Military Engineer Services-MES has published Special Repair To Building No P 50 Mt Garage At Cg Dhq 1 And Special Repair To Joinery And Sanitary Fittings At Icgae Porbandar Under Ge I Cg Porbandar. Submission Date for this Tender is 07-02-2020. Building Repair Tenders in PORBANDAR Gujarat. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 03-Feb-2020 | DATE CORRIGENDUM 1 | Date | 07-02-2020 |
Name of Work: SPECIAL REPAIR TO BUILDING NO P-50, MT GARRAGE, AT CGDHQ-1, AND SPECIAL REPAIR TO JOINERY AND SANITARY FITTINGS AT ICGAE PORBANDAR UNDER GE (I) CG PORBANDAR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | SCHEDULE 'A' | BI01010001010000000000000515BI0100001112 | ||
2 | 1.01 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., and getting out in any type of soil complete all as specified and as directed by Engr-in-Charge. | 10 | Cum | |
3 | 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in any type of soil. | 4 | Cum | |
4 | 3 | Removal of excavated soils n exc. 50m and depositing where directed at level n exc. 1.5 m above the starting point. all as specified. | 6 | Cum | |
5 | 4 | M&L Broken stone or boulders, Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed by Engr-in-Charge. | 1 | Cum | |
6 | 5 | M&L PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and as directed by Engr-in-Charge. | 3 | Cum | |
7 | 6 | M&L PCC 1:3:6, type C-2 as in filling in holes of hold fasts complete all as specified and as directed by Engr-in-Charge. | 1.5 | Cum | |
8 | 7 | M&L RCC 1: 2 : 4 Type B1 (using 20mm graded stone aggregate) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-Charge. | 0.75 | Cum | |
9 | 8 | M&L RCC M-30 (using 20mm garded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams; bases for columns, etc., basement slabs, under reamed piles and mass concrete, complete all as specified and as directed by Engr-in-Charge. | 2 | Cum | |
10 | 9 | M&L RCC M-30 (using 20mm graded stone aggregate) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like. complete all as specified and as directed by Engr-in-Charge. | 25 | Cum | |
11 | 10 | M&L RCC M-30 (using 20mm graded aggregate) for chajjas, complete all as specified and as directed by Engr-in-Charge. | 0.1 | Cum | |
12 | 11 | M&L RCC M-30 (using 20mm garded stone aggregate) as in beams, cantilevers, bressummers, lintels and the like complete all as specified and as directed by Engr-in-Charge. | 10 | Cum | |
13 | 12 | M&L RCC M-30 (using 20mm garded stone aggregate) as in column, pillars, piers, posts and structs etc. complete all as specified and as directed by Engr-in-Charge. | 1 | Cum | |
14 | 13 | Supply only water proofing compound (integral) complete all as specified and as directed by Engr-in-Charge. | 150 | Kgs | |
15 | 14 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed by Engr-in-Charge. | 80 | Each | |
16 | 15 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge. | 8 | Sqm | |
17 | 16 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge. | 10 | Sqm | |
18 | 17 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge. | 195 | Sqm | |
19 | 18 | Use and waste of formwork to sides and soffits of beams, bands and the like for fair finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge. | 90 | Sqm | |
20 | 19 | Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges as in rough finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge. | 5 | Sqm | |
21 | 20 | Use and waste of formwork to the sides of columns for fair finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge. | 10 | Sqm | |
22 | 21 | Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sq mtr each | 49 | Each | |
23 | 22 | All as per item No 21.00 but size exc 1.5 Sqm & n.exc 4.00 Sqm each. | 62 | Each | |
24 | 23 | Taking down shutters of any description not exc. 1.0 Sqm each. | 31 | Each | |
25 | 24 | All as per item No 23.00 but exc 1.0 and n.exc 2 Sqm each. | 24 | Each | |
26 | 25 | Refixing shutters of any description exc 1 sq.m and n exc 2 sq m each in same opening complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
27 | 26 | Taking down shutters of any description exc 1 sq.m and n exc 2 sq m each and refixing in same opening complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
28 | 27 | S&F Plain, solid, straight chowkats and frames, of 2nd class hardwood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge. | 1.65 | Cum | |
29 | 28 | S & F 35 mm thick 2nd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I Sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars. complete all as specified and as directed by Engr-in-Charge. | 68 | Sqm | |
30 | 29 | S&F 30 mm thick 2nd class HW plain framed panelled shutters (any no of panels) with panels of timber flat on both sides or veneered particle board medium density wood particle board with commercial face veneers complete all as specified and as directed by Engr-in-Charge. | 60 | Sqm | |
31 | 30 | S&F 35mm thick 2nd Class HW rail & Style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge. | 16 | Sqm | |
32 | 31 | S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on bothe sides complete all as specified and as directed by Engr-in-Charge. | 6 | Sqm | |
33 | 32 | S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on bothe sides complete all as specified and as directed by Engr-in-Charge. | 14 | Sqm | |
34 | 33 | S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles not exc. 200 cu. cm each complete all as specified and as directed by Engr-in-Charge. | 48 | Each | |
35 | 34 | S&F Factory made solid panel PVC cup board shutter 20mm thick (style) shutter reinforced with excellent polymeric reinforcement complete all as specified and as directed by Engr-in-Charge. | 20 | Sqm | |
36 | 35 | S&F 30mm thick Factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engr-in-Charge. | 51.5 | SQM | |
37 | 36 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS square tube, supplying & fixing in opening complete all as specified and as directed by Engr-in-Charge. | 145 | RM | |
38 | 37 | S&F Solid PVC door frame of size 48mmx40mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying add fixing in opening complete all as specified and as directed by Engr-in-Charge. | 20 | RM | |
39 | 38 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. | 112 | Each | |
40 | 39 | S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. | 16 | Each | |
41 | 40 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
42 | 41 | S&F 100 mm Aluminium, anodised, barrel tower bolts long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. | 70 | Each | |
43 | 42 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. | 46 | Each | |
44 | 43 | S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. | 16 | Each | |
45 | 44 | S & F 75mm stainless steel hinges of medium weight complete all as specified and as directed by Engr-in-Charge. | 80 | Each | |
46 | 45 | S&F100 mm medium weight, Butt hinges, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge. | 189 | Each | |
47 | 46 | S&F 75 mm medium weight, Butt hinges,cold rolled mild steel complete all as specified and as directed by Engr-in-Charge. | 94 | Each | |
48 | 47 | S&F 50 mm medium weight, Butt hinges, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge. | 62 | Each | |
49 | 48 | S&F 100 mm size, Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-Charge. | 60 | Each | |
50 | 49 | S&F 30mm width of flap, Continuous (piano) hinges, mild steel bright finish or electrogalvanised, complete all as specified and as directed by Engr-in-Charge. | 20 | RM | |
51 | 50 | S&F 125 mm size Aluminum handles, cast type anodized complete all as specified and as directed by Engr-in-Charge. | 60 | Each | |
52 | 51 | All as per item No 50.00 but 75 mm size complete all as specified and as directed by Engr-in-Charge. | 35 | Each | |
53 | 52 | S & F 100 mm size Aluminium handle (fancy type) as approved by the Engr-in-Charge. \nNote: Alumonium handle shall be as per the sample held with Engr-in-Charge. | 40 | Each | |
54 | 53 | S&F 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge. | 18 | Each | |
55 | 54 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge. | 52 | Each | |
56 | 55 | S & F Multipurpose locks 02 levers for cabinet etc with keys complete all as specified and as directed by Engr-in-Charge. | 10 | Each | |
57 | 56 | S&F 150 mm size hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
58 | 57 | S&F 100mm size Hasp & staple safety type aluminium anodized with mild steel hinge pin incl bolt to hing plate and fixed with screws complete all as specified and as directed by Engr-in-Charge. | 20 | Each | |
59 | 58 | S&F Tubular towel rail Chromium Plated Brass, 20 mm dia , 60cm long between flanges complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
60 | 59 | S&F SS chromium plated brackets for curtain rod including finial/latto for curtain road, complete all as specified and as directed by Engr-in-Charge. | 35 | Pair | |
61 | 60 | S&F Door closer aluminium (extruded section) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed, complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
62 | 61 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-Charge. | 51 | Sqm | |
63 | 62 | As per item No 61.00 but fixed in repairs | 5 | Sqm | |
64 | 63 | S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe-290, Gde E-165 complete all as specified and as directed by Engr-in-Charge. | 10 | Kg | |
65 | 64 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and as directed by Engr-in-Charge. | 55 | Kgs | |
66 | 65 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge. | 3450 | Kg | |
67 | 66 | All as per item No 65.00 but 6mm dia to 8mm dia. complete all as specified and as directed by Engr-in-Charge. | 75 | Kg | |
68 | 67 | All as per item No 66.00, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders | 400 | Kg | |
69 | 68 | M & L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) Quality A, complete all as specified and as directed by Engr-in-Charge. | 280 | Kg | |
70 | 69 | S&F Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge. | 30 | KG | |
71 | 70 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-charge. | 20 | Sqm | |
72 | 71 | S&F Powder coated aluminium anodised frame for windows with one or more rebate including jointing clit for fixing frame/chowkhat of window portion including sliding shutters JINDAL section code (frame 20831) , shutter (20846) including glazing with 5mm thick glass necessary fittings rubber packing, suitable handles rollers for shutters etc including all taxes complete all as specified and as directed by Engr-in-Charge. | 20 | Sqm | |
73 | 72 | S&F Fibre glass reinforced translucent plain sheet with side lap fixed with coach screw and washer in ridges of roof, wall etc complete all as specified and as directed by Engr-in-Charge. | 40 | Sqm | |
74 | 73 | M&L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and as directed by Engr-in-Charge. | 20 | Sqm | |
75 | 74 | M&L 18mm thick block boards, grade1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge. | 28 | Sqm | |
76 | 75 | S&F 20mm prelaminated particle board, interior grade, prelaminated one side with decortive choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge. | 5 | Sqm | |
77 | 76 | M&L 75mm thick Plain Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement. complete all as specified and as directed by Engr-in-Charge. | 25 | Sqm | |
78 | 77 | M&L 100mm thick Plain Cement concrete1:2:4 , type B-1 (using 20mm graded stone aggregate) as in floors laid in bays and form work if any complete all as specified and as directed by Engr-in-Charge. | 25 | Sqm | |
79 | 78 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises | 428 | Sqm | |
80 | 79 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in coloured cement to match complete all as specified and as directed by Engr-in-Charge. | 25 | Sqm | |
81 | 80 | M&L Non - skid joint free coloured ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in coloured cement to match, complete all as specified and as directed by Engr-in-Charge. | 50 | Sqm | |
82 | 81 | All as per item No 80.00 above here-in-before but in skirting/dado or verticle surfaces laid over cement screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge. | 8 | Sqm | |
83 | 82 | M&L Glazed coloured ceramic tiles in verticle surfaces 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer 10mm thick 1:4 complete all as specified and as directed by Engr-in-Charge. | 120 | Sqm | |
84 | 83 | M&L Kota Stone slab 20-25 mm thick in riser of steps, skirting, landing, dado and pillar etc. laid over cement screed bed 15mm thick 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. | 10 | Sqm | |
85 | 84 | M&L Double Charged Vitrified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , complete all as specified and as directed by Engr-in-Charge. | 190 | Sqm | |
86 | 85 | All as per item No 84 .00 but over screed bed or bedding layer 10mm thick 1:4 on vertical surfaces/skirting complete all as specified and as directed by Engr-in-Charge. | 20 | Sqm | |
87 | 86 | M&L 15mm thick Renderingon fair face of stone work or concrete surfaces in CM(1:4) mixed with integral water proofing compound as per manufactures instruction, on roof slab surfaces finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. \nNote:- Water proofing compound shall be measured and paid separately | 565 | Sqm | |
88 | 87 | M&L 10mm thick Rendering on fair face of stone work or concrete surfaces in CM 1:6 finished even and smooth wiithout using extra cement, complete all as specified and as directed by Engr-in-Charge. | 450 | Sqm | |
89 | 88 | M&L 5mm thick Rendering on fair face of stone work or concrete surfaces in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on ceiling in any height complete all as specified and directed. | 230 | Sqm | |
90 | 89 | Taking down cement plaster from brick walls including racking out joints scrubbing down with water etc to receive the plaster. | 1245 | Sqm | |
91 | 90 | M&L Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge. | 565 | Sqm | |
92 | 91 | M&L Complete removal of existing treatment and applying two coat of cement base paint over a coat of primer on walls, white or tinted (of approved shade) complete all as specified and as directed by Engr-in-Charge. | 200 | Sqm | |
93 | 92 | M&L Applying two coat OBD on new surfaces of wall over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge. | 350 | Sqm | |
94 | 93 | M&L Complete removal of existing treatment and applying two coat OBD over a coat of chalk white primer, including preparation surface complete all as specified and as directed by Engr-in-Charge. | 200 | Sqm | |
95 | 94 | M&L Applying two coat OBD on new surfaces of ceiling over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge. | 100 | Sqm | |
96 | 95 | M&L Applying two coat of white wash on new plastered surfaces of wall including preparation surface complete all as specified and as directed by Engr-in-Charge. | 130 | Sqm | |
97 | 96 | M&L Complete removal of existing treatment and applying two coat of white wash on old plastered surfaces of wall including preparation surface complete all as specified and as directed by Engr-in-Charge. | 300 | Sqm | |
98 | 97 | M&L Applying two coat of white wash on new plastered surfaces of ceiling including preparation surface complete all as specified and as directed by Engr-in-Charge. | 100 | Sqm | |
99 | 98 | S&F 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge. | 5 | Sqm | |
100 | 99 | M & L Preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer of approved shade complete all as specified and as directed by Engr-in-Charge. | 300 | Sqm | |
101 | 100 | M&L Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth & applying one coat of synthetic enamel paint of approved shade complete all as specified and as directed by Engr-in-Charge. | 50 | Sqm | |
102 | 101 | M & L Two coat of synthetic enamel paint over a coat of red oxide incl preparation of newly steel surfaces of any description over 10 cm in width or girth complete all as specified and as directed by Engr-in-Charge. | 10 | Sqm | |
103 | 102 | Taking up or down PVC pipes, in any class, 75mm bore (including all fittings) including disconnecting pipes and fittings complete all as specified and as directed by Engr-in-Charge. | 50 | RM | |
104 | 103 | Taking up or down PVC pipes, in any class, 110 mm bore (including all fittings) including disconnecting pipes and fittings complete all as specified and as directed by Engr-in-Charge. | 75 | RM | |
105 | 104 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge. | 65 | RM | |
106 | 105 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge. | 60 | RM | |
107 | 106 | Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge. | 10 | RM | |
108 | 107 | S&F 50mm bore High density polyethylene (HDPE) pipes of pressure rating 6kgf/sq.cm laid in trenches or in any position complete all as specified and as directed by Engr-in-Charge. | 30 | RM | |
109 | 108 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). | 2 | Each | |
110 | 109 | Dismantling water tanks capacity exc 500 and n exc 1000 ltrs and removing to store | 3 | Each | |
111 | 110 | S&F 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in positionall specified in SSR Part-I including provision of 200mm long 50mm bore GI nipples for inlet, outlet, overflow, drain out pipe including provision of check nuts. | 3 | Each | |
112 | 111 | S&F 15mm dia Bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and as directed by Engr-in-Charge in repair. | 1 | Each | |
113 | 112 | S&F 15 mm bore fancy type chromium plated Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge. | 1 | Each | |
114 | 113 | S&F 25 mm bore Gun-metal, gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
115 | 114 | S&F 20 mm bore Gun-metal, gate valves , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
116 | 115 | S&F 15 mm bore Gun-metal, gate valves , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge. | 2 | Each | |
117 | 116 | S&F 20mm dia Ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed (minimum weight- 210 Grams)complete all as specified and as directed by Engr-in-Charge. | 5 | Each | |
118 | 117 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and plastic cleats (minium weight 300 gms) complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
119 | 118 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge. | 24 | Each | |
120 | 119 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of (rates includes for making good disturbed surfaces). complete all as specified and as directed by Engr-in-Charge. | 75 | Rm | |
121 | 120 | All as per item No 119.00, but 75mm bore. | 50 | Rm | |
122 | 121 | S&F 75mm bore PVC (SWR) bends any radius of . complete all as specified and as directed by Engr-in-Charge. | 12 | Each | |
123 | 122 | All as per item No 121.00, but 110mm bore. | 38 | Each | |
124 | 123 | S&F 75mm bore PVC (SWR) branch piece, single(Y) equal or unequal complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
125 | 124 | S&F 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
126 | 125 | S&F 75mm bore PVC(SWR) vent cowl as specified. | 2 | Each | |
127 | 126 | M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. | 8 | Each | |
128 | 127 | S & F Sinks drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
129 | 128 | S&F 10 lit.capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-Charge. | 20 | Each | |
130 | 129 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts & flush pipe etc.) complete all as specified and directed by Engineer-in-Charge | 15 | Each | |
131 | 130 | S&F Vitreous China wash basin, white, flat back, size550 x 400 mm excluding taps, chain and plug and porelain stopper but including waste pipe and brackets etc. complete all as specified and as directed by Engr-in-Charge. | 15 | Each | |
132 | 131 | S&F Plastic seat cover for EWC with flat bottom and cover and mild steel chromium plated or aluminised hinging devices complete all as specified and as directed by Engr-in-Charge. | 15 | Each | |
133 | 132 | S&F Selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with CP brass screwed cup washers complete all as specified and as directed by Engr-in-Charge. | 1 | Each | |
134 | 133 | Supply and laying 16 mm OD CPVC pipes, SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all as per manufacturers recommendations and complete all as specified and as directed by Engr-in-Charge. | 65 | RM | |
135 | 134 | Supply and laying 20mm OD CPVC pipes, SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all as per manufacturers recommendations and complete all as specified and as directed by Engr-in-Charge. | 60 | RM | |
136 | 135 | Supply and laying 25 mm OD CPVC pipes, SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all as per manufacturers recommendations and complete all as specified and as directed by Engr-in-Charge. | 10 | RM | |
137 | 136 | S&F Central Hole Basin Mixer quarter turn with Popup waste system with 450 mm long Braided House etc. Make : Jaquar (Cat pat No CQT-23169B or equivalent as approved by the GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
138 | 137 | S&F Wall Mixer quarter Turn with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges , Make : Jaquar (Cat pat No CQT-23273UPR or equivalent as approved by the GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
139 | 138 | S&F Angular stop cock quarter turn with wall flange, Make : Jaquar (Cat pat No CQT-23059 or equivalent as approved by the GE complete all as specified and as directed by Engr-in-Charge. | 32 | Each | |
140 | 139 | S&F 15mm bore Bib Cock with wall flange quarter turn, Make : Jaquar (Cat pat No ORP-CHR-10037PM or equivalent as approved by the GE complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
141 | 140 | S&F 15 mm bore Hand Shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hok with NRV (Back Flow Preventer) as approved by the GE. Make- Jaquar (Cat Pat No- ALD-CHR-579) or equivalent complete all as specified and as directed by Engr-in-Charge, in repairs. | 8 | Each | |
142 | 141 | S&F WHB of vitreous china counter sunk any size of 440x525x195 including cutting for and pinning in ends of brackets or erecting stand Make -Jaquar (Cat Pat No CNS-WHT-601) complete all as directed and as approved by the GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
143 | 142 | S&F EWC bowl for extended wall hung-WC with soft closing seat cover, size 635 x 365 x 770 including cistern with cistern fittings Make - Jaquar (Cat pat No - CNS-WHT-353S) complete all as specified and directed by GE. complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
144 | 143 | S&F Brass chromium plated swivel shower rose 450mm size including shower arm 450mm Make : Jaquar (Cat Pat No OHS-1989 and SHA-479L600) or equivalent as approved by GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
145 | 144 | S&F Toilet Roll Holder with flap, Make : Jaquar (Cat Pat No AQN-7753) or equivalent as approved by GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
146 | 145 | S&F Soap Dish Polycarbide, Make : Jaquar (Cat Pat No AQN-7733) or equivalent as approved by GE complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
147 | 146 | S&F Cabinet Mirror 400 x 500 mm, Make : Prayag (Cat Pat No 554) or equivalent as approved by GE complete all as specified and as directed by Engr-in-Charge. | 4 | Each | |
148 | 147 | S&F Kitchen plate rack of stainless steel 1.00 mm thick of size 90 x 90 cm with suitable shelves/rack complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
149 | 148 | Demolition for Brickwork or stone/boulder masonry, build in cement or lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-Charge. | 31 | Cum | |
150 | 149 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. | 39 | Cum | |
151 | 150 | Separating, scraping and cleaning of reinforcement complete all as specified and as directed by Engr-in-Charge. | 2 | Qtl | |
152 | 151 | M&L Demolition of cement concrete (unreinforced) in ground floor and paving not exc.15cm thickness below or above ground level. | 10 | Cum | |
153 | 152 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed | 0.8 | Qtl | |
154 | 153 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering | 20 | Sqm | |
155 | 154 | M&L Complete removal of existing APP membrane and providing APP based membrane course roof treatment in layers with following provisions:- \n(i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.3KG/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely.\n(ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method.\n(iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface.\n | 340 | Sqm | |
156 | 155 | M&L Anodised aluminium grill Weight nexc 3.50 kg per sqm with all fittings & fixture, shape and size as approved complete all as specified and as directed by Engr-in-Charge. | 90 | Kg | |
157 | 156 | S&F Powder coated aluminium anodised frame for windows with one or more rebate including jointing clit for fixing frame/chowkhat of window portion including sliding shutters JINDAL section code (frame 20831) , shutter (20846) including glazing with 5mm thick glass necessary fittings rubber packing, suitable handles rollers for shutters etc including all taxes. complete all as specified and as directed by Engr-in-Charge. | 5 | Sqm | |
158 | 157 | M&L Anodised sliding type window with frame size 60X40X2.00 mm thick and shutter with section bearing bottom 52x18X1.50, top 39.4 x17.7 x1.5mm and sides 39.4 x 17.7 x 1.5mm (suitable for moving over two track fixed over top of frame work, top and side section of size 61.6x31.75x1.5mm and bearing bottom track of size 61.6x31.75x1.5mm incl necessary aluminium jointing cleats,glazing cleats,rubber packing anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels incl all fitting & fixture complete all as specified and as directed by Engr-in-Charge. | 30 | Sqm | |
159 | 158 | S&F Aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 5.5mm to 6.5 mm thick. complete all as specified and as directed by Engr-in-Charge. | 25 | Sqm | |
160 | 159 | S&F Aluminium powder coated curtain rod 25 mm dia coloured, complete all as specified and as directed by Engr-in-Charge. | 60 | RM | |
161 | 160 | M&L Walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified and as directed by Engr-in-Charge. | 26 | Cum | |
162 | 161 | Taking/Dismantling carefully the decayed reinforced cement concrete and cleaning the surface of steel reinforcement and concrete complete all as specified and directed. Applying cement slurry @ 3Kg/sqm to the surface and making good the surface by means of cement concrete (1:2:4) on by CM (1:3) to match the existing surface including necessary formwork and finishing the surface fair even and smooth complete all as specified and as directed by Engr-in-Charge. | 10 | Sqm | |
163 | 162 | M&L Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable, drawn through and including PVC conduit(minimum 20mm dia) ISI Marked, medium weight conduit but shall be increased as per actual site requirement in accordance with Clause 19.125 of SSR Part-I, accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire with metal flush box 1.2 mm thick of suitable size with 2.8mm thick bakelite sheet for mounting of switch and socket, fan reulator etc complete all as specified and as directed by Engr-in-Charge for the following:- | |||
164 | 162.01 | One light/ fan point/ bell point controlled by one way switch. | 27 | Point | |
165 | 162.02 | One 3 pin, 6 Amp, socket outlet on same board | 6 | Point | |
166 | 162.03 | One 3 pin, 6 Amp, socket outlet on independent board | 4 | Point | |
167 | 163 | M&L Point wiring complete with stranded copper conductor 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable, drawn through and including PVC conduit heavy duty grade ISI marked minimum 20 mm dia but shall be increased as per actual site requirement in accordance with Clause 19.125 of SSR Part-I, ISI Marked with wall thickness not less then 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire with metal flush box 1.2 mm thick of suitable size with 2.8mm thick bakelite sheet for mounting of switch and socket,16 Apms on indipendent board with required modules complete all as specified and as directed by Engr-in-Charge. | 6 | Point | |
168 | 164 | M&L Sub main wiring with two single core 4.0 sq mm stranded copper conductor PVC insulated and unsheathed cable ISI marked in existing conduit concealed in wall concealed sub main wiring alongwith including 2.5 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete including taking down of worn old wiring , complete all as specified and as directed by Engr-in-Charge. \nNote:Cost of Cutting, drilling, wall/ ceiling surface included in quoted unit rate. | 30 | Rm | |
169 | 165 | S&F Switch piano, 1 way, 6 Amps, (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. Make: Anchor penta/ Cona/ Leader | 37 | Each | |
170 | 166 | S&F Flush type socket, 6 Amps, 2/3 pin (ISI Marked) complete all as specified and as directed by Engr-in-Charge. Make: Anchor penta/ Cona/ Leader | 10 | Each | |
171 | 167 | S&F Switch socket, 6/16 Amps, 2/3 Pin Combined complete all as specified and as directed by Engr-in-Charge. Make: Anchor penta/ Cona/ Leader | 6 | Each | |
172 | 168 | S&F Fan regulator, 120 Watt, stepped type complete all as specified and as directed by Engr-in-Charge. Make: Anchor penta/ Cona/ Leader | 3 | Each | |
173 | 169 | S&F Ceiling Rose, surface bakelite, 65X17 mm, three terminals complete all as specified and as directed by Engr-in-Charge. Make: Anchor penta/ Cona/ Leader | 27 | Each | |
174 | 170 | S&F20W surface/ wall mounted LES Luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficency long life LED chips, CRI=80(minimum) PF> 95, system luminious efficacy>100, operating voltage 140V-270V including electrical connection with 3 core flexible Cu conductor cable of approximate size from celing rose to LES fiting, complete all as specified and as directed by Engr-in-Charge.\nMake: Bajaj Cat No. BLTRU 20W WH Viva/ Philips Cat No. BN 308C-LES-20S-6500/ Osram Cat No. Luxpower Batten 19WL840 | 20 | Each | |
175 | 171 | Taking down existing point wiring along with acessories complete all as specified and as directed by Engr-in-Charge. \nNote: Making good existing disturbed surfaces deemed to be included in uit rate. | 43 | Point | |
176 | 172 | Taking down Ceiling Fan, painting with Synthetic Enamel Paint by spraying machine including filling cavities with filler, one coat after cleaning all as specified and hanging after repair and connecting with cable | 3 | Each | |
177 | 173 | S&F LED Street Light 35 Watt, IP 65, lumen output not less than 3000lm, high pressure die cast aluminium housing, 140-270V, 50Hz, PF>0.95, including 1.2 meter long 40/50 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamps of FI 40mm X 6mm with bolts, nuts, wahers and conductor to fitting with 3 core, 1 sqmm PVC insulated copper cable from control box to fitting complete all as specified and as directed by Engr-in-Charge. Make: Philips/ Wipro/ GE/Osram\nNote: The quoted rate shall be deemed to be included for painting of clamps with one coat of redoxide paint before fixing. | 4 | Each | |
178 | 174 | S&F DB Single phase and neutral 8 way with standard bus bar, Din bar etc. Double door complete all as specified and as directed by Engr-in-Charge.\n Note: Cost of Cutting and modification deemed to be included in Unit Rate. Make: Legrand / Schneider / Seimens/ ABB | 1 | Each | |
179 | 175 | S&F Isolator, SP 6-40 Amp, 240 Volt, complete all as specified and as directed by Engr-in-Charge. Make: Legrand / Schneider / Seimens/ ABB | 4 | Each | |
180 | 176 | S&F MCB, SPN 63 Amp, 240 Volt, complete all as specified and as directed by Engr-in-Charge. Make: Legrand / Schneider / Seimens/ ABB | 2 | Each | |
181 | 177 | M&L Earthing 150mm bore with galvanised steel pipe electrode, 400mm bore, medium grade, 3 meters long, top edge of GI pipe 15 cm above GL, connected with earthing lead of 25 X 4mm GI strip to the earthing test point and filling of charcoal dust, salt etc and testing on completion, complete all as specified and as directed by Engr-in-Charge. Note: IR value should be less than 5 Ohms | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail