Assam Industrial Infrastructure Development Copr-AIIDC has published Construction Of Primary Processing Centre On Turmeric For Abad Agro Producer Company Ltd At Vill Doulchuba Sub Division Bhergaon Udalguri Btad Assam Pin 784522 Group No 19. Submission Date for this Tender is 07-03-2020. Building Work Tenders in Doulchuba Udalguri Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Primary Processing Centre on Turmeric for Abad Agro Producer Company Ltd., at Vill- Doulchuba, Sub Division- Bhergaon, Udalguri (BTAD), Assam, Pin-784522, Group No.19 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL_WORKS: Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank, etc.including refilling (return filling) the quantity as necessary after completing of work, breaking clods in return filling, dressing, watering and ramming, etc. and removal of surplus earth with all lead and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. Upto a depth of 2.0m below the existing ground level. (a) In ordinary soil. | item1 | 235 | Cu.m |
| 2 | 2 | Earth / sand filling in plinth area not more than 150mm thick including necessary carriage, watering, ramming, etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. With hill sand obtained by truck carriage, loading and unloading and carriage to the site of work. | item2 | 129 | Cu.m |
| 3 | 3 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works, etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately). In prop. 1 cement : 3 sand : 6 coarse aggregate by volume. | item3 | 26.91 | Cu.m |
| 4 | 4 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacture including curing etc. complete as directed. | item4 | 15 | Sq.m |
| 5 | 5 | Providing and laying plain / reinforced cement concrete works cement with coarse sand and 20mm down graded stoneaggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). Using mixure machineIn Sub structure upto plinth level: M20 grade concrete or prop. 1:1.5:3 | item5 | 71.59 | Cu.m |
| 6 | 6 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping, etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work. | item6 | 625.41 | Sq.m |
| 7 | 7 | Providing soling in foundation and under floor with stone / best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling. | item7 | 351 | Sq.m |
| 8 | 8 | Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. In sub structure up to plinth level including dewatering if necessary. In proportion 1:4 | item8 | 20.36 | Cu.m |
| 9 | 9 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately. 112mm thick brick wall. In cement morter in proportion 1:4 (1 cement :4 sand) | item9 | 376.16 | Sq.m |
| 10 | 10 | Providing ceramic tiles of approved quality size, shape and thickness not less than 6mm of NITCO brand on floors, wall, skirtings. risers and tread of steps over cement morter 15mm thick in prop. 1:3 (1 cement : 3 coarse sand) finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ BalEndura, white cement slurry mixed with approved pigment to match shade of tiles complete at all levels complete as specified and directed.(Cement plastering will be measured and paid seperately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).- Deluxe range (sizes 600mm x 600mm and above)- Somany/Orient/Nitco/Quotone make | item10 | 219.68 | Sq.m |
| 11 | 11 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. | item11 | 610.08 | Sq.m |
| 12 | 12 | Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface free from morter droppings and other foriegn matter and also including preparing the surface even and sand prepared smooth. | item12 | 407 | Sq.m |
| 13 | 13 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | item13 | 407 | Sq.m |
| 14 | 14 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick | item14 | 367 | Sq.m. |
| 15 | 15 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture(Asian paints/Berger paint/ICI paint/ J & N paint/Nerolac) on new surface to give an even shade after throughly brushing the surface free from mortar drooping and other foreign matter and sand papered smooth. | item15 | 367 | Sq.m. |
| 16 | 16 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC work/RB walling including straightening, cleaning, cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers, etc. complete upto 1st floor level.. TATA/ SAIL /Jindalsteel/Shyam steel/RINL. Super ductile (SD) TMT reinforcement bars | item16 | 83.82 | Qntl. |
| 17 | 17 | Pre construction anti-termite treatment in the back fill in immediate contact with the foundation structureafter completion, column wall etc.to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with structure well treated-with chemical (supplying of necessary tools and accessiories by the contractor) as per the direction of department complete. | item17 | 324 | Sq.m |
| 18 | 18 | Pre construction anti-termite treatment - applying in the entire levelled area after plinth filling and before laying floor, tricel solution @ 5 litres per square metre of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessiories by the contractor) as per direction of the Department complete. | item18 | 215 | Sq.m |
| 19 | 19 | Providing, fitting, hoisting and fixing of roof trusses including purlins fabricated of M S black tubes conforming to relevant IS code, as per approved drawings and design including providing MS cleats, base plates, bolts and nuts and one coat of red oxide zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats, etc. for fixing ceiling joists as per design and drawings as directed. | item19 | 65.05 | QTL |
| 20 | 20 | Providing Pre painted galvanised Iron sheets roofing (PPGI) (Dyna Roof/ Sathyam/ Durakolor? Century Wells) at all levels including fitting and fixing ridging with self drilling, self tapping screws complete (Roof trusses and prulins etc. to be measured and paid separately). 0.60 mm thick. | item20 | 279 | Sq.m |
| 21 | 21 | Providing galvd. Iron ridging tata shaktee/ sail Including supplying and fixing necessary galvd. Screws, washer etc. complete as directed say - 0.60 mm thick- 230mm lapping | item21 | 20.2 | Rm |
| 22 | 22 | Providing plinth protection with bricks flats laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | item22 | 47.3 | Sq.m |
| 23 | 23 | Providing drain with cement concrete (1:3:6) 100mm thick sides 100mm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shutterinng for sides and earthwork in excavation of foundation trenches and refil;ling the sides after completion of work etc. as specified. - 300mm wide and average 150mm deep with bed slope 1 jn 150 with initial depth of 100mm | item23 | 81.23 | Rm |
| 24 | 24 | Providing wood work in frame (Chowkaths) in doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with CC or brick masonary wall including supplying, fitting and fixing with MS flat hold fast (40mm x 3mm x 250mm) as per design and embedded in cement concrete block in prop 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with CC and masonary as directed and specified. (b) 1st class timber (Hollock/ Bonsum). | item24 | 0.6 | Cu.m |
| 25 | 25 | Providing and fixing factory made Santro or eqivalent Flush door shutters having core and crossbands fabricated from seasoned 1st class timber, 25mm core battens,2.5mm to 3.5mm uniformly thick cross bands, styles and rails made from hardwood timber of width not less than 50mm, fixed to the door frames with necessary hinges, screws, bolts etc.as specifird and directed at all levels.(Door fixtures and fittings to be measured and paid seperately). 35 mm thick | item25 | 36.72 | Sq.m |
| 26 | 26 | Providing, fitting, and fixing anodised aluminium sliding windows and ventilators of standard section of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other quivalent primary producer) without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat,rubber gasket, roller, bolting device, looking arrangements, screws etc. as required complete as specified and directed for all levels. (a) 2 track sliding window (iv) 5mm clear glass | item26 | 26.46 | Sqm |
| 27 | 27 | Providing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together trough their entire length & jointed together at the ends by endlocks mounted on specially design pipe shaft wih bracket plated, guide channels & arrangements for inside & outside locking with push pull operaion complete including cos of wires, spring and hood cover for shutters. | item27 | 6.26 | Sqm |
| 28 | 28 | Ceiling with Exposed Metal (G.I) Frame Work with E-Grid - 2430- Providing and fixing in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm X 600mm / 1200mm X 600MM with main runner 38 X 24mm, cross tee 29 X 24mm & wall angle 24 X 24mm. Using 4mm / 6MM thick high Pressure Steam Cured Non Asbestos Fibre Cement Board as per ISI 14862, to be placed in a grid of GI system duly suspended with 4mm / 6mm dia G.I / M.S bar hanger fixed with steel dash fastner or iron purlin from the roof with adjustment clip providing positions for light fistures, air conditions diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum C/C. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners@ 610mm C/C, so as to form 600mm X 600mm / 1200MM X 600MM grid, all complete as per the drawing & direction of engineer in charge. Finally, if specified boards are to br painted with 2 coats of acrylic emulsion paint of approved shad / make over a coat of cement primer before installing it on the grid. (I) Using 4mm thick FC Board | item28 | 215 | Sq.m |
| 29 | 29 | Installation of Hand Tube Well, Construction of MS Stagging 3.00 m height with RCC foundation, one no. 1000 litre capacity PCVC tank including placing over the stagging, 1 HP Motor Pump set, pump shed, necessary pipe line, etc. as required complete as per drawing and specification and as directed. | item29 | 1 | job |
| 30 | 30 | Construction of Effluent Treatment Plant as required complete as per drawing and specification and as directed. | item30 | 1 | job |
| 31 | 31 | ELECTRICAL WORKS: CIRCUIT WIRING: Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item31 | 140 | RM |
| 32 | 32 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item32 | 35 | RM |
| 33 | 33 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.- With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item33 | 30 | RM |
| 34 | 34 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.- With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item34 | 20 | Metre. |
| 35 | 35 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.- With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item35 | 20 | Metre. |
| 36 | 36 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | item36 | 1 | Each |
| 37 | 37 | Wiring to 5 Aa pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Medium point up to 6.00 metre length. | item37 | 3 | Each |
| 38 | 38 | Wiring to 5 Aa pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Long point up to 10.00 metre length. | item38 | 3 | Each |
| 39 | 39 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)- Long point up to 10.00 metre. Length. | item39 | 4 | Each |
| 40 | 40 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Short point up to 3.00 metre. length. | item40 | 10 | Each |
| 41 | 41 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Medium point up to 6.00 metre. Length. | item41 | 11 | Each |
| 42 | 42 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete- Long point up to 10.00 metre. Length. | item42 | 10 | Each |
| 43 | 43 | MODULAR SWITCH: Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. : 1-2 module type Metal | item43 | 10 | Each |
| 44 | 44 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 3 module type Metal | item44 | 5 | Each |
| 45 | 45 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 4-5 module type Metal | item45 | 5 | Each |
| 46 | 46 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.: 6-8 module type Metal | item46 | 4 | Each |
| 47 | 47 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 1 module | item47 | 2 | Each |
| 48 | 48 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 2 module | item48 | 8 | Each |
| 49 | 49 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 3 module | item49 | 5 | Each |
| 50 | 50 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 4 module | item50 | 5 | Each |
| 51 | 51 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 6 module | item51 | 3 | Each |
| 52 | 52 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.- 8 module | item52 | 1 | Each |
| 53 | 53 | Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. | item53 | 5 | Each |
| 54 | 54 | Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item54 | 1 | Each |
| 55 | 55 | Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item55 | 4 | Each |
| 56 | 56 | Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item56 | 7 | Each |
| 57 | 57 | Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item57 | 4 | Each |
| 58 | 58 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. | item58 | 42 | Each |
| 59 | 59 | SWITCH GEAR & PROTECTION: Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt.- ABB, Schneider MG, legrand, Hager make)- 20A Capacity. | item59 | 2 | Each |
| 60 | 60 | MCB IN-comer SPN DB: Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. - ABB, Schneider MG, legrand, Hager make)- 12 way SPN double door | item60 | 1 | Each |
| 61 | 61 | MCB IN-comer TPN (Horizontal DB): Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. - ABB, Schneider MG, legrand, Hager make)- 4 way TPN (4+12) double door | item61 | 1 | Each |
| 62 | 62 | MCB, MCCB, RCCB, RCBO: Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series- (Schneider MG, legrand, Hager make)- 6 to 32A | item62 | 20 | Each |
| 63 | 63 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series- (ABB, Schneider MG, legrand, Hager make)- 40A | item63 | 1 | Each |
| 64 | 64 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.- C Series (ABB, Schneider MG, legrand, Hager make)- 63A | item64 | 1 | Each |
| 65 | 65 | EARTHING: Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item65 | 2 | Each |
| 66 | 66 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item66 | 2 | Each |
| 67 | 67 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item67 | 45 | Metre. |
| 68 | 68 | Supplying & laying of 25 x 5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item68 | 25 | R.M. |
| 69 | 69 | FAN: Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make). Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make. [F] | item69 | 1 | Each |
| 70 | 70 | U. G. CABLE AND CABLE WORKS: Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).- 3 & 1/2 Core A2XFY- 185.00 Sq. mm 3 & 1/2 Core armoured U.G. cable | item70 | 35 | Metre |
| 71 | 71 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)- Core - 3 & 1/2 A2XWY A2XFY- 185.00 Sq.mm 3&1/2 Core U.G. cable in 80 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) | item71 | 5 | Metre |
| 72 | 72 | CABLE KITS: Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 185-300 Sq.mm., 3/ 3.5/ 4 Core cable. | item72 | 1 | Set |
| 73 | 73 | Supplying including installation of cast iron cable marker as specified and directed by the deptt. | item73 | 20 | Each |
| 74 | 74 | OVER HEAD LINE: Supplying and fitting fixing of H.T./L.T. danger plate complete as required and as directed by the department. | item74 | 2 | Each |
| 75 | 75 | Supplying, fitting fixing of LED Batten Tubes high quality aluminium extruded with decorative end caps connection with 1.5 Sq.mm 1 core PVC insulated round copper conductor as required and as directed by the department.- B118601000 [FL] | item75 | 3 | Each |
| 76 | 76 | Supplying, fitting fixing of LED Batten Tubes high quality aluminium extruded with decorative end caps connection with 1.5 Sq.mm 1 core PVC insulated round copper conductor as required and as directed by the department.- BN021C LED 20 PSU CW GR S2 [TL] | item76 | 27 | Each |
| 77 | 77 | NON-SCHEDULE ITEM: LT PANEL: Supplying and installation of metal enclosed wall/floor mounted front operated cubical type switch gear panel suitable for indoor installation conforming to IS: 8623 (Part I & II). Panel should be made of sheet steel and thickness not less than 2mm and structural steel having light section. The panel shall be completely dust tight and vermin proof and shall be painted with anti corrosive and anti condensation type two coats of primer and two coats of paint. All wiring shall be PVC insulated and PVC sheathed of 1100 volt grade of required size. The panel should have provision of entry of cable at the bottom and also provision of out going feeders from the bottom of the panel. The panel shall be incorporated with double busbar system. The bus bar shall be of high quality copper of uniform cross section. The panel shall consist of the following items (viz. Voltmeter, Ammeter, CT, indicating lamps, selector switch etc.) connected as per drawing and shall be flush mounted on the front of the panel.- Incommer: - 250A 4P 36 KA MCCB - 1 No. - Bus-Bars: 480 A TPN Electrolytic Copper Bus Bar of Size (30mmX10mm) – 1 set- Digital Panel Mounted Energy (Kwh) Meter- 1No.- Digital Panel mounted Voltmeter - 1 No. - Digital panel mounted Ammeter - 1 No. - Voltmeter Selector Switch - 1 No. - Ammeter Selector Switch - 1 No. - Indicating Lamps - 3 Nos. - CT - 3 Nos. - Fuse holders & Fuse bases suitable for Cylindrical / DIN fuse-links and Fuse - 6 Nos. - Outgoing:- 160 A 4P MCB - 1 No.- 63 A 4P MCB - 2 Nos.- 40 A DP MCB - 3 Nos. - 32 A DP MCB - 3 Nos. | item77 | 1 | Set |
| 78 | 78 | Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade | item78 | 2 | Sq.m |
| 79 | 79 | Supply, Fitting Fixing of Shock Treatment Chart | item79 | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
