from min. 50 to 2000 rpm at a suction lift capacity of 4.5 m. Maximum rpm : 2300. The Pump should be compatible with Marine propulsion engines of reputed make. | Item 37 | 1 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
