South Eastern Coalfields Limited-SECL has published Dismantling And Fabrication Works For Changing Of Chassis , Hopper And Operator Cabin Along With Providing And Fixing Of Dust Suppression Arrangement And Trial And Run Of Feeder Breaker Of Landt-2 Feeder Breaker At Dipka Unit Of Gevra Project . . Submission Date for this Tender is 11-02-2020. Dismantling Work Tenders in Gevra Project Chhattisgarh. Bidders can get complete Tender details and download the document.
Name of the Work / Contract No: | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the instruction of Engineer I/C. | 13 | 37.21 | Te |
2 | 2 | Dismantling steel work in built up section in angles ,tees, flats & channel including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering & stacking within 50 mtr. Lead. | 14 | 76.67 | Te |
3 | 3 | Excavation for founadation in soft soil including dressing of sides and ramming of bottom , lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. | 15 | 9.54 | cum |
4 | 4 | Providing and laying in position reinforced cement concrete 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) in foudation work as required ( Excluding reinforcement). | 16 | 9.27 | cum |
5 | 5 | Providing and laying in position cement concrete 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in foudation work as required. | 17 | 1.44 | cum |
6 | 6 | Providing of MS round bar ( Twisted) for reinforcement @ 60 kg/cum. | 18 | 556.2 | kg |
7 | 7 | Demolishing cement concrete 1:3:6 or richer | 19 | 1.17 | cum |
8 | 8 | Dismantaling of GI sheet etc. complete and stacking the materials within 50 mtrs. Lead as per instructions of Engr. I/c. | 20 | 147.42 | sqm |
9 | 9 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated "J" or "L" hooks, bolts and nuts 8mm diamter with bitumen and GI limpet washer or with GI limpet washers fitted with whitelead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses including cutting to size and shape wherever required 0.63mm thick. | 21 | 190.42 | sqm |
10 | 10 | Providing and fixing of MS flat | 22 | 198 | kg |
11 | 11 | Painting of structural steel work with 3 coat including 1 coat of primer of red oxide or equivalent primer paint of approved brand and 2 coats of enamel paint of approved brand of required shade as directed by Engr. I/c | 23 | 72.71 | Te |
12 | 12 | Cleaning of coal as and where required. | 24 | 48 | cum |
13 | 13 | Providing and fixing of expanded wire mesh of size 20mm X 60mm and strand 3.25mm wide X 1.6mm thick, weighing 3.64kg/sqm | 25 | 37.2 | sqm |
14 | 14 | Providing and fixing of pre-fabricated cabin with insulated puff sheet and AC | 26 | 1 | set |
15 | 15 | Installation, commissioning and trial run of complete feeder breaker | 27 | 42 | Te |
16 | 16 | Providing and fixing of GI pipe complete with GI fitting and clamp etc.(40mm dia nominal bore) | 28 | 43 | Mtr |
17 | 17 | Providing and fixing of GI pipe complete with GI fitting and clamp etc.(25mm dia nominal bore) | 29 | 2 | Mtr |
18 | 18 | Providing and fixing of gun metal gate valve with CI wheel of approved quality(Screwed end)(40mm nominal bore) | 30 | 3 | nos. |
19 | 19 | Providing and fixing of gun metal gate valve with CI wheel of approved quality(Screwed end)(25mm nominal bore) | 31 | 3 | nos. |
20 | 20 | Providing and fixing of spray nozzles solid cone, discharging 25 lpm, 4kg/m2 and made out of SS 304 BSP thread. | 32 | 96 | nos. |
21 | 21 | Dismantling of MS pipe, 4" | 33 | 10 | mtr |
22 | 22 | Laying and jointing of MS pipe, 4" | 34 | 8 | mtr |
23 | 23 | Fixing of sluice valve | 35 | 1 | no |
24 | 24 | Making connection of MS/GI distribution branch with MS/GI main including cutting, welding the pipe etc., 150mm to 200mm dia | 36 | 1 | no. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail