}

Provision Of Certain B/R Work Of Major Revenue Works And Special Repair To Building At Afs Mohanbari Under Ge ( Af) Mohanbari, AFS Mohanbari-Assam

Military Engineer Services-MES has published Provision Of Certain B/R Work Of Major Revenue Works And Special Repair To Building At Afs Mohanbari Under Ge ( Af) Mohanbari. Submission Date for this Tender is 10-03-2020. Building Repair Tenders in AFS Mohanbari Assam. Bidders can get complete Tender details and download the document.




Tender Notice

23755498
Provision Of Certain B/R Work Of Major Revenue Works And Special Repair To Building At Afs Mohanbari Under Ge ( Af) Mohanbari
Open Tender
Indian
Assam
AFS Mohanbari
10-03-2020

Tender Details

PROVISION OF CERTAIN B/R WORK OF MAJOR REVENUE WORKS AND SPECIAL REPAIR TO BUILDING AT AFS MOHANBARI UNDER GE ( AF) MOHANBARI

Key Value

Document Fees
INR 500 /-
EMD
INR 38000.0 /-
Tender Value
INR 18.80 Lakhs /-

BOQ Items

Name of Work: PROVISION OF CERTAIN B/R WORK OF MAJOR REVENUE WORKS AND SPECIAL REPAIR TO BUILDING AT AFS MOHANBARI UNDER GE ( AF) MOHANBARI.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance complete all as specified and as directed by Engineer-in-charge. 40 Per\nSqm
2 2 Supply and fixing gypsum board, 12 mm thick in ceiling, fixed to aluminium frame work with screw as in ceiling in flat or sloping and applying two coats of acrylic based distemper emulsion over a coat of primer complete all as specified and as directed by Engineer-in-charge. 110 Per\nSqm
3 3 Supplying and fixing Aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm including hangers of GI wire 4mm dia, tied to main and cross tee to supporting members @ 1200 mm c/c. complete all as specified and as directed by Engineer-in-charge. 40 Per\nSqm
4 4 Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and as directed by Engineer-in-charge.\n 51 Each
5 5 Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and as directed by Engineer-in-charge.\n 25 Each
6 6 Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification complete all as specified and as directed by Engineer-in-charge. 15 Per\nRM
7 7 Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-charge. 4.1 Per\nSqm
8 8 Supply and Fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Prelam Sheet on the front face & 2mm Prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification. complete all as specified and as directed by Engineer-in-charge. 7 Per\nSqm
9 9 Supply and fixing in repair Prelaminated particle board 18/19 mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber framework as in cupboards, shelves etc including necessary leaping/beading required over the edges. complete all as specified and as directed by Engineer-in-charge. 9 Per\n Sqm
10 10 Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and as directed by Engineer-in-charge.\n 9 Each
11 11 Supply and fixing Continuous( piano) hinges , mild steel , bright finish or electrogalvanised complete all as specified and as directed by Engineer-in-charge.\n 12 Rm
12 12 Supply and fixing Aluminium handles, cast type anodised, 150 mm long complete all as specified and as directed by Engineer-in-charge. 12 Each
13 13 Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified and as directed by Engineer-in-charge.\n 6 Each
14 14 Supply and fixed in repair harrison rails, mild steel chromium plated with fixing brackets, stops,rollers etc.complete all as specified and as directed by Engineer-in-charge. 10 Per\nRM
15 15 Supply and fixing in repair 6.3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified and as directed by Engineer-in-charge. 2.5 Per\nSqm
16 16 Supply and fixing Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, 100 mm size complete all as specified and as directed by Engineer-in-charge.\n 3 Each
17 17 Supply and fixing magnetic catcher for cupboards complete all as specified and as directed by Engineer-in-charge.\n 12 Each
18 18 M&L for Powder coated aluminium window frame with frame of section 100mm x44mm, thickness of sheet 1.6 gauge, incl slididing shutters with shutter of section 32mmx15mm(with and incl Triple track and 2 Nos Glazed shutter and 01 No Gauzed shutters) incl stainless steel wire mesh, rubber gasket for securing the glass, 5.5 mm thick tinted glass, aluminium grill and necessary Aluminum moongreies and handles incl necessary locking arrangementcomplete all as specified and as directed by Engineer-in-charge. 54 Per\nSqm
19 19 M&L for Powder coated aluminium window frame with frame of section 100mm x44mm, thickness of sheet 1.6 gauge, incl slididing shutters with shutter of section 32mmx15mm(with and incl Triple track and 2 Nos Glazed shutter and 01 No Gauzed shutters) incl stainless steel wire mesh, rubber gasket for securing the glass, 4 mm thick tinted glass, aluminium grill and necessary Aluminum moongreies and handles incl necessary locking arrangement complete all as specified and as directed by Engineer-in-charge. 20.5 Per\nSqm
20 20 M&L for Powder coated aluminium ventilator frame with frame of section 100mm x44mm, thickness of sheet 1.6 gauge, incl slididing shutters with shutter of section 32mmx15mm(with and incl 1 Nos Glazed shutter and 01 No Gauzed shutters) incl stainless steel wire mesh, rubber gasket for securing the glass, 5.5 mm thick figured glass, aluminium grill and necessary Aluminum moongreies and handles incl necessary locking arrangement complete all as specified and as directed by Engineer-in-charge. 3 Per\nSqm
21 21 Materials and labour for powder coated aluminium door frame with shutter of section 100mmx 45mm, thickness of sheet 16 gauge ,Partially glazed and panelled lock rail/ bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium including necessary fittings and aluminium mongeries i.e. 150 mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100mm long butt hinges with each leaf including 5.5 mm thick tinted glass PVC Panelling including mortice lock etc complete all as specified and as directed by Engineer-in-charge. 44 Per\nSqm
22 22 Materials and labour for powder coated aluminium door frame with shutter of section 100mmx 45mm, thickness of sheet 16 gauge ,Partially glazed and panelled lock rail/ bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium including necessary fittings and aluminium mongeries i.e. 150 mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100mm long butt hinges with each leaf including 5.5 mm thick tinted glass PVC Panelling including mortice lock, grills in glazed portion etc complete all as specified and as directed by Engineer-in-charge. 2.3 Per\nSqm
23 23 Materials and labour for powder coated aluminium door frame with shutter of section 100mmx 45mm, thickness of sheet 16 gauge ,fully gauzed and made to receive stainless steel wire mesh, and lock rail/ bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium including necessary fittings and aluminium mongeries i.e. 150 mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the wire mesh and 3 Nos 100mm long stainless steel butt hinges with each leaf including stainless steel wire mesh, 1.4mm dia and mesh size 12mm including mortice lock etc complete all as specified and as directed by Engineer-in-charge. 8.8 Per\nSqm
24 24 S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and as directed by Engineer-in-charge.\n 20 Each
25 25 Supply and fixed in repairs Double action floor spring hydraulically regulated made up of mini-mum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer-in-charge.\n 1 Each
26 26 Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified and as directed by Engineer-in-charge.\n 2 Per\nCum
27 27 Material and labour for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-charge.\n 12.5 Per\nSqm
28 28 Material and labour for brick work built in cement mortar 1:6 with well burnt bricks having crushing strength 75 Kg/sqcm straight or curved on plan exc 6 m mean radius etc complete all as specified and as directed by Engineer-in-charge. 0.5 Per\nCum
29 29 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified and as directed by Engineer-in-charge.\n\n 189 Per\n Sqm
30 30 Material and labour for glazed ceramic coloured tiles of size 350x250x7 mm/450x350x7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screeding in CM 1:3 complete all as specified and as directed by Engineer-in-charge.\n( Note: Screed bed shall also deemed to be included in the quoted rate by the contractor ).\n 101 Per\nSqm
31 31 Material and labour for vitrified ceramic (square/rectangular) polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 10mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in CM 1:4. complete all as specified and as directed by Engineer-in-charge. ( Note: Screed bed shall not be measured and paid separately).\n\n 110 Per\nSqm
32 32 Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screeding in CM 1:4complete all as specified and as directed by Engineer-in-charge. ( Note: Screed bed shall not be measured and paid separately).\n\n 30 Per\nSqm
33 33 Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screeding in CM 1:4 complete all as specified and as directed by Engineer-in-charge. ( Note: Screed bed shall not be measured and paid separately).\n\n 100 Per\nSqm
34 34 Material and labour 20 mm thick Granite ( of any type) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 25 mm thick screeding in CM 1:4 complete all as specified and as directed by Engineer-in-charge.( Note Screed bed shall not be measured and paid separately).\n\n 4 Per\nSqm
35 35 Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia complete all as specified and as directed by Engineer-in-charge.\n\n 15 Per\nRM
36 36 Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia complete all as specified and as directed by Engineer-in-charge.\n\n 10 Per\nRM
37 37 Supplying, laying, jointing and testing 15 mm nominal bore dia, steel water tubes, 'medium grade' galvanised, with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.\n\n 15 Per\nRM
38 38 Supplying, laying, jointing and testing 20 mm nominal bore dia, steel water tubes, 'medium grade' galvanised, with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.\n\n 10 Per\nRM
39 39 Supply and fixed in repairs 600mm x 450mm bevelled edge mirror 5.5mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified and as directed by Engineer-in-charge. 3 Each
40 40 Supply and fixed in repairs vitreous china wash basin (WHB), oval type, size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of tapscomplete all as specified and as directed by Engineer-in-charge.\n 3 Each
41 41 Supply and fixed in repair 9-10 Litres capacity Low level flushing cistern with (dual flush, ISI Marked embossed) valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe complete including dismantling of existing flushing cistern including flush pipe complete all as specified and as directed by Engineer-in-charge.\n 3 Each
42 42 Supply and fixed in repairs Vitreous china Urinal, Half stall type, white (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , including connections to flushing pipe and outgoing pipes complete all as specified and as directed by Engineer-in-charge.\n\n 3 Each
43 43 Supply and fixing in repairs Plastic water closet seat, black, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-charge.\n\n 3 Each
44 44 Supply and fixed in repairs CP , brass body, health faucet with complete assessories complete all as specified and as directed by Engineer-in-charge.\n 3 Each
45 45 Supply and fixed in repairs vitreous China white wash down water closet (pedestal pattern) , including connection to drain pipe, flushing pipe etc. complete all as specified and as directed by Engineer-in-charge.\n\n 3 Each
46 46 S&F in repairs vitreous china, white, soap dish of approximate size of 160x160x90 mm. complete all as specified and as directed by Engineer-in-charge.\n 3 Each
47 47 Supply and fixed in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-charge. 3 Each
48 48 Supply and fixing in repairs aluminium anodized Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-charge. 3 Each
49 49 Supply and fixed in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-charge.\n 9 Each
50 50 Supply and fixed in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified and as directed by Engineer-in-charge.\n 9 Each
51 51 Supply and fixing , Pillar taps, cast copper alloy , with capstan heads, chromium plated , fancy type, screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.\n\n 3 Each
52 52 Supply and fixing, Chromium plated Bib taps with cup , cast copper alloy with crutch or butterfly handle, fancy type, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-charge.\n 5 Each
53 53 Supply and fixing in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup (concealed type) cast copper alloy with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge. 6 Each
54 54 Demoiltion and breaking up 100mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-charge. 18 Per\nRm
55 55 Supply and fixed 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge.\n 3 Per\nRM
56 56 Supply and fixed 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.\n 10 Per\nRM
57 57 Supply and fixed 75 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors type complete all as specified and as directed by Engineer-in-charge.\n 5 Per\nRM
58 58 Demolition of Cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for including reinforced cut to facilitate demolition complete including removing demolished material from work site outside MD land at any distance complete all as specified and as directed by Engineer-in-charge. 1 Per\nCum
59 59 Material and labour for Mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-charge. 85 Per\nKg
60 60 Material and labour for Reinforced Cement concrete, type B1, 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-charge. 0.5 Per\nCum
61 61 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bresumers, lntels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. complete all as specified and as directed by Engineer-in-charge. 5 Per\nSqm
62 62 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. complete all as specified and as directed by Engineer-in-charge. 170 Per\nSqm
63 63 Material and labour for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick , laid in sloping roof padding finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.\n 170 Per\nSqm
64 64 Material and labour for plain cement concrete type D-2 (1:4:8), using 40 mm graded crushed stone aggregate, 50 mm thick , as in sub base complete all as specified and as directed by Engineer-in-charge.\n 100 Per\nSqm
65 65 Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 mixed with water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions complete all as specified and as directed by Engineer-in-charge.( Note : WPC shall be measured and paid separately)\n 170 Per\nSqm
66 66 Supply only integral water proofing compound ( liquid ) conforming to IS : 2645-2005 complete all as specified and as directed by Engineer-in-charge. 4.6 Per\nLitre
67 67 Material and labour APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric ( wt. not less than 160 gms/sqm) applying evenly one coat of bitumen oil based primer conforming to IS 3384-1965 @ 0.3 Kg/Sqm laid on primed surface by forced application complete all as specified and as directed by Engineer-in-charge. 170 Per\nSqm
68 68 Material and labour for preparation of surface of any description over 10 cm width or girth and applying two coats of Aluminium paint over a coat of suitable primer complete all as specified and as directed by Engineer-in-charge.\n 170 Per\nSqm
69 69 Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. including removing rubbish material from work site complete all as specified and as directed by Engineer-in-charge.\n 2 Per\nSqm
70 70 Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.\n 2 Per\nSqm
71 71 Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.\n 12 Per\nSqm
72 72 Material and labour for preparation of newly plastered surface of walls, applying two coats of cement base paint, white or tinted over one coat of chalk whiting of walls including washing floors, etc.of drops and splashes complete all as specified and as directed by Engineer-in-charge.\n\n 2 Per\nSqm
73 73 Material and labour for preparation of newly plastered surfaces of walls and applying two coats of acrylic based distemper emulsion, of any tint/shade over a coat of cement based primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and as directed by Engineer-in-charge.\n 12 Per\nSqm
74 74 Material and Labour for 2nd class hard wood (well seasoned) scantling clean sawn as in framed work etc complete all as specified and as directed by Engineer-in-charge. 0.2 Per\nCum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail