}

Construction Of Toilet Block At Baithangbari Eng Med School Kalacherra Construction, KALACHERRA DHARMANAGAR-Tripura

Rural Development Department has published Construction Of Toilet Block At Baithangbari Eng Med School Kalacherra Construction. Submission Date for this Tender is 27-02-2020. Toilet Bathroom Tenders in KALACHERRA DHARMANAGAR Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

23635944
Construction Of Toilet Block At Baithangbari Eng Med School Kalacherra Construction
Open Tender
Indian
Tripura
KALACHERRA DHARMANAGAR
27-02-2020

Tender Details

Construction Of Toilet Block At Baithangbari Eng Med School Kalacherra Construction

Key Value

Document Fees
INR 1000 /-
EMD
INR 4290.0 /-
Tender Value
INR 4.29 Lakhs /-

BOQ Items

Name of the work: Construction of toilet block at Baithangbari English Medium school under R.D. Kalacherra Sub - Division during the year 2019-20.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\nAll kinds of soil BI01010001010000000000000515BI0100001113 23.9825 Cum
2 2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. BI01010001010000000000000515BI0100001114 17.071 Cum
3 3 Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. BI01010001010000000000000515BI0100001115 3.30044 Cum
4 4 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work Upto plinth level:\n1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt aggregate 40 mm nominal size) BI01010001010000000000000515BI0100001116 3.21594 Cum
5 5 Centering shuttering including struttings, propping etc. and removal of form work for:\nFoundations, footings, bases for columns etc. for mass concrete with timber plank BI01010001010000000000000515BI0100001117 10.8 Sqm
6 6 Centering shuttering including struttings, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply BI01010001010000000000000515BI0100001118 26.1725 Sqm
7 7 Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank. BI01010001010000000000000515BI0100001119 28.0175 Sqm
8 8 Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank BI01010001010000000000000515BI0100001120 16.5 Sqm
9 9 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-\n-All work upto plinth level:\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) BI01010001010000000000000515BI0100001121 2.3625 Cum
10 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing andreinforcement-\nRCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas.\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) BI01010001010000000000000515BI0100001122 2.77425 Cum
11 11 RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase.\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) BI01010001010000000000000515BI0100001123 2.52062 Cum
12 12 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement\nIn plinth and skirting courses, fillets, columns, pillars,posts and struts \n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) BI01010001010000000000000515BI0100001124 1.003 Cum
13 13 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.\nThermo-Mechanically Treated bars/ Cold twisted deformed steel bars BI01010001010000000000000515BI0100001125 1109.95 Kg
14 14 First class brick work in foundation and plinth including cost of all materials as required complete.\nIn cement mortar 1:6 ( 1 cement : 6 fine sand ). BI01010001010000000000000515BI0100001126 7.69 Cum
15 15 Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-\nIn cement mortar 1:4 ( 1 cement : 4 fine sand ). BI01010001010000000000000515BI0100001127 44.019 Sqm.
16 16 Honey comb brick masonry work of half brick thickness with first class bricks in superstructure for all level including cost of all materials as required complete:-\n In cement morter 1:2 (1cement:2river sand) BI01010001010000000000000515BI0100001128 5.3694 Sqm.
17 17 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-In Charge.\nExtruded section Profile size 48x40 mm. BI01010001010000000000000515BI0100001129 19.8 Sqm.
18 18 Providing and fixing to existing door frames. \n24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised /plastic brackets of size 75×220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserying galvanised MS tube of size 20×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC hollow section of size 100×24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic /galvanised MS "U" cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). BI01010001010000000000000515BI0100001130 6.3 Sqm.
19 19 Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete\n40 mm thick with 20 mm well burnt brick aggregate. BI01010001010000000000000515BI0100001131 4.6225 Sqm.
20 20 Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.\nCeramic glazed tiles 1st quality 300x300 mm in all shades and designs. BI01010001010000000000000515BI0100001132 4.6225 Sqm.
21 21 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001133 14.2 Sqm.
22 22 12 mm cement plaster of mix\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) BI01010001010000000000000515BI0100001134 51.7563 Sqm.
23 23 15 mm cement plaster on the rough side of single or half brick wall of mix:\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) BI01010001010000000000000515BI0100001135 83.7938 Sqm
24 24 Neat cement punning BI01010001010000000000000515BI0100001136 39.55 Sqm.
25 25 6 mm cement plaster of mix BI01010001010000000000000515BI0100001137 74.6425 Sqm.
26 26 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. BI01010001010000000000000515BI0100001138 43.355 Sqm.
27 27 Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] BI01010001010000000000000515BI0100001139 43.355 sqm
28 28 Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] BI01010001010000000000000515BI0100001140 103.45 sqm
29 29 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :\nWhite Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. BI01010001010000000000000515BI0100001141 2 No
30 30 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid BI01010001010000000000000515BI0100001142 2 No
31 31 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. BI01010001010000000000000515BI0100001143 2 No
32 32 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:\nFlat back wash basin of size 550x400mm. BI01010001010000000000000515BI0100001144 2 No
33 33 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe\n32 mm dia BI01010001010000000000000515BI0100001145 1 M
34 34 Flexible Pipe\n32 mm Dia BI01010001010000000000000515BI0100001146 1 M
35 35 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. BI01010001010000000000000515BI0100001147 2 No
36 36 Providing and fixing soil, waste and vent pipes:\n100 mm dia.\nSand cast iron S&S pipe as per IS: 1729. BI01010001010000000000000515BI0100001148 5 M
37 37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :\nFor 100 mm dia. Pipe BI01010001010000000000000515BI0100001149 5 No
38 38 Providing and fixing heel rest sanitary bend\n100 mm dia\nSand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001150 2 No
39 39 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.\n100x100x100 mm\nSand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001151 3 No
40 40 Providing and fixing collar:\n100x100x100 mm\nSand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001152 2 No
41 41 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. - Internal work- Exposed on wall\n15 mm dia. nominal bore BI01010001010000000000000515BI0100001153 35 M
42 42 25 mm dia. nominal bore BI01010001010000000000000515BI0100001154 40 M
43 43 32 mm dia. nominal bore BI01010001010000000000000515BI0100001155 10 M
44 44 Providing and fixing brass bib cock of approved quality :\n15 mm dia. nominal bore BI01010001010000000000000515BI0100001156 6 No
45 45 Providing and fixing brass stop cock of approved quality :\n15 mm dia. nominal bore BI01010001010000000000000515BI0100001157 6 No
46 46 Providing and fixing ball valve (brass) of approved\nquality complete :\n25 mm dia. nominal bore BI01010001010000000000000515BI0100001158 2 No
47 47 Providing and fixing gun metal non-return valve of approved quality (screwed end):\n25 mm dia. nominal bore\nVertical BI01010001010000000000000515BI0100001159 1 No
48 48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank BI01010001010000000000000515BI0100001160 1000 No
49 49 Providing and installing 1.0 HP Monoblock alongwith starter i/c all auxialiries.\n100 mm Diameter BI01010001010000000000000515BI0100001161 1 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail