}

Construction Of Toilet At 1St Floor International Arrival Hall Area At New Terminal Building At Dr . Babasaheb Ambedkar International Airport , Nagpur . , Nagpur Airport-Maharashtra

Maharashtra Airport Development Co Limited-MADC has published Construction Of Toilet At 1St Floor International Arrival Hall Area At New Terminal Building At Dr . Babasaheb Ambedkar International Airport , Nagpur . . Submission Date for this Tender is 07-02-2020. Toilet Bathroom Tenders in Nagpur Airport Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

23375056
Construction Of Toilet At 1St Floor International Arrival Hall Area At New Terminal Building At Dr . Babasaheb Ambedkar International Airport , Nagpur .
Open Tender
Indian
Maharashtra
Nagpur Airport
07-02-2020

Tender Details

Construction Of Toilet At 1St Floor International Arrival Hall Area At New Terminal Building At Dr . Babasaheb Ambedkar International Airport , Nagpur .

Key Value

Document Fees
INR 3540 /-
EMD
INR 33218.0 /-
Tender Value
INR 16.60 Lakhs /-

BOQ Items

Name of Work: Construction of toilets at 1st floor International Arrival Hall Area at New Terminal Building at Dr. Babasaheb Ambedkar International Airport Nagpur. year (2020-21)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing second class burnt brick masonary with conventional /IS type brick in cement mortar 1:6 in superstructure including striking joint, raking out joint, watering and scaffolding etc complete. \n 28.32 Cum
2 2 Providing second class burnt brick masonary with conventional /IS type brick in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/ 2 hoop iron strip 25mm x 1.6 mm placed at every third course properly bent and bonded at ends scaffolding , racking out joint and watering etc complete. 13.65 Sqm
3 3 Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) 1.96 Cum
4 4 Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B.Masonry and concrete members complete. 223.47 Sqm
5 5 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.100/- including ponding test etc. complete. 48 Sqm
6 6 Providing and laying vitrified matt finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. ( make - johnson - Sezarc decor, sezarc bright, sezar deep) 142 Sqm
7 7 Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete ( make - johnson - breeze GPIS) 48 Sqm
8 8 Providing and fixing in position Partition of polished Kaddappa / Marble / Granite stone of required thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete. 8.25 Sqm
9 9 Providing moulding to granite / Marble / Kota stone including polishing, rounding edges, as required cleaning etc. complete. 19 Rmt
10 10 Providing and fixing in position ultra violet stabilised CPVC plumbing pipe of specified outer diameter of required standard thickness conforming to I.S. 4985 including necessary fittings conforming to I.S. 7834 such as PVC bends, tees, reducers, clamps, plugs etc. including necessary excavation trench filling, necessary drilling holes in walls, slabs etc. and making good the surface complete.(For 10 kg/Sq.cm Pressure) (Prior approval of sample and brand by Ex.Engineer is necessary before use.
11 10.1 20 MM dia 32 Rmt
12 10.2 25 MM dia 32 Rmt
13 10.3 40 MM dia 32 Rmt
14 11 Providing and fixing on walls/ ceiling/floors, medium grade G.I. pipe (type) having embossed ISI Mark on it, of required diameter with screwed sockets, joints, necessary galvanised iron fittings such as sockets,back nuts,elbows, bends, tees, reducers, enlargers, plugs, clamps etc.including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and providing and applying anticorrosive primer and two coats of oil painting, testing, etc.complete.(Prior approval of sample by Ex.Engineer is necessary before use.) for 40 mm dia of pipe 15 Rmt
15 12 Providing and fixing 10 cm Rigid PVC Nahani Trap including PVC grating, bend, connecting piece of P.V.C.pipe of required diameter, pipe up to the outside face of the wall, making good the holes and repairs, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) 16 Nos
16 13 Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) 110 mm 25 Rmt
17 14 Providing and fixing jquar make ONS-WHT-10953BI wall hung European type coloured glazed earthenware W.C PAN size ( 370x490x365mm) with UF Soft Close Slim seat cover and lid with chromium plated KUBIX(JCP-CHR-352415) brass hinges and rubber buffers including UPVC soil and vent pipe upto the outside face of wall, with slim concealed cistern with floor mounting frame(code n JCS-WHT-2400S) with installation kit, including jquar make two way bib cock & health fauset etc complete (Prior approval of sample and brand by Engineer in charge is necessary before use.) 7 Nos
18 15 Providing and fixing Jaquar white Table Top Wash Hand Basin of 610x415x160 mm size ( code no drs-wht-37601) including cold water piller tap with auto closing with wall flange (Square) (code no PRS-CHR-061), bottel trap (code no ALD-CHR-769L),west coupling (code no 705) and necessary pipe connections including UPVC waste pipe and trap upto the out side face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Engineer is necessary before use.) 4 Nos
19 16 Providing and fixing Jaquar urinal pot (Cat no URS-WHT-0704)with Jaguar urinal sensor, automatic flushing cistern (Cat no SNR-51097), with inlet pipe and stop tap, including all accessories testing etc. complete. (Prior approval of sample and brand by Engineer in Charge is necessary before use.) 4 Nos
20 17 Providing and fixing factory made solid core flush door in single leaf 32 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) including Burmah/ superior decorative Indian teak wood frame, approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, wrought iron holdfasts, chromium plated fixtures and fastenings without/with brass mortise lock, chromium plated handles on both sides, stoppers and finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) 4.2 Sqm
21 18 Providing and Fixing Mirror having Size 2.5 m x1.00m including accessiries etc complete (Prior approval of sample and brand by Engineer in Charge is necessary before use.) 2 Nos
22 19 Providing and Fixing Hand Towel Dispenser (Jaquar Make or equivalent) Prior approval of sample and brand by Engineer in Charge is necessary before use. 2 Nos
23 20 Providing and Fixing Hand Dryer (Jaquar or equivalent) Prior approval of sample and brand by Engineer in Charge is necessary before use. 2 Nos
24 21 Providing and Fixing liquid Soap Dispenser (Jaquar Make or equivalent Prior approval of sample and brand by Engineer in Charge is necessary before use. 4 Nos
25 22 Providing and fixing in position double anodised alluminium window/ ventilators of various size, including all accessries etc complete. 1.44 Sqm
26 23 Providing and Fixing Double Coat Hook (jaquar Make code No 35661P or equivalent) Prior approval of sample and brand by Engineer in Charge is necessary before use. 10 Nos
27 24 Providing and Fixing Towel Rack 600mm long with lower Hangers (jaquar Make code No 7781 or equivalent) Prior approval of sample and brand by Engineer in Charge is necessary before use. 2 Nos
28 25 Providing and Fixing Toilet Roll Holder (jaquar Make code No ACN1153 N or equivalent) Prior approval of sample and brand by Engineer in Charge is necessary before use. 6 Nos
29 26 Providing and Fixing Door Closer including all accessries etc complete. (Prior approval l of sample and brand by Engineer in Charge is necessary before use. 2 Nos
30 27 Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kgs/M2 and pull out stength of minimum 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete. 48 Sqm
31 28 Supplying and laying of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing /new surface/ PVC conduit as required.
32 28.1 1 x 1.5 Sq mm\n 240 Rmt
33 28.2 2 x 1.5 Sq mm\n 240 Rmt
34 29 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm FRLS PVC insulator copper conductor single core cable in surface/ medium class PVC conduit, with piano type switch , phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 Sq.mm, FRLS PVC insulated copper conduter single cover cable etc as required. 20 Nos
35 30 Providing and fixing fresh colour cubicles systems MODLE TYPE- TITAN 18mm BOX UP SERIES, thickness of compact laminate :- 18 mm colour of HPL Board single colour, Size of Cubicle :- 900mm (W) x 1550 mm (D) X 2110mm (H) x 610 mm (W) overall height of cubicle : 21000 mm ( including bottom Gap of 100mm) including accessories standard - Merino Make Stainless Steel 304 grade accessories) including all accessories etc complete. a) SS "U" channel, b) SS "F "channel., c) SS top Rail, d) SS coat hook, e) door knob f) hinges etc 7 Nos
36 31 Supply and installation of Ceiling mounted down lighter complete with all accessories, lamp, suitable for LED 18 W, complete as reqd as per approved makes. 12 Nos
37 32 Note:- GST will be reimbursed after producing original document evidences
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail