}

Construction Of Primary Processing Centre On Rubber For Chesongkiri Ajirsong Rps At Vill Kuthepi Po Kollonga Dist Karbi Anglong Assam Pin 782485 , Group No . 27, Karbi Anglong-Assam

Assam Industrial Infrastructure Development Copr-AIIDC has published Construction Of Primary Processing Centre On Rubber For Chesongkiri Ajirsong Rps At Vill Kuthepi Po Kollonga Dist Karbi Anglong Assam Pin 782485 , Group No . 27. Submission Date for this Tender is 07-03-2020. Building Work Tenders in Karbi Anglong Assam. Bidders can get complete Tender details and download the document.




Tender Notice

23739796
Construction Of Primary Processing Centre On Rubber For Chesongkiri Ajirsong Rps At Vill Kuthepi Po Kollonga Dist Karbi Anglong Assam Pin 782485 , Group No . 27
Open Tender
Indian
Assam
Karbi Anglong
07-03-2020

Tender Details

Construction Of Primary Processing Centre On Rubber For Chesongkiri Ajirsong Rps At Vill Kuthepi Po Kollonga Dist Karbi Anglong Assam Pin 782485 , Group No . 27

Key Value

Document Fees
INR 700 /-
EMD
INR 69449.0 /-
Tender Value
INR 34.72 Lakhs /-

BOQ Items

Name of Work: Construction of Primary Processing Centre on Rubber for Chesongkiri Ajirsong RPS at Vill Kuthepi PO Kollonga Dist Karbi Anglong Assam Pin 782485, Group No.27
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CIVIL_WORKS: Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank, etc.including refilling (return filling) the quantity as necessary after completing of work, breaking clods in return filling, dressing, watering and ramming, etc. and removal of surplus earth with all lead and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. Upto a depth of 2.0m below the existing ground level. (a) In ordinary soil. item1 135 Cu.m
2 2 Earth / sand filling in plinth area not more than 150mm thick including necessary carriage, watering, ramming, etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. With hill sand obtained by truck carriage, loading and unloading and carriage to the site of work. item2 93.6 Cu.m
3 3 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works, etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately). In prop. 1 cement : 3 sand : 6 coarse aggregate by volume. item3 18.62 Cu.m
4 4 Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture including curing etc. complete as directed. item4 13.8 Sq.m
5 5 Providing and laying plain / reinforced cement concrete works cement with coarse sand and 20mm down graded stoneaggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using mixure machineIn Sub structure upto plinth level: M20 grade concrete or prop. 1:1.5:3 item5 56.9 Cu.m
6 6 Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping, etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work. item6 301 Sq.m
7 7 Providing soling in foundation and under floor with stone / best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling. item7 79.2 Sq.m
8 8 Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. In sub structure up to plinth level including dewatering if necessary. In proportion 1:4 item8 8.28 Cu.m
9 9 230 mm thick brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. In super structure above plinth level . In proportion 1:4 item9 130 Sqm
10 10 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately. 112mm thick brick wall. In cement morter in proportion 1:4 (1 cement :4 sand) item10 172 Sq.m
11 11 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. item11 198 Sq.m
12 12 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4 item12 153 Sq.m
13 13 Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface free from morter droppings and other foriegn matter and also including preparing the surface even and sand prepared smooth. item13 155 Sq.m
14 14 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. item14 155 Sq.m
15 15 Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. item15 288 Sq.m
16 16 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. item16 290.2 Sq.m
17 17 Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC work/RB walling including straightening, cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers, etc. complete upto 1st floor level.. TATA/ SAIL /Jindalsteel/Shyam steel/RINL. Super ductile (SD) TMT reinforcement bars item17 45.4 Qntl.
18 18 Providing, fitting, hoisting and fixing of roof trusses including purlins fabricated of M S black tubes conforming to relevant IS code, as per approved drawings and design including providing MS cleats, base plates, bolts and nuts and one coat of red oxide zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats, etc. for fixing ceiling joists as per design and drawings as directed. item18 26 QTL
19 19 Providing Pre painted galvanised Iron sheets roofing (PPGI) (Dyna Roof/ Sathyam/ Durakolor? Century Wells) at all levels including fitting and fixing ridging with self drilling, self tapping screws complete (Roof trusses and prulins etc. to be measured and paid separately). 0.60 mm thick. item19 177.6 Sq.m
20 20 Providing galvd. Iron ridging tata shaktee/ sail Including supplying and fixing necessary galvd. Screws, washer etc. complete as directed say - 0.60 mm thick- 230mm lapping item20 13 Rm
21 21 Providing, fitting and fixing steel windows/ventillators (openable) of standard rolled steel sections as per relevant IS Code - 1038 joints mitred and weilded with 15mm X 3MM X 100MM lugs embedded in cement concrete blocks of M- 10Grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide ) bolting device and stell handles, peg stays of 300mm long etc. complete as per rawing including applying a priming coat of red lead paint item21 5.5 Sq.m
22 22 Providing wood work in frame (Chowkaths) in doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with CC or brick masonary wall including supplying, fitting and fixing with MS flat hold fast (40mm x 3mm x 250mm) as per design and embedded in cement concrete block in prop 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with CC and masonary as directed and specified. (b) 1st class timber (Hollock/ Bonsum). item22 0.31 Cu.m
23 23 Providing and fixing factory made Santro or eqivalent Flush door shutters having core and crossbands fabricated from seasoned 1st class timber, 25mm core battens,2.5mm to 3.5mm uniformly thick cross bands, styles and rails made from hardwood timber of width not less than 50mm, fixed to the door frames with necessary hinges, screws, bolts etc.as specifird and directed at all levels.(Door fixtures and fittings to be measured and paid seperately). 35 mm thick item23 14.3 Sq.m
24 24 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. With ready mixed paint , Wood primer (pink) item24 16.2 Sq.m
25 25 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). item25 16.2 Sq.m
26 26 Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. item26 14.7 Sq.m
27 27 Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately). 5.00mm thick. item27 4 Sq.m
28 28 Providing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together trough their entire length & jointed together at the ends by endlocks mounted on specially design pipe shaft wih bracket plated, guide channels & arrangements for inside & outside locking with push pull operaion complete including cos of wires, spring and hood cover for shutters. item28 4.7 Sqm
29 29 Providing fitting, fixing MS Gate of 20 kg/m2 (Door with Grill) item29 2.88 Sqm
30 30 Providing polished ceramic wall tiles of approved quality (1 cement :3 coarse sand ) including cutting where necessary /pedelite/ Rouf / white cement slurry mixed with size, shape and thickness not less than 8mm on walls and skirings over Cement mortar bed 10mm thick in prop 1:3 normal range / Somanv/ Orient/ AssianMake II) of size 200mm x 300mm and above item30 27 Sq.M
31 31 Providing antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement 3 coarse sand) approved make fix with Fix-A-Tile (Choksey /Sika/ pedelite/Rouf) white cement complete at all levek as specified and directed. (A) CERAMIC 1) Normal range (Sizes 300mm x 300mm and above ) (a) Orient made ; Galaxy Brown,Galaxy crema, Galaxy pink Galaxy Green, pulsar Beige, pulsar Blue, pulsar Dove, pulsar pink, Brown, Burj Green Burj Slate item31 4.7 Sq.M
32 32 Providing fitting and fixing vitreous water closet squarting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required. (Flushing cistern to be paid seperately) Indian type W.C Orissa pattern of size 580 x 440 mma) White i) Jaquar make item32 2 Each
33 33 Providing fitting and fixing vitreous china flat black type lipped front urinal basin with standard flush pipe and Cpbrass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required (A) Jaquar make, white compact (Cat.No. URS-WHT-0702) item33 1 Each
34 34 Providing , fitting and fixing hard board sheet ceiling with approved quality with necessary nails, wood scrw including 1st class local wood 50mm X 12mm (holock/bonsum/sundi) beading including paint two coats to timber beads complete as directed (ceiling joist to be measured and paid separately). 6mm thick item34 33 Sq.M
35 35 Providing , fitting and fixing M.S grill of required pattern for windows/ clerestory windows/opening with MS flats at required spacing in frame all round, square or round M.S bars with round headed bolts and nuts or screw. Plain grill. Fixed to steel frames item35 375 Kg
36 36 Fire brick works in funace and tunnel Total less deduction item36 3.1 M3
37 37 Fabrication of furnance door with 3mm plate with frame item37 21.04 Kg
38 38 Supply and fitting CI Sheet (5mm thickness) in the furnace item38 87.92 kg
39 39 SS shutter plate 5mm thick item39 17.66 m
40 40 200mm dia AC pipe item40 1.25 m
41 41 Stainless steel mesh of size 30cm x 30cm item41 3 Nos
42 42 Laying fitting & fixing 110mm pvc pipe with all necessary fittings item42 16 m
43 43 Trolley 30x30x2mm sq. tube for 8 nos item43 397.82 kg
44 44 CI wheel 10 cm item44 32 Nos
45 45 Bamboo Baroties 25mm round item45 960 m
46 46 Providing and Erection of Bio Gas Plant of 15 Cubic Metre Capacity as per dseign and as directed by the Department item46 2 Job
47 47 Providing and Erection of Aeration Tank as per dseign and as directed by the Department item47 1 Job
48 48 Installation of Hand Tube Well, Construction of MS Stagging 3.00 m height with RCC foundation, one no. 1000 litre capacity PCVC tank including placing over the stagging, 1 HP Motor Pump set, pump shed, necessary pipe line, etc. as required complete as per drawing and specification and as directed. item48 1 job
49 49 ELECTRICAL WORKS: CIRCUIT WIRING: Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item49 80 RM
50 50 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item50 15 RM
51 51 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.- With 4 x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item51 15 Metre.
52 52 Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. item52 1 Each
53 53 Wiring to 5 Aa pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Long point up to 10.00 metre length. item53 1 Each
54 54 Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)- Long point up to 10.00 metre. Length. item54 2 Each
55 55 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Short point up to 3.00 metre. length. item55 4 Each
56 56 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Medium point up to 6.00 metre. Length. item56 5 Each
57 57 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Long point up to 10.00 metre. Length. item57 5 Each
58 58 MODULAR SWITCH: Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. : 1-2 module type Metal item58 6 Each
59 59 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 3 module type Metal item59 1 Each
60 60 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 4-5 module type Metal item60 3 Each
61 61 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 6-8 module type Metal item61 1 Each
62 62 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 1 module item62 3 Each
63 63 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 2 module item63 3 Each
64 64 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 3 module item64 1 Each
65 65 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 4 module item65 3 Each
66 66 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 8 module item66 1 Each
67 67 Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. item67 3 Each
68 68 Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item68 1 Each
69 69 Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item69 2 Each
70 70 Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item70 2 Each
71 71 Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item71 2 Each
72 72 Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item72 16 Each
73 73 Supplying with fitting fixing of polished brass bracket of 18 SWG , 25 cm long cast back plate and brass lamp holder complete including connection as per direction of department. item73 2 Each
74 74 MCB IN-comer TPN (Horizontal DB): Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. - ABB, Schneider MG, legrand, Hager make)- 4 way TPN (4+12) double door item74 1 Each
75 75 MCB, MCCB, RCCB, RCBO: Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series- (Schneider MG, legrand, Hager make)- 6 to 32A item75 12 Each
76 76 Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series (ABB, Schneider MG, legrand, Hager make)- 63A item76 1 Each
77 77 EARTHING: Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . item77 2 Each
78 78 Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. item78 2 Each
79 79 Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. item79 50 Metre.
80 80 Supplying & laying of 25 x 5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. item80 20 R.M.
81 81 FAN: Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make). Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make. [F] item81 1 Each
82 82 U. G. CABLE AND CABLE WORKS: Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).- 3 & 1/2 Core A2XFY- 25.00 Sq. mm 3 & 1/2 Core armoured U.G. cable item82 30 Metre
83 83 Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).- 3 & 1/2 Core A2XFY- 25.00 Sq. mm 3 & 1/2 Core U.G. cable in 40mm dia medium duty GI pipe. item83 5 Metre
84 84 CABLE KITS: Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 25-50 Sq.mm., 3/ 3.5/ 4 Core cable. item84 1 Set
85 85 Supplying, fitting fixing of LED Bulb non dimmable in the existing batten/angle holder as required and as directed by the department. (Jaquar or equilavent make). - Prima Series Bulb 9W. item85 2 Each
86 86 Supplying, fitting fixing of LED Batten Tubes high quality aluminium extruded with decorative end caps connection with 1.5 Sq.mm 1 core PVC insulated round copper conductor as required and as directed by the department.- BN021C LED 20 PSU CW GR S2 [TL] item86 12 Each
87 87 NON SCHEDULE ITEM: Supply, Fitting Fixing of Shock Treatment Chart item87 2 Each
88 88 CIVIL_WORKS: Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank, etc.including refilling (return filling) the quantity as necessary after completing of work, breaking clods in return filling, dressing, watering and ramming, etc. and removal of surplus earth with all lead and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. Upto a depth of 2.0m below the existing ground level. (a) In ordinary soil. item88 23.3 Cu.m
89 89 Earth / sand filling in plinth area not more than 150mm thick including necessary carriage, watering, ramming, etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. With hill sand obtained by truck carriage, loading and unloading and carriage to the site of work. item89 27.3 Cu.m
90 90 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works, etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately). In prop. 1 cement : 3 sand : 6 coarse aggregate by volume. item90 5.5 Cu.m
91 91 Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture including curing etc. complete as directed. item91 9.3 Sq.m
92 92 Providing and laying plain / reinforced cement concrete works cement with coarse sand and 20mm down graded stoneaggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using mixure machineIn Sub structure upto plinth level: M20 grade concrete or prop. 1:1.5:3 item92 15.1 Cu.m
93 93 Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping, etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work. item93 113.2 Sq.m
94 94 Providing soling in foundation and under floor with stone / best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling. item94 28 Sq.m
95 95 Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. In sub structure up to plinth level including dewatering if necessary. In proportion 1:4 item95 5.1 Cu.m
96 96 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately. 112mm thick brick wall. In cement morter in proportion 1:4 (1 cement :4 sand) item96 81 Sq.m
97 97 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. item97 45.4 Sq.m
98 98 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4 item98 8.23 Sq.m
99 99 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. item99 53.79 Sq.m
100 100 Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface free from morter droppings and other foriegn matter and also including preparing the surface even and sand prepared smooth. item100 109 Sq.m
101 101 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. item101 109 Sq.m
102 102 Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. item102 133.5 Sq.m
103 103 Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC work/RB walling including straightening, cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers, etc. complete upto 1st floor level.. TATA/ SAIL /Jindalsteel/Shyam steel/RINL. Super ductile (SD) TMT reinforcement bars item103 8.35 Qntl.
104 104 Providing, fitting, hoisting and fixing of roof trusses including purlins fabricated of M S black tubes conforming to relevant IS code, as per approved drawings and design including providing MS cleats, base plates, bolts and nuts and one coat of red oxide zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats, etc. for fixing ceiling joists as per design and drawings as directed. item104 9.4 QTL
105 105 Providing Pre painted galvanised Iron sheets roofing (PPGI) (Dyna Roof/ Sathyam/ Durakolor? Century Wells) at all levels including fitting and fixing ridging with self drilling, self tapping screws complete (Roof trusses and prulins etc. to be measured and paid separately). 0.60 mm thick. item105 82 Sq.m
106 106 Providing galvd. Iron ridging tata shaktee/ sail Including supplying and fixing necessary galvd. Screws, washer etc. complete as directed say - 0.60 mm thick- 230mm lapping item106 9 Rm
107 107 Providing wood work in frame (Chowkaths) in doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with CC or brick masonary wall including supplying, fitting and fixing with MS flat hold fast (40mm x 3mm x 250mm) as per design and embedded in cement concrete block in prop 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with CC and masonary as directed and specified. (b) 1st class timber (Hollock/ Bonsum). item107 0.05 Cu.m
108 108 Providing and fixing factory made Santro or eqivalent Flush door shutters having core and crossbands fabricated from seasoned 1st class timber, 25mm core battens,2.5mm to 3.5mm uniformly thick cross bands, styles and rails made from hardwood timber of width not less than 50mm, fixed to the door frames with necessary hinges, screws, bolts etc.as specifird and directed at all levels.(Door fixtures and fittings to be measured and paid seperately). 35 mm thick item108 3 Sq.m
109 109 Providing, fitting and fixing steel windows/ventillators (openable) of standard rolled steel sections as per relevant IS Code - 1038 joints mitred and weilded with 15mm X 3MM X 100MM lugs embedded in cement concrete blocks of M- 10Grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide ) bolting device and stell handles, peg stays of 300mm long etc. complete as per rawing including applying a priming coat of red lead paint item109 10.6 Sq.m
110 110 Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately). 5.00mm thick. item110 11 Sq.m
111 111 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. With ready mixed paint , Wood primer (pink) item111 4.2 Sq.m
112 112 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). item112 4.2 Sq.m
113 113 Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. item113 6.52 Sq.m
114 114 ELECTRICAL WORKS: CIRCUIT WIRING: Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. item114 10 RM
115 115 Wiring to 5 Aa pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Long point up to 10.00 metre length. item115 1 Each
116 116 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Short point up to 3.00 metre. length. item116 3 Each
117 117 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Medium point up to 6.00 metre. Length. item117 4 Each
118 118 Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Long point up to 10.00 metre. Length. item118 5 Each
119 119 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 3 module type Metal item119 1 Each
120 120 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 12-16 module type Metal item120 2 Each
121 121 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 3 module item121 1 Each
122 122 Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 16 module item122 2 Each
123 123 Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. item123 2 Each
124 124 Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item124 6 Each
125 125 Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item125 1 Each
126 126 Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. item126 13 Each
127 127 Supplying and fixing of fan box (AKG or equilavent as approved by the department) with inbuilt rod as required. item127 6 Each
128 128 MCB IN-comer SPN DB: Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. - ABB, Schneider MG, legrand, Hager make)- 12 way SPN double door item128 1 Each
129 129 MCB, MCCB, RCCB, RCBO: Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series- (Schneider MG, legrand, Hager make)- 6 to 32A item129 8 Each
130 130 MCB, MCCB, RCCB, RCBO: Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series- (ABB, Schneider MG, legrand, Hager make)- 6 to 32A item130 1 Each
131 131 EARTHING: Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . item131 1 Each
132 132 Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. item132 1 Each
133 133 Supplying & laying of 25 x 5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. item133 10 R.M.
134 134 FAN: Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make). Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make. [F] item134 6 Each
135 135 U. G. CABLE AND CABLE WORKS: Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).- 3 Core A2XFY- 6.00 Sq. mm 3 Core armoured U.G. cable item135 12 Metre
136 136 Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).- Core 3 A2XFY- 6.00 Sq. mm 3 Core U.G. cable in 32mm dia medium duty GI pipe. item136 3 Metre
137 137 Supplying, fitting fixing of LED Batten Tubes high quality aluminium extruded with decorative end caps connection with 1.5 Sq.mm 1 core PVC insulated round copper conductor as required and as directed by the department.- BN021C LED 20 PSU CW GR S2 [TL] item137 6 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail