}

1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lacs ) 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lac, 1. Construction of Art Craft Room at Govt Girls Hi-Jammu And Kashmir

Rashtriya Madhyamika Shiksha Abhiyana-RMSA has published 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lacs ) 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lac. Submission Date for this Tender is 17-03-2020. Building Work Tenders in 1. Construction of Art Craft Room at Govt Girls Hi Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

23755222
Corrigendum : 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lacs ) 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lac
Open Tender
Indian
Jammu And Kashmir
1. Construction of Art Craft Room at Govt Girls Hi
17-03-2020

Tender Details

1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lacs ) 1 . Construction Of Art Craft Room At Govt Girls High School Atholi , Zone Paddar , District Kishtwar ( Rs . 12 . 19 Lacs ) 2 . Construction Of Art Craft Room At Govt Higher Secondary School Paddar , Zone Paddar , District Kishtwar ( Rs . 12 . 26 Lacs ) 3 . C

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 10-Mar-2020 Date Extension 323 Date 17-03-2020

Key Value

Document Fees
INR 1000 /-
EMD
INR 52860.0 /-
Tender Value
INR 26.43 Lakhs /-

BOQ Items

Name of Work: 1. Construction of Art Craft Room at Govt Girls High School Atholi, Zone Paddar, District Kishtwar (Rs. 12.19 lacs) 2. Construction of Art Craft Room at Govt Higher Secondary School Paddar, Zone Paddar, District Kishtwar (Rs. 12.26 lacs) 3. Construction Of CWSN Toilet at Govt Girls High School Atholi, Zone Paddar, District Kishtwar (Rs. 1.98 lacs)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Construction of Art Craft Room at Govt Girls High School Atholi, Zone Paddar, District Kishtwar (Rs. 12.19 lacs)
2 2 Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 60% all kinds of soil and 40% ordinary rock)\n BI01010001010000000000000515BI0100001114 25.47 cum
3 3 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: ( 60% All kinds of soil and 40% ordinary rock) BI01010001010000000000000515BI0100001115 49.3 cum
4 4 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all lead lift and carriages. BI01010001010000000000000515BI0100001116 11.68 cum
5 5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)including all lead lift and carriages.\n\n BI01010001010000000000000515BI0100001117 10.68 cum
6 6 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. BI01010001010000000000000515BI0100001118 5.92 cum
7 7 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed including all lead lift and carriages. BI01010001010000000000000515BI0100001119 20.8 Cum
8 8 Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) including all lead lift and carriages. BI01010001010000000000000515BI0100001120 20.04 Cum
9 9 Extra for brick works in superstructure above plinth level upto V floor(By manual means) BI01010001010000000000000515BI0100001121 20.04 cum
10 10 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. including all lead lift and carriages. BI01010001010000000000000515BI0100001122 1660 Kg
11 11 Centering and shuttering including strutting~ propping etc \nand removal of form work for.foundations footings bases of columns. BI01010001010000000000000515BI0100001123 81.94 sqm
12 12 Centering and shuttering including strutting~ propping etc \nand removal of form work for columns, piers, abutments, pillars, posts, and struts BI01010001010000000000000515BI0100001125 35.5 sqm
13 13 Centering and shuttermg including strutting, propping etc. \nand removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers. BI01010001010000000000000515BI0100001126 30.65 sqm
14 14 Strctural steel work welded in built up sections, trusses \nand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel \nprimer all complete. including all lead lift and carriages. BI01010001010000000000000515BI0100001127 2545.9 Kg
15 15 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift and carriages. 95.86 sqm
16 16 12 mm thick cement sand plaster in 1:6 mix including all lead lift and carriages. 134.76 sqm
17 17 6mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift and carriages. 17.24 sqm
18 18 Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hings bright finished of required size with necessary 35 screws.(Second Class Kail Wood) 10.09 sqm
19 19 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. 18.12 Cum
20 20 Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. 4.53 Cum
21 21 Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate.Crushed 6mm thick including all lead lift and carriages. 65.07 sqm
22 22 Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and \nshape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 including all lead lift and carriages. 93.2 sqm
23 23 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2 8.38 mtr
24 24 Providing and fixing insulating board ceiling of approved quality \nwith necessary nails etc. complete (frame work to be paid \nseparately) : 6 mm thick 61.68 sqm
25 25 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood 0.54 Cum
26 26 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft) 18.16 sqm
27 27 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 18.16 sqm
28 28 Providing and applying cement based putty of average thicknes 2 mm of approved brand and manufacture over the plastered walls surface to prepare the surface even and smooth complete. 95.86 sqm
29 29 Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm 152 sqm
30 30 Making plinth protection 50 mm thick of cement concrete 1:3:6\n( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm\nnominal size) over 75mm bed of dry brick ballast 40mm nominal\nsize well rammed and consolidated and grouted with fine sand\nincluding finishing the top smooth. Crushed. including all lead lift and carriages. 22.29 sqm
31 31 Providing and fixing aluminium tower bolts lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour or \nshade with necessary screws etc. complete : 100x10 mm 30 Each
32 32 Providing and fixing aluminium tower bolts lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour or \nshade with necessary screws etc. complete : 200x10 mm 2 Each
33 33 Providing and fixing aluminium sliding door bolts lSI \nmarked anodised (anodic coating not less than grade AC \n10 as per IS : 1868) transparent or dyed to required colour \nor shade with nuts and screws etc. complete : 250x16 mm 1 Each
34 34 Providing and fixing aluminium handles lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour and \nshade with necessary screws etc. complete. 100 mm 16 Each
35 35 Providing and fixing aluminium handles lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour and \nshade with necessary screws etc. complete. 125 mm 2 Each
36 36 Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper \n 1 Each
37 37 Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge 12 point
38 38 Providing and fixing plain eves boarding readymade G.I. Sheets including (250x32mm) second class kail wood 41.14 metre
39 39 Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand).including all lead lift and carriages. 6.79 cum
40 40 Dry random rubble masonry with hard stone in foundation and plinth Using nallah stone without bond stone including all lead lift and carriages. 10.18 cum
41 41 Construction of Art Craft Room at Govt Higher Secondary School Paddar, Zone Paddar, District Kishtwar (Rs. 12.26 lacs)
42 42 Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 60% all kinds of soil and 40% ordinary rock)\n 25.47 cum
43 43 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: ( 60% All kinds of soil and 40% ordinary rock) 49.3 cum
44 44 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all lead lift and carriages. 11.68 cum
45 45 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)including all lead lift and carriages.\n\n 10.68 cum
46 46 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 5.92 cum
47 47 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed including all lead lift and carriages. 20.8 Cum
48 48 Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) including all lead lift and carriages. 20.04 Cum
49 49 Extra for brick works in superstructure above plinth level upto V floor(By manual means) 20.04 cum
50 50 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. including all lead lift and carriages. 1660 Kg
51 51 Centering and shuttering including strutting~ propping etc \nand removal of form work for.foundations footings bases of columns. 81.94 sqm
52 52 Centering and shuttering including strutting~ propping etc \nand removal of form work for columns, piers, abutments, pillars, posts, and struts 35.5 sqm
53 53 Centering and shuttermg including strutting, propping etc. \nand removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers. 30.65 sqm
54 54 Strctural steel work welded in built up sections, trusses \nand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including all lead lift and carriages. 2545.9 Kg
55 55 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift and carriages. 95.86 sqm
56 56 12 mm thick cement sand plaster in 1:6 mix including all lead lift and carriages. 134.76 sqm
57 57 6mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift and carriages. 17.24 sqm
58 58 Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hings bright finished of required size with necessary 35 screws.(Second Class Kail Wood) 10.09 sqm
59 59 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. 18.12 Cum
60 60 Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. 4.53 Cum
61 61 Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate.Crushed 6mm thick including all lead lift and carriages. 65.07 sqm
62 62 Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and \nshape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 including all lead lift and carriages. 93.2 sqm
63 63 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2 8.38 mtr
64 64 Providing and fixing insulating board ceiling of approved quality \nwith necessary nails etc. complete (frame work to be paid \nseparately) : 6 mm thick 61.68 sqm
65 65 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood 0.54 Cum
66 66 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft) 18.16 sqm
67 67 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 18.16 sqm
68 68 Providing and applying cement based putty of average thicknes 2 mm of approved brand and manufacture over the plastered walls surface to prepare the surface even and smooth complete. 95.86 sqm
69 69 Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm 152 sqm
70 70 Making plinth protection 50 mm thick of cement concrete 1:3:6\n( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm\nnominal size) over 75mm bed of dry brick ballast 40mm nominal\nsize well rammed and consolidated and grouted with fine sand\nincluding finishing the top smooth. Crushed. including all lead lift and carriages. 22.29 sqm
71 71 Providing and fixing aluminium tower bolts lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour or \nshade with necessary screws etc. complete : 100x10 mm 30 Each
72 72 Providing and fixing aluminium tower bolts lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour or \nshade with necessary screws etc. complete : 200x10 mm 2 Each
73 73 Providing and fixing aluminium sliding door bolts lSI \nmarked anodised (anodic coating not less than grade AC \n10 as per IS : 1868) transparent or dyed to required colour \nor shade with nuts and screws etc. complete : 250x16 mm 1 Each
74 74 Providing and fixing aluminium handles lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour and \nshade with necessary screws etc. complete. 100 mm 16 Each
75 75 Providing and fixing aluminium handles lSI marked \nanodised (anodic coating not less than grade AC 10 as \nper IS : 1868) transparent or dyed to required colour and \nshade with necessary screws etc. complete. 125 mm 2 Each
76 76 Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper \n 1 Each
77 77 Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge 12 point
78 78 Providing and fixing plain eves boarding readymade G.I. Sheets including (250x32mm) second class kail wood 41.14 metre
79 79 Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand). including all lead lift and carriages. 6.79 cum
80 80 Dry random rubble masonry with hard stone in foundation and plinth Using nallah stone without bond stone including all lead lift and carriages. 10.18 cum
81 81 Construction Of CWSN Toilet at Govt Girls High School Atholi, Zone Paddar, District Kishtwar (Rs. 1.98 lacs)
82 82 Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil. 11.61 Cum
83 83 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:4:8 ( 1 cement 4 fine sand 8 graded stone aggregates), with 40mm nominal size of (crushed stone aggregates). including all lead lift and carriages 2.56 Cum
84 84 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:3:6 ( 1 cement 3 fine sand 6 graded stone aggregates), with 20mm nominal size of (crushed stone aggregates). including all lead lift and carriages 2.95 Cum
85 85 Providing and laying of damp proof course of 50 mm thick with cement concrete 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates),mix with 20 mm thick crushed stone aggregates. including all lead lift and carriages 10.87 Sqm
86 86 Common burnt clay F.P.S (non modular bricks of class designation 75 in foundation & plinth cement mortar 1:6 (1 cement 6 fine sand) including all lead lift and carriages 6.84 cum
87 87 Extra for brick work in superstructure above plinth level upto floor V level (by manual mean) 6.84 cum
88 88 Providing and laying in position of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering finishing and reinforcement. All work upto Plinth level 1:1.5:3 (1 cement 1.5 coarse sand 3 graded stone aggregates 20mm nominal size )including all lead lift and carriages 0.67 cum
89 89 Reinforcement of R.C.C work including straightening cutting,bending,placing in position and binding all complete.thermo mechanically treated bars including all lead lift and carriages 67 kg
90 90 Centring and shuttermg including strutting, propping etc. and removal of form for foundation 12.68 Sqm
91 91 Centring and shuttermg including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms 5.41 Sqm
92 92 Edges of slab and breaks in floors and walls(under 20 cms wide) 7.92 MTR
93 93 Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer all complete including all lead lift and carriages \n 50.35 kg
94 94 15 mm thick. Cement plaster in 1:6 (1 cement:6 fine sand ) ,including all lead lift and carriages 33.3 sqm
95 95 12 mm thick plaster in 1:6 , 1 cement:4 fine sand )including all lead lift and carriages 17.41 Sqm
96 96 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. 3.04 Sqm
97 97 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass panes 0.59 Sqm
98 98 50 mm thick cement concrete flooring 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates 20 mm nominal size) finished with floating coat of neat cement slurry but excluding cost of nosing of steps etc complete crushed. including all lead lift and carriages 3.02 Sqm
99 99 Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 5.71 Sqm
100 100 Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. 5.71 sqm
101 101 White washing with lime to give an even shade with three or more coats for new work. 30.42 Sqm
102 102 Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.including all lead lift and carriages 4.88 Cum
103 103 Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. 1.68 Cum
104 104 Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete 3.02 Sqm
105 105 Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 9.17 Sqm
106 106 Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flushwith fittings, C.I./M.S. brackets 40mm bend diameter flushbend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend. 1 each
107 107 Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequired:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps 1 each
108 108 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350mmand 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brakets, cutting and making good the wafls and floors wherever required:One urinal basin with 5 litre P.V.C white automatic flushing cistern of approved quality. 1 each
109 109 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1 each
110 110 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms. 2 each
111 111 Providing and placing on terrace ( at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. 1000 Lit
112 112 Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc (INTERNAL WORK-Exposed on wall (15 mm dia. nominal bore) medium 13.72 mtr
113 113 Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 20 mm dia. Gl pipe Medium) 9.15 mtr
114 114 Providing and fixing brass bib cock of approved quali1ty. 15 mm nominal bore 2 each
115 115 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms. 15 mm nominal bore 1 each
116 116 Providing and fixing C.P. brass angle valve for basin mixerand gyser points of approved make conforming to IS : 8931 (15 mm nominal bore) 5 each
117 117 Providing and fixing PVC waste pipe of sink or wash basin including PVC waste fitting complete. 32 mm dia 2 each
118 118 Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. 3 each
119 119 Providing and fixing PVC soil waste / rain water disposal pipe 100mm dia 6 each
120 120 Providing and fixing PVC Bend 100 MM dia 2 each
121 121 Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.including all lead lift and carriages 100 Kg
122 122 Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge 3 Point
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail