Madhya Pradesh Poorv Kshetra Vidyut Vitaran Co Ltd-MPEZ has published Construction Of Control Room And Drilling Of Borewell Alongwith Providing And Fixing Of Submersible Pump At 33/11 Kv S/S At Gram Bhawal Under Narayanganj Dc Mandla .. Submission Date for this Tender is 18-02-2020. Submersible Pump Tenders in SE (Civil) Jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: CONSTRUCTION OF CONTROL ROOM AND DRILLING OF BOREWELL ALONGWITH PROVIDING AND FIXING OF SUBMERSIBLE PUMP AT 33/11 KV S/S AT GRAM BHAWAL UNDER NARAYANGANJ DC MANDLA. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Boring, providing and installing bored cast-in-situ reinforced cement……. | 20.10.1 | 88 | rm |
2 | 2 | Filling available excavated earth ( excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 2.25 | 656 | cum |
3 | 3 | Earth work in excavation by mechanical means (Hydraulic\nexcavator) / manual means in over areas foundation trenches\nor drains (not exceeding 1.5 m in width or 10 sqm on plan)\nincluding dressing of sides and ramming of bottoms, lift upto\n1.5 m, including getting out the excavated soil and disposal of\nsurplus excavated soil as directed, within a lead of 50 m.\n2.6.1 All kinds of soil.\n\n | 2.6.1 | 750 | cum |
4 | 4 | Brick work with well brunt open bhatta, bricks, crushing strength not\nless than 25kg /sqcm and water absorption not more than 20% in\nfoundation and plinth\n6.5.2 Cement Mortar 1:6 (1 cement : 6 sand).\n\n | 6.5.2 | 10 | cum |
5 | 5 | Brick work with well brunt open bhatta, bricks, crushing strength not\nless than 25kg /sqcm and water absorption not more than 20% in\nfoundation and plinth\n6.6.2 Cement Mortar 1:6 (1 cement : 6 sand).\n\n | 6.6.2 | 17.5 | cum |
6 | 6 | Providing and laying damp-proof course 40mm thick with cement\nconcrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggegate\n12.5mm nominal size).\n\n | 4.1 | 7.26 | sqm |
7 | 7 | Supplying and filling in plinth with Hard muram/ Hard copra\nunder floors including, watering, ramming consolidating and\ndressing complete\n\n | 2.28.1 | 740 | cum |
8 | 8 | Providing and laying in position cement concrete of specified grade\nexcluding the cost of centering and shuttering - All work up to plinth\nlevel :\n4.1.2.3 M 7.5\n\n | 4.1.2.3 | 5.143 | cum |
9 | 9 | Reinforcement for R.C.C. work including straightening, cutting,..5.16.1 Mild steel and Medium Tensile steel bars. | 5.16.1 | 200 | kg |
10 | 10 | Reinforcement for R.C.C. work including straightening, cutting,\nbending, placing in position and binding including cost of binding\nwire up to floor two level including all wastage etc. complete.\n5.16.6 Thermo-Mechanically Treated bars.(TMT)\n\n | 5.16.6 | 1911.21 | kg |
11 | 11 | Providing and laying in position specified grade of reinforced\ncement concrete (with 20mm nominal size graded stone\naggregate) excluding the cost of centering, shuttering, finishing and\nreinforcement - All work up to plinth level :\n5.1.1 M 20 Nomial mix\n\n | 5.1.1 | 21.69 | cum |
12 | 12 | Painting with synthetic enamel paint of approved brand and\nmanufacture of required colour to give an even shade:\n13.69.1 Two or more coats on new work over an under coat\nof suitable shade with ordinary paint of approved\nbrand and manufacture.\n\n | 13.69.1 | 18.9 | sqm |
13 | 13 | Centering and shuttering including strutting, propping etc. and\nremoval of form for :\n5.9.1 Foundations, footings, bases of columns, etc. for mass\nconcrete up to plinth level.\n\n | 5.9.1 | 94.08 | sqm |
14 | 14 | 5.9.3 Suspended floors, roofs, landings, balconies and access\nplatform. Shelves (Cast in situ) Lintels, beams, beams,\ngirders, bressumers and cantilevers, Columns, Pillars,\nPosts and Struts Walls in super structure.\n\n | 5.9.3 | 95 | sqm |
15 | 15 | Providing and fixing pressed steel door frames confirming to IS:\n4351manufactured from commercial mild steel sheet of 1.25 mm\nthickness including hinges jamb, lock jamb, bead and if required\nangle threshold of mild steel angle of section 50x25mm, or base\nties of 1.25mm pressed mild steel welded or rigidly fixed\ntogether by mechanical means, adjustable lugs with split end tail\nto each jamb including steel butt hinges 2.5mm thick with mortar\nguards, lock strike- plate and shock absorbers as specified and\napplying a coat of approved steel primer after pre-treatment of\nthe surface as directed by Engineer-in-charge:\n10.13.2 Single rebate ( size, 100 mm x 50 mm)\n\n | 10.13.2 | 10.15 | rm |
16 | 16 | Providing and fixing ISI marked flush door shutters conforming to\nIS: 2202 (Part I) non-decorative type, core of block board\nconstruction with frame of 1st class hard wood and well matched\ncommercial 3 ply veneering with vertical grains or cross bands\nand face veneers on both faces of shutters :\n9.19.2 30 mm thick including ISI marked Stainless Steel butt\nhinges with necessary screws.\n\n | 9.19.2 | 3.507 | sqm |
17 | 17 | Providing and fixing factory made ISI marked steel glazed\ndoors,windows and ventilators side /top /centre hung with\nbeading and all members such as K11 B and K12 B etc.\ncomplete of standard rolled steel sections, joints mitred and\nflash butt welded and sash bars tenoned and riveted with\n15x3mm lugs, 10cm long, embedded in cement concrete blocks\n15x10x10cm of 1:3:6 (1 cement : 3 sand : 6 graded stone\naggregate 20mm nominal size) or with wooden plugs and\nscrews or rawl plugs and screws or with fixing clips or with bolts\nand nuts as required, including providing and fixing of\nhinges,pivots, float glass panes with glazing clips and special\nmetal sash putty of approved make and a priming coat of\napproved steel primer excluding the cost of metal beading and\nother fittings except necessary hinges or pivots complete as per\napproved design. (glass panes paid sepertely)\n\n | 10.10.1 | 130 | kg |
18 | 18 | 15 mm cement plaster on rough side of single or half brick wall\nof mix :\n13.2.2 1:6 (1 cement: 6 sand)\n\n | 13.2.2 | 147.9 | sqm |
19 | 19 | 20 mm cement plaster of mix :\n13.3.2 1:6 (1 cement: 6 sand)\n\n | 13.3.2 | 117.5 | sqm |
20 | 20 | Kota / cuddapah stone slab flooring over 20 mm (average)\nthick base laid over and jointed with grey cement slurry mixed\nwith pigment to match the shade of the slab including\nrubbing and polishing complete with base of cement\nmortar 1 : 4 (1 cement : 4 sand) :\n11.34.1 25 mm thick.\n\n | 11.34.1 | 50 | sqm |
21 | 21 | Kota /cuddapahstone slabs 25 mm thick in risers of steps,\nskirting, dado and pillars laid on 12 mm (average) thick\ncement mortar 1:3 (1 cement 3 sand) and jointed with grey\ncement slurry mixed with pigment to match the shade of the\nslabs, including rubbing and polishing complete.\n\n | 11.35 | 4.88 | sqm |
22 | 22 | wall painting with plastic emulsion paint of approved…. | 13.49.1 | 155.29 | sqm |
23 | 23 | Finishing walls with Acrylic Smooth exterior +paint of required\nshade:\n13.55.1 New work (Two or more coat applied @ 1.67 ltr/10\nsqm over and including base coat of water proofing\ncement paint applied @ 2.20 kg/ 10 sqm).\n\n | 13.55.1 | 138 | sqm |
24 | 24 | Providing and fixing M.S. grills of required pattern in frames of\nwindows etc. with M.S. flats, square or round bars etc. all\ncomplete.\n9.43.1 Fixed to steel windows by welding.\n\n | 9.43.1 | 165 | kg |
25 | 25 | Making plinth protection 50mm thick of cement concrete grade M\n10 over 75mm bed of dry metal ballast 40mm nominal size well\nrammed and consolidated and filled with sand including finishing\nthe top smooth (with 20mm nominal size graded stone aggregate.)\n\n | 4.17 | 35 | sqm |
26 | 26 | P/f glass panes with …….. | 10.27.1 | 792.45 | sqm |
27 | 27 | Extra over item No.20.3 for providing additional bulb in under\nreamed piles, under specified dia meter (Only the quantity of\nextra bulbs are to be paid).\n20.11.1 250mm dia piles.\n\n | 20.11.1 | 4 | Nos |
28 | 28 | Providing and fixing Ist quality ceramic glazed wall tiles\nconforming to IS : 15622 (6-7mm thickness) of approved make\nin all colours, shades except burgundy, bottle green, black of\nany size as approved by Engineer-in-Charge in skirting, risers\nof steps and dados over 12 mm thick bed of cement Mortar\n1:3 (1 cement : 3 sand) and jointing with grey cement slurry\n@ 3.3kg per sqm including pointing in white cement mixed\nwith pigment of matching shade complete\n\n | 11.46 | 9.5 | sqm |
29 | 29 | Providing and fixing water closet squatting pan (Indian type\nW.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low\nlevel white P.V.C. flushing cistern with manually controlled\ndevice (handle lever) conforming to IS : 7231, with all fittings\nand fixtures complete including cutting and making good the\nwalls and floors wherever required :\n17.1.1 White Vitreous china Orissa pattern W.C. pan of\nsize 580x440mm with integral type foot rests.\n\n | 17.1.1 | 1 | Nos |
30 | 30 | Distempering with oil bound washable distemper of approved\nbrand and manufacture to give an even shade\n13.47.1 New work (two or more coats) over and including\npriming coat with cement primer.\n\n | 13.47.1 | 18 | sqm |
31 | 31 | Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded\nstone aggregate) finished with a floating coat of neat cement\nincluding cement slurry, but excluding the cost of nosing of\nsteps etc. complete.(Area of panels not exceeding 2 sqm)\n11.1.1 40mm thick with 20mm nominal size stone\naggregate.\n\n | 11.1.1 | 1.8 | sqm |
32 | 32 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P.\nbrass pillar taps,32 mm C.P. brass wa ste of standard pattern,\nincluding painting of fittings and brackets, cutting and\nmaking good the walls wherever require :\n17.7.3 White Vitreous China Wash basin size 550x400 mm\nwith a pair of 15 mm C.P. brass pillar taps.\n | 17.11.4 | 1 | Nos |
33 | 33 | Providing and fixing M.S. grills of required pattern in frames of\nwindows etc. with M.S. flats, square or round bars etc. all\ncomplete\n9.43.2 Fixed to steel windows by welding.\nProviding and fixing M.S. grills of required pattern in frames of\nwindows etc. with M.S. flats, square or round bars etc. all\n | 9.43.2 | 10 | kg |
34 | 34 | Providing fixing readymade septic tank for 15 users i/c installation excavation\nconnection with outlet inlet i/c transportation all t&P labour material complete\nwork\n | NSOR | 1 | Nos |
35 | 35 | Steel work welded in built up sections/ framed work including\ncutting, hoisting, fixing in position and applying a priming coat of\napproved steel primer using structural steel etc. as required.\nhoisting, fixing in position and applying a priming coat of\napproved steel\n10.22.2 In gratings, frames, guard bar, ladder, railings,\nbrackets, gates and similar works.\n\n | 10.22.2 | 225 | kg |
36 | 36 | Providing and laying in position cement concrete of specified grade\nexcluding the cost of centering and shuttering - All work up to plinth\nlevel :\n4.1.1.3 M 15\n\n | 4.1.1.3 | 0.3 | cum |
37 | 37 | Providing and placing on terrace (at all floor levels) high\ndersign HDPE (polyethylene) water storage tank ISI : 12701\nmarked with cover and suitable locking arrangement and\nmaking necessary holes for inlet, outlet and arrangement\nand making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank\n\n | 19.49 | 1000 | Lit. |
38 | 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)…………18.9.2 20 mm nominal outer dia .Pipes. | 18.9.2 | 20 | rm |
39 | 39 | pipes, having thermal stability for hot & cold water supply\nincluding all CPVC plain & brass threaded fittings This includes\njointing of pipes & fittings with one step CPVC solvent cement\n,trenching ,refilling & testing of joints complete as per direction\nof Engineer in Charge.\n18.9.3 25 mm nominal outer dia .Pipes.\n\n | 18.9.3 | 20 | rm |
40 | 40 | Providing and fixing on wall face unplasticised Rigid PVC Rain\nwater pipes conforming to IS : 13592 Type A including jointing\nwith seal ring conforming to IS : 5382 leaving 10 mm gap for\nthermal expansion.for soil and wast pipes Single socketed\npipes for working pressure of 4 kg./cm2\n12.74.3 110 mm diameter\n\n | 17.58.2 | 7 | rm |
41 | 41 | Providing and fixing on wall face unplasticised - PVC moulded\nfittings/ accessories for unplasticised Rigid PVC Rain water\npipes conforming to IS : 13592 Type A including jointing with\nseal ring conforming to IS :5382 leaving 10 mm gap for thermal\nexpansion.\n17. 75.3.3 Tee - 110x110x110 mm\n\n | 17.59.3.2 | 2 | Nos |
42 | 42 | Providing and fixing ball valve (brass) of approved quality, High\nor low pressure, with plastic floats complete :\n18.35.3 25 mm nominal bore\n\n | 18.35.3 | 1 | Nos |
43 | 43 | Providing and fixing C.P. brass bib cock of approved\nquality conforming to IS:8931\n18.52.1 15 mm nominal bore.\n\n | 18.52.1 | 2 | Nos |
44 | 44 | Providing and laying in position cement concrete of specified grade\nexcluding the cost of centering and shuttering - All work up to plinth\nlevel :M10\n | 4.1.1.4 | 15.83 | cum |
45 | 45 | Point wiring (excluding metallic switch box & sheet but including switches, Lamp holders/ ceilling roses etc.) with 1.5 sqmm PVC .............as per specification for\n3.1 Light point/ Fan Points\nShort Point\n\n | 3.1.1 | 8 | Nos |
46 | 46 | Point wiring (excluding metallic switch box & sheet but including switches, Lamp holders/ ceilling roses etc.) with 1.5 sqmm PVC .............as per specification for\n3.1 Light point/ Fan Points\nMedium Point\n | 3.1.2 | 10 | Nos |
47 | 47 | Point wiring (excluding metallic switch box & sheet but including switches, Lamp holders/ ceilling roses etc.) with 1.5 sqmm PVC .............as per specification for\n3.1 Light point/ Fan Points\nLong Point\n | 3.1.3 | 6 | Nos |
48 | 48 | 3.2- 3 pin 6 Amp socket outlet on Seperate Board \nShort Point\n\n | 3.2.1 | 1 | Nos |
49 | 49 | 3.2- 3 pin 6 Amp socket outlet on Seperate Board \nMedium point\n\n | 3.2.2 | 2 | Nos |
50 | 50 | Wiring for Circuit wirung \na 2x2.5 Sqmm\n\n | 3.6.1 | 35 | rm |
51 | 51 | Wiring for Circuit wirung \nb 4x2.5 Sqmm\n | 3.6.2 | 30 | rm |
52 | 52 | Point wiring (excluding metallic switch box & sheet .) for 3 Pin 16 amp socket outlet with 4 sqmm PVC .............as per specification for\nShort Point\n\n | 8.1.1 | 3 | Nos |
53 | 53 | Point wiring (excluding metallic switch box & sheet .) for 3 Pin 16 amp socket outlet with 4 sqmm PVC .............as per specification for\nMedium Point\n\n | 8.1.2 | 3 | Nos |
54 | 54 | Supply of ISI Marked switch fuse unit…..32amps | 25.1.2 | 1 | Nos |
55 | 55 | Supply of ISI Marked and accepted standard of miniature cuircuit breakers (MCB)\nSingle Pole and Neutral\n | 27.5.2.2 | 4 | Nos |
56 | 56 | Supply of approved make powder coated sheet steel encloser SPN MCB DB \n4 Way Single Door\n\n | 27.7.2 | 1 | Nos |
57 | 57 | Supplying and Fixing as per specifications Bulk Head fitting of approved make suitable for 100 Watt lamp with necessary material complete. | 31.6 | 4 | Nos |
58 | 58 | Supplying, erection and testing of approved make electric ceilling Fan of double ball bearing\nCeilling Fan (Energy Saver 50W) 1200mm sweep\n\n | 30.1.1 | 2 | Nos |
59 | 59 | Supping and Fixing of approved make electronic Fan regulator including connection etc. as required on existing Board.\n450Watt\n\n | 29.28 | 2 | Nos |
60 | 60 | Supplyinf, Fixing and testing of approved make fluorescent tube fitting rust resistant \n1x36/40 watt\n | 31.3.1 | 4 | Nos |
61 | 61 | Supplying , Fixing and testing Fluorescent tube Rod\n4'x40 watt\n | 29.19.1 | 4 | Nos |
62 | 62 | Earthing with copper plate 600x600x3mm thick including...............................and GI watering pipe 20mm dia 2.7m long etc. (But without charcoal or coke and salt) Complete as require. | 37.4 | 1 | Nos |
63 | 63 | Add exta for using salt and charcoal/coke ..........................including excavation and refilling. | 37.5.1 | 1 | Nos |
64 | 64 | Supplying and filling with stone dust… | 2.27 | 5.9 | cum |
65 | 65 | Supplying and installation of 2 hp with 25 stage head mt 163-58 singh phase submersible pump…. | 39.1.3.5 | 1 | Nos |
66 | 66 | supplying & laying of submercible flat cable……………………. Approved make 25 sq mm Multi srend | 39.3.1.1 | 135 | rm |
67 | 67 | Supplying and laying of approved make HDPE pipe 33 mtr. Dia pipe….. | 39.4.1.2 | 130 | rm |
68 | 68 | Supplying and laying of approved make Nylon rope 12 mm thick complete with binding for support of pump and motor | 39.5 | 140 | rm |
69 | 69 | Boring /Drilling bore well of required dia perfectly vertical to receive casing. Stainer pipe, by sutiable method perescrivedin IS 2800 (Part I) including collecting samples from different starta, preparing and submitting starta chart/ bore log, including hire and running charges of all requipments, tools, plants and machineries reuiared for the job all complete as per direction of engineer ingh charge u p to 90 meter depth below Ground level, All Types of soil 150mm dia | 16.1.1.2 | 40 | rm |
70 | 70 | Boring/ drilling borewell of required dia…..\n16.1.2.2 Rocky strata 150 mm dia \n\n | 16.1.2.2 | 60 | Nos |
71 | 71 | Supplying assembling, lowering and fixing in vertical positon in borewell\nPVC casing\n16.3.2 150 MM\n\n | 16.3.2 | 70 | Nos |
72 | 72 | Supplying assembling, lowering and fixing in vertical positon in borewell\nPVC screen casing…… 150 mm dia \n\n | 16.4.2 | 30 | Nos |
73 | 73 | P/f suitable size MS Cap 150 mm dia | 16.9.2 | 1 | Nos |
74 | 74 | Providing & fixing MS clamp of required dia made of 100x10 mm flat to the top of casing/ housing pipe of tubewell as per Is 2800 (Part I) including necessary bolts and nuts of require size complete Engineer in charge 150mm size | 16.10.2 | 1 | Nos |
75 | 75 | Providing & fixing bail plug/ bottom plug /of reuqired dia to the bottom of pie assebmly of tubewell as per IS 2800 Engineer in charge 150mm size | 16.11.2 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail