West Bengal Transport Infrastructure Development Corporation Limited has published In-Wbtidcl-145628-Cw-Rfb Sl-6 Construction / Reconstruction Of Gangway Cum Pontoon Jetty Other Infrastructure Development Works As Per Approved Drawings At Armenian Ghat In Kolkata /And Howrah-Iii In Howrah District On The River Nw-1 . . Submission Date for this Tender is 28-02-2020. Civil Work Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Feb-2020 | Date Corriegendum | Date | 28-02-2020 |
| Name of Work: Construction / Reconstruction of Gangway cum Pontoon Jetty satisfying shipbuilding practice & Statutory authority requirements including RCC /Rail pile, in the tidal condition of the river including yoke staging platform, Link platform and other infrastructure development works as per approved drawings at Armeniun Ferry Ghat , on the river Hoogly (NW1) in the District of Kolkata , at Howrah Jetty No 3 (New) ,on the river Hoogly (NW1) in the District of Howrah. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Armeniun Ferry Ghat | Item1 | ||
| 2 | 2 | Pontoon with all Accessories ( Size - L-30.0 M x B-9.0 M x D-1.5M) | Item2 | ||
| 3 | 2.01 | Provide, supply, testing materials (physical & chemical), design & pepare fabrication drawings, approval / inspection of the same by IWT Surveyor Dte, fabricate with approved electrode (ESAB make or equivalent ) at approved location all steel hull (8.00 mm IS:2062:Grade A& B) with deck fitting, C.I. Fairleads, fix up the longitudinal & vertical fender with best quality Sal wood fender without knots/cracks size 200mm X 200mm with all fitting & fixtures in accordance with approved drawing of pontoon. The fender woods are to be painted with 3 coats of coal tar prior to fix up. Internal structural members, vertical support, deck doubler in accordance with ship building practice & approved drawings. The pontoon will be launched after completion of fabrication and obtaining certificate from appropriate authority.Sand blasting of outer hull & deck with fittings prior to apply initial primer coating under instruction & satisfaction of Engineer-in-charge.The pontoon under water hull has to be painted with 2 coats of anticorrosive zinc chromate red & final 2 coats with shalimar BIPIGUARD (tuff coat) black base paints (Marine Grade) & one coat antifouling paint prior to launching.The pontoon external hull area including deck, fittings & internal void spaces shall be painted with 2-coats Tuffkote Red Oxide Zinc Chromate Primer , final 2 coat BIPIGARD / EPIGARD. Pontoon shall be launched after completion of fabrication, under water hull paintings & obtaining launching permision from Surveyor (IWT Dte) & Fix up the 20 Nos sacrificial anode ( Zn) to be fitted under the pontoon.Fabrication, fixing of deck fittings & paintings of pontoon will be carried out under instruction and satisfaction of Engineer-in-Charge. | Item3 | 1 | Item |
| 4 | 2.02 | After descaling & painting U-2 grade good quality anchor chains of 40.0 mm? - 42.0mm? along with test certificate & joining 'D' shackles shall supply at site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item4 | 330 | M |
| 5 | 2.03 | D' shackle / swivel shall supply & delivered at site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item5 | 8 | Nos. |
| 6 | 2.04 | Supply & delivered at site good quality with or without stock steel anchor of 2.5 to 3.0 MT along with 'D' shackle / swivel shall supply & deliverat site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item6 | 4 | Nos. |
| 7 | 2.05 | Two (2) Nos. R.C.C shore mooring bollards of 1.0 m3 each with 3 nos. rail piles in a 1.0 m3 4.0 mm thick steel box with necessary RCC materials including shuttering shall be constructed at approved location / position on the bank of river under instruction & satisfaction of Engineer-in-Charge. | Item7 | 2 | Nos. |
| 8 | 2.06 | The pontoon along with yoke, gangway, mooring gears fittings / fixtures shall be loaded on board for towing from ship building yard to Jetty installation site. The installation of the Jetty shall be under taken complying with river LWL & HWL, bore tide, Jetty site condition with reference to embakment under instruction & satisfaction of Engineer-in-Charge. | Item8 | 1 | Item |
| 9 | 3 | Structural Steel Gangway. ( Size - L-30.0 M x B-3.5 M x D-2.9 M) | Item9 | ||
| 10 | 3.01 | Provide, supply, testing material (physical & chemical), fabricate with approved electrode (ESAB make or equivalent )as per Ship building practice and approved design & drawings at approved location all steel (IS:2062:Grade A & B) gangway with top & bottom chords, verticals, diagonals, Ford & Aft tie, top & bottom X girders, top & bottom wind bracings, deck wood holdings ISMC & ISA, railings, gussets, bracket and sections joining doublers. Also fabricate yoke rollers resting base, gangway rollers (a bush made of brass to be fit inside the roller and a greasing point to make) and yoke holding brackets, flaps with hinges between gangway & link platform, steps from gangway to pontoon deck.The builder shall supply & fix up as per approved drawing 75.0 mm thick best quality sal wood without knots & cracks for Gangway deck (L: 30.0 m x B: 3.5 m) & steps from Gangway to Pontoon deck. The woods shall be painted with 3 coats of coal tar prior to fixup.Sand Blasting with apply initial priemr coating & Painting, gangway and yoke assemblies with 2-coats Marine Guard anticorrosive Zinc chromate Red & final 3-coats Aluminum.Fabrication of gangway and other fittings & fixtures and painting are to be carried out under instruction & satisfaction of Engineer-in-Charge.The fabricated Gangway will be loaded on pontoon & lashed properly for towing to Jetty installation site under instruction & satisfaction of Engineer-in-Charge. | Item10 | 1 | Item |
| 11 | 3.02 | Manufacture & supply as per approved drawings yoke base (CI grade : 40), forged steel yoke pin with nut, yoke rollers, Gangway rollers with pin (IS : 1875 class IV) & place on board the pontoon for towing to installation site & 4 nos high tensile / HSFG bolts & nuts for yoke base to installation at site (8.8 Gr or 10.9 Gr. as per IS :1367 Part 3&6) under instruction & satisfaction of Engineer-in-Charge. | Item11 | 1 | Set |
| 12 | 3.03 | The Fabricated Gangway shall be loded along with all sundry items such as Anchors, Anchor chains, Yoke with assemblies on the Pontoon & Towing the same to jetty installation sites safely under instruction & satisfaction of Engineer-in-Charge. | Item12 | 1 | Job |
| 13 | 3.04 | The Gangway shall be secured with pontoon bollards with 'D' shakle under instruction & satisfaction of Engineer-in-Charge. | Item13 | 4 | Nos. |
| 14 | 3.05 | The Gangway shall be secured with pontoon bollards with 24.0 mm ? stud link chain under instruction & satisfaction of Engineer-in-Charge. | Item14 | 27.5 | M |
| 15 | 3.06 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light with all accessories ( with post ) all complete at the Gangway & Link pathway 15 W - 20 W with Maximum LUMEN of 24-30 outdoor LED / Solar Street Light under instruction & satisfaction of Engineer-in-charge at the entrance of Gangway, Illumination of jetty, Link platform, Ticket counter with necessary fittings & fixture as per shipbuilding practice under instruction & satisfaction of Engineer-in-Charge. | Item15 | 14 | Nos |
| 16 | 3.07 | Supply installation fitting-fixing and testing including necessary arrangement of erecting with fastners or by holding bracket with M.S. angle by welding, the Jetty sign board depicting the name of the ghat at the both ends of link platform including lighting arrangements (weather proof) with marine grade cable and switch with covered box all complete as per shipbuilding practice under instruction & satisfaction of Engineer-in-charge. | Item16 | 2 | Nos |
| 17 | 3.08 | Supply installation fitting-fixing of grill gate / drop gate maintaining the SOP guide line at the entrance of the Jetty / Gangway all complete under instruction & satisfaction of Engineer-in-charge. | Item17 | 1 | Item |
| 18 | 3.09 | Provide,supply, test (certificate to provide) shall fabricate with approved electrode (ESAB make or equivalent) all steel (IS:2062 Grade A & B) for awaning structure all complete as per design & approved drawings at approved location complying with ship building practice as per IRS/IWT, under instruction & satisfaction of Engineer-in-Charge. | Item18 | 3 | MT |
| 19 | 3.1 | Supplying, fitting & fixing Zn -Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).In Roof:- a) With 0.5 mm thick sheet. | Item19 | 201 | Sqm |
| 20 | 3.11 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete. :300 mm lapping each way. With 0.80 mm sheet. | Item20 | 60 | Mrtre |
| 21 | 3.12 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. aves gutter made of 0.63 mm. sheets.(300mm End lapping)\n225 mm. wide gutter | Item21 | 60 | Mrtre |
| 22 | 3.13 | Supplying, fitting & fixing UPVC A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails including making holes in walls, floor, etc. and cutting trenches in any soil, through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials (span yarn, valamoid / bitumen / M. seal etc.) complete. 110 mm. dia.Pipes. | Item22 | 4 | Nos |
| 23 | 3.14 | Bend 87.5 degree 110 mm. Dia. | Item23 | 4 | Nos |
| 24 | 4 | STRUCTURAL STEEL YOKE STAGING PLATFORM | Item24 | ||
| 25 | 4.01 | Supply & deliver at site rails of 105 lbs (52.10 kg/m) for piling to make staging platform for link pathway / foot bridge staging platform deck vertical post as per drawings under instruction & satisfaction of Engineer-in-charge. | Item25 | 12192 | Kgs |
| 26 | 4.02 | Supply & deliver at site rails of 105 lbs (52.10 kg/m) for piling to hold as shoulder support of vertical rail post of link platform / foot bridge staging platform as per drawings under instruction & satisfaction of Engineer-in-charge. | Item26 | 6773 | Kgs |
| 27 | 4.03 | Driving rails by pile engine set inside the river bed by monkey in all sorts of soil including hoisting and placing piles in position, joining the rails by nuts, bolts & plates, cutting to sizes and making one end pointed, including joining by plates after making holes in rails. driving link platform / foot bridge staging platform vertical post at site in the tidal condition of river from barge / pontoon / boats or from heavy staging as necessary where standing water is involved with necessary equipment & machinery requires including hire and labour charges of necessary appliances and all tools and tackles under instruction & satisfaction of Engineer-in-charge. | Item27 | 206 | Mtrs |
| 28 | 4.04 | Supply & deliver at site different sections / dimensions structural materials / plates / chequered plates / ISMB / ISMC / ISA / pipes / plates flatbar at site for the construction of link platform / foot bridge & 2 Nos. grill gate at the entrance of Gangway, light post, vertical posts, palm plates , pad pieces, yoke roller resting boxes & essential structural works for Staging platform for Link pathway,Yoke Staging platform under instruction & satisfaction of Engineer-in-charge. The work shall be carried out in the tidal condition of river from barge / pontoon / boats as necessary including hire and labour charges of necessary appliances and all tools and tackles. | Item28 | 5205 | kgs |
| 29 | 4.05 | Making joints of rails including different joints of staging platform at site with steel structural materials of different dimension as necessary / fasteners including fitting and fixing of the same in the tidal condition including scaffolding all complete under the instruction and satisfaction of the Engineer-in-Charge. | Item29 | 9 | Set |
| 30 | 4.06 | Different dimensions / sizes good quality M. S. fastners to supply for fixing of structural section for the construction of link platform, yoke staging, passanger shed under instruction & satisfaction of Engineer-in-charge. | Item30 | 250 | kgs |
| 31 | 4.07 | Chipping / scrapping by mechanical means, paintings of structural members of the Foot bridge staging in the tide (low) of river by country boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles.with 2 coats of primer (marine grade) & final 2 coats under instruction & satisfaction of Engineer-in-charge. | Item31 | 305 | M2 |
| 32 | 4.08 | Provide, supply, test (certificate to provide) & fabricate with approved electrode (ESAB make or equivalent ) & the steel (IS :2062 Gr.A & B) Foot Bridge as per design & approved drawings at approved location including hoisting and placing in position with flap plates (chequered) for connecting pathways all complete complying with ship building practice. The work shall be carried out in the tidal condition of river from barge / pontoon / boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles. Arrangements for keeping the footbridges in straight with the C.L. of the proposed jetty as fixed will be done by Survey Instrument / Total Station or any other method under instruction & satisfaction of the Engineer-in-Charge. | Item32 | 2610 | kgs |
| 33 | 4.09 | Chipping / scrapping by mechanical means, paintings of structural members of the Foot bridge in the tide (low) of river by country boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles.with 2 coats of primer (marine grade) & final 2 coats under instruction & satisfaction of Engineer-in-charge. | Item33 | 255 | M2 |
| 34 | 4.1 | Provide, supply, Manufacture & placement of bearing as per approved drawings including certificate to jetty installation site under inspection & instruction of Engineer-in-Charge. | Item34 | 1 | Set |
| 35 | 5 | Survey / Soil Test / Investigation & Preparation of Site Drawing: | Item35 | ||
| 36 | 5.01 | Survey / Soil Test / Investigation & Preparation of Site Drawing after design calculation under instruction & satisfaction of Engineer-in-charge. | Item36 | 1 | Item |
| 37 | 5.02 | Necessary fees for applying to get NOC for construction of the proposed Gangway cum Pontoon jetty from Kolkata Port Trust. | Item37 | 1 | Item |
| 38 | 5.03 | Study on Environmental Impact Assesment (EIA) and Environmental Management Plan (EMP) for submission to Kolkata Port Trust for NOC towards construction of the jetty. | Item38 | 2 | Item |
| 39 | 6 | Installation of the informatory sign board | Item39 | ||
| 40 | 6.01 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). iv) 80 mm x 60 mm rectangular | Item40 | 30 | Each |
| 41 | 7 | Miscellaneous civil works (Bank protection, PA System, CCTV, Toilet & Drinking water facilities etc.) | Item41 | ||
| 42 | 7.001 | Drinking water facilities | Item42 | ||
| 43 | 7.002 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. (f) For depth upto 225 metre. (100 mm dia. boring etc.) For depth more than 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.(i) 50 mm dia. boring etc. upto 150 metre | Item43 | 174 | Rm |
| 44 | 7.003 | (i) 50 mm dia. boring etc. beyond 150 metre | Item44 | 186 | Rm. |
| 45 | 7.004 | (iii) 100 mm dia. boring etc. top enlargement beyond 150 metre | Item45 | 36 | Rm. |
| 46 | 7.005 | Supplying PVC strainer of approved make with adapter \nconforming to I.S.12818 specifications. 50 mm dia. | Item46 | 24 | Rm. |
| 47 | 7.006 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). a) 100 mm dia | Item47 | 36 | Rm. |
| 48 | 7.007 | b) 50 mm dia | Item48 | 280 | Rm. |
| 49 | 7.008 | Supplying, fixing of bail plug of approved quality for 100mm dia MS bore pipe complete in all respect. | Item49 | 1 | Each |
| 50 | 7.009 | Supplying, fixing of G.I pipe 150 mm (as centre guide) of \napproved quality for 100 mm dia MS bore pipe complete in all respect. | Item50 | 7 | Rm. |
| 51 | 7.01 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).Threaded End Cap 150 mm | Item51 | 1 | Each |
| 52 | 7.011 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. | Item52 | 4 | Day |
| 53 | 7.012 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. | Item53 | 2 | Cum. |
| 54 | 7.013 | Geophysical investigation of the aquifer by electro logging system with all tools and plants as necessary including supply of necessary report. | Item54 | 1 | Each |
| 55 | 7.014 | Supplying, fitting and fixing steel cutter piece upto 450 mm long \nwith sockets. A) 75 mm dia. | Item55 | 1 | Each |
| 56 | 7.015 | Supplying, fitting and fixing 15 mm dia. galv. M.S. connecting \nrod with sockets. | Item56 | 40.62 | Rm. |
| 57 | 7.016 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 4000 litre capacity | Item57 | 1 | Each |
| 58 | 7.017 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work - PVC Pipes 32 mm | Item58 | 25 | Metre |
| 59 | 7.018 | 25 mm | Item59 | 35 | Metre |
| 60 | 7.019 | Supplying, fitting and fixing pillar cock of approved make. | Item60 | ||
| 61 | 7.02 | c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). | Item61 | 2 | Each |
| 62 | 7.021 | Supplying, fitting and fixing bib cock or stop cock. (d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). | Item62 | 2 | Each |
| 63 | 7.022 | Supplying, fitting and fixing Waste fittings complete.(i) 32 mm | Item63 | 2 | Each |
| 64 | 7.023 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).\n(vi) 32 mm dia | Item64 | 2 | Each |
| 65 | 7.024 | (vii) 25 mm dia | Item65 | 2 | each |
| 66 | 7.025 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : a) 32 mm nominal bore, vertical | Item66 | 1 | each |
| 67 | 7.026 | Supplying, fitting and fixing S.W. master trap.\n(ii) 225 mm X 225 mm | Item67 | 3 | each |
| 68 | 7.027 | Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange\n | Item68 | 3 | each |
| 69 | 7.028 | Supplying, fitting & fixing of approved brand 15 mm dia. PVC connector(600mm long) with both end coupling nuts & washers, etc. complete in all respects. | Item69 | 4 | nos. |
| 70 | 7.029 | Fitting & fixing of PVC waste pipe to be concealed in wall & floor with necessery specials clamps etc. complete. From bottle trap to floor trap (for basin, sink etc) (length approx. 2000 mm). A) 32mm dia | Item70 | 14 | Rm |
| 71 | 7.03 | Supplying, fitting and fixing special hand pump no. 6 of approved make (for 50 mm or 40 mm dia. tube well). | Item71 | 1 | each |
| 72 | 7.031 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved\nquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (i) 450 mm X 300 mm size | Item72 | 2 | each |
| 73 | 7.032 | Supplying, installing, testing, commissioning of SS submersible pump(75mm) each pump shall have 1.5 HP capacity with coupling, coupling guard & all necessary fittings. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary cables, ancillaries, valves, header (G.I. Tata Heavy) suitable control panel, high & low level controller & accessories including base plate complete as required. | Item73 | 1 | Nos. |
| 74 | 7.033 | Supplying, installing, good quality Aquaguard under instruction & satisfaction of Engineer-in-charge. | Item74 | 1 | Nos. |
| 75 | 7.034 | Installation of C.C.TV. & PA System | Item75 | ||
| 76 | 7.035 | Supply & Installation of 3 MP Bullet Camera (IP) of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item76 | 14 | Nos. |
| 77 | 7.036 | Supply & Installation of 2 MP Dome Camera (IP) of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item77 | 4 | Nos. |
| 78 | 7.037 | Supply & Installation of 16 Port NVR of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item78 | 1 | No. |
| 79 | 7.038 | Supply & Installation of Cable with PVC conduit or placing above false ceiling of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item79 | 5 | Coil |
| 80 | 7.039 | Supply & Installation of 6 TB HDD of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item80 | 1 | No. |
| 81 | 7.04 | Supply & Installation of Spliter, PVC box, RJ45, Cable etc. of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item81 | 1 | Item |
| 82 | 7.041 | Supply, Installation & interconnecting the cameras with 24 port switch including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item82 | 1 | Item |
| 83 | 7.042 | Supply & Installation of good quality LED display 43" including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item83 | 1 | Nos. |
| 84 | 7.043 | Supply & Installation of good quality LAN rack including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item84 | 1 | Item |
| 85 | 7.044 | Supply & Installation interconnecting with Disply, Cameras & NVR for successful operation of the total system all complete as per direction & satisfaction of the Engineer in charge. | Item85 | 1 | Item |
| 86 | 7.045 | Supply, installation of controller Unit (BOSCH PHILIPS) / Amplifier as per direction of E.I.C. | Item86 | 1 | Item |
| 87 | 7.046 | Supply of Wireless hand held vocal microphones featuring high feedbac rejection, mute button for full speech control, syncronixation via RF remote channel frequencies tunable in steps of 25 KHz 24 MHz bandwidth, 8 frequency banks with each max 12 presets as per direction of E.I.C. | Item87 | 2 | Item |
| 88 | 7.047 | Supply & installation of speaker of approved make and brand including necessary arrangement of erecting the box on the post and cable for wiring all complete as per direction of EIC. | Item88 | 20 | Item |
| 89 | 7.048 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light post all complete 50 W outdoor LED Flood Light marine grade for illuminating Pontoon and gangway river end under instruction & satisfaction of Engineer-in-charge. | Item89 | 8 | Item |
| 90 | 7.049 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light all complete 20 W outdoor LED Light marine grade for link platform, passenger shed, toilet block and under instruction & satisfaction of Engineer-in-charge. | Item90 | 30 | Item |
| 91 | 7.05 | Supply, system installation, testing, commissioning including Cables and Accessories with marine grade materials for lighting of the Pontoon jetty and gangway including passenger shed and toilet as per direction and satisfaction of E.I.C. | Item91 | 36 | Item |
| 92 | 7.051 | Bank protection work surrounding the jetty | Item92 | ||
| 93 | 7.052 | Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed.(Diameter of pile to be measured at a distance of 1.5m from the thicker end.)ii) 125 mm diameter . | Item93 | 900 | M |
| 94 | 7.053 | iii) 150 mm diameter . | Item94 | 1200 | M |
| 95 | 7.054 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge.\n(a) Double coat. | Item95 | 525 | Sqm. |
| 96 | 7.055 | Labour for driving Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. ii) 125 mm diameter .\n | Item96 | 500 | M |
| 97 | 7.056 | iii) 150 mm diameter . | Item97 | 900 | M |
| 98 | 7.057 | Supplying, fitting and fixing M.S iron shoe to Jhaw / Eucalyptus bullah piles including necessary cleats, nails etc. complete. \na) For bullahs above 10 cm & up to 20 cm av. Diameter. | Item98 | 225 | Each |
| 99 | 7.058 | Labour for fitting and fixing iron nails half split bullah wailing pieces and cross pieces etc. complete including cost of nails only complete as per direction of the Engineer-in-charge. \nJhaw / Eucalyptus. \nb) Width of thinner ind above 15 cm. | Item99 | 45 | M |
| 100 | 7.059 | Making sausages Square or Rectangular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside with 10 S.W.G. galvanised square pattern (internal dimension of mesh will be 100 m.m. x 100 m.m. square) galvanised wirenet caging with proper lapping of minimum 150 m.m. and sewing with 12 S.W.G galvanised wire including cost of all materials, carriage up to site, placing and laying the same in position, after preparing the bed to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces.) \nc) 0.60 metre x 0.60 metre nominal section | Item100 | 15 | M |
| 101 | 7.06 | i) 0.75 metre x 0.45 metre nominal section | Item101 | 20 | M |
| 102 | 7.061 | k) 0.90 metre x 0.60 metre nominal section | Item102 | 30 | M |
| 103 | 7.062 | Supplying to site and pitching with 1st class kiln burnt or picked jhama bricks including dressing, ramming and preparing bed to proper slope complete with necessary earth work not exceeding 300 m.m. in depth and filling gaps with powdered earth or local sand etc. complete (The rate is including cost of sand). \ni) With 1st class kiln burnt brick \nd) 25.00 cm thick | Item103 | 50 | Sqm. |
| 104 | 7.063 | Supplying, fitting and fixing pieces for rectangular / square / circular asusages at the ends, with 10 SWG / 8 SWG GI wire net of different mesh sizes tying & sewing the same maintaning a lap length of 150 mm all around with 12 SWG GI wire complete, including the cost of supply of wire netting, fitting etc. complete as per direction of the Engineer-in-charge. a) Mesh size 100mm x 100 mm with 10 SWG wire. | Item104 | 225 | Sqm. |
| 105 | 7.064 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates (stone / brick) and sewing as done in case of cement bags, (tying with a knot after filling will nbot be accepted), and stacking within a kead if 30 netre as per direction of Engineer-in-charge (cost is excluding the cost of any types of filling materials). NB: Volume of earth / sand filled bags should not be less than 0.028 cum/bag. | Item105 | 600 | Bag |
| 106 | 7.065 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. | Item106 | 600 | Bag |
| 107 | 7.066 | Providing and laying pre-cast brick block pitching of required size (53 cm. x 53 cm. x 25 cm. or as directed by the Engineer-in-charge) with 1st class kiln burnt bricks in cement mortar including flush pointin on all faces except exposed face which to be plastered with 19 m.m. thick cement plaster, curin, dressing, ramming & preparing subgrade in slopes & bed complete with necessary earth work not exceeding 300 mm in depth with all leads & lifts including cost of all materials / blocks up to site by all means of transport. The gap between adjacent blocks will not be more than 10 m.m. (Sand, cement mortar mix for making blocks, pointing & plastering is 1:4) | Item107 | 92 | Cum. |
| 108 | 7.067 | Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooeen malllet after laying to achieve designed section as per direction of the Engineer-in-charge (measurements will be on finished work / in stack after deducting necessary void).a) Jhama ballast | Item108 | 60 | Cum. |
| 109 | 7.068 | Supplying to site empty cement polythene bags (capacity 50 kg.) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg.) | Item109 | 600 | Each |
| 110 | 7.069 | Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. Silver Sand. Stacked at site. | Item110 | 400 | Cum |
| 111 | 7.07 | Earth work in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. \na) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. | Item111 | 24.84 | Cum. |
| 112 | 7.071 | Upgradation of Ticket counter | Item112 | ||
| 113 | 7.072 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.SAIL/ TATA/RINL | Item113 | 3.3 | M.T. |
| 114 | 7.073 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.\n | Item114 | 20 | Cum. |
| 115 | 7.074 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (A) M 25 Grade. | Item115 | 25 | Cum. |
| 116 | 7.075 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. | Item116 | 10.476 | Cum. |
| 117 | 7.076 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) Steel shuttering or 9 to 12 mm thick\napproved quality ply board shuttering in any concrete work. | Item117 | 70 | Sqm. |
| 118 | 7.077 | Brick work with 1st class bricks in cement mortar (1:4).(a) In superstructure, ground floor. | Item118 | 23 | Cum. |
| 119 | 7.078 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | Item119 | 10 | Cum. |
| 120 | 7.079 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\n(a) With 4 : 1 cement mortar.\n(i) 19 mm thick plaster.\n\n | Item120 | 70 | Sqm. |
| 121 | 7.08 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | Item121 | 50 | Sqm. |
| 122 | 7.081 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Soling or dry pavement with one brick-on-edge laid in herring bone pattern over a layer of brick flat (thickness 125 mm plus 75 mm) | Item122 | 12 | Sqm. |
| 123 | 7.082 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item123 | 20 | SQM. |
| 124 | 7.083 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface: With super gloss (hi-gloss). Two coats ( with any shade except white).\n | Item124 | 25 | SQM. |
| 125 | 7.084 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item125 | 12.24 | SQM. |
| 126 | 7.085 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coats ( with any shade except white) | Item126 | 25 | SQM. |
| 127 | 7.086 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Two Coats.\n | Item127 | 25 | SQM. |
| 128 | 7.087 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:Two coats. | Item128 | 50 | SQM. |
| 129 | 7.088 | Construction of Bio-Toilet (1.3m x 1.3m) with good quality tap and basin for Passengers under instruction & satisfaction of Engineer-in-charge. | Item129 | 2 | Item |
| 130 | 7.089 | Upgradation of Passenger shed, Passenger ammenities etc. | Item130 | ||
| 131 | 7.09 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.SAIL/ TATA/RINL | Item131 | 2 | M.T. |
| 132 | 7.091 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.\n | Item132 | 5 | Cum. |
| 133 | 7.092 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (A) M 25 Grade. | Item133 | 12 | Cum. |
| 134 | 7.093 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n | Item134 | 10 | Cum. |
| 135 | 7.094 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) Steel shuttering or 9 to 12 mm thick\napproved quality ply board shuttering in any concrete work. | Item135 | 44.4 | Sqm. |
| 136 | 7.095 | Brick work with 1st class bricks in cement mortar (1:4).(a) In superstructure, ground floor. | Item136 | 22.65 | Cum. |
| 137 | 7.096 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | Item137 | 15 | Cum. |
| 138 | 7.097 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 4 : 1 cement mortar.(i) 19 mm thick plaster. | Item138 | 60 | Sqm. |
| 139 | 7.098 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | Item139 | 15.05 | Sqm. |
| 140 | 7.099 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Soling or dry pavement with one brick-on-edge laid in herring bone pattern over a layer of brick flat (thickness 125 mm plus 75 mm) | Item140 | 11 | Sqm. |
| 141 | 7.1 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item141 | 20 | SQM. |
| 142 | 7.101 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface: With super gloss (hi-gloss). Two coats ( with any shade except white).\n | Item142 | 20 | SQM. |
| 143 | 7.102 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item143 | 10 | SQM. |
| 144 | 7.103 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coats ( with any shade except white) | Item144 | 10 | SQM. |
| 145 | 7.104 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Two Coats.\n | Item145 | 10 | SQM. |
| 146 | 7.105 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:Two coats. | Item146 | 10 | SQM. |
| 147 | 7.106 | Electrical wiring & fixing of light fitting as per ship building practice, 4(four) nos. flood lights FWD & aft. 25 nos. deck light on Link platform walk way under instruction & satisfaction of engineer-in-charge. i) Wiring | Item147 | 822.4 | M |
| 148 | 7.107 | ii) Flood light | Item148 | 4 | Nos. |
| 149 | 7.108 | iii)Gangway light | Item149 | 40 | Nos. |
| 150 | 8 | Howrah Jetty No 3 (New) Ferry Ghat | Item150 | ||
| 151 | 9 | Pontoon with all Accessories ( Size - L-30.0 M x B-9.0 M x D-1.5M) | Item151 | ||
| 152 | 9.01 | Provide, supply, testing materials (physical & chemical), design & pepare fabrication drawings, approval / inspection of the same by IWT Surveyor Dte, fabricate with approved electrode (ESAB make or equivalent ) at approved location all steel hull (8.00 mm IS:2062:Grade A& B) with deck fitting, C.I. Fairleads, fix up the longitudinal & vertical fender with best quality Sal wood fender without knots/cracks size 200mm X 200mm with all fitting & fixtures in accordance with approved drawing of pontoon. The fender woods are to be painted with 3 coats of coal tar prior to fix up. Internal structural members, vertical support, deck doubler in accordance with ship building practice & approved drawings. The pontoon will be launched after completion of fabrication and obtaining certificate from appropriate authority.Sand blasting of outer hull & deck with fittings prior to apply initial primer coating under instruction & satisfaction of Engineer-in-charge.The pontoon under water hull has to be painted with 2 coats of anticorrosive zinc chromate red & final 2 coats with shalimar BIPIGUARD (tuff coat) black base paints (Marine Grade) & one coat antifouling paint prior to launching.The pontoon external hull area including deck, fittings & internal void spaces shall be painted with 2-coats Tuffkote Red Oxide Zinc Chromate Primer , final 2 coat BIPIGARD / EPIGARD. Pontoon shall be launched after completion of fabrication, under water hull paintings & obtaining launching permision from Surveyor (IWT Dte) & Fix up the 20 Nos sacrificial anode ( Zn) to be fitted under the pontoon.Fabrication, fixing of deck fittings & paintings of pontoon will be carried out under instruction and satisfaction of Engineer-in-Charge. | Item152 | 1 | Item |
| 153 | 9.02 | After descaling & painting U-2 grade good quality anchor chains of 40.0 mm? - 42.0mm? along with test certificate & joining 'D' shackles shall supply at site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item153 | 330 | M |
| 154 | 9.03 | D' shackle / swivel shall supply & delivered at site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item154 | 8 | Nos. |
| 155 | 9.04 | Supply & delivered at site good quality with or without stock steel anchor of 2.5 to 3.0 MT along with 'D' shackle / swivel shall supply & deliverat site for mooring the pontoon at desired location under instruction & satisfaction of Engineer-in-Charge. | Item155 | 4 | Nos. |
| 156 | 9.05 | Two (2) Nos. R.C.C shore mooring bollards of 1.0 m3 each with 3 nos. rail piles in a 1.0 m3 4.0 mm thick steel box with necessary RCC materials including shuttering shall be constructed at approved location / position on the bank of river under instruction & satisfaction of Engineer-in-Charge. | Item156 | 2 | Nos. |
| 157 | 9.06 | The pontoon along with yoke, gangway, mooring gears fittings / fixtures shall be loaded on board for towing from ship building yard to Jetty installation site. The installation of the Jetty shall be under taken complying with river LWL & HWL, bore tide, Jetty site condition with reference to embakment under instruction & satisfaction of Engineer-in-Charge. | Item157 | 1 | Item |
| 158 | 10 | Structural Steel Gangway. ( Size - L-30.0 M x B-3.5 M x D-2.9 M) | Item158 | ||
| 159 | 10.01 | Provide, supply, testing material (physical & chemical), fabricate with approved electrode (ESAB make or equivalent )as per Ship building practice and approved design & drawings at approved location all steel (IS:2062:Grade A & B) gangway with top & bottom chords, verticals, diagonals, Ford & Aft tie, top & bottom X girders, top & bottom wind bracings, deck wood holdings ISMC & ISA, railings, gussets, bracket and sections joining doublers. Also fabricate yoke rollers resting base, gangway rollers (a bush made of brass to be fit inside the roller and a greasing point to make) and yoke holding brackets, flaps with hinges between gangway & link platform, steps from gangway to pontoon deck.The builder shall supply & fix up as per approved drawing 75.0 mm thick best quality sal wood without knots & cracks for Gangway deck (L: 30.0 m x B: 3.5 m) & steps from Gangway to Pontoon deck. The woods shall be painted with 3 coats of coal tar prior to fixup.Sand Blasting with apply initial priemr coating & Painting, gangway and yoke assemblies with 2-coats Marine Guard anticorrosive Zinc chromate Red & final 3-coats Aluminum.Fabrication of gangway and other fittings & fixtures and painting are to be carried out under instruction & satisfaction of Engineer-in-Charge.The fabricated Gangway will be loaded on pontoon & lashed properly for towing to Jetty installation site under instruction & satisfaction of Engineer-in-Charge. | Item159 | 1 | Item |
| 160 | 10.02 | Manufacture & supply as per approved drawings yoke base (CI grade : 40), forged steel yoke pin with nut, yoke rollers, Gangway rollers with pin (IS : 1875 class IV) & place on board the pontoon for towing to installation site & 4 nos high tensile / HSFG bolts & nuts for yoke base to installation at site (8.8 Gr or 10.9 Gr. as per IS :1367 Part 3&6) under instruction & satisfaction of Engineer-in-Charge. | Item160 | 1 | Set |
| 161 | 10.03 | The Fabricated Gangway shall be loded along with all sundry items such as Anchors, Anchor chains, Yoke with assemblies on the Pontoon & Towing the same to jetty installation sites safely under instruction & satisfaction of Engineer-in-Charge. | Item161 | 1 | Job |
| 162 | 10.04 | The Gangway shall be secured with pontoon bollards with 'D' shakle under instruction & satisfaction of Engineer-in-Charge. | Item162 | 4 | Nos. |
| 163 | 10.05 | The Gangway shall be secured with pontoon bollards with 24.0 mm ? stud link chain under instruction & satisfaction of Engineer-in-Charge. | Item163 | 27.5 | M |
| 164 | 10.06 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light with all accessories ( with post ) all complete at the Gangway & Link pathway 15 W - 20 W with Maximum LUMEN of 24-30 outdoor LED / Solar Street Light under instruction & satisfaction of Engineer-in-charge at the entrance of Gangway, Illumination of jetty, Link platform, Ticket counter with necessary fittings & fixture as per shipbuilding practice under instruction & satisfaction of Engineer-in-Charge. | Item164 | 14 | Nos |
| 165 | 10.07 | Supply installation fitting-fixing and testing including necessary arrangement of erecting with fastners or by holding bracket with M.S. angle by welding, the Jetty sign board depicting the name of the ghat at the both ends of link platform including lighting arrangements (weather proof) with marine grade cable and switch with covered box all complete as per shipbuilding practice under instruction & satisfaction of Engineer-in-charge. | Item165 | 2 | Nos |
| 166 | 10.08 | Supply installation fitting-fixing of grill gate / drop gate maintaining the SOP guide line at the entrance of the Jetty / Gangway all complete under instruction & satisfaction of Engineer-in-charge. | Item166 | 1 | Item |
| 167 | 10.09 | Provide,supply, test (certificate to provide) shall fabricate with approved electrode (ESAB make or equivalent) all steel (IS:2062 Grade A & B) for awaning structure all complete as per design & approved drawings at approved location complying with ship building practice as per IRS/IWT, under instruction & satisfaction of Engineer-in-Charge. | Item167 | 3 | MT |
| 168 | 10.1 | Supplying, fitting & fixing Zn -Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).In Roof:- a) With 0.5 mm thick sheet. | Item168 | 201 | Sqm |
| 169 | 10.11 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete. :300 mm lapping each way. With 0.80 mm sheet. | Item169 | 60 | Mrtre |
| 170 | 10.12 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. aves gutter made of 0.63 mm. sheets.(300mm End lapping)\n225 mm. wide gutter | Item170 | 60 | Mrtre |
| 171 | 10.13 | Supplying, fitting & fixing UPVC A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails including making holes in walls, floor, etc. and cutting trenches in any soil, through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials (span yarn, valamoid / bitumen / M. seal etc.) complete. 110 mm. dia.Pipes. | Item171 | 4 | Nos |
| 172 | 10.14 | Bend 87.5 degree 110 mm. Dia. | Item172 | 4 | Nos |
| 173 | 11 | Structural steel Foot Bridge on Staging platform, Link platform,Yoke Staging platform | Item173 | ||
| 174 | 11.01 | Supply & deliver at site rails of 105 lbs (52.10 kg/m) for piling to make staging platform for link pathway / foot bridge staging platform deck vertical post as per drawings under instruction & satisfaction of Engineer-in-charge. | Item174 | 109723 | kgs |
| 175 | 11.02 | Supply & deliver at site rails of 105 lbs (52.10 kg/m) for piling to hold as shoulder support of vertical rail post of link platform / foot bridge staging platform as per drawings under instruction & satisfaction of Engineer-in-charge. | Item175 | 60957 | kgs |
| 176 | 11.03 | Driving rails by pile engine set inside the river bed by monkey in all sorts of soil including hoisting and placing piles in position, joining the rails by nuts, bolts & plates, cutting to sizes and making one end pointed, including joining by plates after making holes in rails. driving link platform / foot bridge staging platform vertical post at site in the tidal condition of river from barge / pontoon / boats or from heavy staging as necessary where standing water is involved with necessary equipment & machinery requires including hire and labour charges of necessary appliances and all tools and tackles under instruction & satisfaction of Engineer-in-charge. | Item176 | 1854 | Mtrs |
| 177 | 11.04 | Supply & deliver at site different sections / dimensions structural materials / plates / chequered plates / ISMB / ISMC / ISA / pipes / plates flatbar at site for the construction of link platform / foot bridge & 2 Nos. grill gate at the entrance of Gangway, light post, roof truss, vertical posts, palm plates , pad pieces, yoke roller resting boxes & essential structural works for Staging platform for Link pathway,Yoke Staging platform under instruction & satisfaction of Engineer-in-charge. The work shall be carried out in the tidal condition of river from barge / pontoon / boats as necessary including hire and labour charges of necessary appliances and all tools and tackles. | Item177 | 48142 | kgs |
| 178 | 11.05 | Making joints of rails including different joints of staging platform at site with steel structural materials of different dimension as necessary / fasteners including fitting and fixing of the same in the tidal condition including scaffolding all complete under the instruction and satisfaction of the Engineer-in-Charge. | Item178 | 162 | Set |
| 179 | 11.06 | Different dimensions / sizes good quality M. S. fastners to supply for fixing of structural section for the construction of link platform, yoke staging, passanger shed under instruction & satisfaction of Engineer-in-charge. | Item179 | 1200 | kgs |
| 180 | 11.07 | Chipping / scrapping by mechanical means, paintings of structural members of the Foot bridge staging (Lower portion) in the tide (low) of river by country boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles.with 2 coats of primer (marine grade) & final 2 coats under instruction & satisfaction of Engineer-in-charge. | Item180 | 2643 | M2 |
| 181 | 11.08 | Provide, supply, test (certificate to provide) & fabricate with approved electrode(ESAB make or equivalent) the steel (IS :2062 Gr. A & B) Foot Bridge as per design & approved drawings at approved location including hoisting and placing in position with flap plates (chequered) for connecting pathways all complete complying with ship building practice. The work shall be carried out in the tidal condition of river from barge / pontoon / boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles. Arrangements for keeping the footbridges in straight with the C.L. of the proposed jetty as fixed will be done by Survey Instrument / Total Station or any other method under instruction & satisfaction of the Engineer-in-Charge. | Item181 | 54140 | kgs |
| 182 | 11.09 | Chipping / scrapping by mechanical means, paintings of structural members of the Foot bridge (Upper portion) in the tide (low) of river by country boats as necessary where standing water is involved including hire and labour charges of necessary appliances and all tools and tackles.with 2 coats of primer (marine grade) & final 2 coats under instruction & satisfaction of Engineer-in-charge. | Item182 | 996 | M2 |
| 183 | 11.1 | Provide, supply, Manufacture & placement of bearing as per approved drawings including certificate to jetty installation site under inspection & instruction of Engineer-in-Charge. | Item183 | 20 | Set |
| 184 | 11.11 | Loading / unloading including positioning over the staging platform on rail piles, the fabricated Foot Bridge along with all sundry items with the help of Pontoon / barge & Towing by tug boat / launches the same to jetty installation sites in the C.L. of the jetty shown. The straight line & level should be maintained with the help making arrangements of fixing the piano wire along the C.L. by Survey Instrument / Total Station or any other method under instruction & satisfaction of Engineer-in-Charge. | Item184 | 5 | Job |
| 185 | 11.12 | Electrical wiring & fixing of light fitting as per ship building practice, 4(four) nos. flood lights FWD & aft. 25 nos. deck light on Link platform walk way under instruction & satisfaction of engineer-in-charge. i) Wiring | Item185 | 400 | M |
| 186 | 11.13 | ii) Flood light | Item186 | 4 | Nos. |
| 187 | 11.14 | iii)Gangway light | Item187 | 25 | Nos. |
| 188 | 11.15 | Dismantiling the existing connecting pathway over the pontoon and refinshing the same after reconstruction as per instruction & satisfaction of Engineer-in-Charge. | Item188 | 1 | Job |
| 189 | 12 | LINK PLATFORM & PASSENGER SHED | Item189 | ||
| 190 | 12.01 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. | Item190 | 8 | Cum. |
| 191 | 12.02 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (a) Pakur Variety. | Item191 | 9 | Cum. |
| 192 | 12.03 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. | Item192 | 20 | Sqm. |
| 193 | 12.04 | Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor | Item193 | 7 | Cum. |
| 194 | 12.05 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement.35 mm. thick. | Item194 | 90 | Sqm. |
| 195 | 12.06 | Supply of Recron 3S @ 125 gm. / one bag of cement for concreting work (product of Reliance Industries). | Item195 | 60 | Bag |
| 196 | 12.07 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, aulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) i) For roof truss works a) Span up to 12 Mtr | Item196 | 17 | MT. |
| 197 | 12.08 | Supplying, fitting & fixing Zn -Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).\n(i) In Roof:- a) With 0.5 mm thick sheet. | Item197 | 270 | Sqm. |
| 198 | 12.09 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete. :300 mm lapping each way.\n(a) With 0.80 mm sheet. | Item198 | 75 | Metre |
| 199 | 12.1 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. aves gutter made of 0.63 mm. sheets.(300mm End lapping)\n(b) 300 mm. wide gutter | Item199 | 150 | Metre |
| 200 | 12.11 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. | Item200 | 250 | SQM. |
| 201 | 12.12 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item201 | 250 | SQM. |
| 202 | 12.13 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface: With super gloss (hi-gloss). Two coats ( with any shade except white). | Item202 | 365 | SQM. |
| 203 | 12.14 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) One Coat. Water based interior grade Acrylic Primer. | Item203 | 200 | SQM. |
| 204 | 12.15 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.Two Coats | Item204 | 200 | SQM. |
| 205 | 12.16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 1:4 cement mortar. (i) 20 mm thick plaster. | Item205 | 120 | Sqm. |
| 206 | 12.17 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | Item206 | 50 | Sqm. |
| 207 | 12.18 | Supplying, fitting & fixing UPVC A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails including making holes in walls, floor, etc. and cutting trenches in any soil, through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials (span yarn, valamoid / bitumen / M. seal etc.) complete. (i) 110 mm. dia.Pipes. | Item207 | 70 | Mtr |
| 208 | 12.19 | Supplying, fitting & fixing UPVC A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails including making holes in walls, floor, etc. and cutting trenches in any soil, through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials (span yarn, valamoid / bitumen / M. seal etc.) complete. c) Bend 87.5 degree (i) 110 mm. dia.Pipes. | Item208 | 40 | Mtr |
| 209 | 13 | Survey / Soil Test / Investigation & Preparation of Site Drawing: | Item209 | ||
| 210 | 13.01 | Survey / Soil Test / Investigation & Preparation of Site Drawing after design calculation under instruction & satisfaction of Engineer-in-charge. | Item210 | 1 | Item |
| 211 | 13.02 | Necessary fees for applying to get NOC for construction of the proposed Gangway cum Pontoon jetty from Kolkata Port Trust. | Item211 | 1 | Item |
| 212 | 13.03 | Study on Environmental Impact Assesment (EIA) and Environmental Management Plan (EMP) for submission to Kolkata Port Trust for NOC towards construction of the jetty. | Item212 | 2 | Item |
| 213 | 14 | Installation of the informatory sign board | Item213 | ||
| 214 | 14.01 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). iv) 80 mm x 60 mm rectangular | Item214 | 30 | Each |
| 215 | 15 | Miscellaneous civil works (Bank protection, PA System, CCTV, Toilet & Drinking water facilities etc.) | Item215 | ||
| 216 | 15.001 | Drinking water facilities | Item216 | ||
| 217 | 15.002 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. (f) For depth upto 225 metre. (100 mm dia. boring etc.) For depth more than 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.(i) 50 mm dia. boring etc. upto 150 metre | Item217 | 174 | Rm |
| 218 | 15.003 | (i) 50 mm dia. boring etc. beyond 150 metre | Item218 | 186 | Rm. |
| 219 | 15.004 | (iii) 100 mm dia. boring etc. top enlargement beyond 150 metre | Item219 | 36 | Rm. |
| 220 | 15.005 | Supplying PVC strainer of approved make with adapter \nconforming to I.S.12818 specifications. 50 mm dia. | Item220 | 24 | Rm. |
| 221 | 15.006 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). a) 100 mm dia | Item221 | 36 | Rm. |
| 222 | 15.007 | b) 50 mm dia | Item222 | 280 | Rm. |
| 223 | 15.008 | Supplying, fixing of bail plug of approved quality for 100mm dia MS bore pipe complete in all respect. | Item223 | 1 | Each |
| 224 | 15.009 | Supplying, fixing of G.I pipe 150 mm (as centre guide) of approved quality for 100 mm dia MS bore pipe complete in all respect. | Item224 | 7 | Rm. |
| 225 | 15.01 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).Threaded End Cap 150 mm | Item225 | 1 | Each |
| 226 | 15.011 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. | Item226 | 4 | Day |
| 227 | 15.012 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. | Item227 | 2 | Cum. |
| 228 | 15.013 | Geophysical investigation of the aquifer by electro logging system with all tools and plants as necessary including supply of necessary report. | Item228 | 1 | Each |
| 229 | 15.014 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. A) 75 mm dia. | Item229 | 1 | Each |
| 230 | 15.015 | Supplying, fitting and fixing 15 mm dia. galv. M.S. connecting rod with sockets. | Item230 | 40.62 | Rm. |
| 231 | 15.016 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 4000 litre capacity | Item231 | 1 | Each |
| 232 | 15.017 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work - PVC Pipes 32 mm | Item232 | 25 | Metre |
| 233 | 15.018 | 25 mm | Item233 | 35 | Metre |
| 234 | 15.019 | Supplying, fitting and fixing pillar cock of approved make. | Item234 | ||
| 235 | 15.02 | c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). | Item235 | 2 | Each |
| 236 | 15.021 | Supplying, fitting and fixing bib cock or stop cock. (d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). | Item236 | 2 | Each |
| 237 | 15.022 | Supplying, fitting and fixing Waste fittings complete.(i) 32 mm | Item237 | 2 | Each |
| 238 | 15.023 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).\n(vi) 32 mm dia | Item238 | 2 | Each |
| 239 | 15.024 | (vii) 25 mm dia | Item239 | 2 | each |
| 240 | 15.025 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : a) 32 mm nominal bore, vertical | Item240 | 1 | each |
| 241 | 15.026 | Supplying, fitting and fixing S.W. master trap.\n(ii) 225 mm X 225 mm | Item241 | 3 | each |
| 242 | 15.027 | Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange\n | Item242 | 3 | each |
| 243 | 15.028 | Supplying, fitting & fixing of approved brand 15 mm dia. PVC connector(600mm long) with both end coupling nuts & washers, etc. complete in all respects. | Item243 | 4 | nos. |
| 244 | 15.029 | Fitting & fixing of PVC waste pipe to be concealed in wall & floor with necessery specials clamps etc. complete. From bottle trap to floor trap (for basin, sink etc) (length approx. 2000 mm). A) 32mm dia | Item244 | 14 | Rm |
| 245 | 15.03 | Supplying, fitting and fixing special hand pump no. 6 of approved make (for 50 mm or 40 mm dia. tube well). | Item245 | 1 | each |
| 246 | 15.031 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved\nquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (i) 450 mm X 300 mm size | Item246 | 2 | each |
| 247 | 15.032 | Supplying, installing, testing, commissioning of SS submersible pump(75mm) each pump shall have 1.5 HP capacity with coupling, coupling guard & all necessary fittings. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary cables, ancillaries, valves, header (G.I. Tata Heavy) suitable control panel, high & low level controller & accessories including base plate complete as required. | Item247 | 1 | Nos. |
| 248 | 15.033 | Supplying, installing, good quality Aquaguard under instruction & satisfaction of Engineer-in-charge. | Item248 | 1 | Nos. |
| 249 | 15.034 | Installation of C.C.TV. & PA System | Item249 | ||
| 250 | 15.035 | Supply & Installation of 3 MP Bullet Camera (IP) of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item250 | 14 | Nos. |
| 251 | 15.036 | Supply & Installation of 2 MP Dome Camera (IP) of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item251 | 4 | Nos. |
| 252 | 15.037 | Supply & Installation of 16 Port NVR of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item252 | 1 | No. |
| 253 | 15.038 | Supply & Installation of Cable with PVC conduit or placing above false ceiling of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item253 | 5 | Coil |
| 254 | 15.039 | Supply & Installation of 6 TB HDD of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item254 | 1 | No. |
| 255 | 15.04 | Supply & Installation of Spliter, PVC box, RJ45, Cable etc. of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item255 | 1 | Item |
| 256 | 15.041 | Supply, Installation & interconnecting the cameras with 24 port switch including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item256 | 1 | Item |
| 257 | 15.042 | Supply & Installation of good quality LED display 43" including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item257 | 1 | Nos. |
| 258 | 15.043 | Supply & Installation of good quality LAN rack including necessary accessories of approved make & brand all complete as per direction & satisfaction of the Engineer in charge. | Item258 | 1 | Item |
| 259 | 15.044 | Supply & Installation interconnecting with Disply, Cameras & NVR for successful operation of the total system all complete as per direction & satisfaction of the Engineer in charge. | Item259 | 1 | Item |
| 260 | 15.045 | Supply, installation of controller Unit (BOSCH PHILIPS) / Amplifier as per direction of E.I.C. | Item260 | 1 | Item |
| 261 | 15.046 | Supply of Wireless hand held vocal microphones featuring high feedbac rejection, mute button for full speech control, syncronixation via RF remote channel frequencies tunable in steps of 25 KHz 24 MHz bandwidth, 8 frequency banks with each max 12 presets as per direction of E.I.C. | Item261 | 2 | Item |
| 262 | 15.047 | Supply & installation of speaker of approved make and brand including necessary arrangement of erecting the box on the post and cable for wiring all complete as per direction of EIC. | Item262 | 20 | Item |
| 263 | 15.048 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light post all complete 50 W outdoor LED Flood Light marine grade for illuminating Pontoon and gangway river end under instruction & satisfaction of Engineer-in-charge. | Item263 | 8 | Item |
| 264 | 15.049 | Supply installation fitting-fixing and testing including necessary arrangement of erecting the light all complete 20 W outdoor LED Light marine grade for link platform, passenger shed, toilet block and under instruction & satisfaction of Engineer-in-charge. | Item264 | 30 | Item |
| 265 | 15.05 | Supply, system installation, testing, commissioning including Cables and Accessories with marine grade materials for lighting of the Pontoon jetty and gangway including passenger shed and toilet as per direction and satisfaction of E.I.C. | Item265 | 36 | Item |
| 266 | 15.051 | Bank protection work surrounding the jetty | Item266 | ||
| 267 | 15.052 | Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed.(Diameter of pile to be measured at a distance of 1.5m from the thicker end.)ii) 125 mm diameter . | Item267 | 900 | M |
| 268 | 15.053 | iii) 150 mm diameter . | Item268 | 1200 | M |
| 269 | 15.054 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge.\n(a) Double coat. | Item269 | 525 | Sqm. |
| 270 | 15.055 | Labour for driving Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. ii) 125 mm diameter .\n | Item270 | 500 | M |
| 271 | 15.056 | iii) 150 mm diameter . | Item271 | 900 | M |
| 272 | 15.057 | Supplying, fitting and fixing M.S iron shoe to Jhaw / Eucalyptus bullah piles including necessary cleats, nails etc. complete. \na) For bullahs above 10 cm & up to 20 cm av. Diameter. | Item272 | 225 | Each |
| 273 | 15.058 | Labour for fitting and fixing iron nails half split bullah wailing pieces and cross pieces etc. complete including cost of nails only complete as per direction of the Engineer-in-charge. \nJhaw / Eucalyptus. \nb) Width of thinner ind above 15 cm. | Item273 | 45 | M |
| 274 | 15.059 | Making sausages Square or Rectangular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside with 10 S.W.G. galvanised square pattern (internal dimension of mesh will be 100 m.m. x 100 m.m. square) galvanised wirenet caging with proper lapping of minimum 150 m.m. and sewing with 12 S.W.G galvanised wire including cost of all materials, carriage up to site, placing and laying the same in position, after preparing the bed to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces.) \nc) 0.60 metre x 0.60 metre nominal section | Item274 | 15 | M |
| 275 | 15.06 | i) 0.75 metre x 0.45 metre nominal section | Item275 | 20 | M |
| 276 | 15.061 | k) 0.90 metre x 0.60 metre nominal section | Item276 | 30 | M |
| 277 | 15.062 | Supplying to site and pitching with 1st class kiln burnt or picked jhama bricks including dressing, ramming and preparing bed to proper slope complete with necessary earth work not exceeding 300 m.m. in depth and filling gaps with powdered earth or local sand etc. complete (The rate is including cost of sand). \ni) With 1st class kiln burnt brick \nd) 25.00 cm thick | Item277 | 50 | Sqm. |
| 278 | 15.063 | Supplying, fitting and fixing pieces for rectangular / square / circular asusages at the ends, with 10 SWG / 8 SWG GI wire net of different mesh sizes tying & sewing the same maintaning a lap length of 150 mm all around with 12 SWG GI wire complete, including the cost of supply of wire netting, fitting etc. complete as per direction of the Engineer-in-charge. \na) Mesh size 100mm x 100 mm with 10 SWG wire. | Item278 | 225 | Sqm. |
| 279 | 15.064 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates (stone / brick) and sewing as done in case of cement bags, (tying with a knot after filling will nbot be accepted), and stacking within a kead if 30 netre as per direction of Engineer-in-charge (cost is excluding the cost of any types of filling materials). NB: Volume of earth / sand filled bags should not be less than 0.028 cum/bag. | Item279 | 600 | Bag |
| 280 | 15.065 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. | Item280 | 600 | Bag |
| 281 | 15.066 | Providing and laying pre-cast brick block pitching of required size (53 cm. x 53 cm. x 25 cm. or as directed by the Engineer-in-charge) with 1st class kiln burnt bricks in cement mortar including flush pointin on all faces except exposed face which to be plastered with 19 m.m. thick cement plaster, curin, dressing, ramming & preparing subgrade in slopes & bed complete with necessary earth work not exceeding 300 mm in depth with all leads & lifts including cost of all materials / blocks up to site by all means of transport. The gap between adjacent blocks will not be more than 10 m.m. (Sand, cement mortar mix for making blocks, pointing & plastering is 1:4) | Item281 | 92 | Cum. |
| 282 | 15.067 | Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooeen malllet after laying to achieve designed section as per direction of the Engineer-in-charge (measurements will be on finished work / in stack after deducting necessary void).a) Jhama ballast | Item282 | 60 | Cum. |
| 283 | 15.068 | Supplying to site empty cement polythene bags (capacity 50 kg.) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg.) | Item283 | 600 | Each |
| 284 | 15.069 | Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. Silver Sand. Stacked at site. | Item284 | 400 | Cum |
| 285 | 15.07 | Earth work in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. \na) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. | Item285 | 24.84 | Cum. |
| 286 | 15.071 | Upgradation of Ticket counter | Item286 | ||
| 287 | 15.072 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.SAIL/ TATA/RINL | Item287 | 3.254 | M.T. |
| 288 | 15.073 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.\n | Item288 | 20 | Cum. |
| 289 | 15.074 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (A) M 25 Grade. | Item289 | 25 | Cum. |
| 290 | 15.075 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. | Item290 | 15 | Cum. |
| 291 | 15.076 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. | Item291 | 70 | Sqm. |
| 292 | 15.077 | Brick work with 1st class bricks in cement mortar (1:4).(a) In superstructure, ground floor. | Item292 | 20 | Cum. |
| 293 | 15.078 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | Item293 | 10 | Cum. |
| 294 | 15.079 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\n(a) With 4 : 1 cement mortar.\n(i) 19 mm thick plaster.\n\n | Item294 | 70 | Sqm. |
| 295 | 15.08 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | Item295 | 50 | Sqm. |
| 296 | 15.081 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Soling or dry pavement with one brick-on-edge laid in herring bone pattern over a layer of brick flat (thickness 125 mm plus 75 mm) | Item296 | 12 | Sqm. |
| 297 | 15.082 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item297 | 20 | SQM. |
| 298 | 15.083 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface: With super gloss (hi-gloss). Two coats ( with any shade except white).\n | Item298 | 25 | SQM. |
| 299 | 15.084 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item299 | 12.28 | SQM. |
| 300 | 15.085 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coats ( with any shade except white) | Item300 | 25 | SQM. |
| 301 | 15.086 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Two Coats.\n | Item301 | 25 | SQM. |
| 302 | 15.087 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:Two coats. | Item302 | 50 | SQM. |
| 303 | 15.088 | Construction of Bio-Toilet (1.3m x 1.3m) with good quality tap and basin for Passengers under instruction & satisfaction of Engineer-in-charge. | Item303 | 2 | Item |
| 304 | 15.089 | Upgradation of Passenger shed, Passenger ammenities etc. | Item304 | ||
| 305 | 15.09 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.SAIL/ TATA/RINL | Item305 | 2 | M.T. |
| 306 | 15.091 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.\n | Item306 | 5 | Cum. |
| 307 | 15.092 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (A) M 25 Grade. | Item307 | 12 | Cum. |
| 308 | 15.093 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. | Item308 | 10 | Cum. |
| 309 | 15.094 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) Steel shuttering or 9 to 12 mm thick\napproved quality ply board shuttering in any concrete work. | Item309 | 44.4 | Sqm. |
| 310 | 15.095 | Brick work with 1st class bricks in cement mortar (1:4).(a) In superstructure, ground floor. | Item310 | 22.83 | Cum. |
| 311 | 15.096 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | Item311 | 15 | Cum. |
| 312 | 15.097 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 4 : 1 cement mortar.\n(i) 19 mm thick plaster. | Item312 | 60 | Sqm. |
| 313 | 15.098 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | Item313 | 15.04 | Sqm. |
| 314 | 15.099 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Soling or dry pavement with one brick-on-edge laid in herring bone pattern over a layer of brick flat (thickness 125 mm plus 75 mm) | Item314 | 18 | Sqm. |
| 315 | 15.1 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item315 | 20.65 | SQM. |
| 316 | 15.101 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface: With super gloss (hi-gloss). Two coats ( with any shade except white).\n | Item316 | 20 | SQM. |
| 317 | 15.102 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | Item317 | 10 | SQM. |
| 318 | 15.103 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coats ( with any shade except white) | Item318 | 10 | SQM. |
| 319 | 15.104 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Two Coats.\n | Item319 | 12 | SQM. |
| 320 | 15.105 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:Two coats. | Item320 | 12 | SQM. |
| 321 | 15.106 | Electrical wiring & fixing of light fitting as per ship building practice, 4(four) nos. flood lights FWD & aft. 25 nos. deck light on Link platform walk way under instruction & satisfaction of engineer-in-charge. i) Wiring | Item321 | 822.4 | M |
| 322 | 15.107 | ii) Flood light | Item322 | 4 | Nos. |
| 323 | 15.108 | iii)Gangway light | Item323 | 40 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
