}

Addition And Alteration In Room No . 121/Block-Iv And 126/Block-V At Nsut Campus . , ROOM NO 301 ADMN BLOCK NSUT SECTOR 3 DWARKA ND-Delhi

Netaji Subhas Institute Of Technology-NSIT has published Addition And Alteration In Room No . 121/Block-Iv And 126/Block-V At Nsut Campus . . Submission Date for this Tender is 27-02-2020. Building Work Tenders in ROOM NO 301 ADMN BLOCK NSUT SECTOR 3 DWARKA ND Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

23716103
Addition And Alteration In Room No . 121/Block-Iv And 126/Block-V At Nsut Campus .
Open Tender
Indian
Delhi
ROOM NO 301 ADMN BLOCK NSUT SECTOR 3 DWARKA ND
27-02-2020

Tender Details

Addition And Alteration In Room No . 121/Block-Iv And 126/Block-V At Nsut Campus .

Key Value

Document Fees
Refer document
EMD
INR 6888.0 /-
Tender Value
INR 3.44 Lakhs /-

BOQ Items

Name of work: Addition and Alteration in Room No. 121/Block-IV and 126/Block-V at NSUT Campus
Sl. No. Item Description Item Code / Make Quantity Units
1 1 1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.\nFixed to openings /wooden frames with rawl plugs screws etc\n 49 KG
2 2 2 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 8 SQM
3 3 3 Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :\nOrdinary cement without any pigment\n 2 SQM
4 4 4 12 mm cement plaster of mix :\n1:6 (1 cement: 6 fine sand)\n 2 SQM
5 5 5 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 2.5 SQM
6 6 6 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.\nTwo or more coats on new work\n 287 SQM
7 7 7 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :\nWater thinnable cement primer\n 287 SQM
8 8 8 Applying priming coat:\nWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works\n 10 SQM
9 9 9 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\nTwo or more coats on new work\n 10 SQM
10 10 10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 287 SQM
11 11 11 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 287 SQM
12 12 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\nOne or more coats on old work\n 16 SQM
13 13 13 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 1 CUM
14 14 14 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.\nIn cement mortar\n 9 CUM
15 15 15 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below\n\n 2 EACH
16 16 16 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 11 CUM
17 17 17 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\na) For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron\n 215 KG
18 18 b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision B115for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPowder coated aluminium (minimum thickness of powder coating 50 micron\n 32 KG
19 19 18 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Gradel Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side 15 SQM
20 20 19 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)\n 5 SQM
21 21 20 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.\na) With stainless steel cover plate minimum 1.25 mm thickness\n 2 EACH
22 22 21 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 2 EACH
23 23 22 Providing and fixing powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 34 KG
24 24 23 Providing and fixing D type aluminium handle size 200mm long with SS screws etc. complete as per directions of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron). 4 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail