Supply Of Procurement Of Sub-Assemblies Of 35 Ton Jmp/Jack, Supply, Fixing And Assembling Of Gear Box Sub Assembly Comprising Of Components As Per Drg. No. Sk. No. 35T/Jmp/Jack/01/2017, Alt.-1 And Base Plate As Per Drg. No. Sk. No. 35T/Jmp/Jack/08/2017, Alt.- 1, Supply, Fixing And Assembling Gear Box & U Beam Assembly Comprising Sub Components As Per Drg. No Sk. No. 35T/Jmp/Jack/31/2017, Alt.-1 (Complete Assembly Drawing) U Beam Drg. No. Sk. No. 35T/Jmp/Jack/02/2017., Supply, Fixing And Assembling Of Screw Spindle Sub Assembly Comprising Of Components As Per Drg. No Sk. No. 35T/Jmp/Jack/29/2017, Alt.-1& Supply, Fixing And Assembling Of Sub Assembly Of Worm & Worm Wheel As Per Drg. No Sk. No. 35T/Jmp/Jack/29/2017, Alt.-1, Supply, Fixing And Assembling Of Lifting Sub Assembly Comprising Of Components As Per Drg. No Sk. No. 35T/Jmp/Jack/26/2017, Alt.-1, Supply, Fixing And Assembling Of Sub Assembly Of Comprising Of Rear Wheel & Handle Assembly Which Comprising Of Components As Per Drg. No Sk. No. 35T/Jmp/Jack/30/2017, Alt.-1& Supply, Fixing And Assembling Of Sub Assembly Of Sprocket And Chain Which Comprising Of Components As Per Drg. No Sk. No. 35T/Jmp/Jack/28/2017, Alt.-1& Supply, Fixing And Assembling Of Sub Assembly Of Side Wheel With Shaft Assembly Which Comprising Of Components As Per Drg. No Sk. No. 35T/Jmp/Jack/30/2017, Alt. 1, Spares With Metallic Kit Box Complete, One Set Consist Of 14 Items As Per Annexure Attached., Supply Fitment Assembling Pendent Type Push Button Assly. With 2 Nos. Of Normally Open Inching Type Push Button Suitable For With Cable Entry Arrangement For 35 Ton Jack. (Fibre Body) Quantity: 01 No. Make: Snt, L&T, Havells& Bch., Supply Fitment Assembling Heavy Duty General Purpose Limit Switch Oil Tight On Line Die Cast Aluminum Housing Suitable For 35 Ton Jack Supply Quick Brake Spring Loaded Lever With Roller 01 No. + 01 Nc With Normal Angular Roller Lever. With Quantity: 3. Nos. Per Jack. Make: Snt, L&T, Havells& Bch, Supply Fitment Assembling 4 Core Cable 10 Sq. Mm (80/0.4Mm) Copper Conductor Insulated And Heavy Duty Sheathed Flexible Core 1100 Volt Grade Conforming To Is-694 (Pl-1) 1981. Quantity: 100 Mtrs. Roll Per Set. Make: Kdk/Mescab/Snt/Havells., Supply Fitment Assembling Single Core 4 Sq.Mm (56/0.3 Mm) Copper Conductor Insulated And Sheathed Cable 1100 V. Grade. Quantity: 90 Mtrs. Roll Per Set. Make : Snt,Kdk & Mescab, Supply Fitment Assembling Air Brake Direct On Line Starter With 2 Sets Of 3 Pole Contactor Each Set Control Separately By 415V, 50Hz, Ac Contactor Coils. One Set Of Contractor Coils Is To Be Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Through Another Inching Button To Control The Reverse Direction Of 10 Hp, 3 Phase, 50 Hz 415 Volts Ac Motor. There Must Be Electrical Enter Locking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each Of Above Push Buttons Should Have One Normally Closed Auxiliary Contacts And One Stop Push Button Are Required. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug And Socket With Locking Arrangement As Shown In Schematic Diagram. Drg. No.10 Hp Jack Bom, 2. Drg. No. 10 Hp Jack Ckt, 3. Drg. No. 10 Hp Jack Ga Each Starter To Be Provided With 2 Nos. Power Plug And Socket And 2 Nos. Of Control Plug And Socket. Maximum Dimension 280 Mm (B) X 360 Mm (L) X 162 Mm (T). As Per Material Specification Is : 13947 Part-4 Sec-1 1993. Make-Bch, Snt &Havells, Supply Fitment Assembling 10 Hp Brake Motor With Fail Safe Disc Brake Assembly Material Specification Is-325/1996 And As Per Following:-A) Motor 10 Hp Squirrel Cage Totally Enclosed Fan Cooled Horizontally Foot Mounted With Brake Attachment Complete With Fan Cover Keys Including Holding Down Bolt For Brake: Fail Safe Disc Brake To Be Fitted With The Motor Mentioned Above With Electromagnetic Complete With Suitable Cover And Tool. Complete Maintenance/Operation Manual In Duplicate To Be Provided With Motor And Brake Assembly. Make: Delta, Pethe & Abb As Per Delta Drw No.: 050206, Supply Fitment Assembling Air Break Direct On Line Starter Wall Mounting Type With Push Button Control. Suitable For 3 Phase, 50Hz, 415V. 40Hp Motor. The Starter Shall Be Complete With Over Load And No Volt Protection. Citation Dol Motor Starter In Sheet Steel Enclosure With Citation E Contactor (With 380-415 V Coil) Cat Ref Nact2leem, Over Load Relay Range (37.6 To 60A), 70A Contactor, Citation E Contactor Is Very Rugged And Reliable Contactor Has Mechanical Interlocking Facility Optional. Make : Bch, L&T, Havells.
