}

Bso Engg Development Of A Site Retail Outlet With Facilities Like Tanks And Pumps Sales Building Canopy Driveway And Other Allied Civil Mechanical And Electrical Works At Location 5 Kms From Jorethang Town On Jorethang-Melli State Highway District S, Jorethang-Melli State Highway-Sikkim

Indian Oil Corporation Limited-IOCL has published Bso Engg Development Of A Site Retail Outlet With Facilities Like Tanks And Pumps Sales Building Canopy Driveway And Other Allied Civil Mechanical And Electrical Works At Location 5 Kms From Jorethang Town On Jorethang-Melli State Highway District S. Submission Date for this Tender is 26-02-2020. Electromechanical Work Tenders in Jorethang-Melli State Highway Sikkim. Bidders can get complete Tender details and download the document.




Tender Notice

23628486
Bso Engg Development Of A Site Retail Outlet With Facilities Like Tanks And Pumps Sales Building Canopy Driveway And Other Allied Civil Mechanical And Electrical Works At Location 5 Kms From Jorethang Town On Jorethang-Melli State Highway District S
Open Tender
Indian
Sikkim
Jorethang-Melli State Highway
26-02-2020

Tender Details

Bso Engg Development Of A Site Retail Outlet With Facilities Like Tanks And Pumps Sales Building Canopy Driveway And Other Allied Civil Mechanical And Electrical Works At Location 5 Kms From Jorethang Town On Jorethang-Melli State Highway District S

Key Value

Document Fees
Refer document
EMD
INR 139000.0 /-
Tender Value
INR 1.38 Crore /-

BOQ Items

Name of Work: DEVELOPMENT OF NEW A SITE RO AT JORETHANG TO MELLI,SIKKIM UNDER SILIGURI DO
Sl. No. Item Description Item Code / Make Qty Units
1 1 i) All kinds of Soil ITEM CODE 2 100 M3
2 2 iv) Hard Rock(Blasting Prohibited) chiesel/pneumatic drilling ITEM CODE 3 60 M3
3 3 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil ITEM CODE 4 20 M3
4 4 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in ordinary or hard rock ITEM CODE 5 10 M3
5 5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m ITEM CODE 6 80 M3
6 6 Supply & filling of local earth (including royalty) by mechanical transport also including ramming & watering of the earth in layers not exceeding 20cm in depth in plot, trenches, plinth, sides of foundations etc. complete ITEM CODE 7 25 M3
7 7 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. ITEM CODE 8
8 8 i) Local Fine Sand within grading zone IV ITEM CODE 9 80 M3
9 9 ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm) ITEM CODE 10 5 M3
10 10 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) ITEM CODE 11 40 M3
11 11 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) ITEM CODE 12 10 M3
12 12 ii) PCC 1 Cement:1½ Coarse Sand:3 Graded Stone Aggregate 20mm ITEM CODE 13 25 M3
13 13 iii) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 20mm ITEM CODE 14 20 M3
14 14 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil ITEM CODE 15 9 M2
15 15 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ITEM CODE 16
16 16 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm ITEM CODE 17 35 M3
17 17 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : ITEM CODE 18
18 18 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm ITEM CODE 19 15 M3
19 19 Centering and shuttering including strutting, propping etc. and removal of form for : ITEM CODE 20
20 20 i) Foundations,footings,bases of columns, etc. for mass concrete ITEM CODE 21 65 M2
21 21 ii) Walls (any thickness) including attached pilasters, buttress, plinth and string courses etc. ITEM CODE 22 50 M2
22 22 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) ITEM CODE 23 100 M2
23 23 iv) Lintels, beams plinth beams,girders bressumers and cantilevers ITEM CODE 24 120 M2
24 24 v) Columns, Pillars, Piers, Abutments, Posts and Struts. ITEM CODE 25 90 M2
25 25 vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards ITEM CODE 26 10 M2
26 26 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels ITEM CODE 27
27 27 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 ITEM CODE 28 5000 KG
28 28 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth ITEM CODE 29
29 29 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH ITEM CODE 30 12 M3
30 30 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL ITEM CODE 31 8 M3
31 31 x) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement:4 coarse sand in superstructure ABOVE PLINTH level & UP TO FLOOR V LEVEL ITEM CODE 32 40 M2
32 32 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks ITEM CODE 33 100 M2
33 33 Providing and laying random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level & the like ITEM CODE 34
34 34 i) RR masonry in Cement mortar 1:6 (1 cement : 6 coarse sand) ITEM CODE 35 8 M3
35 35 iv) Granite of any colour and shade having Area of slab over 0.50 sqm ITEM CODE 36 3 M2
36 36 Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete. ITEM CODE 37 80 KG
37 37 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. ITEM CODE 38 2 EA
38 38 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62mm width and 32mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. ITEM CODE 39 10 M
39 39 Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge ITEM CODE 40
40 40 ii) Decorative finish (both side wood grained finish) ITEM CODE 41 3 M2
41 41 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) ITEM CODE 42
42 42 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections ITEM CODE 43 80 KG
43 43 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): ITEM CODE 44
44 44 i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) ITEM CODE 45 5 M2
45 45 iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm) ITEM CODE 46 12 M2
46 46 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. ITEM CODE 47
47 47 i) With stainless steel cover plate ITEM CODE 48 2 EA
48 48 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). ITEM CODE 49 4 M2
49 49 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ITEM CODE 50 10000 KG
50 50 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover ITEM CODE 51 18 M2
51 51 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in- charge.(area of grill to be measured). ITEM CODE 52 5 M2
52 52 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. ITEM CODE 53 10 M2
53 53 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement ITEM CODE 54 13 M2
54 54 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. ITEM CODE 55 13 M2
55 55 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. ITEM CODE 56 9 M2
56 56 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified ITEM CODE 57
57 57 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 ITEM CODE 58 10 M2
58 58 Providing and fixing  Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. ITEM CODE 59
59 59 i) Profile Sheet for roofing ITEM CODE 60 145 M2
60 60 iii) Plain sheet for Flashings/ Aprons (Upto 600 mm) ITEM CODE 61 44 M
61 61 ii) 110 mm diameter ITEM CODE 62 40 M
62 62 iii) 160 mm diameter PVC Rain water pipe ITEM CODE 63 16 M
63 63 Providing and fixing  150F/200F flush panel,(pre-coated steel) False Ceiling made of  Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa and 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continues coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of  thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure. ITEM CODE 64 145 M2
64 64 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) ITEM CODE 65 200 M2
65 65 v) 20mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) ITEM CODE 66 50 M2
66 66 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) ITEM CODE 67 70 M2
67 67 Providing Neat cement punning ITEM CODE 68 150 M2
68 68 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete ITEM CODE 69 200 M2
69 69 Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm) ITEM CODE 70 150 M2
70 70 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats ITEM CODE 71 100 M2
71 71 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. ITEM CODE 72 250 M2
72 72 Painting with aluminium paint of approved brand and manufacture to give an even shade with 2 or more coats ITEM CODE 73 50 M2
73 73 Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge. ITEM CODE 74
74 74 i) 1:3:6 or richer mix (i/c equivalent design mix) ITEM CODE 75 2 M3
75 75 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge ITEM CODE 76 2 M3
76 76 Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge ITEM CODE 77 2 M3
77 77 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired ITEM CODE 78 300 M3
78 78 Supply and laying of water bound macadam of 100 mm consolidated thickness for subbase with 90 to 45 mm stone aggregate,11.2mm size screenings, chippings of stone and murrum spreading, watering and consolidating in camber with power roller complete as/specifications. ITEM CODE 79 640 M2
79 79 Supply and laying of water bound macadam in layers, each of 75 mm thick (consolidated) with 63 mm to 45 mm stone aggregate. Each layer shall be consolidated by power roller after watering, spreading chippings of stone and murrum complete as per specifications. Item includes supply of murrum 6 mm thick, watering and rolling with power roller complete with preparation of surface. Rate per Layer ITEM CODE 80 1280 M2
80 80 Providing & laying factory made Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih strong vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881 maximum dimensional deviations of +/- 3mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. ITEM CODE 81
81 81 ii) M40 grade 80 mm thick Plain finish ITEM CODE 82 640 M2
82 82 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast C.C. kerb stone shall be approved by Engineer-in-charge. ITEM CODE 83 6 M3
83 83 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. ITEM CODE 84 1 EA
84 84 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: ITEM CODE 85
85 85 i) W.C. pan with ISI marked white solid plastic seat and lid ITEM CODE 86 1 EA
86 86 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern ITEM CODE 87 1 EA
87 87 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : ITEM CODE 88
88 88 ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap ITEM CODE 89 2 EA
89 89 Providing and fixing 100 mm sand cast Iron grating for gully trap. ITEM CODE 90 2 EA
90 90 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ITEM CODE 91 2 EA
91 91 vii) 40mm dia HDPE pipe for borewell upto a depth of 65m ITEM CODE 92 200 M
92 92 iii) 25 mm nominal outer dia Pipes ITEM CODE 93 200 M
93 93 i) 15 mm dia nominal bore ITEM CODE 94 30 M
94 94 ii) 20 mm dia nominal bore ITEM CODE 95 10 M
95 95 Providing and fixing brass bib cock of approved quality : ITEM CODE 96
96 96 i) 15 mm nominal bore ITEM CODE 97 3 EA
97 97 Providing and fixing brass stop cock of approved quality : ITEM CODE 98
98 98 i) 15 mm nominal bore ITEM CODE 99 3 EA
99 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : ITEM CODE 100
100 100 i) 25 mm nominal bore ITEM CODE 101 2 EA
101 101 Constructing masonry Chamber 30x30x50 cm, inside, in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with CI surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5 ITEM CODE 102 4 EA
102 102 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 ITEM CODE 103 4 EA
103 103 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design ITEM CODE 104 1 EA
104 104 Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet) ITEM CODE 105 14 M
105 105 Providing & laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment & sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. ITEM CODE 106 60 M2
106 106 iv) 20mm dia x 900mm long with 100 mm dia x 6 mm thick plate ITEM CODE 107 28 EA
107 107 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate ITEM CODE 108 1 EA
108 108 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ITEM CODE 109 1000 L
109 109 i) All kinds of Soil ITEM CODE 110 25 M3
110 110 iv) Hard Rock(Blasting Prohibited) chiesel/pneumatic drilling ITEM CODE 111 80 M3
111 111 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil ITEM CODE 112 15 M3
112 112 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in ordinary or hard rock ITEM CODE 113 15 M3
113 113 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m ITEM CODE 114 40 M3
114 114 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. ITEM CODE 115
115 115 i) Local Fine Sand within grading zone IV ITEM CODE 116 20 M3
116 116 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: ITEM CODE 117
117 117 ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm) ITEM CODE 118 2 M3
118 118 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) ITEM CODE 119 2 M3
119 119 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) ITEM CODE 120 7 M3
120 120 Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing : ITEM CODE 121
121 121 iii) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 20mm ITEM CODE 122 5 M3
122 122 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ITEM CODE 123
123 123 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm ITEM CODE 124 2 M3
124 124 Centering and shuttering including strutting, propping etc. and removal of form for : ITEM CODE 125
125 125 i) Foundations,footings,bases of columns, etc. for mass concrete ITEM CODE 126 20 M2
126 126 ii) Walls (any thickness) including attached pilasters, buttress, plinth and string courses etc. ITEM CODE 127 15 M2
127 127 iv) Lintels, beams plinth beams,girders bressumers and cantilevers ITEM CODE 128 15 M2
128 128 v) Columns, Pillars, Piers, Abutments, Posts and Struts. ITEM CODE 129 20 M2
129 129 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels ITEM CODE 130
130 130 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 ITEM CODE 131 200 KG
131 131 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth ITEM CODE 132
132 132 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH ITEM CODE 133 7 M3
133 133 Brick on edge flooring with bricks of Class designation 7.5 on a bed of 12mm cement mortar including filing the joints with same mortar with common burnt clay non modular bricks ITEM CODE 134
134 134 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks ITEM CODE 135 70 M2
135 135 Providing and laying random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level in CM 1:6 (1 cement : 6 coarse sand) ITEM CODE 136 2 M3
136 136 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. ITEM CODE 137
137 137 iv) Granite of any colour and shade having Area of slab over 0.50 sqm ITEM CODE 138 18 M2
138 138 Supply and fixing High Density Polymer Water pipe as per IS 4984, PE-63 grade,10Kg/sqcm rating for borewell including all fittings etc ITEM CODE 139
139 139 vii) 40mm dia HDPE pipe for borewell upto a depth of 65m ITEM CODE 140 300 M
140 140 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : ITEM CODE 141
141 141 ii) 16mm dia x 400mm long with 75 mm dia x 5 mm thick plate ITEM CODE 142 6 EA
142 142 INSTALLATION OF SUPPLIED 20KL TANK ITEM CODE 143
143 143 iii) In brick masonry pit with RCC strip under driveway including RCC top slab as per standard Drg. ENG/317. Manhole cover plates and frame to be paid separately . ITEM CODE 144 2 LS
144 144 Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping ITEM CODE 145
145 145 ii) S/L Threaded U/G HD MS Pipes of 80 mm dia with fittings,doping ITEM CODE 146 6 M
146 146 iii) S/L Threaded U/G HD MS Pipes of 50 mm dia with fittings,doping ITEM CODE 147 40 M
147 147 iv) S/L Threaded U/G HD MS Pipes of 40 mm dia with fittings,doping ITEM CODE 148 60 M
148 148 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein ITEM CODE 149
149 149 i) S/W Slipon flanges of 100 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein ITEM CODE 150 2 EA
150 150 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein ITEM CODE 151 10 EA
151 151 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. ITEM CODE 152
152 152 i) Making Flange joint between Slip on,blind and flange etc.of 100mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding ITEM CODE 153 2 EA
153 153 iii) Making Flange joint between Slip on,blind and flange etc.of 50 mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding ITEM CODE 154 5 EA
154 154 ii) S/I of Threaded Union of 50 mm ITEM CODE 155 2 EA
155 155 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. ITEM CODE 156
156 156 iii) Supply & installation of U type CS bend on vent pipe of 40 mm dia ITEM CODE 157 2 EA
157 157 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve ITEM CODE 158
158 158 iii) S/I Screwed type GM Ball Valve of 50 mm dia ITEM CODE 159 4 EA
159 159 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump ITEM CODE 160
160 160 i) 2 product - 4 nozzle MPPs/MPDs ITEM CODE 161 2 EA
161 161 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works: ITEM CODE 162
162 162 ii) Horizontal air compressor Assembly of 3 HP (160-220 LITRES) including civil works ITEM CODE 163 1 EA
163 163 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) ITEM CODE 164 1 EA
164 164 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) ITEM CODE 165
165 165 iii) 15/20 KL Tank with fittings : 0 - 30 Km ITEM CODE 166 2 LS
166 166 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km ITEM CODE 167 400 KM
167 167 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km ITEM CODE 168 1 LS
168 168 ix) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km ITEM CODE 169 200 KM
169 169 xii) MPD/MPP pumps upto 2 nos., 0-30 Km ITEM CODE 170 1 LS
170 170 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km ITEM CODE 171 200 KM
171 171 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge ITEM CODE 172 2 EA
172 172 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items ITEM CODE 173
173 173 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS ITEM CODE 174 400 M
174 174 xvii) 3.5 Core x 35 sq. mm Aluminium Cable FRLS ITEM CODE 175 80 M
175 175 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. ITEM CODE 176
176 176 vii) 3 Core x 2.5 sq. mm ITEM CODE 177 15 EA
177 177 xvii) 3.5 Core x 35 sq. mm ITEM CODE 178 2 EA
178 178 FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Baliga/CEAG-FCG /Flexpro/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. ITEM CODE 179
179 179 vii) 3 Core x 2.5 sq. mm ITEM CODE 180 6 EA
180 180 Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil ITEM CODE 181
181 181 iii) 200mm x 25mm x 2mm ITEM CODE 182 30 M
182 182 iv) 300mm x 25mm x 2mm ITEM CODE 183 20 M
183 183 ii) Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge ITEM CODE 184 2 EA
184 184 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : ITEM CODE 185
185 185 iii) 50 x 6 mm G.I. Strip ITEM CODE 186 100 M
186 186 iv) 25 x 6 mm GI strip ITEM CODE 187 100 M
187 187 Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job) ITEM CODE 188 2 EA
188 188 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc ITEM CODE 189
189 189 i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. ITEM CODE 190 2 M2
190 190 ii) 6 mm thick chequered plate on cable trench inside swtich room, DG room, earthing pit including cutting, painting, lifting hooks, etc ITEM CODE 191 2 M2
191 191 iii) Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework. ITEM CODE 192 1 EA
192 192 iv) 11 KV grade hand gloves, ISI mark ITEM CODE 193 2 EA
193 193 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. ITEM CODE 194
194 194 Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. ITEM CODE 195 1 EA
195 195 PROVIDING INTERNAL WIRING ITEM CODE 196
196 196 i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. ITEM CODE 197 40 EA
197 197 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make ITEM CODE 198
198 198 iv) 15Amp modular type switch ITEM CODE 199 4 EA
199 199 Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge. ITEM CODE 200
200 200 iii) 100 Amps., 4 Pole ITEM CODE 201 1 EA
201 201 MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking cpacity of following ratings ITEM CODE 202
202 202 ii) 6A to 32A SPN MCB ITEM CODE 203 10 EA
203 203 iii) 6A to 32A DP MCB ITEM CODE 204 6 EA
204 204 vi) 63A FP MCB ITEM CODE 205 1 EA
205 205 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings. ITEM CODE 206
206 206 iii) 500VA CVT ITEM CODE 207 2 EA
207 207 SINGLE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 180 - 250 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification ITEM CODE 208
208 208 iv) 5KVA stabilizer ITEM CODE 209 2 EA
209 209 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. ITEM CODE 210
210 210 i) S/E Arm " L " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge ITEM CODE 211 2 EA
211 211 ii) S/E Arm " Y " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge ITEM CODE 212 4 EA
212 212 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. ITEM CODE 213
213 213 i) "Y" Pole ITEM CODE 214 4 EA
214 214 ii) "L" Pole ITEM CODE 215 2 EA
215 215 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : ITEM CODE 216
216 216 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) ITEM CODE 217 6 EA
217 217 Supply and fixing of LED (Light Emitting Diode) light fitting of 30 Watts Light having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-277V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K) as per ANSI C78.377, CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens /watt. The driver shall be of constant volt & constant current type type with internal surge protection. Each lot of fittings shall have numbers and accompany LM79 / IS 16106 test reports and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. ITEM CODE 218 5 EA
218 218 Supply and Fixing of LED (Light Emitting Diode) light fitting of 100 Watts Light having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-277V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 120 Lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. ITEM CODE 219 10 EA
219 219 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. ITEM CODE 220 10 EA
220 220 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. ITEM CODE 221 6 EA
221 221 Supply & fixing recessed mounted Discrete LED (Light Emitting Diode) Light fittings of 80 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with 4mm thick toughened glass of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 120 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. and the fitting shall have suitable arrangement for fixing it in the Canopy. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting. ITEM CODE 222 12 EA
222 222 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). ITEM CODE 223
223 223 ii) 9" dia light duty, make Khaitan or equivalent ITEM CODE 224 2 EA
224 224 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire ITEM CODE 225 100 M
225 225 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire ITEM CODE 226 100 M
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail