}

State Plan Supply Errection And Commissioning Of C F Pump Set Having Duty Conditions Discharge 50 M3/Hr At Speed 1470Rpm Head 145M At Poovathilappu, pala-Kerala

Kerala Water Authority-KWA has published State Plan Supply Errection And Commissioning Of C F Pump Set Having Duty Conditions Discharge 50 M3/Hr At Speed 1470Rpm Head 145M At Poovathilappu. Submission Date for this Tender is 31-01-2020. Submersible Pump Tenders in pala Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

23377526
State Plan Supply Errection And Commissioning Of C F Pump Set Having Duty Conditions Discharge 50 M3/Hr At Speed 1470Rpm Head 145M At Poovathilappu
Open Tender
Indian
Kerala
pala
31-01-2020

Tender Details

State Plan Supply Errection And Commissioning Of C F Pump Set Having Duty Conditions Discharge 50 M3/Hr At Speed 1470Rpm Head 145M At Poovathilappu

Key Value

Document Fees
INR 1456 /-
EMD
INR 15500.0 /-
Tender Value
INR 6.19 Lakhs /-

BOQ Items

Name of Work: State Plan 2019-2020 : ARWSS to Puliyannoor, Meenachil Akalkunnam villages - Supply, erection & commissioning of centrifugal multi stage pump set at Malayiruthy booster pump house to Poovathilappu Tank
Item Description Item Code / Make Quantity Units
1 State Plan 2019-2020 :Supply, erection & commissioning of centrifugal multi stage pump set\n\n 1.- PUMP : Supply, erection,and commissioning of Centrifugal multi stage pump set - 1- PUMP Supply erection, testing and commissioning of KWA pre qualified reputed make Centrifugal pump sets having duty conditions: discharge 50 m3/hr, speed : 1470 rpm, head : 145 m with Bronze/SS impeller,SS shaft and CI pump casing with suitable for coupling, coupling guard foundation bolts & nuts etc., complete suitable for coupling the pump and motor above the base plate etc. complete including providing suitable concrete foundation including cost of cement,sand and metal etc complete.\n2. Motor: Supply, erection,testing and commissioning of KWA pre qualified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50 Hz AC supply, working voltage 415 V/3300V(select the suitable). The motor shall confirm to EEFI/IS 325 including providing suitable concrete foundation including cost of cement sand and metal etc. complete. For 3300 v motors digital motor protection relay shall be included in starter as per present IE rules. Flexible coupling shall be used for coupling of pumps and motors.\n3.Starter : Supply, erection,testing and commissioning of suitable rating (Fully Automatic starter with air break, contact for less than 100 HP and for above 100 HP FCMA starters to be used) Starter suitable for the above motor over voltage and under voltage protection,single phase preventer, over load relay with motor protection relay with main contractor and bypass contractor as per IE rules and code of practice etc.complete.\n4.Panel Board( Suitable for operating two pump sets but one pump set at a time : Supply, erection,testing and commissioning of cubical type floor monted MS fabricated common control panel board consisting of 1 no suitable capacity MCCB as incomer and 2 nos of suitable capacity MCCB as out going(the two MCCBs are interlocking with each other) providing suitable size Aluminium bus bar inter connect the above MCCBs and fitted with 3 Nos of indicator lamps,1 No. volt meter with selector switch, 1 No.ammeter with selector switch etc. Complete and provided with a common earth bus for the entire panel and interconnect with the MCCbs as p[er IE rules and code of practice. The panel shall be fitted on a common base frame on suitable foundation.(Specification may be modified if there is only one pump set by changing 2 nos of out going as one out going and the provision of interlocking may be avoided)\n5.cabling work :Supplying, laying.testing and commissioning of suitable size XLPE cbles for the above pump set from to starter and from starter to motor,considering energy conservation\n6.Earthing :Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc.as per IE standards.\n7.capacitor :Supply,erection,testing and commissioning of heavy duty APP capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834\n8.valves :Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump set sluice valve should be in suction as well as delivery sides for easy repair works.\n9.Suction and Delivery Pipes connections :Supply and fitting of suitable size best quality GI/MS pipe of thickness not less than 8mm for a total length of 10m suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges,nut and bolts IR sheet etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. If the dia of suction pipe is above 80 mm CI pipes and specials shall be provided. BI01010001010000000000000515BI0100001114 1 set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail