}

Establishment Of Skill Center For Nels Under Mdhfw For Medical Colleges At K.M.C, Warangal In Warangal Urban District, WARANGAL (URBAN)-Telangana

Telangana State Medical Services And Infrastructure Development Corporation-TSMSIDC has published Establishment Of Skill Center For Nels Under Mdhfw For Medical Colleges At K.M.C, Warangal In Warangal Urban District. Submission Date for this Tender is 03-03-2020. Building Work Tenders in WARANGAL (URBAN) Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

23755170
Establishment Of Skill Center For Nels Under Mdhfw For Medical Colleges At K.M.C, Warangal In Warangal Urban District
Open Tender
Indian
Telangana
WARANGAL (URBAN)
03-03-2020

Tender Details

Establishment Of Skill Center For Nels Under Mdhfw For Medical Colleges At K.M.C, Warangal In Warangal Urban District

Key Value

Document Fees
Refer document
EMD
INR 37500.0 /-
Tender Value
INR 37.40 Lakhs /-

BOQ Items

S.No Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
1 Establishment of Skill Center at K.M.C, Warangal Standard Specification 9.00 EACH 2547.00 22923.00
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200 to 250V. rated for 4 KVA maximum load and time delay model with Volt meter, selector switch, 6A / 16A flush type, 5 pin socket for out put and with 3 core flexible chord and 3 pin 6/16A plug top suitable for refrigerator for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Makes : V-Guard / Real Guard / Uni Stab / ITL
2 Establishment of Skill Center at K.M.C, Warangal Standard Specification 9.00 EACH 38658.00 347922.00
Supply, transportation and installation of split AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3.5 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible chord , built-in stabilizer (Voltage range 160- 264 volts) and cordless remote control. 1.5 TR 3 Star capable of delivering 18000 BTU/hr and above of Makes : Daikin / Thoshiba / O General/Blue Star
3 Establishment of Skill Center at K.M.C, Warangal Standard Specification 25.00 EACH 210.00 5250.00
Termination of UG cables of 3.5 core 35 Sq.mm including with required Heavy duty cable glands, Lugs complete with all required accessories as directed by the department including cost and conveyance of all materials and labour charges etc., complete.
4 Establishment of Skill Center at K.M.C, Warangal Standard Specification 25.00 RM 34.00 850.00
Laying of PVC armoured under ground cable up to 95 Sqmm fixing on chromium plated metallic base saddles on wall as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete.
5 Establishment of Skill Center at K.M.C, Warangal Standard Specification 25.00 RM 235.00 5875.00
Supply of 35 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Universal / Unicab / Polycab / Havells / Gloster / KEI.
6 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 EACH 589.00 589.00
Labour charges for fixing the Light duty exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
7 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 EACH 1395.00 1395.00
Supply,Transportation of light duty exhaust fan 12"(300 mm) size 900 rpm with metal blades wiremesh with all accessories etc complete Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air.
8 Establishment of Skill Center at K.M.C, Warangal Standard Specification 14.00 EACH 109.00 1526.00
Supply and erecting 19/20mm steel tube down rod of two meter length with bolts & nuts duly painted with matching colour of fan complete
9 Establishment of Skill Center at K.M.C, Warangal Standard Specification 14.00 EACH 133.00 1862.00
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
10 Establishment of Skill Center at K.M.C, Warangal Standard Specification 14.00 EACH 329.00 4606.00
Supply and fixing of Modular type Stepped electronic regulator Makes : GM Four-Five / Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus/ Cabtree Verna/ Million logus / Gold Medal Curve for sweep AC ceiling fans of 1200mm / 1400mm complete with connections.
11 Establishment of Skill Center at K.M.C, Warangal Standard Specification 14.00 EACH 2481.00 34734.00
Supply and transportation of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator. Makes : Crompton HS Decora / Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown / Usha technix decorative.
12 Establishment of Skill Center at K.M.C, Warangal Standard Specification 25.00 EACH 85.00 2125.00
Supply and fixing of ISI mark batten holder / slanting holder Makes : Anchor / Gold Medal Olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 5.0W LED Lamp Makes: Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells / Halonix / HPL/Surya/Sysa.
13 Establishment of Skill Center at K.M.C, Warangal Standard Specification 46.00 EACH 1454.00 66884.00
Supply and transportation of 18W edge lit LED slimline panel Light Housing made of Powder coated, round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >90 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete. MAKE : Phillips / OSRAM / GE / Crompton / Bajaj / Havells / Halonix / HPL / Wipro / Surya / Jaquar.
14 Establishment of Skill Center at K.M.C, Warangal Standard Specification 15.00 EACH 3941.00 59115.00
Supply and Transportation 36W Edge lit, 2\ x2\ (600mm x600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete. MAKE: Phillips / OSRAM / GE / Crompton / Bajaj / Havells / Halonix / HPL / Wipro / Surya / Jaquar.
15 Establishment of Skill Center at K.M.C, Warangal Standard Specification 20.00 EACH 752.00 15040.00
Supply, Transportation and fixing of 20W, 2000 lumens, T8,1200mm length LED tube light with batten, input voltage AC 220 - 260Volts with PF=0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI=80,.etc., complete Manufacture has to submit LM79,LM80 & Photobiological Safety Report. Luminaire Performance Complies to IS10322 (Part 5/Sec 3) & IEC 60598-1,IEC 60529 ISO certified company Including fixing on wall / ceiling with fixing arragements including with inter connections etc complete. MAKE: Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells / HPL/ Surya / Syska.
16 Establishment of Skill Center at K.M.C, Warangal Standard Specification 15.00 RM 804.00 12060.00
Supply and Run of 25mm x 6mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (1.34 Kg / Mtr)
17 Establishment of Skill Center at K.M.C, Warangal Standard Specification 15.00 RM 87.00 1305.00
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)
18 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 Each 12360.00 12360.00
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia \B\ Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
19 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 Each 30577.00 30577.00
Supply and fixing of 8 Way VTPN DB with IP 43 Protection and Supply and Fixing of 1 No., of 125A TPN MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted as incomer with 8 Nos of 63A, 10KA, TP MCBs C/D Curve ISI Mark as Out goings including internal connections and labour charges etc., complete. Makes : Legrand / Schneider
20 Establishment of Skill Center at K.M.C, Warangal Standard Specification 3.00 Each 7446.00 22338.00
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 Makes : Legrand / Shneider and Supply and Fixing of 1 No., of 100A FP Isolator as incomer and 12 Nos 6-32 A 10kA SP MCBs Makes : Legrand-DX3 / Schneider-Acti9 as out goings including internal connections and labour charges for FLUSH Mounting etc., complete for DBs.
21 Establishment of Skill Center at K.M.C, Warangal Standard Specification 10.00 Each 1325.00 13250.00
Supply and fixing of DP Metal Enclosure with IP 20 Protection DB Make with 1 No 20A, 10 KA DP MCB Make: Legrand / Schneider including internal connection and labour charges for Flush Mounting etc., complete. Makes : Legrand / Schneider.
22 Establishment of Skill Center at K.M.C, Warangal Standard Specification 20.00 RM 432.00 8640.00
Supply & run of 5 of 10.0 Sqmm (140/0.3 mm) (3 phases, neutral and earth) FRLS / HFFR PVC insulated flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] Makes of wires : Finolex / RR Kabel / Havells / KEI / L&T / Polycab / HPL / RPG / Power flex / GM / Million / Gold Medal.
23 Establishment of Skill Center at K.M.C, Warangal Standard Specification 30.00 RM 294.00 8820.00
Supply & run of 5 of 6.0 Sqmm (84/0.3mm) (3 phases, neutral and earth) FRLS / HFFR PVC insulated flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for LDBs] Makes of wires:- Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal.
24 Establishment of Skill Center at K.M.C, Warangal Standard Specification 320.00 RM 119.00 38080.00
Supply and 3 runs of 4.0 sq mm (56/0.3 mm) (phase neutral and earth) FRLS / HFFR PVC insulated flexible copper cable in existing conduit pipe including labour charges etc., complete for 16A sockets. Makes of wires:- Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal.
25 Establishment of Skill Center at K.M.C, Warangal Standard Specification 550.00 RM 84.00 46200.00
Supply and run of 3 of 2.5 sq.mm (36/0.mm) (phase neutral and earth) FRLS / HFFR PVC insulated flexible copper cable in existing conduit pipe for individual lighting circuits including labour charges etc., complete as required for switch boards. Makes of wires:- Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal.
26 Establishment of Skill Center at K.M.C, Warangal Standard Specification 185.00 RM 19.00 3515.00
Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / HFFR P.V.C. insulated flexible copper cable in existing conduit pipe for earth continuity including all labour charges etc., complete. Makes of wires:- Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal.
27 Establishment of Skill Center at K.M.C, Warangal Standard Specification 15.00 Each 444.00 6660.00
Supply & fixing of 16A/6A, 2 in one socket with 16A switch control modular type with and GI switch box with front cover plate including all labour charges etc., complete. Makes of switches:- GM Four-Five / Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus/ Cabtree Verona/ Million logus / Gold Medal Curve.
28 Establishment of Skill Center at K.M.C, Warangal Standard Specification 40.00 Each 713.00 28520.00
Supply and fixing of 6A switchs - 2 Nos and 6A 3/2 pin socket - 2 Nos Modular type with cover plate and GI switch box fixing on separate board including all labour charges etc., complete. Makes of wires : Finolex / RR Kabel / Havells / KEI / L&T / Polycab / HPL / RPG / Power flex / GM / Million / Gold Medal. Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Salzar / Stanjo Amron / Havells Fabio.
29 Establishment of Skill Center at K.M.C, Warangal Standard Specification 30.00 Each 353.00 10590.00
Supply and fixing of 6A ISI Mark 3/2 pin Modular socket with 6A 1way Modular switch, 3 Module box with cover frame and GI switch box on common switch board with connections etc., complete. Makes of wires : Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal. Makes of switches:- GM Four-Five / Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus/ Cabtree Verna/ Million logus / Gold Medal Curve.
30 Establishment of Skill Center at K.M.C, Warangal Standard Specification 115.00 Each Point 529.00 60835.00
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switches with cover plate and GI switch box including all labour charges etc., complete. (for Non-Residential Building) Makes of wires : Finolex/ RR Cable/ Havells/ Polycab/ HPL/ RPG/ Power flex / GM / Million / Gold Medal. Makes of switches:- GM Four-Five / Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus/ Cabtree Verna/ Million logus / Gold Medal Curve.
31 Establishment of Skill Center at K.M.C, Warangal Standard Specification 400.00 RM 70.00 28000.00
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe concealed in wall with all required PVC / Metallic Junction Boxes including masonary work and labour charges etc., Makes : Sudhakar / GM / Modi / Million Plast.
32 Establishment of Skill Center at K.M.C, Warangal APSS No. 1302 1319 & 1326 25.00 RM 245.00 6125.00
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, etc. for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 110MMM DIA
33 Establishment of Skill Center at K.M.C, Warangal Standard Specification 50.00 RM 206.00 10300.00
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc. complete for finished item of work at all floor levels. 28.60mm OD pipe
34 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 Each 1088.00 1088.00
S&F of 15 mm brass body Premium variety Chromium plated finish single lever pillar cock with aerator of not less than 500 grams weight quarter turn spindle conforming to IS 8931 and with a warranty of 10 years TBSP-F.II-05
35 Establishment of Skill Center at K.M.C, Warangal Standard Specification 1.00 Each 6224.00 6224.00
Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces etc. complete.for finished item of work in all floors.
36 Establishment of Skill Center at K.M.C, Warangal Standard Specification 8.01 Sqm 2768.00 22172.00
Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size 75mm x 40mm and MDF Board Interior grade both sides laminated 18mm thick for shutters with 18mm x 12mm teak wood beading alround and supplying and fixing powder coated MS fixtures 3 Nos. butt hinges of size 100mm long(for each shutter), tower bolt 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm long and standard locking arrangements for shutters including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.
37 Establishment of Skill Center at K.M.C, Warangal APSS No. 402 & 403 5.88 Sqm 483.00 2840.00
Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete using Concrete Batching Plant including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, labour charges such as weigh batching, machine mixing, laying concrete, lift charges, curing etc., complete for finished item of work (APSS No. 402 & 403) for platforms and shelves. 50mm thick platforms :
38 Establishment of Skill Center at K.M.C, Warangal S.S.701 & special 5.88 Sqm 4013.00 23596.00
Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges and all other taxes on all materials, cost of base coat complete for finished item of work for platforms (S.S.701 & special)
39 Establishment of Skill Center at K.M.C, Warangal SS 901,903 & 904 12.29 Sqm 463.00 5688.00
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work. (SS 901,903 & 904). Third Floor
40 Establishment of Skill Center at K.M.C, Warangal APSS No. of 501 & 509 5.67 Sqm 845.00 4791.00
Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509). Third Floor
41 Establishment of Skill Center at K.M.C, Warangal Standard Specification 56.16 Sqm 7270.00 408283.00
Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ?D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 ? 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work etc., complete for finished item of work in all floors.
42 Establishment of Skill Center at K.M.C, Warangal Standard Specification 438.20 Sqm 3670.00 1608194.00
Supply and fixing powder coated aluminium partly glazed partitions as per the approved drawing using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame top and middle rail and bottom rail powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in middle portion, in the top bottom with 12mm thick prelaminated particle board ( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable aluminium glazing clips and rubber beading, and as approved by Engineer-in-Charge with required No. of screws etc. complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer) (2930mmx2750mm)
43 Establishment of Skill Center at K.M.C, Warangal Standard Specification 27.30 Sqm 5741.00 156729.00
Supply and fixing powder coated aluminium fully glazed door as per the approved drawing with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, single shutter fitted with 5 mm thick plain float glass with suitable aluminium glazing clips and rubber beading in the top half and 12mm thick prelaminated particle board (One side choice colour and other side balancing white lamnation) in the bottom half fitted with suitable aluminium glazing clips including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos of Al. Butt hinges 150mm long, 1 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 2 Nos.alluminium handles (IS:208) 150mm dia and 1 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer) (1000mm x 2100mm).
44 Establishment of Skill Center at K.M.C, Warangal Standard Specification 11.70 Sqm 5309.00 62115.00
Supply and fixing powder coated aluminium fully glazed door as per the approved drawing with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board (One side choice colour and other side balancing white lamnation) in the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required, embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer) (1500mm x 2600mm).
45 Establishment of Skill Center at K.M.C, Warangal Standard Specification 18.72 Sqm 4876.00 91279.00
Supply and fixing powder coated aluminium fully glazed door as per the approved drawing with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board (One side choice colour and other side balancing white lamnation) in the bottom half fitted with suitable aluminium glazing clips and rubber beading, including supply and fixing with ISI marked Al Butt hinges 150mm long 6 Nos, ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer) (1800mm x 2600mm).
46 Establishment of Skill Center at K.M.C, Warangal Standard Specification 471.05 Sqm 909.00 428184.00
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) for fixing to ceiling (2x2m) at 5.4 Mtrs height fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat etc., complete for finished item of work
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail