}

Repair To Joinery And Connected Work Of Certain Bldgs And Repair To External/ Internal Plaster Under Age B/R ( P-1 ) At Faridkot Mil Stn, Faridkot Mil Stn-Punjab

Military Engineer Services-MES has published Repair To Joinery And Connected Work Of Certain Bldgs And Repair To External/ Internal Plaster Under Age B/R ( P-1 ) At Faridkot Mil Stn. Submission Date for this Tender is 15-02-2020. Civil Work Tenders in Faridkot Mil Stn Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

23375450
Repair To Joinery And Connected Work Of Certain Bldgs And Repair To External/ Internal Plaster Under Age B/R ( P-1 ) At Faridkot Mil Stn
Open Tender
Indian
Punjab
Faridkot Mil Stn
15-02-2020

Tender Details

Repair To Joinery And Connected Work Of Certain Bldgs And Repair To External/ Internal Plaster Under Age B/R ( P-1 ) At Faridkot Mil Stn

Key Value

Document Fees
INR 500 /-
EMD
INR 60000.0 /-
Tender Value
INR 30 Lakhs /-

BOQ Items

Name of Work: Repair to joinery and connected work of certain Bldgs and Repair to external/ internal plaster under AGE B/R (P-1) at Faridkot Mil Stn
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down cement plaster /wall tiles from brick walls /concrete surfaces of any description including , racking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and directed by Engineer in Charge. 5167 SQM
2 2 M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer in Charge. 200 Sqm
3 3 M&L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer in Charge. 70 Sqm
4 4 M&L for rough cast over rendering of 10mm thick on fair faces of brick or concrete surfaces as in CM 1:4 complete all as specified and directed by Engineer in Charge.\nNote : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat. 4847 Sqm
5 5 M&L Rendering 5 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed by Engr -in - charge. 50 Sqm
6 6 Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed by Engineer in Charge. 2 Cum
7 7 M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 2 Cum
8 8 M&L preparation of newly plastered surfaces of walls etc. and applying two coats of cement base paint over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed by Engineer in Charge. 200 SQM
9 9 M&L preparation of newly rough cast plastered surfaces of walls etc. and applying two coats of cement base paint over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed by Engineer in Charge. 4847 SQM
10 10 M&L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening complete all as specified and directed by Engineer in Charge. 50 SQM
11 11 M&L Preparation of new surfaces plastered or unplastered and applying three coat of white wash on wall complete all as specified and directed by Engr -in - charge. 20 SQM
12 12 M&L Preparation of new surfaces plastered or unplastered and applying three coat of white wash on ceiling complete all as specified and directed by Engr -in - charge. 50 SQM
13 13 Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes of appropriate size in brick / concrete surfaces for insertion of PCC block for hold fasts complete all as specified & directed by Engineer-in- charge. 48 Each
14 14 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each including cutting holes of appropriate size in brick / concrete surfaces for insertion of PCC block for hold fasts complete all as specified and directed by Engineer-in- charge. 44 Each
15 15 Taking down shutters of any description wooden/aluminium exc 1 sqm and n. exc 2 sqm each complete all as specified and directed by Engineer in Charge. 34 Per Leaf
16 16 Taking down shutters of any description wooden/aluminium exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after easing, adjusting and replacement of minor nails etc complete all as specified and directed by Engineer in Charge. 20 Per Leaf
17 17 S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.25mm thick with girth of frame 185mm including necessary MS rawl plugs and fixing 75mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-Charge. 87.5 RM
18 18 S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one No. Of locking arrangement etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engineer-in-Charge. Note : (i) Measurement of door shutter shallbe taken as exact size of cup board opening (excluding frame and folded / turned up portion). (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engineer-in-Charge shall be provided to each leaf. Cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement / payment shall be made for the same) 25 SQM
19 19 S & F locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100mm (Make : Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods made out of 10mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25mm thick all as specified and directed by Engineer in Charge.\n 18 Each
20 20 M&L for pressed steel sheet frame (1.25 mm sheet thickness) for door of size 105mm x 60mm with one or more rebates including necessary fixing arrangement such as lugs, hinges, lock strike plate etc including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. 127.5 RM
21 21 M & L for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. 25.5 RM
22 22 M&L for 2nd class hard wood Transomes or mullions, straight,for solid frames of any description,wrought, framed, double rebated on the solid, rounded or chamfered (including weathering to transome,if required put together with glue,pinned at joints), supplied and fixed complete all as specified and directed by Engineer-in-Charge. 0.3 Cum
23 23 M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of pressed steeel frames, bed blocks, fixing of hold fast blocks etc including necessary form work complete all as specified and directed by Engineer-in-Charge. 0.8 Cum
24 24 S&F solid PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube in opening as per specification and drawings mentioned in MES schedule complete all as specified & directed. 79.2 RM
25 25 S&F Factory made solid PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. 32 SQM
26 26 S&F 35mm thick, factory made plain framed panelled (two number of panels) shutters of 2nd class hard wood with lock rail and panel inserts of 9mm thick BWP commercial ply or 12mm thick veneered particle board flat pressed three layered conforming to IS-3097 exterior grade-I type- I duly ISI marked general purpose commercial veneered on both side bonded with (BWR) type phenol formaldeyde synthetic resin-adhesive, the size of rails and styles as per IS-1003 Part-I, Kiln seasoned and chemically pressure treated complete all as specified & directed by Engineer-in-Charge \nNote :- The species of timber shall be Hollock/Bonsum 30.4 SQM
27 27 S & F 35mm thick factory made glazed and skeleton shutters confirming to IS-1003(Part-I) of 2nd class hard wood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. Sizes of members as specified in SSR Part-I, Section -8,clause- 8.24 (a) and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge. 22.8 SQM
28 28 M & L for Preparation of new or previously untreated wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge. 116 SQM
29 29 S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm complete all as specified and directed by Engineer-in-Charge. 18 Sqm
30 30 S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm complete all as specified and directed by Engineer-in-Charge. 90 Sqm
31 31 S&F 300mm mild steel, ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and directed by Engineer in Charge. 12 Each
32 32 S&F in repair 300mm mild steel, ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and directed by Engineer in Charge. 40 Each
33 33 S&F 250 mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified & directed by Engineer-in- charge. 36 Each
34 34 S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer in Charge. 100 Each
35 35 S&F in repair aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer in Charge. 120 Each
36 36 Supply and fixing 150 mm long aluminium handles, fabricated type, anodised complete all as specified and directed by Engineer in Charge. 100 Each
37 37 Supply and fixing in repair 150 mm long aluminium handles, fabricated type, anodised complete all as specified and directed by Engineer in Charge. 120 Each
38 38 S& F 100mm long butt hinges medium weight cold rolled mild steel (ISI marked) fixed with screws complete all as specified and directed by Engineer in Charge. 150 Each
39 39 S& F in repair 100mm long butt hinges medium weight cold rolled mild steel (ISI marked) fixed with screws complete all as specified and directed by Engineer in Charge. 90 Each
40 40 S& F in repair 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 (ISI marked) fixed with screw complete all as specified and directed by Engineer in Charge. 50 Each
41 41 S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring,fixed in floor complete all as specified & directed. 100 Each
42 42 S&F brass mortice lock, 100mm mortice latch with two lever (vertical type) of brass body and fixed complete all as specified and directed by Engineer-in-Charge. 40 Each
43 43 S&F aluminium powder coated of any colour glazing/door frame & shutter made out of aluminium anodised section 100x45x1.5mm for chowkats or frame & shutters made of size 100x45x1.5mm for side rails, top rails & middle/ lock rail & 200x45x1.5mm or two pieces of 100x45x1.5mm for bottom rail to made bottom rail 200mm high with and including 5mm thick sheet glass tinted selected quality fixed with and including rubber gasket & aluminium beeds 20mm size ( fixed or openable type ) with and including required Nos of pivots and brass mortice lock (four levers) and two Nos of keys complete all as specified and directed by Engr-in-Charge. 18 SQM
44 44 S and F door closer hydraulically regulated, Aluminium (Aluminium body), designation No 3, universal type suitable for door shutter 1000mm to 1200mm width and weight between 60 to 80 kg complete all as specified and directed by Engineer in Charge. 3 Each
45 45 S and F door closer hydraulically regulated, Aluminium (Aluminium body), designation No 2, universal type suitable for door shutter 700mm to 850mm width and weight between 36 to 60 kg complete all as specified and directed by Engineer in Charge. 6 Each
46 46 S and F in repair door closer hydraulically regulated, Aluminium (Aluminium body), designation No 3, universal type suitable for door shutter 1000mm to 1200mm width and weight between 60 to 80 kg complete all as specified and directed by Engineer in Charge. 10 Each
47 47 S and F in repair door closer hydraulically regulated, Aluminium (Aluminium body), designation No 2, universal type suitable for door shutter 700mm to 850mm width and weight between 36 to 60 kg complete all as specified and directed by Engineer in Charge. 20 Each
48 48 S&F aluminium powder coated of any colour glazing/window frame & shutter made out of aluminium anodised section 45x45x1.5mm for chowkats or frame & shutters made of size 45x45x1.5mm for side rails, top rails & middle/ lock rail including 5mm thick sheet glass tinted selected quality fixed with and including rubber gasket & aluminium beeds 20mm size (openable type) with and including required two Nos. of 100mm long aluminium hinges complete all as specified and directed by Engr-in-Charge. 9 SQM
49 49 S&F powder coated Aluminum Grill diamond shape of mini 5 to 6mm dia fixed on aluminium window frame by using clips, screws & snap beading complete all as specified and directed. 9 SQM
50 50 S&F factory made steel window with side hung shutters including box type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete with glazing bars dovetailed or welded complete all as specified and directed by Engineer-in-Charge. 12.96 SQM
51 51 S&F factory made steel window with side hung shutters including box type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete without glazing bars dovetailed or welded complete all as specified and directed by Engineer-in-Charge. 12.96 SQM
52 52 S&F Factory made box type mild steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer ready for wire mesh/glass pane fixing complete all as specified and directed by Engineer-in-Charge. 3 SQM
53 53 M&L 3 mm thick, plain sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer in Charge. 11 Sqm
54 54 M&L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamal paint complete all as specified and directed by Engineer in Charge. 999.1 Sqm
55 55 S&F stainless steel plate rack 1.25mm thick of size 900 x 775 x 250mm including angle iron brackets, taking down of 19 mm thick particle board shelf and removal from site complete all as specified and directed by Engineer in Charge. 3 Each
56 56 Supply and fixing in repair PVC coated mild steel curtain rod fancy type 20 mm bore with fixing brackets, stops, rollers etc. complete all as specified and directed. 100 RM
57 57 S & F in repair hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer in Charge. 20 Each
58 58 S&F Cast iron / mild steel hat pegs, solid body 125mm to 175mm long complete all as specified and directed. 20 Each
59 59 Repair to steel door, window, ventilator or any welding size length exc 2.5cm but not exc 5cm thick complete all as specified and directed by Engineer-in-Charge. 60 Each
60 60 Taking down carefully unserviceable / old rolling shutter of upto 15 sqm, manual / gear operative type, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth /easy functional, including supply and fix new nuts and bolts of existing size by removing old rusted nuts and bolts, necessary welding whereever required, as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work and also including making good to any damanged to brick / concrete works complete all as specified and directed by Engineer-in-Charge.\nNote : Repalcement of parts & labour shall be paid separately. 10 Each
61 61 Taking down carefully unserviceable / old rolling shutter of exc 15 sqm and not exceeding 30 sqm, manual / gear operative type, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth /easy functional, including supply and fix new nuts and bolts of existing size by removing old rusted nuts and bolts, necessary welding whereever required, as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work and also including making good to any damanged to brick / concrete works complete all as specified and directed by Engineer-in-Charge.\nNote : Repalcement of parts & labour shall be paid separately. 7 Each
62 62 Taking down unserviceable broken/ rusted rolling shutter of size n.exc 30 sqm and removing from site complete all as specified and directed by Engineer-in-Charge. 4 Each
63 63 S & F Steel rolling shutter, 1mm thick without ball bearing, as specified including top cover, anchoring rod, hasp and staple, bracket plates, clamps, pully, spring, shaft, hold fast, stopper, pulling hook and other allied parts complete and one shop coat of primer; erected in position as indicated, with gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge. 112 SQM
64 64 S & F in repair hood covers made out of MS sheets 1.00m thick including bending the sheet to the required shape and fixing the same to the rolling shutter bracket plate complete all as specified and directed by Engineer-in-Charge. 6.75 SQM
65 65 S & F safety lever lock mild steel with 4 levers for rolling shutter complete all as specified and directed by Engineer-in-Charge. 8 Each
66 66 S & F in repair MS gear box assembly (with MS rod and handle) complete including connecting and fixing the gear box to wall with 4 Nos. hexagonal bolts of 10mm dia and 100mm long complete including cutting into existing wall / pillar of brick work / RCC and filling back with PCC complete all as specified and directed by Engineer-in-Charge. 2 Each
67 67 S & F in repair MS pulley for 40/50mm or as per dia of existing shaft pipe for rolling shutter complete all as specified and directed by Engineer-in-Charge. 5 Each
68 68 S & F in repair MS gear handle for gear operated rolling shutter complete all as specified and directed by Engineer-in-Charge. 5 Each
69 69 S & F in repair MS Helical wire springs (conforming to IS-6248-1970) for rolling shutter of size upto 30 sqm complete all as specified and directed by Engineer-in-Charge. 12 Each
70 70 S & F in repair interlocking lath section formed from rolled MS strips for rolling shutter (of existing width) 1.00mm thick complete all as specified and directed by Engineer-in-Charge. 5 SQM
71 71 Taking down of shutter of any description not exceeding 1 sqm each complete all as specified and directed by Engineer-in-Charge. 111 Per Leaf
72 72 S&F 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping / frame and other face balancing white lamination to match complete all as specified and directed by Engineer in Charge. 26 SQM
73 73 Dismantling timber scantling framed work in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position complete all as specified and directed by Engineer-in-Charge. 117.5 RM
74 74 S and F 2nd class hard wood plain fillets sectional area exc. 13 sqcm but n.exc 25 sqcm, square, rectangular or triangular in section clean sawn secured with nails complete all as specified and directed by Engineer in Charge. 117.5 RM
75 75 Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-Charge. 63 SQM
76 76 Supply and fixing in repair 18/19mm thick particle board interior grade Pre-laminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws to timber frame work complete all as specified and directed by Engineer in Charge. 17 SQM
77 77 Supply and fixing 125 mm long aluminium handles, fabricated type, anodised complete all as specified and directed by Engineer in Charge. 155 Each
78 78 Supply and fixing 30mm width continous piano hinges, mild steel, bright finish or electro galvanised fixed with screws complete all as specified and directed by Engineer in Charge. 64 RM
79 79 Supply and fixing telescopic channel, all bearing sides black powder coated for drawers 500mm long as approved complete all as specified and directed by Engineer in Charge. 64 Each
80 80 Supply and fixing 18-19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engineer in Charge. 46 SQM
81 81 Dismantling of Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed by Engineer-in-charge. 377 SQM
82 82 S & F hollow PVC wall lining interlocking type 7mm thick plain/coloured fitted in to the wall with PVC rawal plug and steel screws including fillets on joints and corners as per manufacturers instruction etc. complete all as specified and directed by Engineer In charge.\nNote:- If any electric fitting (wire, cable, switch board) and fixtures disturbed there will be match and fixed as existing and also new fitting. 277 SQM
83 83 S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge\nNote:- If any minor electric fittings and fixtures disturbed there will be match and fixed as existing. 100 SQM
84 84 S&F 5m thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed by Engineer-in-Charge 255 RM
85 85 Taking down carefully unserviceable/old steel gate of size upto 18 sqm each of any description, denting of various parts, removing bend, cleaning of guide rails, including welding of defected parts of the gate, and refixing the shutter after repair work carried out including one coat of synthetic enamel painting complete all as specified and directed by Engineer in Charge.\nNote :- A Sum of Rs. 15615.50 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 (Schedule of credit) of Tender Documents. 3 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail