}

Special Repair Of Seminar Room At Cqapp In Dgqa Complex And Provn Of Exhaust Fans In Certain Married Accn At Kanpur Cantt Under Gei Kanpur, Kanpur Cantt-Uttar Pradesh

Military Engineer Services-MES has published Special Repair Of Seminar Room At Cqapp In Dgqa Complex And Provn Of Exhaust Fans In Certain Married Accn At Kanpur Cantt Under Gei Kanpur. Submission Date for this Tender is 16-04-2020. Ceiling Fan Tenders in Kanpur Cantt Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

23740575
Corrigendum : Special Repair Of Seminar Room At Cqapp In Dgqa Complex And Provn Of Exhaust Fans In Certain Married Accn At Kanpur Cantt Under Gei Kanpur
National Competitive Bid
Indian
Uttar Pradesh
Kanpur Cantt
16-04-2020

Tender Details

Special Repair Of Seminar Room At Cqapp In Dgqa Complex And Provn Of Exhaust Fans In Certain Married Accn At Kanpur Cantt Under Gei Kanpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 05-Mar-2020 REVISION DATE Date 19-03-2020
2 16-Mar-2020 DATE EXTEND Date 23-03-2020
3 26-Mar-2020 date pstponed further 260320 Date 16-04-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 55000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: SPECIAL REPAIR OF SEMINAR ROOM AT CQA(PP) IN DGQA COMPLEX AND PROVN OF EXHAUST FANS IN CERTAIN MARRIED ACCN AT KANPUR CANTT UNDER GE(I) KANPUR
Sl. No. Description of Items/Works Item Code / Make Quantity Units
1 1 BnR Schedule
2 2 Taking down cement plaster on brick or stone wall/ceiling etc including racking out joints hacking for key scrubbing down with water etc complete, all as directed by Engineer –in-charge. 150 Sqm
3 3 Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing etc.complete all as specified and directed. 5 Cum
4 4 Demolition of reinforced cement concrete of roofs, floors (other than ground floors) beams staircases landing chajjas and similar suspended work etc complete all as specified and directed. 2 Cum
5 5 Demolition of cement concrete etc(unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level complete all as directed by Engineer –in-charge. 7.99 Cum
6 6 M&L Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 comlete all as specified and as directed. 1 Cum
7 7 M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of concrete or brick finished even and fair complete all as specified and directed. 5 Sqm
8 8 M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface finished even and fair mixed with water proofing compound as per manufacturer istruction complete all as specified and directed. 190 Sqm
9 9 M&L for applying 2 mm thick white wall care putty on newly plastered or undecorated surface internal/external surface of building to prepare the surface smooth, to make the edges sharp and proper in alignment including rubbing with sand paper to achieve a smooth surface and sharp straight edges ,upto the height of double storey building .all as specified and directed. 220 Sqm
10 10 M&L for applying two coat oil bound distemper over a coat of primer complete all as specified and directed. 220 Sqm
11 11 M&L for applying two coat of weather coat exterior emultion paint over a coat of primer complete all as specified and directed. 300 Sqm
12 12 Material and labour for light colour vitrified tiles 10mm thick(square/ rectengular), light shed, polished , area of each tiles exceeding 0.36 sqm, as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, .laid over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. all as specified and as directed.Note: Colour, design and pattern shall be approved by GE(I). 165 Sqm
13 13 All as per item no 12 above but dark colour vitrified tiles. 5 Sqm
14 14 Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and clearing rubbish off the premise complete all as specified and directed. 16 Sqm
15 15 M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:4 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I). 5 Sqm
16 16 M&L for glazed ceramic coloured tiles 300x450x 7 to 8 mm thick on vertical surfaces such as skiting/dado set and jointed in neat cement slurry and pointed in colour cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I). 11 Sqm
17 17 M&L for powder coated aluminium glazed window shutters with frame openable using 100 x 45 x 2.00mm thick aluminium sec for frame & section for shutter 45 x 44.45 x 1.90 mm thick incl 5mm thick glass sheet with rubber beading clip, hinges, handles, tower bolts etc complete complete all as specified. 20 Sqm
18 18 M&L for powder coated aluminium grill of mesh size 65 x 75mm of 6mm dia of aluminium bar fixed with 'Y' or 'H' aluminium sec all as specified 20 Sqm
19 19 M & L for providing PVC false ceiling consisting of 600mm x 600mm , 5 mm thick plain PVC Sheet of density 600kg/cbm used as a panel insert in a frame work made using anodised aluminium 'T' section of size 25mmx25mm of 19 gauge or 1 mm thick i a square pattern of grid sizes of 600x600mm. The aluminium frame work shall be supported from the ceiling with the help of ' J' hook and G.I. wire 4mm dia /6 mm MS rods of required sizes to maintain proper level etc. The aluminium frame work shall supported on side wall with the use of aluminium "L" section of size 25x25 mm angles etc complete all as specified and directed by Engineer in charge and as per manufacturer's specification. Make : Rajshri / Everest/Sintex as approved by GE(I). 160 Sqm
20 20 Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height complete all as specified and directed. 160 Sqm
21 21 M & L Solid PVC wall lining complete consisting of 5 mm thick single side prelaminated PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame incl taking down complete all as per manufacturers specification and all as directed. Make: Rajshri Plastiwood 80 Sqm
22 22 M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed by Engr in Charge.Make: Rajshri Plastiwood 150 RM
23 23 Dismantiling of AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.\n 500 Sqm
24 24 Dismantiling of AC ridge any type any size situated over AC sheet roofing complete all as specified and directed.\n 70 RM
25 25 S & F regular modified Polyester colour coated galvanized steel rib profile sheet(TCT) 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws as specified. Make: (a) Lloyd Insulation\n(b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd\n(d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd\n(g) Everest Industries 700 Sqm
26 26 S&F regular modified Polyester colour coated galvanized steel rib profile sheet(TCT) of 0.50 mm thick having tensile strength of 550 Mpa in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws of reqd size and dia with head having matching colour PVC cap/ painted as of sheet total mass coating 150gms/sqm (both side) in roofing complete all as specified and directed.Make: (a) Lloyd Insulation\n(b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd\n(d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd\n(g) Everest Industries 70 Sqm
27 27 S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed at site. 2500 Kg
28 28 M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 240 Sqm
29 29 Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and directed.\n 0.75 Cum
30 30 Removal of dismantled/demolished unserviceable rubbish material to a distance exc 1500 metre but not exc 2000 metre from the starting point outside DGQA complex complete all as specified and directed. 11 Cum
31 31 M & L 75 mm thick PCC type C-1, 1:3:6 (20mm graded stone aggregate) for plinth protection surface finished even and smooth without using extra cement complete all as specified and directed. 70 Sqm
32 32 S&F for venetion blind for windows 100mm wide vertical type of fabric as approved including all accesories of make VISTA or equivalent complete all specified and directed. 20 Sqm
33 33 Taking up or down 15 mm bore GI pipe and connections, from trenches/walls with due care including cleaning properly, for re-fixing or removal from site, complete all as specified and directed. 30 RM
34 34 S&F 15mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed. Make : TATA/Jindal/ Prakash Surya as approved by GE. 30 RM
35 35 S&F in repair Vitreous china suatting pan of Orrissa pattern size 580x440mm white with integral foot rest including P trap or S trap front ot back, PCC bedding 1:5:10 type E-2 using 40 mm graded brick aggregate complete all as directed. Make : Hindware/ Cera/ Parryware as approved by GE. 1 Each
36 36 S&F in repair Pillar tap fancy type " pressure with or without letter cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'HOT or cold with long screwed shanks and fly nuts screwed shanks and fly nuts screwed for irion pipe and fixed complete all as specified and as directed. Make : L&K / Plumber / Jaquar/Prayag/Marc as approved by GE. 1 Each
37 37 S&F in repair vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed. Make : Hindware/ Cera/ Parryware as approved by GE. 1 Each
38 38 S&F in repair 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to squat pattern.Make : Hindware/ Cera/ Parryware/ Prayag as approved by GE. 1 Each
39 39 S&F in repair HDPE triple layer rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size and 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make: Sintex/Dhara/JS Polyplast 1 Each
40 40 S & F 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : L&K / Plumber / Jaquar/Prayag/Marc as approved by GE. 1 Each
41 41 S&F in repair 15 mm dia bib tap fancy type CP cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. Make : Hindware / L&K / Plumber / Jaquar/Prayag as approved by GE. 2 Each
42 42 S&F in repair 15 mm bore angle cock, cast copper alloy cromium plated, screwed down, high pressure, with capstan screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : Hindware / L&K / Plumber / Jaquar/ Prayag as approved by GE. 2 Each
43 43 S&F 15mm bore PVC connection 450mm long heavy duty with brass fly nut and warsher complete and all as specified and directed 2 Each
44 44 Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm each complete all as directed by Engineer-in-Charge. 6 Each
45 45 Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and as directed 8 Each
46 46 Taking down aluminium shutter of cupboards any description complete all as directed by Engineer-in-Charge. 20 Sqm
47 47 Taking down aluminium partition any description complete all as directed by Engineer-in-Charge. 60 Sqm
48 48 M& L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.Make: Rajshri Pastiwood/Sintex as approved by GE(I). 1.5 Sqm
49 49 M&L solid pvc frame ( single rebated) of size 50 mmx 47 mm made out of 5 mm plain colour PVC Sheet with homogenous fine cellular structure having smmoth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK (copper screws) screws complete all specified and as shown drawing. Make : Rajshree Plastiwood/Sintex as per approved by GE (I) 4 RM
50 50 M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified 0.15 Cum
51 51 S & F of 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.Note : Manufacturer test certificate and PVrs shall be submitted by contractor before claiming payment against this item. \n 3 Sqm
52 52 M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth when unconnected with other painting or when painted in different tint.and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 7.2 Sqm
53 53 S&F of 100 mm size PVC butt hinges of Make: Prayag or equivalent complete all as specified and directed. 3 Each
54 54 S&F of 150 mm size PVC handle of Make: Prayag or equivalent complete all as specified and directed. 2 Each
55 55 S&F of 150 mm size PVC tower bolt of Make: Prayag or equivalent complete all as specified and directed. 2 Each
56 56 S&F MS butt hinges 100mm medium weight, cold rolled and fixed 6 Each
57 57 S&F of 150 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed. 2 Each
58 58 S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 4 Each
59 59 S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. 2 Each
60 60 S&F HDPE triple layer rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size and 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make: Sintex/Dhara/JS Polyplast 1 Each
61 61 EnM Schedule
62 62 Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendents, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed. 45 Per Point
63 63 M&L for point wiring with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 25 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 3 mm thick of plastic laminated sheet ISI marked of desired colour of make : Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:-Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor. Make of cable : Finolex/Polycab/Havells/Gloster, Make of conduit : AKG/D-PLAST/FINOLEX/PLAZA as approved by GE\n
64 63.01 (a) One light/fan/bell/exhaust fan point controlled by one switch. 191 Per Point
65 63.02 (b) One 3 Pin socket outlet 5 Amps on Independent board. 6 Per Point
66 63.03 (c) One 3 Pin socket outlet 5 Amps on same board. 5 Per Point
67 64 All as per item No. 63 here in before but for one power point, independent point with 2.5 Sqmm (Nominal area) PVC insulated and unsheathed copper conductor (FRLS) multi-stranded single core cable including green colour earth wire of size 1.50 Sqmm PVC insulated and unsheathed copper conductor (FRLS) multi stranded single core cable. 6 Per Point
68 65 S&F of switch piano flush type 5/6 Amps single pole one way complete all as specified and directed. 202 Each
69 66 S&F of switch piano flush type 15/16 Amps 240 Volts single pole one way complete all as specified and directed. 6 Each
70 67 S&F of socket outlet flush type, 5 pin 6 Amps, 240 Volts complete all as specified and directed. 11 Each
71 68 S&F of socket outlet 2 in 1, 6 pin 5 & 15 Amps, 240 Volts complete all as specified and directed. 6 Each
72 69 S&F of ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.Make of item No 64 to 68 : Anchor / CONA (WAWA) / Havells / Legrand. 203 Each
73 70 Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall / floor or roof etc and applying putty complete all as specified and directed 420 RM
74 71 M & L for sub main wiring with two single core of 4 sqmm copper conductor FRLS, PVC insulated and unsheathed multi-stranded cable including PVC conduit medium grade of 25 mm dia, concealed in / surface on walls for sub main connection and 4 sqmm FRLS, PVC insulated and unsheathed multi-stranded green colour copper conductor cable as an earth wire to common earth and connected to earth dolly complete all as specified and directed. Make of cable : Finolex/Polycab/ Havells/Gloster, Make of conduit : AKG/D-PLAST/FINOLEX/PLAZA as approved by GE 170 RM
75 72 M & L for sub main wiring with two single core of 10 sqmm copper conductor FRLS, PVC insulated and unsheathed multi-stranded cable including PVC conduit medium grade of 25 mm dia, concealed in / surface on walls for sub main connection and 6 sqmm FRLS, PVC insulated and unsheathed multi-stranded green colour copper conductor cable as an earth wire to common earth and connected to earth dolly complete all as specified and directed. Make of cable : Finolex/Polycab/ Havells/Gloster, Make of conduit : AKG/D-PLAST/FINOLEX/PLAZA as approved by GE 250 RM
76 73 S&F vertical distribution board TPN 4 way with including fixing of MCCB 100 A, Four pole 16 KA as incomer, shrouded neutral bar & pan assembly, IP-43 protection, double door with flexible connecting link and MCB SP 240 Volts, 'C' curve 10 KA (5-32A)- 12 Nos as out going complete all as specified and directed. Make : Schneider Cat Part No. A9HVD04M or equialent in Legrand / HAVELLS/INDO ASIAN.\nNote : The cost of MCCB and MCBs shall deemed to be included in unit cost. 2 Each
77 74 Supply and fix single pole and neutral enclosue with a top pin and earth plug and socket complete with one SPN MCB 25 Amp 240 Volt Make : Havells Cat Part No. DHDMCDPO253025 or equivalent make of Legrand/Siemens/ABB/Indo Asian 10 Each
78 75 Supply and fixing of LED 31/34 watts with burning 50000 hrs and efficacy require 100 lumens / watt indoor recessed mounting lumninaries with all accessories suitable for armstong / grid / POP ceiling complete with electronic driver & high brightness all as specified and directed by the Engr-in-Charge. Make : Wipro cat part no CRCO10R038HP57SLAB/ Philips Cat Part No. RC380B LED34S-6500 L60W60 PSU OD S1 /Havells cat part no LHECDNLQL1W034 as approved by GE(I).. 20 Each
79 76 Supply and install of Wall mounted fan heavy duty 230 V, AC single phase, Oscillating Fan, 450 mm sweep suitable for wall mounting complete with fixing arrangement including suitable fastners etc, electric connection and writting MES No in black synthetic enamel paint / engraving tool etc in wall all as specified and directed. Make : Havells / Crompton / Usha / Bajaj/ Almonard / Orient as approved by GE(I). 8 Each
80 77 M&L for earthing with galvanised steel earth plate electrode 600x600x6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia1or bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.\n 2 Each
81 78 Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.5 m deep for under ground cable/pole fondation/ water supply pipe line and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge. 23 Cum
82 79 Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed. 21 Cum
83 80 Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed. 2 Cum
84 81 Disconnecting,dismantling and taking up or down old/u/s/cracked GI tubing with fittings including cleaning for refixing or removal from the site of Size 25 mm bore. \nNote: Excavation and earth work will be measured and paid separately under relevant items. 130 Each
85 82 Supply & Laying, jointing and leakage testing GI tubing medium grade 25 mm bore with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/walls and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate/ plastering in CM 1:4 and applying finishing coat of existing treatment) complete all as specified and as directed at site.:- Make: Tata/Jindal/Prakash Surya as approved by GE(I). Notes :(i) Excavation & earth work shall be measured & paid seperately. 130 RM
86 83 S & F stop valve 25mm dia, gun metal iron, screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe or for ferrule ISI marked including dismantling the old U/S existing valve complete 1 Each
87 84 Supply and install of Exhaust fan 230 V, AC single phase of size 380 mm sweep, 900 RPM metal body complete with fixing arrangement, electric connection grouting of nuts, bolts, in wall, electric connection and writting MES No in black synthetic enamel paint / engraving tool etc all as specified and directed. Make : Turboforce of Havells / Crompton / Bajaj / Almonard / Orient as approved by GE. 163 Each
88 85 S&F metal body louver shutter suitable to fit in exhaust fan of size 380mm sweep complete all as speciifed and directed by Engineer in Charge 163 Each
89 86 M & L for making hole at brick / stone masonry wall for fixing the Exhaust fan 380 mm sweep and making good the disturbed portion match with the existing surface 163 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail